Patton electronics 531 Operation & User’s Manual
Text of the manual
USER
MANUA L
MODEL 531
Ethernet (ThinNet)
Surge Protectors
SALES OFFICE
(301) 975-1000
TECHNICAL SUPPORT
(301) 975-1007
http://www.patton.com
Part# 07M531-B
Doc# 074051UB
Revised 12/18/96
2.0 GENERAL INFORMATION
Thank you for your purchase of this Patton Electronics product.
This product has been thoroughly inspected and tested and is
warranted for One Year parts and labor. If any questions arise during
installation or use of the unit, contact Patton Electronics Technical
Support: (301) 975-1007; http://www.patton.com; or,
support@patton.
3. Connect the braided ground strap directly to a frame ground
connection on the protected device. If you are unsure where to
locate a frame ground connection on your equipment, consult the
equipment’s user manual or contact the manufacturer - the ground
connection is critical for proper operation.
4
Coaxial input
from Network
Connection to
frame ground
PATTON MODEL 531 SPECIFICATIONS
Interface:
Ethernet (IEEE 802.3, ThinNet) BNC coaxial
Size:
2.0" long x 1.0" diameter
Circuit:
Bipolar, solid state protection on BNC
connectors
Response Time:
Less than 5 nanoseconds.
Input Capacitance:
18 pF
Clamp Voltage:
25 volts at 100A (8/20 µ waveform )
Surge Capacity:
400A (8/20 µ waveform )
Energy Handlin
