Sony BDV-E2100 Start Here Manual

Start here Quick start guide GB BDV-E3100

Connecting your TV Connecting other devices The on-screen Easy Setup Playback and using other functions BDV-E6100         BDV-E4100       BDV-E3100        BDV-E2100       

  Main unit   Front speakers   Surround speakers   Center speaker   Subwoofer Screws (large) (BDV-E6100 (4) /BDV-E4100 (2)) Screws (small) (BDV-E6100 (16) /BDV-E4100 (8)) Speaker-bottom covers (BDV-E6100 (4) /BDV-E4100 (2)) Remote FM wire antenna (aerial) R6 (size AA) batteries (2)

according to the labels on the rear panel.  You can also set the speakers in ALL FRONT  position. For further details, visit: http://support.sony-europe.com/   1

main unit. For BDV-E6100/BDV-E4100, refer to the supplied “Speaker Installation Guide” for assembling the speakers.

audio, connect via a High Speed HDMI cable  (not supplied). If your TV has no HDMI ARC jack, you also need an optical digital cord  (not supplied) to enjoy TV sound through the system speakers.   2

console, or digital satellite receiver, make an audio connection to the main unit with an optical digital cord  (not supplied). Separately, make a video connection to the TV. For FM radio, connect the supplied wire antenna (aerial) and extend it for the best reception.    3

and home network via a wireless LAN or LAN cable  (not supplied). Network settings can be found in the home menu (page 12). For further details, visit: http://support.sony-europe.com/ Connect the AC power cord (mains lead)  to a wall outlet (mains). To a broadband router   3

“SETUP” appears in the front panel display. To ready the system for use, go through the on-screen Easy Initial Settings using the supplied remote. This should only take a few minutes. If the setup screen is not displayed, select the correct AV input in your TV. Once [Easy Initial Settings are complete.] appears on the screen, select [Finish] and the system is ready to use. 4

the disc on the disc tray. Press  again to close the disc tray. If playback does not start automatically, select in the [Video], [Music], or [Photo] category, and press .   5

smartphone, etc., via Bluetooth communication from your system. You can pair/connect your Bluetooth device by either: BLUETOOTH    pressing the BLUETOOTH button, or  using the NFC function (for NFC compatible devices only). Download the application and simply hold your device near to the N mark on the main unit. For further details, visit: http://support.sony-europe.com/

HOME. Examples:  Listen to the radio through the system’s speakers  Preset radio stations  Access Internet content  Play files on the connected USB device          HOME You can make network settings via this menu when the main unit is connected to a broadband router.

1 Press FUNCTION repeatedly until “FM” appears in the front panel display. 2 Press and hold TUNING +/– until auto scanning starts. 3 Press OPTIONS. 4 Press / to select [Preset Memory], then press . 5 Press / to select the preset number you want, then press . 6 Repeat Steps 2 to 5 to store other stations. Selecting a preset station 1 Press FUNCTION repeatedly until “FM” appears in the front panel display. 2 Press PRESET +/– repeatedly to select the preset station. FUNCTION TUNING +/– OPTIONS PRESET +/– HOME ///,

the system, use this troubleshooting guide to help remedy the problem before requesting repairs. Also consult the Operating Instructions on the following website: http://support.sony-europe.com/ The power does not turn on. ‚ ‚Check that the AC power cord (mains lead) is securely connected to the wall outlet (mains). The system does not work normally. ‚ ‚Disconnect the AC power cord (mains lead) from the wall outlet (mains), then reconnect after several minutes. The system does not output sound of the TV program when connected to a set-top box. ‚ ‚Check the connections. ‚ ‚Select the correct input of the system to which the set-top box is connected. A disc does not play. ‚ ‚The region code of the disc does not match the system. ‚ ‚Moisture has condensed on the lenses inside the main unit. Remove the disc and leave the main unit turned on for about half an hour. ‚ ‚The disc is not correctly finalized. Reducing power usage to less than 0.3 W in Standby Mode Press HOME, and then press /// to select [Setup]. Check that the following settings are made: ˎ ˎ Select [System Settings] > [HDMI Settings] > [Control for HDMI], then set [Control for HDMI] to [Off]. ˎ ˎ Select [System Settings] > [Quick Start Mode], then set [Quick Start Mode] to [Off]. ˎ ˎ Select [Network Settings] > [Remote Start], then set [Remote Start] to [Off].

To save natural resources, Sony has drastically reduced paper by no longer including full printed manuals. However, full operating instructions, and more, can be found online: http://support.sony-europe.com/ 2013 Sony Corporation Printed in Malaysia 4-446-740-11(1) (1)