Harbor Freight Tools 47613 Assembly And Operating Instructions Manual

in. Carrying power tools with your finger on the Power Switch, or plugging in power tools with the Power Switch on, invites accidents. 13. Remove adjusting keys or wrenches before turning the power tool on. A wrench or a key that is left attached to a rotating part of the power tool may result in personal injury. 14. Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the power tool in unexpected situations. 15. Use safety equipment. Always wear ...

near the tool’s moving parts. 12. Never operate without automatic guard return in place. Do not disable blade guard when cutting. 13. Guard against kickback. Kickback occurs when the saw stalls and is driven backwards toward the operator. When this happens, release trigger switch immediately. 14. Unplug Circular Saw Line Cord before making adjustments. 15. When operating, keep Line Cord away from the cutting area. 16. Never operate the Circular Saw with its saw blade facing upward. 17. After cutting, wait fo ...

Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of one year from the date of purchase (90 days if used by a professional contractor or if used as rental equipment). This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, normal wear and tear, or to lack of maintenance. We shall in no ...

1. Support large panels to minimize risk of blade pinching and saw kickback. 2. Use the supplied Rip Guide (402) when ripping material by sliding it into the Base Assy. and tightening Wing Bold (58). See Figures F and G below. 3. Securely clamp material to be cut to work bench. 4. Make sure saw does not cut into supports or workbench. 5. Use the appropriate type of blade for the material you are cutting. Wing Nut (60) Base Assy. (52) Lock Handle (55) Brush Cap (30) Wing Bolt (58) Side Handle (401) Figure D Figure E Figure F Figure G SKU 47613 Page 11 ...