Pfaff 300 e Operation & User’s Manual

space before pressing the start button to assure that the hoop has suffi cient space to move freely. Start/Stop Button Press this button once to start the machine. Press it again to stop the machine. Note: Before pressing the start button, check to be sure that there are no objects other than the fabric to be embroidered under the needle. Presser foot Lift The presser foot is raised and lowered with the presser foot lift. When embroidering the presser foot must be down. This engages the top tension. ...

• Do not pull or push fabric while stitching. It may defl ect the needle causing it to break. • Switch the Sewing machine off (“0”) when making any adjustment in the needle area, such as threading needle, changing needle, threading bobbin, or changing presser foot, etc. • Always unplug Sewing machine from the electrical outlet when removing covers, lubricating, or when making any other user servicing adjustments mentioned in the instruction manual. • Never drop or insert any object into any opening. • Do not use outdoors. • Do not operate where aer ...

1. To run the program, the machine should be turned on with the USB cable attached. 2. Click on the 3D Embroidery Intro icon on your desktop. 3. The opening screen of the 3D Embroidery Intro software appears with the Navigator screen on top of it (Fig. St-1). On the software screen, go to File, Open and select C:/3DEmbroidery Intro/Samples/3D Emb1/ Holidays/Heart 1. Open design Heart 1. 4. Click on the Send icon from the top tool bar and choose Send to Machine Memory. In the Navigator screen, click on the square labeled No Design ( ...

computer Once you have saved embroideries into the machine you can use the machine without being connected to the computer. 1. To embroider a design, use the directional buttons to move to the design that you want to embroider. 2. Touch the Select Design button to choose your design. 3. Thread your machine as describe on pages 15-17. 4. Touch the Start/Sop button to begin your embroidery. ...