Pfaff 28 Instruction Book

with Beak Shutt%e INSTRUCTION BOOK G. M. PFAFF AG, Sewing Machine Factory, KAISERSLAUTERN ...

2. Engaging and Disengaging the Sewing Mechanism Bobbin Case 3. Threading the Needle 4, Winding the Bobbin 5. Changing the Bobbin and Threading the 6. Drawing Up the Bobbin Thread 7. Regulating the Thread Tensans 8. Regulating the Pressure an the Material 9. Ch.oosng the Proper Needle 10. Inserti ...

Fitted with standard or extra large beak shuttle, link fake-up, knee lever presser foot lifter, reversible drop feed, wooden extension or iron screw-on work support for flat seaming oper ations, provided for foot, individual motor or power bench drive ...

Unless shipped directly, every sewing machine, when received at our dealers, is unpacked, carefully checked for possible damage inflicted in transit, cleaned, and tested for perfect sewing before being released For delivery to the customer. 2. Engaging and Disengaging the Sewing Mechanism Two varieties of the PFAFF 28 are available ...

As shown in photo 2, pass the thread from spool 1 through the three slotted holes of thread guide 2, around and between the tension discs 3, through check spring 4, beneath guide 5, through eyelet 6, right-left through take-up 7, through eyelets 8 and 9, needle bar eyelet 10, and then left-right through needle eye 11. Note: As with al ...

All PEAFF 28 machines are equipped with a table winder which hos proved very useful in all sewing shops. As shown in photo 3, place spool 1 on pin 2, and the empty bobbin on spindle 6. Pass the thread from spool 1 through the hole 3, between tenson discs 4, over pin 5, and through the slot in the face of the bobbin. By press ng down eng ...

Raise the shuttle race cop by slightly pushing it up with thumb and index finger of your left hand so that it can be slipped over the head of screw a (see photo 4), then let it hong by the hinge screw. Turn the balance wheel until the beak shuttle is in is extreme right-hand position. The b ak shuttle can ...

Basic Role: Stop the machine or commence sewing only with the take.up in its highest position. This precaution will keep the thread from slipping out of the needle eye and will prevent jamming of the thread in the shuttle roce. In this case it is not necessary to hold the needle and bobbin threads when commenc ...

driver. Turning tension screw d (see photo 8) clockwise , will increase the tension; turning it coueter-clockwise -< will decrease the tension. Since most of the stitching work done on the PFAFF 28 coIls not only for perfect but also for strong and durable seams, the thread tensions must be r ...