Philips DC200/79 Quick Start

www.philips.com/welcome Docking Entertainment System DC200 QUICK START Thanks for buying Philips DC200 Docking Entertainment System. Our Quick Start guides you through just some of the features on the set. Please read our instruction booklet to really rise & shine!

set's 9V DC jack and the plug into a wall outlet. Step B How to set the Clock & Alarm time Press and hold SET TIME or 1 ALM/2 ALM until the hour digits fl ash. Press and hold ∞ § to adjust time. Press SET TIME or 1 ALM/2 ALM to confi rm. Repeat the steps 2-3 to complete all the other time items setting. Selecting the Alarm mode 4. Press ∞ §/SOURCE repeatedly to select your desired alarm mode. For Nature sound mode, press ALBUM/PRESET -/+ 1 / 2 to select your desired nature sound track. Helpful hints: If you have selected TUNER alarm mode, make sure you have properly tuned to a station before turning off the set (See Tuning to radio station). If you have selected iPod/USB alarm mode, make sure you have connected the compatible iPod player or USB device, or the buzzer mode will be selected automatically. 3 ways to switch off the alarm Either press briefl y: POWER 2 or REPEAT ALARM/BRIGHTNESS CONTROL. Press 1 ALM or 2 ALM. Step C Tuning to radio station Press SOURCE once or more to switch on the radio. Press ∞ § repeatedly to tune to your station. • 1. 2. 3. • • – – • • 1. 2. To store a preset, press PROG to activate the programming, and then press ALBUM/PRESET -/+ 1 / 2 to select a desired preset number, and then press PROG again to confi rm. To store preset radio stations automatically, press and hold PROG for more than two seconds. Step D Playing Apple iPod using DC200 Remove the top cover of dock. Snap the correct adaptor (supplied) into the dock to provide a snug fi t for the iPod player. The indication on the adaptor’s back fi ts specifi c iPod player. 3. Snap the compatible iPod into the dock connector. 4. Press SOURCE repeatedly to select the iPod mode. The connected player will play automatically. Helpful hints: By using the buttons ( 2;, ∞, § and VOLUME ) on the DC200, the following iPod playback features are available: Play/Pause, selecting next/previous track, fast forwarding/ rewinding and changing volume. Refer to the user manual supplied for detailed descriptions of “Compatible portable player”, “Selecting the correct dock adaptor” and the important notes for dock operation. Step E Playing a USB mass storage device Make sure that your DC200 is being powered by AC mains. Press SOURCE repeatedly to select the USB mode. Plug a compatible USB mass storage device to DC200’s USB port marked . Playback will start automatically. • • 1. 2. • • – – 1. 2. 3. ➜ DC 9V A B1, B3 3 C2 C1, D4, E2 3 D1, D2, D3 E3 B2, B4, C2