Philips SE4502B/17 Operation & User’s Manual

finished inputting both the prefix and suffix codes. 11.3.2 Change Call Forward when Unanswered Deactivation Code 1 Press m in idle mode, scroll n to Netw. Services, and press o Select. 2 Scroll n to Call Fwd Unans and press o Select. 3 Scroll n to Change Code and press o Select. 4 Scroll n to Deactivation and press o Select. 5 Enter the deactivation code (maximum 14 digits) and press o OK. • A confirmation tone will sound and the display will return to the Call Fwd Unans screen. Press c Clear to delete entered numbers. Long press c Clear ...

1 Press m in idle mode, scroll n to Netw. Services, and press o Select. 2 Scroll n to Info and press o Select. 3 You are now at the Info menu and Call is highlighted. Press o Select to connect to the information service account number. 11.6.2 Set Info Service Number 1 Press m in idle mode, scroll n to Netw. Services, and press o Select. 2 Scroll n to Info and press o Select. 3 Scroll n to Settings and press o Select. 4 Enter the information service account number (maximum 14 digits) and press o OK. • A confirmation tone will sound and the display ...

All rights reserved Reproduction in whole or in part is prohibited without the written consent of the copyright owner Document order number: 3111 285 45511 (US-EN) ...

the screen returns to the Advanced Set menu. If no detect string (blank) is entered, the prefix number will be automatically added to the predial number after t is pressed. For numbers starting with *, # or P, the prefix number will not be added to the predial number after t is pressed. 10.11 Change Flash time Flash time is the time delay by which the line will be disconnected after you press the t key. It can be set to short or long. The default value is Long. 1 Press m in idle mode, scroll n to Advanced Set, and press o Select. 2 Scro ...

3.2 Electric, Magnetic and Electromagnetic Fields (“EMF”) 1. Philips Royal Electronics manufactures and sells many consumer oriented products which usually, as with any electronic apparatus, have the ability to emit and receive electro magnetic signals. 2. One of Philips’ leading Business Principles is to take all necessary health and safety precautions for our products, to comply with all applicable legal requirements and to stay well within the EMF standards applicable at the time of producing the products. 3. Philips is committed to develop, produce and market produ ...

8.7.4 Delete a redial number 1 Press r in idle mode, scroll n to select an entry and press o Menu. 2 Scroll n to Delete and press o Select. 3 Delete? is displayed on the screen. 4 Press o OK to confirm deletion. • A validation tone is emitted. Press c Back to discard the deletion. The screen returns to the previous menu. 8.7.5 Delete all redial numbers 1 Press r in idle mode, and press o Menu. 2 Scroll n to Delete All and press o Select. 3 Delete All? is displayed on the screen. 4 Press o OK to confirm deletion. • A validation tone is emitted. 8.8 Call waiting If ...

polarity as indicated and replace the cover. 6.3.2 Charge battery The handset must be charged for at least 24 hours before using it for the first time. When the battery level becomes low, the low battery sensor warns you by blinking the battery icon. If this occurs during a conversation, an alert tone sounds to inform you that the battery is low. If the battery level becomes exceedingly low, the phone automatically switches off shortly after the icon starts blinking and any function in progress will not be saved. 1 Place the handset on th ...

1 Place the base station in a central location near the telephone line socket and electricity socket. 2 Connect the line cord and the power cable to their corresponding connectors at the back of the base station. 3 Connect the other end of the line cord and power cable to their respective sockets . The line adaptor may not be attached to the line cord. In this case, you have to connect the line adaptor to the line cord first before plugging the line cord to the line socket. Avoid placing the base station too close to large metal ...