Philips SE6582B/37 Operation & User’s Manual

17.3 Sound Handset does not ring! Check that the Ring Volume is not set to no bars (Ringer Off), and make sure the icon is not displayed on the screen (see section 12.2.1 - “Set the Ring Volume”). Caller does not hear me! Microphone may be muted: During a call, press s. There’s no dialling tone! • No power: Check the connections. • Batteries are empty: Charge the batteries. • Move closer to the base station. • Wrong line cable used: Use the line cable provided. • Line adaptor is required: Connect the line adaptor to the line cord. Caller does not ...

8 Using your phone 8.1 Make a call 8.1.1 Predialling 1 Enter the number. (A maximum of 24 digits including * and # are allowed. Press c Clear to delete the last digit.) Or long press to delete all. 2 From the handset: Press t. (Or press l on the handset to start a call in speaker mode.) From the base: Press l. • The call is initiated. 8.1.2 Direct dialling 1 From the handset: Pick up the handset and press t. (Or press l on the handset to start a call in speaker mode.) From the base: Press l. 2 Dial the number. • The call is initiated. 8.1.3 Call from redial list 1 Press ...

10 Using your Phonebook Your phone can store up to 200 phonebook entries. Each phonebook entry can have a maximum of 24 digits for the phone number and 14 characters for the name. All names and numbers in the phonebook must be unique. Only one unit (handset or base station) can access the phonebook at a time. 10.1 Store a contact in the phonebook 1 Press m in idle mode. Phonebook is highlighted. Press o Select. 2 New Entry is highlighted. Press o Select. 3 Enter Name is displayed. Enter the name of the contact (maximum 14 characters) and press o OK. 4 Enter Number is di ...

cradle of the base station. A beep is emitted if the handset is placed correctly. 2 The battery icon on the display blinks during charge. 3 The battery icon becomes steady when the handset is fully charged. Optimal battery life is reached after 3 cycles of complete charging (over 15 hours) and discharging, allowing approximately 12 hours of talk-time and 150 hours of stand-by time. The indoor and outdoor range of the phone is up to 50 metres and 300 metres respectively. When the handset moves beyond the operation range, the antenna icon ...

12.1 Change the Handset Name (Handset only) You can name the handset and display the handset name in idle mode. The default handset name of your handset is Philips. 1 Press m in idle mode, scroll n to Personal Set and press o Select. 2 Handset Name is highlighted. Press o Select. 3 The last stored name is displayed. Press c Clear to delete the characters one by one or a long press to delete all. 4 Enter the new name and press o OK to confirm. • A validation tone is emitted and the screen returns to the Personal Set menu. 12.2 Ring Settings 12.2.1 Set ...

press o Select. 3 Scroll n to Change Code and press o Select. 4 Scroll n to Deactivation and press o Select. 5 Enter the deactivation code (maximum 14 digits) and press o OK. • A confirmation tone will sound and the display will return to the Call Forward screen. Press c Clear to delete entered numbers. Long press c Clear to clear the entire entry. 14.2 Call Forward when Busy This function will forward incoming calls to another number if the line is busy. You can activate or deactivate Call Forward when Busy as follows: 1 Press m in idle mode ...

Save call list entry 46 Select phonebook melody 43 Select the Color Theme 49 Select the Display Wallpaper 48 Set a Call Barring number 51 Set Alarm 41 Set Alarm Tone 41 Set Auto Prefix 54 Set Call Barring Mode 51 Set Call Return Service Number 61 Set Date and Time 40 Set Date Format 41 Set Easy Call number 50 Set Easy Call to On or Off 50 Set First Ring Detection 55 Set Info Service Number 61 Set the Answer mode 65 Set the Backlight Time 49 Set the Cancel Call Back Number 62 Set the Display Contrast 49 Set the Ring Tones 47 Set the Ring Volume 47 Set the With ...

Access phonebook 42 Access Redial list 35 Access the Call log 45 Access the Call Return Service 61 Activate/Deactivate handset loudspeaker mode 38 Activate/Deactivate Remote Access 66 Activating Withhold ID 62 Adjust earpiece or speaker volume 38 Advanced settings 50 Advanced Settings menu tree 30 Answer a call 34 Answer an external call during intercom 39 Answer Machine menu tree 32 Answering Machine Settings 65 Auto Conference 50 Auto hang-up 49 Auto Prefix 54 B Backlight timing 49 Base station 20 Batteries 24 C Call Barring 51 Call Forward 57 Call ...