Sony TCD D8 - Portable DAT Recorder Operating Instructions Manual

Operating Instructions page 2EN Mode d’emploi page 2F TCD-D8 EN F ...

corder! Your DAT tape-corder has the following features, they will be helpful for you to enjoy it to the full. • Superb DAT sound quality with excellent frequency response, low noise, and lack of distortion. • Easy DAT operation with high speed fast- forward/rewind and cue/review. • Long- ...

Inserting the Batteries ................................ 4 Setting the Clock ......................................... 5 Inserting the Cassette ................................. 6 Recording..................................................... 8 Locating the point at which to begin recording.............................. ...

lid. 2 Remove the battery holder. 3 Insert 4 new alkaline batteries into the battery holder. Make sure that the batteries are facing the correct directions. 4 Insert the battery holder with the alkaline batteries and close the compartment lid. The LCD display appears when the batteries are inserted. Inserting the Batteries ...

Set the clock before starting any recording operations to stamp the date and time. Otherwise, you cannot get the correct date and time. The clock will return to its default setting (SU/95Y1M1D/ AM12H00M00S) if the batteries are removed from the unit for one hour or more. In this case, set the clock again. Setting the Clock Make sure th ...

Inserting the Cassette 1 Open the cassette compartment lid. 1 Press the HOLD/PUSH OPEN switch and slide to OPEN. Release the switch when the cassette compartment lid opens slightly. 2 Open the cassette compartment lid. 2 Insert the cassette. Insert the cassette with the window facing up. When the cassette is inserted upside down, ...

To eject the cassette While the tape-corder is in the stop mode, press the HOLD/PUSH OPEN switch and slide to OPEN. To protect your recording Slide open the record-protect shutter to record-protect your tape. Notes on DAT cassettes • Unlike conventional analog cassettes, playback and recording are applicable on one side of the c ...

REC PAUSE P Refer to page 15 for “Connecting with Other Equipment for Recording”. Locating the point at which to begin recording The absolute time is automatically written simultaneously while recording. The absolute time is indicated as the length of time fro ...

“— —” indicates an unrecorded segment. Press the =/0 button to rewind the tape until “— —” stops flashing. Then, press the )/+ button to locate the end of the previous recording. Recording from a microphone 1 Insert a cassette and locate the point at which to begin recording. ...

Check the input source in the stop mode REC twice in the recording pause REC mode Press the button until the following display appears. Check the sampling PLAY ( in the recording frequency mode The following display appears while the button is presse ...