Hasselblad CFH-39 Operation & User’s Manual

button ) repeatedly to successively access: A. Film speed (ISO / Bar Code) B. Film length (120/220/ Number of frames) C. Data (on/off) D. Frame counter (count down / count up) E. Low-battery warning symbol Film speed setting / Barcode The film speed (ISO / ASA) can be set automatically or manually. Automatic setting uses a Barcode (only some films have this feature, notably Fujifilm). This is the default setting.  Film settings (ISO / film length) are automatic only if the maga- zine is set at Barcode automatic. That is, a barcoded � ...

■ Central electronic shutter ■ Instant manual focus override with natural friction ■ Instant automatic-focus return capability ■ Non-rotation of filter or accessory when focusing ■ Non-rotation of lens barrel in automatic focusing mode ■ Shutter speeds 32 sec to 1/800 sec with flash sync ■ Reversed lens shade serves as protection ■ Automatic detection of extension rings and converters Lenses All HC lenses have been specially formulated for the H system to produce the extremely high performance expected from Hasselblad ...

Horseman ISS electronic shut- ter with lens control Rollei elec- tronic shut- ter with lens control View camera adapter for Hasselblad H1 (not available from Hassel- blad) Any view camera with Hasselblad H1 adapter Flash sync input cable Hasselblad CFH Connectivity diagram – CFH only Navigating the CAMERA settings ...

The H2/D is fitted with a Spherical Acute-Matte D viewfinder screen for extreme brightness, clarity and even illumination. An optional accessory screen with a grid pattern is also available. To change a viewfinder screen, remove the viewfinder to access the viewfinder screen. To remove the screen, place the tip of a ballpoint pen or similar in the viewfinder screen removal lug and pull upwards. To replace the screen, position the right side of the screen in place so that it sits correctly in th ...

be used with a Hasselblad H1 camera or with nearly any camera that has been fitted with an adapter for mounting Hasselblad film magazines. However, not all CFH features are available with camera bodies other than the H2. Although most of the information in this manual assumes that you are using an H2 camera, this section explains how to use the CFH with other types of camera bodies and describes how each solution differs from using an H2. Using with a Hasselblad H2 Attaching to a Ha ...

front section into place on the front edge of the viewfinder screen recess in the camera body ensuring the central locat- ing lug and databus interface are positioned correctly. Swing the viewfinder downwards and press firmly until it clicks into place. Ensure that both sides of the viewfinder are seated correctly. 14. Point the camera at a smooth toned area. Turn the eyesight adjustment dial until you achieve optimum sharpness of the markings on the viewfinder screen. .................... ...