Philips BDP7700 Operation & User’s Manual

This product incorporates proprietary technology under license from Verance Corporation and is protected by U.S. Patent 7,369,677 and other U.S. and worldwide patents issued and pending as well as copyright and trade secret protection for certain aspects of such technology. Cinavia is a trademark of Verance Corporation. Copyright 2004-2010 Verance Corporation. All rights reserved by Verance. Reverse engineering or disassembly is prohibited. Cinavia Notice This product uses Cinavia technology to limit the use of unauthorized copies of some commercially- produced film and videos and their soundtracks. When a prohibited use of an unauthorized copy is detected, a message will be displayed and playback or copying will be interrupted. More information about Cinavia technology is provided at the Cinavia Online Consumer Information Center at http://www.cinavia.com. To request additional information about Cinavia by mail, send a postcard with your mailing address to: Cinavia Consumer Information Center, P.O. Box 86851, San Diego, CA, 92138, USA. Before you connect this Blu-ray disc/ DVD player, read and understand all accompanying instructions.

www.philips.com/welcome EN User manual BDP7700 BDP7700 PC & Mac ( ) HDMI VIDEO VIDEO COAXIAL OPTICAL 5.1CH 7.1CH 2CH 1

2-7 2 Use your Blu-ray disc/ DVD player  10 Basic play control   10 Video, audio and picture options   11 DivX videos   12 Synchronize audio with video   12 Play a musical slideshow   12 BonusView on Blu-ray   13 BD-Live on Blu-ray   13 Play a Blu-ray 3D video   13 View 2D video/picure in 3D effect   14 Set up a network   14 Smartphone control   15 Browse PC through DLNA   15 Browse Smart TV   15 Rent online videos   16 Skype   16 Use a USB keyboard or mouse   17 Use Philips EasyLink   17 Stream media from an Android device   18 3 Change settings   19 Picture   19 Sound   19 Network (installation, Smart TV...)   20 Preference (languages, parental control...)   20 Advanced options (clear memory...)   21 4 Update software   22 Update software via the Internet   22 Update software via USB   22 5 Specifications   23 6 Troubleshooting   24

ray disc/ DVD player Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers (e.g. product software upgrade), register your product at www.philips.com/welcome. Basic play control During play, press the following buttons to control. Button Action Turn on the player, or switch to standby. Access the home menu. / Stop play. Press and hold (more than 4 seconds) to open or close the disc compartment. Pause play. Press repeatedly to slow forward frame by frame. Start or resume play. / Skip to the previous or next track, chapter or file. / Fast backward or forward. Press repeatedly to change the search speed. Press once, and then press to slow forward. AUDIO Select an audio language or channel. SUBTITLE Select a subtitle language. DISC MENU / POP-UP MENU Access or exit the disc menu. TOP MENU Access the main menu of a video disc. Color buttons Select tasks or options for Blu-ray discs. Navigate the menus. Press to rotate a picture clockwise or counter-clockwise during slideshow. OK Confirm a selection or entry. Return to a previous display menu. Access more options during play.

options More options are available for video or picture play from a disc or USB storage device. Video options Access more options during video play. • [Audio language]: Select an audio language. • [Subtitle Language]: Select a subtitle language. • [Subtitle shift]: Change the subtitle position on the screen. Press to change the subtitle position. • [Info]: Display play information. • [Character set]: Select a character set that supports the DivX video subtitle (only for DivX videos). • [Time search]: Skip to a specific time via the numeric buttons on the remote control. • [2nd audio language]: Select the second audio language (only for Blu-ray discs that support BonusView). • [2nd Subtitle Language]: Select the second subtitle language (only for Blu-ray discs that support BonusView). • [Titles]: Select a title. • [Chapters]: Select a chapter. • [Angle list]: Select a camera angle. • [Menus]: Display a disc menu. • [PIP selection]: Display a picture-in-picture window (only for Blu-ray discs that support BonusView). 1 2 3 • [Zoom]: Zoom into a video picture. Press to select a zoom factor. • [Repeat]: Repeat a chapter or title. • [Repeat A-B]: Mark two points within a chapter for repeat play, or turn off repeat mode. • [2D to 3D]: Convert instantly a 2D video to be viewed in 3D effect. • [Picture settings]: Select the most optimum picture setting (powered by CinemaPerfect HD). • [Audio sync]: Synchronize audio with video. Note •• Available video options depend on the video source. Picture options Access more options during slideshow. • [Rotate +90]: Rotate a picture 90 degrees clockwise. • [Rotate -90]: Rotate a picture 90 degrees counter-clockwise. • [Zoom]: Zoom into a picture. Press to select a zoom factor. • [Info]: Display picture information. • [Duration per slide]: Set a display interval for a slideshow. • [Slide animation]: Select a transition effect for a slideshow. • [Picture settings]: Select the most optimum picture setting (powered by CinemaPerfect HD). 1 2 3

• [2D to 3D]: Convert instantly a 2D picture to be viewed in 3D effect. Audio options Press repeatedly to cycle through the following options. • Repeat the current track. • Repeat all the tracks on the disc or folder. • Play audio tracks in a random loop. • Turn off a repeat mode. DivX videos You can play DivX videos from a disc, a USB storage device, or an online video store (see "Rent online videos). VOD code for DivX • Before you purchase DivX videos and play them on this player, register this player on www.divx.com using the DivX VOD code. • Display the DivX VOD code: press , and select [Setup] > [Advanced] > [DivX® VOD Code]. DivX subtitles • Press SUBTITLE to select a language. • If the subtitle is not displayed correctly, change the character set that supports the DivX subtitle. Select a character set: press , and select [Character set]. Character set Languages [Standard] English, Albanian, Danish, Dutch, Finnish, French, Gaelic, German, Italian, Kurdish (Latin), Norwegian, Portuguese, Spanish, Swedish, and Turkish [Central Europe] Albanian, Croat, Czech, Dutch, English, German, Hungarian, Irish, Polish, Romanian, Slovak, Slovene, and Serbian [Cyrillic] Bulgarian, Belorussian, English, Macedonian, Moldavian, Russian, Serbian, and Ukrainian [Greek] Greek [Baltic] Northern Europe Note •• To play DivX DRM protected files from a USB storage device, or an online video store, connect this player to a TV through HDMI. •• To use the subtitles, make sure that the subtitle file has the same name as the DivX video file name. For example, if the DivX video file is named “movie.avi", save the subtitle file as “movie.srt”, or “movie.sub”. •• This player can play subtitle files in the following formats: .srt, .sub, .txt, .ssa, and .smi. Synchronize audio with video You can adjust the audio delay time when video is out of sync with audio. 1 Make sure that this player is connected to your TV through HDMI. 2 During play, press . » » The options menu is displayed. 3 Select [Audio sync]. 4 Press to select a value until audio is in sync with video. Play a musical slideshow Play music and pictures simultaneously to create a musical slideshow. 1 From a disc or connected USB storage device, play a music file. 2 Press , and go to the picture folder.

USB, and press OK to start slideshow. 4 Press to stop slideshow. 5 Press again to stop music play. BonusView on Blu-ray View special content (such as commentaries) in a small screen window. This feature is only applicable to Blu-ray discs compatible with BonusView (also known as picture in picture). 1 During play, press . » » The options menu is displayed. 2 Select [PIP selection] > [PIP], and press OK. » » PIP options [1]/[2] depend on the video contents. » » The secondary video window is displayed. 3 Select [2nd audio language] or [2nd Subtitle Language], and press OK. BD-Live on Blu-ray Access exclusive online services, such as movie trailers, games, ringtones, and other bonus contents. This feature is only applicable to Blu-ray discs that are BD-Live enabled. 1 Prepare the Internet connection and set up a network (see "Set up a network"). 2 Connect a USB storage device or SD card to this player. • A USB storage device or SD card is used to store the downloaded BD-Live content. 3 Select a USB storage device or SD card to store: press , and select [Setup] > [Advanced] > [Local storage]. • To delete the BD-Live previously downloaded on the USB storage device or SD card for memory release, press , and select [Setup] > [Advanced] > [Clear memory]. 4 Play a disc that is BD-Live enabled. 5 On the disc menu, select the BD-Live icon, and press OK. » » BD-Live starts to load. The loading time depends on the disc and the Internet connection. 6 On the BD-Live interface, select an item to access. Note •• BD-Live services vary from discs and countries. •• When you use BD-Live, data on the disc and this player are accessed by the content provider •• Use a USB storage device or SD card with at least 1GB of free space to store the download. Play a Blu-ray 3D video What you need • A 3D compliant TV • This player is connected to the TV through HDMI • 3D glasses compatible with the TV 1 Make sure that 3D output is turned on: press , and select [Setup] > [Video] >[Watch 3D video] > [Auto]. 2 Play a Blu-ray 3D video. 3 Put on the 3D glasses for 3D effects. • To play 3D video in 2D, turn off Blu-ray 3D output (press , and select [Setup] > [Video] > [Watch 3D video] > [Off]).

effect You can convert 2D videos or pictures to be viewed in 3D effect. What you need • A 3D compliant TV • This player is connected to the TV through HDMI • 3D glasses compatible with the TV 1 Play 2D video or pictures on this player. 2 Press . » » The options menu is displayed. 3 Select [2D to 3D] > [On]. » » 2D video or pictures are converted to 3D effect. 4 Put on the 3D glasses for 3D effects. Set up a network Connect this player to a computer network and the Internet to access the services: • Browse PC (DLNA): play photos, music, and video files streamed from your computer. • Browse Smart TV: access online services, such as pictures, music and video stores. • Update software: update the software of this player via the Internet. • BD-Live: access online bonus features (applicable to Blu-ray discs that are BD- Live enabled). 1 Connect this player to a computer network and the Internet, through wired (Ethernet) or wireless connection. • For wired connection, connect a network cable (not supplied) to the LAN port on the back panel of this player. • This player has a built-in Wi-Fi for a wireless connection. 2 Perform the network installation. 1) Press . 2) Select [Setup], and press OK. 3) Select [Network] > [Network installation], and press OK. 4) Follow the instructions on the TV screen to complete the installation. Caution •• Before you connect to a network, familiarize yourself with the network router, media server software for DLNA, and networking principles. If necessary, read documentation accompanying network components. Philips is not responsible for lost, damaged, or corrupt data. PC (DLNA) PC (DLNA)

media files from this player. What you need • An iPhone (iOS 3.1.3 and above) or Android based device (Android 2.1 and above) • On your smartphone, download Philips MyRemote application • For iPhone, search for the application in App Store • For Android based device, search for the application in Android Market Before you start • Connect this player to a home network (see "Set up a network"). • Connect your smartphone to the same home network (see the user manual of the smartphone for details). • Turn on this player Control your player Use a smartphone to browse, control and play media files from this player. 1 Insert a data disc or USB storage device into this player. 2 On your smartphone, tap the MyRemote icon from the home screen. » » The name of this player is displayed on the smartphone. 3 Select this player from the smartphone screen. » » The smartphone used as a virtual remote control is enabled. 4 On the smartphone, tap the Media (Media) tab, and then select the disc or USB source. » » The folders in the data disc or USB storage device are displayed. 5 Open a folder, and select a file to play. • To access the remote control, return to the previous smartphone screen, and then tap the Remote (Remote) tab. Only the relevant control buttons are enabled. 6 Tap the control buttons on the smartphone to control play. • To access more control buttons, swipe the screen to the left or right. • To exit the application, press the home button on the smartphone. Browse PC through DLNA Through this player, you can stream and play video, music and photo from a computer on your TV. Before you start • On your PC, install a DLNA-compliant media server application (such as Windows Media Player 11 or higher) • On your PC, enable media sharing and file sharing (see the "Help" document in the media server application) 1 Connect this player and your PC in the same home network (see "Set up a network"). • For better video quality, use wired network connection whenever possible. 2 Press . » » The home menu is displayed on the TV screen. 3 Select [browse PC], and press OK. » » A content browser is displayed. 4 Select a file, and press OK to play. • Use the remote control to control play. Browse Smart TV You can access variety of Internet applications and specially adapted Internet websites.

responsibility for content provided by Smart TV service providers. 1 Connect this player to the Internet (see "Set up a network"). 2 Press . » » The home menu is displayed on the TV screen. 3 Select [Smart TV], and press OK. 4 Follow the onscreen instructions to confirm the onscreen message. 5 Use the remote control to navigate and select an Internet application. Button Action Navigate and select an a service or item. OK Confirm a selection. Return to a previous page, or delete input text. Access options related to a current activity. Alphanumeric buttons Input text (such as an email address, web URL and password). TOP MENU Return to the Smart TV home screen. To remove the passwords and cookies from this player, see the section: Change settings > Network (installation, Smart TV...). Rent online videos Rent videos from online stores through this player. What you need • A high-speed Internet connection to this player. • An HDMI connection between this player and the TV. • An SD memory card of type SDHC Class 6, with at least 8 GB memory. Note •• Use a blank SD card. Formatting a SD card erases any content on the SD card. •• This service is country dependent. 1 Connect this player to the Internet (see "Set up a network"). 2 Insert a blank SD card into the SD CARD connector located on the rear panel of this player. 3 Press . 4 Select [Smart TV]> Video stores. 5 Select a video store, and follow the onscreen instructions to rent and watch a video. » » The video is downloaded to the SD card. You can watch it now or at any time within the rental period. » » For the downloaded video on the SD card, you can watch it only on this player. 6 Use the remote control to play and control the video. Skype Use Skype to make video calls or voice calls with your friends over the Internet. What you need • A high-speed Internet connection to this player. • A dedicated Skype camera (not supplied): to purchase the camera, visit www.freetalk. me/philips. 1 Connect this player to the Internet (see “Set up a network”).

connector at the rear panel of this player. • If your connect more peripheral USB devices, connect a USB hub to this player to make multiple USB ports available. 3 Press . » » The home menu is displayed on the TV screen. 4 Select [Video call], and press OK. 5 Log in your Skype account. • If you do not have a Skype account, follow the onscreen instructions to create it. • To enter your Skype name and password, follow the onscreen instructions. 6 Use the remote control to select onscreen options (such as an audio or video call). Button Action Navigate and select an a service or item. OK Confirm a selection. Delete input text, or return to a previous page. Access options related to a current activity. Note •• No emergency calls with Skype. Skype is not a replacement for your telephone and cannot be used for emergency calling. •• For more information on Skype, visit www.skype.com. •• Use of a wireless network connection may cause degradation of image and audio quality. Use a USB keyboard or mouse For convenience of Internet usage, you can connect a USB keyboard and/or mouse to type text and navigate pages on the Internet. 1 Connect a USB keyboard or mouse to the USB connector at the rear panel of this player. • If you connect more peripheral USB devices, connect a USB hub to this player to make multiple USB ports available. • You also can connect a wireless USB keyboard or mouse (see the user manual of the wireless device for details). 2 Use the keyboard to type text, or the mouse to navigate web pages. • To change a language for the keyboard, press , and select [Setup] > [Preference] > [Keyboard layout]. Note •• If a USB hub is used with this player, do not overload the USB hub with many USB devices to avoid insufficient USB power. Use Philips EasyLink This player supports Philips EasyLink which uses the HDMI CEC (Consumer Electronics Control) protocol. You can use a single remote control to control EasyLink compliant devices that are connected through HDMI. Philips does not guarantee 100% interoperability with all HDMI CEC devices. 1 Connect the HDMI CEC compliant devices through HDMI, and turn on the HDMI CEC operations on the TV and other connected devices (see the user manual of the TV or other devices for details).

3 Select [Setup]> [EasyLink]. 4 Select [On] under the options: [EasyLink], [One Touch Play] and [One Touch Standby]. » » EasyLink function is turned on. One Touch Play When you play a disc on this player, the TV automatically switches to the correct video input source. One Touch Standby When a connected device (for example TV) is put to standby with its own remote control, this player is put to standby automatically. Stream media from an Android device With Philips SimplyShare, through this player you can stream media files from an Android based device on your TV. For details, visit www. philips.com/support

This section helps you change the settings of this player. Note •• You cannot change a menu option that is grayed out. •• To return to the previous menu, press . To exit the menu, press . Picture 1 Press . 2 Select [Setup] > [Video] to access the video setup options. • [TV display]: Select a picture display format to fit the TV screen. • [HDMI video]: Select an HDMI video resolution. • [HDMI Deep Color]: Display colors with more shades and hues when the video content is recorded in Deep Color and the TV supports this feature. • [Picture settings]: Select the most optimum picture setting (powered by CinemaPerfect HD). 1 2 3 • [User]: Select a personalized picture setting. This option is activated only when [User] under [Picture settings] is selected. • [Watch 3D video]: Set to 3D or 2D output when playing a Blu-ray 3D disc. The player must be connected to a 3D TV through HDMI. Note •• If you change a setting, make sure that the TV supports the new setting. •• For settings related to HDMI, the TV must be connected through HDMI. •• For the composite connection (via the VIDEO connector), select a video resolution of 480i/576i or 480p/576p under [HDMI video] to enable video output. Sound 1 Press . 2 Select [Setup] > [Audio] to access the audio setup options. • [Night mode]: Select quiet or full dynamic sound. Night mode decreases the volume of loud sound and increases the volume of soft sound (such as speech). • [Neo 6]: Enable or disable a surround sound effect which is converted from 2.0 channel audio. • [HDMI Audio]: Set an HDMI audio format when this player is connected through HDMI. • [Digital Audio]: Select an audio format for the sound output when this player is connected through a digital connector (COAXIAL or OPTICAL). • [PCM Downsampling]: Set the sampling rate for PCM audio output when this player is connected through a digital connector (COAXIAL or OPTICAL).

or 2 channel / 5.1 channel sound according to multichannel connection. • [Speaker setup]: Set the volume level and distance of each speaker to obtain the best possible surround sound. Note •• For settings related to HDMI, the TV must be connected through HDMI. •• Night mode is only available for Dolby encoded DVD and Blu-ray discs. Network (installation, Smart TV...) 1 Press . 2 Select [Setup] > [Network] to access the network setup options. • [Network installation]: Start a wired or wireless installation to make the network work. • [View network settings]: Display the current network status. • [View wireless settings]: Display the current Wi-Fi status. • [Clear Smart TV Memory]: Clear the history of Smart TV browser (such as cookies). • [Name your Product:]: Re-name this player for identification in a home network. Preference (languages, parental control...) 1 Press . 2 Select [Setup] > [Preference] to access the preference setup options. • [Menu language]: Select an onscreen display menu language. • [Keyboard layout]: Select a language for a connected keyboard. • [Audio]: Select an audio language for video. • [Subtitle]: Select a subtitle language for video. • [Disc menu]: Select a menu language for a video disc. • [Parental control]: Restrict access to discs that are encoded with ratings. Input "0000" to access the restriction options. To play all discs irrespective of the rating, select level "8". • [Screen saver]: Enable or disable screen saver mode. If enabled, the screen enters idle mode after 10 minutes of inactivity (for example, in pause or stop mode). • [Auto subtitle shift]: Enable or disable subtitle shift. If enabled, the subtitle position is changed automatically to fit the TV screen (this feature works with some Philips TVs only). • [Change password]: Set or change a password to play a restricted disc. Input "0000" if you do not have a password or if you have forgotten your password. • [Display panel]: Change the brightness of the display panel of the player. • [Auto standby]: Enable or disable auto standby. If enabled, the player switches to standby after 30 minutes of inactivity (for example, in pause or stop mode). • [Fast wake up]: Enable or disable the player to wake up faster from standby. If fast wakeup is turned off, less power is consumed during standby. • [VCD PBC]: Display or skip the content menu for VCD and SVCD.

language, audio or subtitle, you can select [Others] from the menu options and input 4-digit language code which can be found at the back of this user manual. •• If you select a language which is not available on a disc, this player uses the default language of the disc. Advanced options (clear memory...) 1 Press . 2 Select [Setup] > [Advanced] to access the advanced setup options. • [BD-Live security]: Restrict or allow access to BD-Live (only for non- commercial, user-created BD-Live discs). • [Downmix mode]: Control 2-channel stereo audio output. • [Software update]: Select to update software from a network or from USB storage device. • [Clear memory]: Delete the previous BD-Live download on the USB storage device or SD card. A "BUDA" folder is automatically created to store the BD- Live download. • [Local storage]: Select a USB storage device or SD card to store the downloaded BD-Live files. • [DivX® VOD Code]: Display the DivX® registration code or the deregistration code for this player. • [Version information]: Display the software version of this player. • [Restore default settings]: Reset this player to the default settings made at the factory, except for password and parental control level. Note •• You cannot restrict Internet access on commercial Blu-ray discs. •• Before you purchase DivX videos and play them on this player, register this player on www.divx.com with the DivX VOD code.

Before you update the software of this player, check the current software version: • Press , and then select [Setup] > [Advanced] > [Version information], and press OK. Update software via the Internet 1 Connect the player to the Internet (see "Set up a network"). 2 Press , and select [Setup]. 3 Select [Advanced] > [Software update]> [Network]. » » If an upgrade media is detected, you are prompted to start the update. 4 Follow the instructions on the TV screen to update the software. » » When the update is complete, this player automatically turns off and on again. Update software via USB 1 Check the latest software version on www. philips.com/support. • Search for your model and click on "Software and drivers". 2 Download the software into a USB storage device. a Unzip the download, and make sure that the unzipped folder is named "UPG_ALL". b Put the "UPG_ALL" folder in the root directory. 3 Connect the USB storage device to the (USB) connector on this player. 4 Press , and select [Setup]. 5 Select [Advanced] > [Software update]> [USB]. » » If an upgrade media is detected, you are prompted to start the update. 6 Follow the instructions on the TV screen to update the software. » » When the update is complete, this player automatically turns off and on again. Caution •• Do not turn off the power or remove the USB storage device when the software update is in progress because you might damage this player.

Region code This player can play discs with the following region codes. DVD Blu-ray Countries Europe, United Kingdom Playable media • BD-Video, BD 3D • DVD-Video, DVD+R/+RW, DVD-R/-RW, DVD+R/-R DL (Dual Layer) • VCD/SVCD • Audio CD, CD-R/CD-RW, MP3 media, WMA media, JPEG files • DivX (Ultra)/DivX Plus HD media, MKV media • USB storage device File container • Video: .avi, .divx, .mp4/m4v, .mkv, .asf/wmv, .mpg/mpeg, .m2ts • Audio: .aac/m4a, .mp3, .wma, .mka • Picture: .jpg, .gif, .png Video • Signal system: PAL / NTSC • Composite video output: 1 Vp-p (75 ohm) • HDMI output: 480i/576i, 480p/576p, 720p, 1080i, 1080p, 1080p/24Hz Audio • 2 Channel analog output • Audio Front L + R : 2 Vrms (> 1 kohm) • 7.1 Channel analog output • Audio Front L + R : 2 Vrms (> 1 kohm) B • Audio Surrond L + R : 2 Vrms (> 1 kohm) • Audio Center : 2 Vrms (> 1 kohm) • Audio Subwoofer : 1.15 Vrms (> 1 kohm) • Audio Rear L + R: 2 Vrms (> 1 kohm) • Digital output: 0.5 Vp-p (75 ohm) • Optical, Coaxial • HDMI output • Sampling frequency: • MP3: 32 kHz, 44.1 kHz, 48 kHz • WMA: 44.1 kHz, 48 kHz • Constant bit rate: • MP3: 112 kbps - 320 kpbs • WMA: 48 kpbs - 192 kpbs USB • Compatibility: Hi-Speed USB (2.0) • Class support: USB Mass Storage Class • File system: FAT16, FAT32 • USB port: 5V , 500mA (for each port) • Support HDD (a portable hard disc drive): an external power source may be needed. Main unit • Power supply rating: AC 220-240V~, 50 Hz • Power consumption: 20 W • Power consumption in standby mode (fast wakeup disabled): < 0.15 W • Dimensions (w x h x d): 435 x 42 x 230 (mm) • Net Weight: 1.51 kg Accessories supplied • Remote control and batteries • AC power cable • User manual • CD-ROM built in multi-lingual user manual (Continental Europe only) Laser Specification • Laser Type (Diode): AlGaInN (BD), AlGaInP (DVD/CD) • Wave length: 398 ~ 412nm (BD), 650 ~ 664nm (DVD), 784 ~ 796nm (CD) • Output power (Max ratings): 20mW (BD), 7mW (DVD), 7mW (CD)

player. To keep the warranty valid, never try to repair the player yourself. If you have problems using this player, check the following points before you request service. If you still have a problem, register your player and get support at www.philips.com/welcome. If you contact Philips, you will be asked for the model and serial number of this player. The model number and serial number are on the back of this player. Write the numbers here: Model No. _____________________________ Serial No. ______________________________ Main unit The buttons on this player do not work. • Disconnect this player from the power supply for a few minutes, and then reconnect. Picture No picture. • Make sure that the TV is switched to the correct source input for this player. • For the composite connection (via the VIDEO connector) to the TV, on this player select a video resolution of 480i/576i or 480p/576p to enable video output (press , and select [Setup] > [Video] > [HDMI video]) . No picture on HDMI connection. • Make sure that the HDMI cable is not faulty. If it is faulty, replace with a new HDMI cable. • On the remote control, press and then press “731” (numeric buttons) to recover picture display. Or wait for 10 seconds for auto recovery. • If this player is connected to an unauthorized display device with an HDMI cable, the audio and video signals may not be output. The disc does not play high-definition video. • Make sure that the disc contains high- definition video. • Make sure that the TV supports high- definition video. Sound No audio output from the TV. • Make sure that the audio cables are connected to the audio input of the TV. • Make sure that the TV is switched to the correct source input for this player. No audio output from the loudspeakers of the external audio device (home theater or amplifier). • Make sure that the audio cables are connected to the audio input of the audio device. • Switch the external audio device to the correct audio source input. No 7.1 (or 5.1) channel audio from the loudspeaker of the audio system. • According to multi-channel connection, select correct sound output: press , and select [Setup] > [Audio] > [Channels]. • Make sure that the disc contains 7.1 (or 5.1) channel audio. • Make sure that the audio device supports 7.1 (or 5.1) channel audio. • Make sure that the audio format is supported by the disc and the connected audio device (amplifier/receiver). • For play of video files with DTS multi- channel audio from USB or DLNA, only 2 channel audio can be heard from multi- channel connection.

• You may not hear any sound from the HDMI output if the connected device is non-HDCP compliant or only DVI- compatible. No secondary audio output for Picture-in- Picture feature. • When [Bitstream] under the [HDMI Audio] or [Digital Audio] menu is selected, interactive sound like secondary sound for Picture-in-Picture feature is muted. De- select [Bitstream]. Play Cannot play a disc. • Clean the disc. • Make sure that the disc is correctly loaded. • Make sure that this player supports the disc. See "Specifications". • Make sure that this player supports the region code of the DVD or BD. • For DVD±RW or DVD±R, make sure that the disc is finalized. Cannot play DivX video files. •• Make sure that the DivX video file is complete. •• Make sure that the video file name extension is correct. •• To play DivX DRM protected files from a USB storage device or a network, connect this player to a TV through HDMI. DivX subtitles do not display correctly. •• Make sure that the subtitle file has the same name as the DivX video file. •• Make sure that the subtitle file has an extension name supported by this player (.srt, .sub, .txt, .ssa, or .smi). Cannot read the contents of a connected USB storage. •• Make sure that the format of the USB storage device is compatible with this player. •• Make sure that the file system on the USB storage device is supported by this player. •• For a USB HDD (a portable hard disc drive), an external power source may be needed. 'No entry' or 'x' sign is displayed on the TV. •• The operation is not possible. EasyLink feature does not work. • Make sure that this player is connected to the Philips brand EasyLink TV, and the EasyLink option is turned on (see "Use your Blu-ray disc/ DVD player" > "Use Philips EasyLink"). Cannot access BD-Live features. • Make sure that this player is connected to the network (see "Use your Blu-ray disc/ DVD player" > "Set up a network"). • Make sure that the network installation is made (see "Use your Blu-ray disc/ DVD player" > "Set up a network"). • Make sure that the Blu-ray disc supports BD-Live features. • Clear memory storage (see "Change settings" > "Advanced options (BD-Live security, clear memory...)"). Cannot download video from an online video store. • Make sure that this player is connected to the network (see “Use your Blu-ray disc/ DVD player” > “Set up a network”). • Make sure that this player is connected to the TV through an HDMI cable. • Make sure that the SD card is formatted, has enough memory to download the video, and is of type SDHC Class 6. • Make sure that you have paid for the video, and it is within the rental period. Network Wireless network is not found or distorted. • Make sure that the network is correctly connected (see "Use your Blu-ray disc/ DVD player" > "Set up a network"). • Make sure that the network installation is made (see "Use your Blu-ray disc/ DVD player" > "Set up a network").

not disturbed by microwave ovens, DECT phones, or other neighboring Wi-Fi devices. • If the wireless network does not work properly, try a wired network installation (see "Use your Blu-ray disc/ DVD player" > "Set up a network"). Smart TV does not work. • Make sure that the network is correctly connected (see "Use your Blu-ray disc/ DVD player" > "Set up a network"). • Make sure that the network installation is made (see "Use your Blu-ray disc/ DVD player" > "Set up a network"). • Check the router connection (refer to the user manual for the router). Browse PC and Smart TV work slowly. • Look in your wireless router’s user manual for information on indoor range, transfer rate, and other factors of signal quality. • You need a high speed Internet connection for your router. 3D videos Cannot see 3D effects • Make sure that 3D output is turned on(see "Use your Blu-ray disc/ DVD player" > "Play a Blu-ray 3D video"). • Make sure that the disc title being played is Blu-ray 3D compliant. • Make sure that the TV is 3D and HDMI compliant, and the TV is set to 3D mode (refer to the TV's user manual). • Make sure that the 3D glasses are activated (refer to the TV’s user manual).

‘Blu-ray 3DTM’ and ‘Blu-ray 3DTM’ logo are the trademarks of Blu-ray Disc Association. HDMI, and HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC in the United States and other countries. DLNA® , the DLNA Logo and DLNA CERTIFIED® are trademarks, service marks, or certification marks of the Digital Living Network Alliance. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195; 7,272,567 & other U.S. and worldwide patents issued & pending. DTS-HD, the Symbol, & DTS-HD and the Symbol together are registered trademarks & DTS-HD Master Audio is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX videos. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on- Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration. DivX Certified® to play DivX® and DivX Plus® HD (H.264/MKV) video up to 1080p HD including premium content. DivX®, DivX Certified®, DivX Plus® HD and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license. BONUSVIEW™ ‘BD LIVETM’ and ‘BONUSVIEWTM’ are trademarks of Blu-ray Disc Association. ‘DVD Video’ is a trademark of DVD Format/ Logo Licensing Corporation. Java and all other Java trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States and/or other countries.

SGP-1209-CE-BDP7700/12 CE2012 .............................................................. ........................................................................................ (Report No. / Numéro du Rapport) (Year in which the CE mark is affixed / Année au cours de laquelle le marquage CE a été apposé) EC DECLARATION OF CONFORMITY (DECLARATION DE CONFORMITE CE) We / Nous, PHILIPS CONSUMER LIFESTYLE B.V. (Name / Nom de l’entreprise) TUSSENDIEPEN 4, 9206 AD DRACHTEN, THE NETHERLANDS (address / adresse) Declare under our responsibility that the electrical product(s): (Déclarons sous notre propre responsabilité que le(s) produit(s) électrique(s):) PHILIPS BDP7700/12 ....................................................................... ........................................................... (brand name, nom de la marque) (Type version or model, référence ou modèle) Blu-ray Disc / DVD Player .............................................................................................. (product description, description du produit) To which this declaration relates is in confirmity with the following harmonized standards: (Auquel cette déclaration se rapporte, est conforme aux normes harmonisées suivantes) (title, number and date of issue of the standard / titre, numéro et date de parution de la norme) EN60065:2002, A1:2006, A11:2008, A2:2010 EN55013:2001, A1:2003, A2:2006 EN55020:2007 EN55022:2006, A1:2007 EN55024:1998, A1:2001, A2:2003 EN61000-3-2:2006, A1:2009, A2:2009 EN61000-3-3:2008 EN62311:2008 IEC62087:2008 IEC62301:2005 EN300 328-1 V1.7.1:2006 EN301 489-1 V1.8.1:2008 EN301 489-17 V2.1.1:2009 Following the provisions of : (Conformément aux exigences essentielles et autres dispositions pertinentes de:) 2006/95/EC (Low Voltage Directive / Directive Basse Tension 2006/95/CE) 2004/108/EC (EMC Directive / Directive EMC 2004/108/CE) 1999/5/EC (R&TTE Directive / Directive R&TTE 1999/5/CE) 2009/125/EC (ErP Directive / Directive ErP 2009/125/CE) EC1275/2008 (Regulation for ErP Directive / Reglement pour les ErP Directive) And are produced under a quality scheme at least in conformity with ISO 9001 or CENELEC Permanent Documents (Et sont fabriqués conformément à une qualité au moins conforme à la norme ISO 9001 ou aux Documents Permanents CENELEC) Safety : SG ITS-4689 EMC : NEI-EMC-1-1111C215; NEI-EMC-2-1111C215 EMF : NEI-EMF-1-1111C215 RTTE : NEI-ETSP-1-1111C215; NEI-ETSE-1-1111C215 Remarks: (Remarques:) Drachten, Netherlands, February 29, 2012 A. Speelman, CL Compliance Manager ........................................................... ..................................................................................................... (place,date / lieu, date) (signature, name and function / signature, nom et fonction)

9072 Chuang; Zhuang 9065 Church Slavic; Slavonic 6785 Chuvash 6786 Corsican 6779 Česky 6783 Dansk 6865 Deutsch 6869 Dzongkha 6890 English 6978 Esperanto 6979 Estonian 6984 Euskara 6985 6976 Faroese 7079 Français 7082 Frysk 7089 Fijian 7074 Gaelic; Scottish Gaelic 7168 Gallegan 7176 Georgian 7565 Gikuyu; Kikuyu 7573 Guarani 7178 Gujarati 7185 Hausa 7265 Herero 7290 Hindi 7273 Hiri Motu 7279 Hrwatski 6779 Ido 7379 Interlingua (International)7365 Interlingue 7365 Inuktitut 7385 Inupiaq 7375 Irish 7165 Íslenska 7383 Italiano 7384 Ivrit 7269 Japanese 7465 Javanese 7486 Kalaallisut 7576 Kannada 7578 Kashmiri 7583 Kazakh 7575 Kernewek 7587 Khmer 7577 Kinyarwanda 8287 Kirghiz 7589 Komi 7586 Korean 7579 Kuanyama; Kwanyama 7574 Kurdish 7585 Lao 7679 Latina 7665 Latvian 7686 Letzeburgesch; 7666 Limburgan; Limburger 7673 Lingala 7678 Lithuanian 7684 Luxembourgish; 7666 Macedonian 7775 Malagasy 7771 Magyar 7285 Malayalam 7776 Maltese 7784 Manx 7186 Maori 7773 Marathi 7782 Marshallese 7772 Moldavian 7779 Mongolian 7778 Nauru 7865 Navaho; Navajo 7886 Ndebele, North 7868 Ndebele, South 7882 Ndonga 7871 Nederlands 7876 Nepali 7869 Norsk 7879 Northern Sami 8369 North Ndebele 7868 Norwegian Nynorsk; 7878 Occitan; Provencal 7967 Old Bulgarian; Old Slavonic 6785 Oriya 7982 Oromo 7977 Ossetian; Ossetic 7983 Pali 8073 Panjabi 8065 Persian 7065 Polski 8076 Português 8084 Pushto 8083 Russian 8285 Quechua 8185 Raeto-Romance 8277 Romanian 8279 Rundi 8278 Samoan 8377 Sango 8371 Sanskrit 8365 Sardinian 8367 Serbian 8382 Shona 8378 Shqip 8381 Sindhi 8368 Sinhalese 8373 Slovensky 8373 Slovenian 8376 Somali 8379 Sotho; Southern 8384 South Ndebele 7882 Sundanese 8385 Suomi 7073 Swahili 8387 Swati 8383 Svenska 8386 Tagalog 8476 Tahitian 8489 Tajik 8471 Tamil 8465 Tatar 8484 Telugu 8469 Thai 8472 Tibetan 6679 Tigrinya 8473 Tonga (Tonga Islands) 8479 Tsonga 8483 Tswana 8478 Türkçe 8482 Turkmen 8475 Twi 8487 Uighur 8571 Ukrainian 8575 Urdu 8582 Uzbek 8590 Vietnamese 8673 Volapuk 8679 Walloon 8765 Welsh 6789 Wolof 8779 Xhosa 8872 Yiddish 8973 Yoruba 8979 Zulu 9085 Ё᭛ Language Code

© 2012 Koninklijke Philips Electronics N.V. All rights reserved. BDP7700_12_UM_V2.0