Sony STR-DG520 Operating Instructions Manual

to this receiver can be displayed on a TV screen. It is not necessary to connect all the cords. Connect audio and video cords according to the jacks of your components. Before connecting cords, make sure to disconnect the AC power cord (mains lead). Note Be sure to turn on the receiver when the video and audio signals of a playback component are being output to a TV via the receiver. Unless the power is turned on, neither video nor audio signals will be transmitted. Tips • You can watch the selected input image when you connect ...

Types of A.F.D. mode If you connect a sub woofer This receiver will generate a low frequency signal for output to the sub woofer when there is no LFE signal, which is a low-pass sound effect output from a sub woofer to a 2 channel signal. Note This function does not work when – ANALOG DIRECT is selected. – signals with a sampling frequency of more than 48 kHz is input. A.F.D. mode [Display] Multi channel audio after decoding Effect A.F.D. AUTO [A.F.D. AUTO] (Detecting automatically) Presents the sound as it was recorded/encoded without adding any surround effec ...

OPTICAL IN jacks Connects to a DVD player, etc. The COAXIAL jack provides a better sound quality (page 17, 20, 22). COAXIAL IN jack HDMI IN/ OUT jacks* Connects to a DVD player or a Blu-ray d ...

RM-AAU020 Remote Commander. Observe the correct polarity when installing batteries. Notes • Do not leave the remote in an extremely hot or humid place. • Do not use a new battery with old ones. • Do not mix manganese batteries and other kinds of batteries. • Do not expose the remote sensor to direct sunlight or lighting apparatuses. Doing so may cause a malfunction. • If you do not intend to use the remote for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosion. • When you replace ...