Philips CID3682/93 Operation & User’s Manual

5 Overview of the main unit 6 2 Get started 7 Install the car audio 7 Turn on 9 Set date 10 Set clock mode 10 3 Use map 11 Upgrade the map 11 4 Play 12 Load discs 12 Connect USB device 12 Insert SD/MMC card 12 Play/Pause 13 Search for a folder 13 Search within a title/folder 13 Repeat 14 Repeat a section 14 Random play 15 Select audio language 15 Select audio mode 15 Select subtitle language 15 Rotate pictures 15 Zoom 15 Select slide show duration 16 5 Play with Bluetooth device 16 Pair the Bluetooth-enabled devices 16 Make a call 17 Receive call 17 Listen to music from Bluetooth device 18 Adjust Bluetooth settings 18 6 Adjust sound 19 Adjust volume 19 Mute 19 Select preset equalizer 19 Set Dynamic Bass Boost (DBB) 19 7 Adjust settings 20 Display system setup menu 20 Adjust general settings 20 Adjust sound settings 21 Adjust video settings 21 Adjust Bluetooth settings 22 Adjust language settings 22 Adjust volume settings 23 Adjust DVD rating 23 8 Others 24 Listen to other devices 24 Reset 24 Replace fuse 24 9 Product information 25 10 Troubleshooting 26 About Bluetooth device 27 11 Glossary 28

copy-protected material, including computer programs, files, broadcasts and sound recordings, may be an infringement of copyrights and constitute a criminal offence. This equipment should not be used for such purposes. “DivX, DivX” Certified, and associated logos are trademarks of DivX, Inc. and are used under license. Offical DivX® Certified product. Plays all versions of DivX® video (including DivX® 6) with standard playback of DivX® media files. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Philips is under license. Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Other trademarks and trade names are those of their respective owners. This apparatus includes this label: 1 Important Safety Read and understand all instructions • before you use the apparatus. If damage is caused by failure to follow instructions, the warranty does not apply. Use of controls or adjustments or • performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. This unit is designed for negative ground • (earth) 12 V DC operation only. To reduce the risk of traffic accident, do • no watch video during driving. To ensure safe driving, adjust the volume • to a safe and comfortable level. Improper fuses can cause damage or • fire. When you need to change the fuse, consult a professional. Use only the supplied mounting hardware • for a safe and secure installation. To avoid short circuit, do not expose the • apparatus, remote control or remote control batteries to rain or water. Never insert objects into the ventilation • slots or other openings on the apparatus. Never place any objects other than discs • into the disc tray/slot. Visible and invisible laser radiation when • open. Avoid exposure to beam. Risk of damage to the screen! Never • touch, push, rub or strike the screen with any object. Never use solvents such as benzene, • thinner, cleaners available commercially, or anti-static sprays intended for discs. Clean the apparatus with soft, damp • cloth. Never use substances such as alcohol, chemicals or household cleaners on the apparatus. EN

Check and identify the contents of your package: a Main unit b Screen c AV out cable d Power cable e AV in cable f Bluetooth microphone cable g 12 pin TFT cable h 14 pin CAN cable a b c d e g f h j i k Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.) Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment. Any changes or modifications made to this device that are not expressly approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment. 2008 © Koninklijke Philips Electronics N.V. All rights reserved. Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Introduction With the car entertainment system, you can Quickly found routine through the • navigation system And you can also enjoy: Audio/video/JPEG pictures from • DVD, VCD or CD • USB devices • SD/SDHC/MMC cards • External devices • Audio from Bluetooth-enabled devices • Besides, you can make/receive phone calls with Bluetooth-enabled devices. English EN

External equipment audio/video in • socket. i SD/SDHC/MMC card slot j Answer phone. • Terminate phone call. • k HOST Display host car audio menu (e.g. air • conditioner settings). i GPS antenna j Screen cleaning cloth k Printing material (includes user manual, GPS manual, quick start guide, warranty etc.) Overview of the main unit a /SOURCE Turn the unit on or off. • Select source. • b MAP Open the cover and insert/remove • the GPS map card. c Disc slot d Eject disc. • e RESET Reset the unit when it hangs up. • f NAVI Enter the GPS navigation system or • exit. EN e f a b c d j k i h g

Caution Use of controls or adjustments or performance • of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. Install the car audio These instructions are for a typical installation. However, if your car has different requirements, make the corresponding adjustment. If you have any questions regarding installation kits, consult your Philips car audio dealer. Caution This unit is designed for negative ground • (earth) 12 V DC operation only. Always install this unit in the car dashboard. • Other locations can be dangerous as the rear of the unit heats up during use. To avoid short-circuit: before you connect, • ensure that the ignition is off. Ensure that you connect the yellow and red • power supply leads after all other leads are connected. Ensure that all loose leads are insulated with • electrical tape. Ensure that the leads do not get caught under • screws orin parts that will move (e.g. seat rail). Ensure that all ground (earth) leads are run to • a common ground (earth) point. Use only the supplied mounting hardware for a • safe and secure installation. Improper fuses can cause damage or fire. • When you need to change the fuse, consult a professional. Note on the power supply lead (yellow) When you connect other devices to this • system, ensure that the rating of the car circuit is higher than the total fuse value of all the connected devices. Overview of the steering wheel 1 MODE Toggle between CID3682 and the • host car audio (long press). Selelct source for CID3682/host car • audio. 2 VOL Adjust volume. • 3 CH +/- Select track. • Select preset radio stations. • Answer an incoming call. • Terminate a phone call (long press). • MODE VOL CH + -- MODE VOL CH + -- a b c English EN

Never connect speaker wires to the • metal body or chassis of the car. Never connect speaker wires with stripes • to one another. Connect wires Caution Ensure that all loose leads are insulated with • electrical tape. 1 Check the car’s wiring carefully, then do the other connections: EN To host car audio To host car audio To host car audio To host car audio To host car audio Screen To CAN box To CAN box To CMMB box MINI 8PIN Main unit REAR R OUT REAR L OUT CAMERA CVBS EXTERNAL MIC REAR VIDEO OUT1 REAR VIDEO OUT2 AUX IN VIDEO REAR TS REAR R IN REAR L IN Red White Yellow Yellow Yellow Yellow Red White Black

to the car with four screws. 4 Attach the trim plate. 5 Reconnect the nagative terminal of the car battery. Turn on Caution Risk of road accidents! Never watch video or • adjust settings while you drive. 1 Press and hold SOURCE to turn on the unit. The available OSD (On-Screen » Display) languages are displayed. 2 Touch a language to select. The OSD language is changed to the » selected language immediately. To turn off the unit, press and hold • SOURCE. Connect GPS antenna To receive signal from satellites, connect the supplied GPS antenna to your car and the system. 1 Connect the supplied GPS antenna to the system first. 2 Stick the other end of the GPS antenna to a surface for better signal reception. Mount in the dashboard Note Check wire connection before you mount the • unit into a car. 1 Take off the trim plate of the car. 2 Fix the screen to the car with 2 screws. English EN

1 Turn on CID3682 and the host car audio. 2 Press MENU on the host car audio. 3 Turn the SEL knob clockwise to select Clock Adjust, and then press the knob. 4 Turn the SEL knob to select [12Hr] or [24Hr], and then press the knob. 5 Turn the SEL knob to select 12H or 24H clock mode, and then press the knob. 6 Press MENU on the host car audio again to exit. Set date 1 Touch the upper left corner to display main menu. 2 Touch in the middle right side of the screen. The second main menu is displayed. » 3 Touch [Settings]. 4 Touch [Time]. The date setup menu is displayed. » 5 Touch on the displayed date information. 6 Touch or to set year, month and day. Tip When date is set, touch • first and then touch to return to main menu. To set time, refer to the user manual of the • host car audio. EN

1 Turn off the car audio system. 2 Open the map door. 3 Press on the map card until you hear a click sound. 4 Take out the card and bring it to the authorized service center for upgrade. 5 Insert the upgraded map card back into the map card slot. 6 Turn on the car audio. The map upgrades in a few minutes. » 3 Use map Note You may need to upgrade the map before • using it (see “Upgrade the map” section) 1 Touch the upper left corner to display home menu. 2 Touch [Navigation]. The navigation menu is displayed in a » few seconds. 3 Refer to the map manual (in Chinese) to operate the navigation tool. Tip You can press • NAVI to enter/exit the navigation system. English EN

1 Press SOURCE to switch to another source. 2 Remove the USB device. Insert SD/MMC card Note Ensure that the device contains playable content. • The unit supports SDHC card. • 1 Open the SD/MMC card cover. 2 Insert the SD/MMC card into the SD/MMC card slot. Play starts automatically. » 4 Play Load discs You can play video, audio or images stored on the following discs: DVD video, DVD-R, DVD-RW • VCD • Audio CD, CD-R, CD-RW • Note Ensure that the disc contains playable content. • 1 Insert the disc into the disc slot with label side facing up. Play starts automatically. » To remove the disc, press the » button. When the disc is ejected, the unit » switches to the previous source, if connected. Connect USB device Note Ensure that the device contains playable content. • 1 Open the USB door. 2 Insert your USB device to the USB socket. Play starts automatically. » EN

select a file. 4 Touch to start play. For audio files 1 Touch to return to playlist menu. 2 Touch to display all available audio folders. 3 Touch a folder, then touch or to select a file. 4 Touch to start play. For picture files 1 Touch to return to playlist menu. 2 Touch to display all available picture folders. 3 Touch a folder, then touch or to select a picture. 4 Touch to view the picture. Search within a title/folder Search by step 1 Touch anywhere except for the upper left corner to display menu on the screen, if necessary. 2 Touch or to skip to the previous or next chapter/track. Direct search 1 Touch anywhere except for the upper left corner to display menu on the screen, if necessary. 2 Touch . The search screen is displayed. » Remove the SD/MMC card 1 Press SOURCE to switch to another source. 2 Press the card until you hear a click sound. The card is now disengaged. » 3 Remove the SD or MMC card. Play/Pause Once a disc, USB or SD/MMC card is inserted, play starts automatically. For DVD movie, if a menu appears, touch • “play” to start play. 1 Touch anywhere except for the upper left corner to display menu on the screen, if necessary. 2 To pause, touch . To resume play, touch • again. Search for a folder For video files 1 Touch to return to playlist menu. 2 Touch to display all available video file folders. English EN

1 Touch anywhere except for the upper left corner to display menu on the screen, if necessary. 2 Touch to select: • [Repeat]: play the current track repeatedly. • [Repeat off]: cancel repeat play. For MP3/WMA files: 1 Touch anywhere except for the upper left corner to display menu on the screen, if necessary. 2 Touch to select: • [Repeat]: play the current track repeatedly. • [Repeat folder]: play all the tracks in the current folder repeatedly. • [Repeat off]: cancel repeat play. Repeat a section You can repeat a specific section of video file (repeat A-B). 1 During play, touch anywhere except for the upper left corner to display menu on the screen, if necessary. 2 Touch to display the 2nd menu, if necessary. 3 Touch repeatedly to mark: • [Repeat A-]: the start of the section to repeat. • [Repeat A-B]: the end of the section to repeat. The selected section plays repeatedly. • 4 To exit A-B repeat mode, touch repeatedly until [Repeat A-B off] is displayed. For video files, touch » first, then touch . 3 Touch the numbers to enter chapter/file number, then touch . To clear the previous input, touch • . To clear all input, touch • . Repeat During play, you can select different repeat play modes. For DVD/VCD movie disc: 1 Touch anywhere except for the upper left corner to display menu on the screen, if necessary. 2 Touch to display the 2nd menu. 3 Touch to select: • [Repeat chapter]: play the current chapter repeatedly. • [Repeat title]: play all chapters in the title repeatedly. • [Repeat off]: cancel repeat play. EN

3 Touch repeatedly to select a language. The selected language is displayed. » Rotate pictures 1 When you view pictures, touch anywhere except for the upper left corner to display menu on the screen, if necessary. 2 Touch repeatedly to rotate the picture. Zoom You can zoom in pictures for a close view. 1 During view pictures, touch anywhere except for the upper left corner to display menu on the screen, if necessary. 2 Touch repeatedly to zoom in the picture. 3 Touch , , or to pan through the enlarged picture. Random play You can play audio tracks/files in random order. 1 During play, touch repeatedly to turn random play on or off. • is highlighted : start random play. • turns gray: cancel random play. Select audio language For video discs that contain two or more audio channels. 1 During play, touch anywhere except for the upper left corner to display menu on the screen, if necessary. 2 Touch to display the 2nd menu. 3 Touch repeatedly. The audio channel information is » displayed on the upper line of the screen. Select audio mode When you play VCDs, you can select an audio mode (R/L/Stereo). 1 During play, touch anywhere except for the upper left corner to display menu on the screen. 2 Touch repeatedly until the audio mode is selected. Select subtitle language For DVD or DivX discs that contain two or more subtitle languages. 1 During play, touch anywhere except for the upper left corner to display menu on the screen, if necessary. English EN

Bluetooth device You can make or receive phone calls with Bluetooth-enabled phones through the unit. You can also listen to music from a Bluetooth- enabled device. Pair the Bluetooth-enabled devices To connect your Bluetooth device to the unit, you need to pair the device to the unit. Pairing needs only to be done once. You can pair up to eight devices. Note The operational range between this unit and a • Bluetooth device is approximately 10 meters (30 feet). Before you connect a Bluetooth device to this • unit, familiarize yourself with the Bluetooth capabilities of the device. Compatibility with all Bluetooth devices is not • guaranteed. Any obstacle between this unit and a Bluetooth • device can reduce the operational range. Keep this unit away from any other electronic • device that may cause interference. 1 Turn on the Bluetooth function on the device. 2 Search for Bluetooth device with the device. 3 Select “CID3682” in the pairing list. 4 Enter default password “0000”. if pairing succeeds. phone call record is » displayed. Select slide show duration 1 Touch anywhere except for the upper left corner to display menu on the screen, if necessary. 2 Touch repeatedly to select: • Fast: 3 seconds • Normal: 5 seconds • Slow: 8 seconds EN

number from the following list: • [Missed calls] • [Received calls] • [Dialed calls] • [Phone book] • [Sim phone book] • [Local phone book] Or touch to dial number directly, then touch to dial. Receive call By default, all incoming calls are received automatically. 1 If there is incoming call, [Incoming call...] flashes on the screen. Speak into the Bluetooth microphone. 2 When conversation ends, touch (red) to terminate the call. Tip You can select to receive calls manually by set • [Auto answer] to [Off] status. Disconnect Bluetooth devices 1 To disconnect one device, touch (red). » (green) is displayed. Tip The device will also be disconnected when the • device is moved beyond the operational range. If you want to reconnect the device to the • unit, place it within the operational range. If you do not want to reconnect the device • to the unit automatically, touch > [Auto connect], then select [Off]. For details, see the “Adjust Bluetooth settings” section. Make a call 1 Pair the phone with the unit. 2 Touch the upper left corner to display the home menu. 3 Touch [Bluetooth]. The Bluetooth menu is displayed. » 4 Touch or to select the paired phone, then touch . English EN

You can change below Bluetooth settings: • [Bluetooth]: to turn on or off “Bluetooth” function • [Auto connect]: to turn on or off “Auto connect” function • [Auto answer]: to turn on or off “Auto answer” function • [Pairing code]: to set paring code • [Phone Book Sync]: to synchronize phone book 1 In Bluetooth menu, touch . The option menu is displayed. » 2 Touch on the selected option to change the setting. Tip You can also adjust Bluetooth settings in the • “Settings” menu. Switch phone call to the mobile If you do not want your passenger to hear your incoming call, you can switch the call to the mobile. 1 During talking, touch . The voice is transferred from the unit’s » loudspeaker to the mobile phone. Listen to music from Bluetooth device If the connected Bluetooth device supports Advanced Audio Distribution Profile (A2DP), you can listen to the music stored on the device through the unit. If the device also supports Audio Video Remote Control Profile (AVRCP) profile, you can use the control on the unit or its remote control to play music stored on the device. 1 Pair the phone with the unit. 2 Touch the upper left corner to return to home menu. 3 Touch [Bluetooth]. The Bluetooth menu is displayed. » 4 Start play music via device. If your device support AVRCP. 1 Touch . 2 Touch to start play. EN

» 3 Touch or to select an EQ. 4 Touch or to adjust below settings: • [Bass] bass range: -14 to +14. • [Mid] middle range: -14 to +14. • [Treb] treble range: -14 to +14. • [LPH] low pass filter range: 60, 80, 100, 200. • [MPF] middle pass filter range: 500, 1K, 1.5K, 2.5K. • [HPF] high pass filter range: 10K, 12.5K, 15K, 17.5K. 5 Touch to restore the above settings into default settings. 6 Press to exit. Set Dynamic Bass Boost (DBB) 1 Touch to toggle between the settings. • [DBB] on: The icon is illuminated. • [DBB] off (default): The icon is gray. 6 Adjust sound Adjust volume To adjust volume, you can: Press the VOL +/- button on the steering • wheel. Rotate the volume knob on the host car • audio. Mute 1 Touch anywhere except for the upper left corner to display menu on the screen, if necessary 2 Touch . The sound is cut off. » To resume sound, touch » again. Select preset equalizer You can select preset equalizer: • [User] • [Techno] • [Rock] • [Classic] • [Jazz] • [Optimal] • [Flat] • [Pop] 1 Touch anywhere except for the upper left corner to display menu on the screen, if necessary. English EN

3 Touch on the option to display/select an option. General settings Options Description [Blackout] [off] Never turn on the screen saver. [10s] Turn on the screen saver automatically 10 seconds after last operation. [20s] Turn on the screen saver automatically 20 seconds after last operation. [Dimmer mode] [Night ]/ [Dark]/ [Normal]/ [Bright] Toggle between different dimmer modes. [Key color] [White] Button backlight turns white. [Blue] Button backlight turns blue. [Beep] [On] Turn on the beep sound. Each time you press a button, the unit beeps. [Off] Turn off the beep sound. [WallPaper] [Blue] / [Black]/ [Red]/ [F1] Change the background color/ image [Calibration] Calibrate the touch screen. 4 Press to exit. 7 Adjust settings Display system setup menu 1 Touch the upper left corner to display main menu. 2 Touch in the middle right side of the screen. The second main menu is displayed. » 3 Touch [Settings]. The settings menu is displayed. » Tip When the setup adjustment is completed, • touch first and then touch to return to main menu. Adjust general settings 1 Touch [General], if necessary. EN

Video settings Options Description [Aspect ratio] [Full] For widescreen display. [Normal] For normal display. [Video input] [Auto] The correct format is set automatically. Select this option if you are not sure which format should be selected. [NTSC] Used in the United States, Canada, Japan, Mexico, the Philippines, South Korea, Taiwan, and some other countries. [PAL] Used in China, India, Singapore, the western European countries (except France), Australia, and some other countries. [Secam] Used in France, Russia and other countries. [Parking] [On] Disable video view during drive. [Off] Enable video view during drive. [DivX registration code] View code for DivX registration. 3 Press to exit. Adjust sound settings 1 Touch [Sound]. 2 Touch an option repeatedly to select: Sound settings Options Description [DBB] [On] The Dynamic Bass Boost (DBB) function is on. [Off] The DBB function is off. [DRC] [On] Makes loud sound level softer and soft sound level louder so that you can watch the DVD movies at a low volume, without disturbing others. [Off] The DRC function is off. 3 Press to exit. Adjust video settings 1 Touch [Video]. English EN

1 Touch [Language]. 2 Touch an option repeatedly to select: Language settings Options Description [OSD] [English] Select on-screen- display language. [ࡩ฼ᇓ໗] [ᐥᦥɻʼ] [DVD audio] [English] Select DVD audio language. Options available are depends on DVD disc. [ࡩ฼ᇓ໗] [ᐥᦥɻʼ] [DVD subtitle] [English] Select DVD subtitle language. Options available are depends on DVD disc. [ࡩ฼ᇓ໗] [ᐥᦥɻʼ] [Off] Turn off subtitle language display. [Disc menu] [English] Select DVD menu language. Options available are depends on DVD disc. [ࡩ฼ᇓ໗] [ᐥᦥɻʼ] 3 Press to exit. Adjust Bluetooth settings 1 Touch [Bluetooth]. 2 Touch an option repeatedly to select: Bluetooth settings Options Description [Bluetooth] [On] Turn on the Bluetooth function. [Off] Turn off the Bluetooth function. [Auto connect] [On] If the pre-paired device is within the effective range, the unit re-connects to pre-paired device automatically. [Off] Need to re-connect manually. [Auto answer] [On] Answer paired phone call automatically. [Off] Answer phone call manually. [Pairing code] View code for pairing the unit with other Bluetooth devices. 3 Press to exit. EN

DVD rating Options Description [Set password] Set password to restrict the play of discs. The default password is 0000. [Rating level] [Kid safe] Acceptable for children. [G] Acceptable for general viewers. [PG] Parental guidance suggested. [PG-13] Unsuitable for children under age 13. [PG-R] Recommend parents to restrict children under 17 to view. [R] Restricted. Recommend parent to guide children under 17 to view. [NC-17] Unsuitable for children under age 17. [Adult] Acceptable for adults only. [Load factory] Restore to default settings. 3 Press to exit. Adjust volume settings You can set different volume for different modes. 1 Touch [Volume]. The volume setting sub-menu is » displayed. 2 Touch on a source. • [DVD] • [USB] • [SDHC] • [Bluetooth] • [AV-IN1] • [AV-IN2] • [Navigation] 3 Touch or to assign value: 0 to 12. When switches to the source, the » volume increases automatically. 4 Press to exit. Adjust DVD rating 1 Touch [DVD rating]. English EN

1 Press RESET with a ball-point pen or similar tool. Tip When the unit is reset, all the settings remain • unchanged. Replace fuse If there is no power, the fuse may be damaged and need to be replaced. 1 Take out the unit from dashboard. 2 Check the electric connection. 3 Buy a fuse that matches the voltage of the damaged fuse (5A) 4 Replace the fuse. If the fuse gets damaged immediately after it has been replaced, there may be an internal malfunction. In such case, consult your Philips dealer. 8 Others Listen to other devices You can connect an external audio/video device to the unit. 1 Connect the car audio to the device with the supplied AV cable. 2 Touch the upper left corner to display the main menu. 3 Touch [AV-IN1]. 4 Operated the connected the device (see the instructions manual of the device). Tip If you connected the system to other audio • device through the REAR OUT L/R connector (see “Connect wires” section), touch [AV-IN2] to listen to that device. AV IN EN

Maximum communication range Line of sight approx. 8m Frequency band 2.4 GHz band (2.4000 GHz - 2.4835 GHz) Compatible Bluetooth profiles Hands-Free Profile (HFP) Handset Profile (HSP) Advanced Audio Distribution Profile (A2DP) Audio Video Remote Control Profile (AVRCP) Supported codecs Receive Transmit SBC (Sub Band Codec) SBC (Sub Band Codec) Compatible USB devices: USB flash memory (USB 2.0 or USB1.1) • USB flash players (USB 2.0 or USB1.1) • memory cards (SD / MMC / SDHC) • Supported formats: USB or memory file format: FAT16, • FAT32 MP3 bit rate (data rate): 32-320 Kbps and • variable bit rate WMA v9 or earlier • Directory nesting up to a maximum of • 8 levels Number of albums/ folders: maximum 99 • Number of tracks/titles: maximum 999 • ID3 tag V2.0 to V2.4 • File name in Unicode UTF8 (maximum • length: 128 bytes) 9 Product information Note Product information is subject to change • without prior notice. General Power supply 12 V DC (11 V - 16 V), negative ground Fuse 5 A Pre-Amp output voltage 2.0 V ( CD play mode; 1 kHz, 0 dB, 10 k load) Aux-in level 500 mV Dimensions (W x H x D) - Main unit - Screen 201 x 240 x 191 mm 281 x 140 x 105 mm Weight - Main unit - Screen 2.1 kg 0.7 kg Disc player System DVD / CD audio / MP3 system Frequency response 20 Hz - 20k Hz Signal/noise ratio >75dB Total harmonic distortion Less than 1% Channel separation >55dB Video signal format NTSC only Video output 1 +/- 0.2V LCD Screen size 7 inches (16:9) Display resolution 800 x 480 dots Contrast ratio 300 Brightness 350 cd/m2 English EN

• To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www.philips. com/welcome). When you contact Philips, ensure that the apparatus is nearby and the model number and serial number are available. No power Car engine has not been started. Start • the car engine. Connections is incorrect. • Fuse has been damaged. Replace fuse. • No sound Volume is too low. Adjust volume. • Speaker connections is incorrect. • Disc does not play Disc is upside down. Ensure the printed • side is upwards. Disc is dirty. Clean the disc with a • clean, soft, lint-free cloth. Wipe the disc outwards from the center. Disc is defective. Try another disc. • incompatible disc is used. Try another disc. • Disc rating exceeds the restrict setting. • Change the rating settings to lower one. Disc region code is not compatible with • the unit. Use disc with proper region code. No image Parking brake wire connection is • incorrect. Check the parking wiring. Image flashes or distorted Video DVD settings do not match with • the DVD. Adjust video DVD settings. Video connection is improper. Check the • connections. Unsupported formats: Empty albums: an empty album is an • album that does not contain MP3/WMA files, and is not be shown in the display. Unsupported file formats are skipped. For • example, Word documents (.doc) or MP3 files with extension .dlf are ignored and not played. AAC, WAV, PCM audio files • DRM protected WMA files (.wav, .m4a, • .m4p, .mp4, .aac) WMA files in Lossless format • Supported MP3 disc format: ISO9660, Joliet • Maximum title number: 512 (depending • on file name length) Maximum album number: 255 • Supported sampling frequencies: 32 kHz, • 44.1kHz, 48 kHz Supported Bit-rates: 32-320 Kbps and • variable bit rate Supported video formats: DVD • Divx Home theater • Xvid • Note To ensure a better playback, it is recommended • that: - the image size is not larger than 640 X 480 pixels. - the frame rate is 20 fps. - the data rate is not higher than 500 kbps. EN

disconnects constantly. The Bluetooth reception is poor. Move • the mobile phone closer to the system or remove any obstacle between the mobile phone and the system. Some mobile phones may connect and • disconnect constantly when you make or end calls. This does not indicate any malfunction of the system. For some mobile phones, the Bluetooth • connection may be deactivated automatically as a power-saving feature. This does not indicate any malfunction of the system. Preset stations lost. Battery cable is not correctly connected. • Connect the battery cable to the terminal that is always live. Fuse is broken The Fuse type is incorrect. Replace it with • a 5A fuse. Speaker wire or power wire is grounded. • Check the connections. Display show ERR-12 USB/SD/MMC data error. Check the USB • device or SD/MMC card. About Bluetooth device Music playback is unavailable on the system even after successful Bluetooth connection. The device cannot be used with the • system to play music. The audio quality is poor after connection with a Bluetooth-enabled device. The Bluetooth reception is poor. Move • the device closer to the system or remove any obstacle between the device and the system. Cannot connect with the system. The device does not support the profiles • required for the system. The Bluetooth function of the device is • not enabled. Refer to the user manual of the device for how to enable the function. The system is not in the pairing mode. • The system is already connected with • another Bluetooth-enabled device. Disconnect that device or all other connected devices and then try again. English EN

flash memory. SDHC Secure Digital High Capacity (SDHC) is a type of flash memory card based on the SDA 2.00 specification. The SDA 2.00 specification enables SD cards to reach higher capacities from 4GB to 32GB, and growing. W WMA (Windows Media Audio) An audio format owned by Microsoft, is a part of Microsoft Windows Media technology. Includes Microsoft Digital Rights Management tools, Windows Media Video encoding technology, and Windows Media Audio encoding technology. 11 Glossary B Bite rate The max data transfer through the USB port. Bluetooth Bluetooth® is a short-rang wireless protocol that is meant to allow mobile devices to share information and applications without the worry of cables or interface incompatibilities. The name refers to a Viking King who unified Denmark. Operate at 2.4GHz. For more information, see www.bluetooth.com. M MMC MultimediaCard. A type of memory card with a flash memory. MP3 A file format with a sound data compression system. MP3 is the abbreviation of Motion Picture Experts Group 1 (or MPEG-1) Audio Layer 3. With the MP3 format, one CD-R or CD-RW can contain about 10 times more data than a regular CD. R Region code A system that allows discs to be played only in the region designated. This unit only plays discs that have compatible region codes. You can find the region code of your unit on the product label. Some discs are compatible with more than one region (or ALL regions.) EN

႓೒d ; ,QGLFDWHVWKDWWKLVWR[LFRUKD]DUGRXVVXEVWDQFHFRQWDLQHGLQDWOHDVWRQHRIWKHKRPRJHQHRXV PDWHULDOVXVHGIRUWKLVSDUWLVDERYHWKHOLPLWUHTXLUHPHQWLQ6-7 –  ࠮Ѯ඲ᄊ౛ྭ(QYLURQPHQWDO3URWHFWLRQ8VH3HULRG تኒ࿲ཱԣసሱ߅ᄗ؇ᄗٟᄗ޿འራࡩᅏฯᅿሀԪ඲ᄊ؇ສ࣓ྑӤࡘڡඕ໵࿦ࡩ໎үĩتኒ࿲ཱԣసᄊࠞ඲ᄊ ܠتኒ࿲ཱԣసӤࡘٵ࠮ॄᆑՐၚሹཌ೻ࡩٵ౥ഈඈcӯԣᆑՐၚሹ็޿؇౛ྭd 7KLVORJRUHIHUVWRWKHSHULRG\HDUVGXULQJZKLFKWKHWR[LFRUKD]DUGRXVVXEVWDQFHVRUHOHPHQWV FRQWDLQHGLQHOHFWURQLFLQIRUPDWLRQSURGXFWVZLOOQRWOHDNRUPXWDWHVRWKDWWKHXVHRIWKHVH>VXEVWDQFHV RUHOHPHQWV@ZLOOQRWUHVXOWLQDQ\VHYHUHHQYLURQPHQWDOSROOXWLRQDQ\ERGLO\LQMXU\RUGDPDJHWRDQ\ DVVHWV