Heat & Glo LifeStyle Dakota-AU 7145 Installation & Operation Instructions

For Service or Replacement Parts Contact: Melbourne Jetmaster 444 Swan Street Richmond 3121 (03) 9429-5573 Sydney Jetmaster 10 Martin Avenue Arncliff 2205 (02) 9597-7222 Perth Fireplace Corner 277 Lord Street East Perth 6000 (08) 9228-2600 ...

For Service or Replacement Parts Contact: Melbourne Jetmaster 444 Swan Street Richmond 3121 (03) 9429-5573 Sydney Jetmaster 10 Martin Avenue Arncliff 2205 (02) 9597-7222 Perth Fireplace Corner 277 Lord Street East Perth 6000 (08) 9228-2600 ...

Although the frequency of fi replace servicing and maintenance will depend on use and the type of installation, a qualifi ed service technician should perform an fi replace check-up annually. Debris from any outside source and/or soot must be removed from the fi replace. Allow logs to cool, remove if necessary, vacuum and replace in accordance with instructions on pages 13-16. It is imperative that control compartments, burners, and circulating air passageways of the appliance be kept clean. Annual inspection by q ...

33 This page intentionally left blank. ...

For Service or Replacement Parts Contact: Melbourne Jetmaster 444 Swan Street Richmond 3121 (03) 9429-5573 Sydney Jetmaster 10 Martin Avenue Arncliff 2205 (02) 9597-7222 Perth Fireplace Corner 277 Lord Street East Perth 6000 (08) 9228-2600 ...

1 1 Listing and Code Approvals A. Design and Installation Considerations 2 2 Getting Started Before installation check that local distribution conditions, nature of gas and pressure, and adjustment of the fi replace are compatible. This fi replace must be installed with the rules in force, and used only in a suffi ciently ventilated space. Consult instruc- tions before installation and use of this fi replace. • Carefully remove the fi replace and components from the packaging. • The gas logs are packaged separ ...

15 Place right front corner log between the right side wall and right side grate bar as shown. Place right side log against the rightmost front grate bar and rest its rear on right rear log, angled towards the corner as shown. Place right center log between the 4th and 5th vertical bars on the log grate, resting the back on right rear log. Figure 8.13 Front Right Log (SRV724) (front view) Figure 8.14 Top view Figure 8.15 Right Side Log (SRV740) (front view) Figure 8.16 Top view Figure 8.17 Right Front Corner Log (SRV ...