Sony CMT-CP33MD - Micro Hi Fi Component System Operating Instructions Manual

3 Press . or > repeatedly until “All Erase ?” appears, then press ENTER/ YES. “All Erase ??” appears. 4 Press ENTER/YES again. “Complete !!” appears for a few seconds and the disc title, all recorded tracks and their titles are erased. To cancel erasing Press MENU/NO. To return to the condition before ERASE You can return to the original condition immediately after erasing the tracks by using Undo Function on page 55. Erasing a portion of a track — A-B Erase Function You can specify a portion within a track and erase the portion with ease. You can shift ...

Labeling an MD — Name Function You can create titles for your recorded MDs and tracks as follows. During recording If “CD-TEXT” lights up or flashes in the display during recording a CD, you can record the CD disc title on the MD (see page 34). However, the CD disc title is not recorded when recording a CD on an MD and a tape at the same time. After recording Use Name Function on this page. You can input a total of approximately 1700 characters for the disc title and track titles on a single MD. x . > N `/1 X M m CURSORT 2,3 7 4 5 4 1 CLEAR 1 Press MD to switch ...

Recording on a tape manually — Manual Recording With manual recording, you can record just the portions you like from a CD or an MD on a tape. You can also record a radio program. The recording level is automatically adjusted. 3 4 5 2 6 1 Insert a blank tape. 2 Press FUNCTION repeatedly to select the desired source (e.g., TUNER) to record. • CD: Recording from the CD • MD: Recording from the MD • TUNER: Recording from the radio 3 Press TAPE REC z. The tape deck stands by for recording. 4 Press TAPE nN to light up the right indicator to record starting fro ...

Moving recorded tracks — Move Function You can use this function to change the order of any track on the disc. When you move tracks, the tracks are automatically renumbered. Example: Moving track 3 to position 2. 1 2 3 1 2 3 4 4 A B C D C B D A 1 Press MD to switch the function to MD. 2 Press MENU/NO to display “Edit Menu.” 3 Press . or > repeatedly until “Move ?” appears, then press ENTER/ YES. 4 Press . or > repeatedly until the desired track number to move appears, then press ENTER/YES. 5 Press . or > repeatedly until the new track position appears. Trac ...

properly. cRemove the MD once, then insert it again. C14/Toc Error The MD deck cannot read the disc information properly. cReplace the MD. cErase all the recorded contents of the MD using All Erase Function (see page 48). C41/Cannot Copy The sound source is a copy of commercially available music software, or you tried to record a CD-R (Recordable CD). cThe Serial Copy Management System prevents making a digital copy (see page 74). You cannot record a CD-R. Messages One of the following messages may appear or ...

Selecting the tracks 1 Press CD on the remote to switch the function to CD. 2 Press PLAY MODE on the remote repeatedly until “PGM” appears. 3 Press . or > on the remote repeatedly until the desired track number appears. Recording on an MD 6 Insert a recordable MD. 7 Press SYNCHRO REC repeatedly until “CD-MD SYNC” appears. 8 Press ENTER/START. The MD deck stands by for recording and the CD player pauses for play. 9 Press ENTER/START again. CD playing and MD recording start. When the recording is completed, the CD player and the MD deck stop automatically. To ...