Sony HCD-RG555 Service Manual

CD Model Name Using Similar Mechanism NEW Section CD Mechanism Type CDM74-F1BD81 Optical Pick-up Name KSM-215DCP/C2NP Tape Deck Model Name Using Similar Machanism NEW Section Tape Transport Mechanism Type CWM43RR-35 SERVICE MANUAL E Model HCD-RG555 Amplifier section The following measured at AC 120, 127, 220, 240 V, 50/60 Hz DIN power output (rated): 120 + 120 watts (6 ohms at 1 kHz, DIN) Continuous RMS power output (reference): 150 + 150 watts (6 ohms at 1 kHz, 10% THD) Inputs VIDEO/MD IN (phono jack): voltage 450/250 mV, impedance 47 kilohms GAME INPUT AUDIO L/R (phono jacks): voltage 250 mV, impedance 47 kilohms GAME INPUT VIDEO (phono jack): 1 Vp-p, 75 ohms MIC (phone jack): sensitivity 1 mV, impedance 10 kilohms Outputs PHONES (stereo mini jack): accepts headphones of 8 ohms or more VIDEO OUT (phono jack):max. output level 1 Vp-p, unbalanced, Sync negative, load impedance 75 ohms SPEAKER: accepts impedance of 6 to 16 ohms SPECIFICATIONS CD player section System Compact disc and digital audio system Laser Semiconductor laser (λ=770 – 810 nm) Emission duration: continuous Frequency response 2 Hz – 20 kHz (±0.5 dB) Signal-to-noise ratio More than 90 dB Dynamic range More than 90 dB Tape deck section Recording system 4-track 2-channel, stereo Frequency response 50 – 13,000 Hz (±3 dB), using Sony TYPE I cassettes Tuner section FM stereo, FM/AM superheterodyne tuner Sony Corporation Home Audio Company Published by Sony Engineering Corporation 9-877-774-01 2004D04-1 © 2004. 04 – Continued on next page – MINI HI-FI COMPONENT SYSTEM • HCD-RG555 is the tuner, deck, CD and amplifier section in MHC-RG555.

Tuning range 87.5 – 108.0 MHz (50 kHz step) Antenna FM lead antenna Antenna terminals 75 ohms unbalanced Intermediate frequency 10.7 MHz AM tuner section Tuning range Saudi Arabian model: 531 – 1,602 kHz (with the tuning interval set at 9 kHz) Other models: 530 – 1,710 kHz (with the tuning interval set at 10 kHz) 531 – 1,602 kHz (with the tuning interval set at 9 kHz) Antenna AM loop antenna Antenna terminals External antenna terminal Intermediate frequency 450 kHz General Power requirements Saudi Arabian model: 120 – 127 V/220 V or 230 – 240 V AC, 50/60 Hz Adjustable with voltage selector Other models: 120 V, 220 V or 230 – 240 V AC, 50/60 Hz Adjustable with voltage selector Power consumption 155 watts Dimensions (w/h/d) incl. projecting parts and controls Amplifier/Tuner/Tape/CD section: Approx. 280 × 327 × 425 mm Mass Approx. 10.0 kg Design and specifications are subject to change without notice.

COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY. To Exposed Metal Parts on Set 0.15 µF 1.5 kΩ AC Voltmeter (0.75 V) Earth Ground Fig. A. Using an AC voltmeter to check AC leakage. SAFETY CHECK-OUT After correcting the original service problem, perform the following safety check before releasing the set to the customer: Check the antenna terminals, metal trim, “metallized” knobs, screws, and all other exposed metal parts for AC leakage. Check leakage as described below. LEAKAGE TEST The AC leakage from any exposed metal part to earth ground and from all exposed metal parts to any exposed metal part having a return to chassis, must not exceed 0.5 mA (500 microamperes). Leakage current can be measured by any one of three methods. 1. A commercial leakage tester, such as the Simpson 229 or RCA WT-540A. Follow the manufacturers’ instructions to use these instruments. 2. A battery-operated AC milliammeter. The Data Precision 245 digital multimeter is suitable for this job. 3. Measuring the voltage drop across a resistor by means of a VOM or battery-operated AC voltmeter. The “limit” indication is 0.75 V, so analog meters must have an accurate low-voltage scale. The Simpson 250 and Sanwa SH-63Trd are examples of a passive VOM that is suitable. Nearly all battery operated digital multimeters that have a 2V AC range are suitable. (See Fig. A) HCD-RG555

other than those specified herein may result in hazardous radiation exposure. HCD-RG555 NOTES ON HANDLING THE OPTICAL PICK-UP BLOCK OR BASE UNIT The laser diode in the optical pick-up block may suffer electrostatic breakdown because of the potential difference generated by the charged electrostatic load, etc. on clothing and the human body. During repair, pay attention to electrostatic break-down and also use the procedure in the printed matter which is included in the repair parts. The flexible board is easily damaged and should be handled with care. NOTES ON LASER DIODE EMISSION CHECK The laser beam on this model is concentrated so as to be focused on the disc reflective surface by the objective lens in the optical pick- up block. Therefore, when checking the laser diode emission, observe from more than 30 cm away from the objective lens. Laser component in this product is capable of emitting radiation exceeding the limit for Class 1. Notes on Chip Component Replacement • Never reuse a disconnected chip component. • Notice that the minus side of a tantalum capacitor may be damaged by heat. Flexible Circuit Board Repairing • Keep the temperature of soldering iron around 270°C during repairing. • Do not touch the soldering iron on the same conductor of the circuit board (within 3 times). • Be careful not to apply force on the conductor when soldering or unsoldering. The release method of a CD disc tray LOCK function There is a disc lock function for the disc theft prevention for a demonstration at a shop front in this machine. Procedue: 1. Press the ?/1 button to turn the set on. 2. Press two buttons of x and Z (EJECT) simultaneously for five seconds. 3. The message “LOCKED” is displayed and the tray is locked. (Even if exiting from this mode, the tray is still locked.) 4. Press two buttons of x and Z (EJECT) simultaneously for five seconds again. 5. The message “UNLOCKED” is displayed and the tray is unlocked. 6. To exit from this mode, press the ?/1 button to turn the set off. Unleaded solder Boards requiring use of unleaded solder are printed with the lead- free mark (LF) indicating the solder contains no lead. (Caution: Some printed circuit boards may not come printed with the lead free mark due to their particular size.) : LEAD FREE MARK Unleaded solder has the following characteristics. • Unleaded solder melts at a temperature about 40°C higher than ordinary solder. Ordinary soldering irons can be used but the iron tip has to be applied to the solder joint for a slightly longer time. Soldering irons using a temperature regulator should be set to about 350°C. Caution: The printed pattern (copper foil) may peel away if the heated tip is applied for too long, so be careful! • Strong viscosity Unleaded solder is more viscous (sticky, less prone to flow) than ordinary solder so use caution not to let solder bridges occur such as on IC pins, etc. • Usable with ordinary solder It is best to use only unleaded solder but unleaded solder may also be added to ordinary solder.

HCD-RG555 1. SERVICING NOTE 1-1. Service Position-1 (AMP Board) ........................................ 6 1-2. Service Position-2 (BD81A Board) .................................... 6 2. GENERAL Main Unit ................................................................................ 7 Remote Control ....................................................................... 8 3. DISASSEMBLY 3-1. Case (Top) ......................................................................... 10 3-2. CD Door ............................................................................ 10 3-3. Front Panel Section ........................................................... 11 3-4. CD Mechanism Deck ........................................................ 11 3-5. Tape Mechanism Deck, Mic Jack Board ........................... 12 3-6. Panel Board ....................................................................... 12 3-7. Back Panel Section, Sub Trans Board ............................... 13 3-8. Trans Board ....................................................................... 13 3-9. Main Board ....................................................................... 14 3-10. Amp Board ........................................................................ 14 3-11. BD81A Board ................................................................... 15 3-12. Connect Board................................................................... 15 3-13. Driver Board, SW Board ................................................... 16 3-14. Optical Pick-up ................................................................. 16 3-15. Sensor Board ..................................................................... 17 3-16. Motor (TB) Board ............................................................. 17 3-17. Motor (LD) Board ............................................................. 18 4. TEST MODE ..................................................................... 19 5. DIAGRAMS 5-1. IC Pin Descriptions ........................................................... 22 5-2. Block Diagram –CD Section–........................................... 27 5-3. Block Diagram –Main Section– ........................................ 28 5-4. Block Diagram –Panel/Power Section– ............................ 29 5-5. Circuit Boards Location .................................................... 30 5-6. Note for Printed Wiring Boards and Schematic Diagrams .................................................. 31 5-7. Waveforms......................................................................... 31 5-8. Printed Wiring Board –CD Mechanism Section (1/2)– .... 32 5-9. Schematic Diagram –CD Mechanism Section (1/2)– ....... 33 5-10. Printed Wiring Boards –CD Mechanism Section (2/2)– ... 34 5-11. Schematic Diagram –CD Mechanism Section (2/2)– ....... 35 5-12. Schematic Diagram –Main Section (1/2)– ........................ 36 5-13. Schematic Diagram –Main Section (2/2)– ........................ 37 5-14. Printed Wiring Board –Main Section– .............................. 38 5-15. Printed Wiring Boards –Panel Section– ............................ 39 5-16. Schematic Diagram –Panel Section (1/2)– ....................... 40 5-17. Schematic Diagram –Panel Section (2/2)– ....................... 41 5-18. Printed Wiring Boards –Jack Section– .............................. 42 5-19. Schematic Diagram –Jack Section– .................................. 43 5-20. Printed Wiring Board –Power Amp Section– ................... 44 5-21. Printed Wiring Boards –Transformer Section– ................. 45 5-22. Schematic Diagram –Power Section– ............................... 46 5-23. IC Block Diagrams............................................................ 47 6. EXPLODED VIEWS 6-1. Main Section ..................................................................... 50 6-2. Front Panel Section (1)...................................................... 51 6-3. Front Panel Section (2)...................................................... 52 6-4. Front Panel Section (3)...................................................... 53 6-5. Main Board Section .......................................................... 54 6-6. CD Mechanism Section (1) ............................................... 55 6-7. CD Mechanism Section (2) ............................................... 56 7. ELECTRICAL PARTS LIST ........................................ 57

1-2. SERVICE POSITION-2 (BD81A BOARD) front panel CD mechanism deck AMP board To inspect the AMP board, turn both of the front panel and the CD mechanism deck so that the left side of the product faces down. BD81A board CD mechanism deck Remove the CD mechanism deck and place it on top of the pedestal as shown. Inspect the BD81A board in this set up.

3-1. CASE (TOP) (Page 10) 3-2. CD DOOR (Page 10) SET 3-3. FRONT PANEL SECTION (Page 11) 3-11. BD81A BOARD (Page 15) 3-12. CONNECT BOARD (Page 15) 3-15. SENSOR BOARD (Page 17) 3-16. MOTOR (TB) BOARD (Page 17) 3-17. MOTOR (LD) BOARD (Page 18) 3-13. DRIVER BOARD, SW BOARD (Page 16) 3-14. OPTICAL PICK-UP (Page 16) 3-4. CD MECHANISM DECK (Page 11) 3-8. TRANS BOARD (Page 13) 3-6. PANEL BOARD (Page 12) 3-5. TAPE MECHANISM DECK, MIC JACK BOARD (Page 12) 3-7. BACK PANEL SECTION, SUB TRANS BOARD (Page 13) 3-9. MAIN BOARD (Page 14) 3-10. AMP BOARD (Page 14)

Note : Follow the disassembly procedure in the numerical order given. 3-1. CASE (TOP) 5 qg qf qf qa 6 case (side-R) qs case (side-L) qh case (top) 1 two screws (case 3 TP2) qd two screws (+BVTP 3 × 10) 7 two screws (case 3 TP2) 2 screw (case 3 TP2) 8 screw (case 3 TP2) 3 screw (+BVTP 3 × 10) 9 screw (+BVTP 3 × 10) 0 screw (+BVTP 3 × 10) 4 screw (+BVTP 3 × 10) 3 two claws 4 CD door 2 Pull-out the disc tray. 1 Turn the pulley to the direction of the arrow. pulley Front panel side CD mechanism deck (CDM74)

3-3. FRONT PANEL SECTION 9 2 CN302 qf front panel section 0 CN309 qd CN103 qa CN304 1 CN805 3 CN823 qs CN102 6 three screws (+BVTP 3 × 8) 7 screw (+BVTP 3 × 10) 5 screw (+BVTP 3 × 8) 4 screw (+BVTP 3 × 8) 8 screw (+BVTP 3 × 10) MAIN board MAIN board 2 CN701 4 CD mechanism deck 3 CN874 1 three screws (+BVTP 3 × 10)

3-6. PANEL BOARD 1 connector 2 seven screws (+BVTP 2.6 × 8) 3 tape mechanism deck 6 MIC JACK board jack bracket 4 two screws (+BVTP 2.6 × 8) 5 two screws (+BVTP 3 × 10) 4 seven claws 6 CN604 5 CN605 1 connector 7 PANEL board 2 eight screws (+BVTP 2.6 × 8) 3 two screws (+BVTP 2.6 × 8)

3-8. TRANS BOARD 1 CN904 3 CN901 4 CN101 5 CN308 8 2 CN906 6 two screws (+BVTP 3 × 10) 9 two screws (+BVTP 3 × 10) 0 SUB TRANS board qa back panel section 7 three screws (+BVTP 3 × 10) 1 CN905 2 CN907 4 earth wire 3 screw (+BVIT 3 × 8R) 5 four screws (+ITC 4 × 8) 6 TRANS board

3-9. MAIN BOARD MAIN board 1 CN907 3 CN441 4 MAIN board 2 two screws (+BVTP 3 × 8) 7 2 two screws (+BVTT 4 × 8) 6 two screws (transistor) 4 screw (+BVIT 3 × 8R) 5 screw (+BVIT 3 × 8R) 3 screw (+BVTP 3 × 14) 1 CN905 9 AMP board 8 heat sink

3 screw (+BVTP 2.6 × 8) 4 gap tube 6 BD81A board 5 Remove soldering from the four points. 1 CN202 2 CN101 3-12. CONNECT BOARD 2 two screws (+BVTP 2.6 × 8) 3 CONNECT board 1 CN871

3-14. OPTICAL PICK-UP 1 two screws (+BTTP (M2.6)) 5 screw (+BTTP (M2.6)) 4 DRIVER board 3 CN703 6 SW board 2 CN702 6 two coil springs (insulator) 0 two coil springs (insulator) 7 two insulators qa two insulators 8 two screws (BVTT M2.6) 4 screw (BVTT M2.6) 2 holder (213) ASSY 9 two stoppers (BU) 5 stopper (BU) qd optical pick-up (KSM-215DCP/C2NP) 3 floating screw (+PTPWH M2.6) qs 1 floating screw (+PTPWH M2.6)

2 tray 3 belt (table) 5 pulley (table) 8 screw (+BTTP (M2.6)) 0 SENSOR board 7 gear (geneva) 1 floating screw (+PTPWH M2.6) 6 floating screw (+PTPWH M2.6) 4 floating screw (+PTPWH M2.6) 9 CN731 3-16. MOTOR (TB) BOARD 6 Remove the two solderings of motor. 8 MOTOR (TB) board 7 table motor assy (M741) 5 two screws (+BTTP (M2.6)) 4 1 stopper 2 stopper 3 CN742

4 Remove the two solderings of motor. 3 MOTOR (LD) board 1 belt (loading) 5 loading motor assy (M751) 2 two screws (+BTTP (M2.6))

10 kHz] • A step of AM channels can be changed over between 9 kHz and 10 kHz. Procedure: 1. Press ?/1 button to turn the set ON. 2. Select the function “TUNER”, and press TUNER/BAND button to select the BAND “AM”. 3. Press ?/1 button to turn the set OFF. 4. Press TUNER/BAND and ?/1 buttons simultaneously, and the display of fluorescent indicator tube changes to “AM 9 k STEP” or “AM 10 k STEP”, and thus the channel step is changed over. [Cold Reset] • The cold reset clears all data including preset data stored in the RAM to initial conditions. Execute this mode when returning the set to the customer. Procedure: 1. Press three buttons x , PLAY MODE/TUNING MODE , and DISC 1 simultaneously. 2. The fluorescent indicator tube displays “COLD RESET” and the set is reset. [Aging Mode] This mode can be used for operation check of CD section and tape deck section. • If an error occurred: The aging operation stops and is displayed status. • If no error occurs: The aging operation continues repeatedly. 1. Operating method of Aging Mode Turn on the main power and select “CD” of the function. 1) Set three discs in tray. Select ALL DISCS, and REPEAT OFF. 2) Load the tapes recording use into both decks. 3) Press three buttons x , PLAY MODE/TUNING MODE , and EX-CHANGE simultaneously. 4) Aging operations of CD and tape are started at the same time. 5) To exit the aging mode, perform [Cold Reset]. 2. Aging mode in CD section 1) Operation during aging mode • In the agining mode, the program is excuted in the following sequence. (1) The disc tray opens and closes. (2) The disc tray turns to select a disc 3. (3) The pick-up accesses to the first track, and plays 3 seconds. (4) The pick-up accesses to the last track, and plays 3 seconds. (5) The disc tray opens and closes. (6) The disc tray turns to select a disc 1. (7) The same operation starts like step (3). (8) After a disc 1 aging operation, a disc 2 is selected. (9) When an aging operation of a disc 3 is completed, the display “AGING ∗∗∗∗” value increases. (10) If no error occurs, the aging operation continues repeatedly. 2) Error display Step 1 2 3 4 5 6 7 8 9 10 11 12 Operation Rewind the TAPE A Rewind the TAPE B Play the TAPE A (1 minute) Stop the TAPE A (1 second) Play the TAPE A (3 minutes) Rewind(AMS) the TAPE A F.F.(AMS) the TAPE A Play the TAPE B (1 minute) Stop the TAPE B (1 second) Record the TAPE B (3 minutes) Rewind(AMS) the TAPE B F.F.(AMS) the TAPE B Display TAPE AAG-1 TAPE BAG-2 TAPE AAG-2 TAPE AAG-3 TAPE AAG-4 TAPE AAG-5 TAPE AAG-6 TAPE BAG-2 TAPE BAG-3 TAPE BAG-4 TAPE BAG-5 TAPE BAG-6 Disc error Display Error E00D01022 Focus error (No disc) E00D02022 Sub Q error (Focus is good) E00D02023 TOC reading error E00D02014 Access error (Unable within regular time) Mechanism error Display Error E00M__E_0 Error during opening tray E00M__C_2 EX-CHANGE disc error E00M__D_0 Error during closing tray E00M__F_3 EX-OPEN error E00M__D_5 EX-CLOSE error E00M__C_2 Chuck-up error E00M__C_3 Unchucking error 3. Aging mode in Tape Deck section 1) Operation during aging mode • In the agining mode, the program is excuted in the following sequence. 2) Error display • If error occurred, the display remains like “TAPE BAG-2”. 4. Exiting from the aging mode • Be sure to perform Cold Reset to exit from the aging mode.

• This mode is used to test the function of the equalizer. Procedure: 1. Press ?/1 button to turn the set ON. 2. To enter the test mode, press the three buttons x , PLAY MODE/TUNING MODE and DISC 3 simultaneously. 3. Press the EQ + button. The function of the equalizer is set to “MIN”. 4. Press the EQ – button. The function of the equalizer is set to “MAX”. 5. Press the PRESET EQ button. The function of the equalizer is set to “EQ FLAT”. 6. MASTER VOLUME up and down. “VOLUME MIN” “VOLUME 16” “VOLUME MAX” is displayed. 7. Press the GROOVE button. The message “VACS OFF” or “VACS ON” is displayed. 8. To exit from this mode, press ?/1 button to turn the set OFF. [CD Ship Mode (LOCK) ] • This mode moves the pick-up to the position durable to vibra- tion. Use this mode when returning the set to the customer after repair. Procedure: 1. Press ?/1 button to turn the set ON. 2. Select the function “CD”. 3. Press ?/1 button to turn the set OFF. 4. Press CD button and ?/1 button simultaneously. 5. The “STANDBY” display blinks instantaneously, and the CD ship mode is set. [CD Ship (LOCK) & COLD RESET MODE] Procedure: 1. Press ?/1 button to turn the set ON. 2. Select the function “CD”. 3. Press ?/1 button to turn the set OFF. 4. Press three buttons x , CD and DISPLAY simultaneously. 5. The “STANDBY” display blinks instantaneously and CD ship mode is set. 6. To fluorescent indicator tube displays “COLD RESET” and the set is reset. [Disc Tray Lock] Procedure: 1. Press the ?/1 button to turn the set ON. 2. Press two buttons of x and Z simultaneously for five seconds. 3. The message “LOCKED” is displayed and the tray is locked. (Even if exiting from this mode, the tray is still locked.) 4. Press two buttons of x and Z simultaneously for five seconds again. 5. The message “UNLOCKED” is displayed and the tray is unlocked. 6. To exit from this mode, press the ?/1 button to turn the set OFF. [PANEL Test Mode] • All fluorecent segments and LEDs are tested. • Keyboard check. Procedure: 1. Press ?/1 button to turn the set ON. 2. To enter the test mode, press the three buttons x , PLAY MODE/TUNING MODE and ENTER simultaneously. 3. All segments and LEDs (without STANDBY LED) are turned on. 4. Press X and ENTER buttons simultaneously, and the key check mode is activated. 5. The message “KEY 0 0 0 ” is displayed. Each time a button is pressed, the key code number is displayed. 6. Press X and ENTER buttons simultaneously, and the key count mode is activated. 7. The message “KEYCNT 0” is displayed. Each time a button is pressed, “KEYCNT 0” value increased. However, once a button is pressed, it is no longer taken into account. 8. Press X and ENTER buttons simultaneously, and the head phone detect mode is activated. 9. The message “H_P OFF” is displayed when a headphone jack is not inserted. “H_P ON ” is displayed when a headphone jack is inserted. 10. Press X and ENTER buttons simultaneously, and the volume control detect mode is activated. 11. The message “VOLUME FLAT” is displayed. “VOLUME UP” is displayed if rotating MASTER VOLUME knob clockwise, or “VOLUME DOWN” is displayed if rotating counterclockwise. 12. To exit from the GC test mode after the head phone detect mode, press X and ENTER buttons simultaneously. [Version and Destination Display Mode] • The version or destination is displayed. Procedure: 1. Press ?/1 button to turn the set ON. 2. To enter the test mode, press the three buttons x , PLAY MODE/TUNING MODE and DISC 2 simultaneously. 3. The destination is displayed. 4. Press DISPLAY buttons simultaneously. 5. The version is displayed. 6. To exit from this mode, press ?/1 button to turn the set OFF. [CD Service Mode] • This mode can run the CD sled motor freely. Use this mode, for instance, when cleaning the pick-up. Procedure: 1. Press ?/1 button to turn the set ON. 2. Select the function “CD”. 3. To enter the test mode, press three buttons x , PLAY MODE/ TUNING MODE , and Z simultaneously. 4. The CD service mode is selected. 5. With the CD in stop status, press M button to move the pick-up to outside track, or press m button to inside track. 6. To exit from this mode, perform as follows: 1) Move the pick-up to the most inside track. 2) Press ?/1 button to turn the set OFF. Note: • Always move the pick-up to most inside track when exiting from this mode. Otherwise, a disc will not be unloaded. • Do not run the sled motor excessively, otherwise the gear can be chipped.

Procedure: 1. Press ?/1 button to turn the set ON. 2. Select the function “CD”. 3. Press three buttons x , CD and ENTER simultaneously. 4. The message “LIMIT OFF” is displayed. 5. Press ?/1 button the set OFF. [AMP TEST MODE] Procedure: 1. Press ?/1 button to turn the set ON. 2. To enter the test mode, press three buttons x , PLAY MODE/TUNING MODE and ENTER simultaneously. 3. Press the DISPLAY button. The message “V0 0 0” “ 000” is displayed. 4. Press the GROOVE button. The message “DBFB ON” “DBFB OFF” is displayed. 5. Press the SURROUND button. The message “SURROUND ON” “SURROUND OFF” is displayed. 6. Press the EQ BAND button. The message “LOW” “MID” “HIGH” is displayed. 7. Press ?/1 button to turn the set OFF.

• IC101 CXD3059AR (RF AMP) (BD81A BOARD) Pin No. Pin Name I/O Pin Description 1 MIRR I/O Mirror signal input/output Not used in this set. (Open) 2 DFCT I/O Defect signal input/output Not used in this set. (Open) 3 FOK I/O Focus OK signal input/output Not used in this set. (Open) 4 VSS — Internal digital ground pin 5 LOCK I/O GFS is sampled at 460Hz; when GFS is high , this pin outputs a high signal If GFS is low eight consecutive Not used in this set. (Open) 6 MDP O Spindle motor servo control signal output 7 SSTP I Disc innermost detection signal input 8 IOVSS1 — I/O digital ground pin 9 SFDR O Sled drive signal output 10 SRDR O Sled drive signal output 11 TFDR O Tracking drive signal output 12 TRDR O Tracking drive signal output 13 FFDR O Focus drive signal output 14 FRDR O Focus drive signal output 15 IOVDD1 — I/O digital power supply pin (+3.3 V) 16 AVDD0 — Analog power supply pin (+3.3 V) 17 AVSS0 — Analog ground pin 18 NC — Not used. (Open) 19 E I E signal input 20 F I F signal input 21 TEI I Tracking error signal input 22 TEO O Tracking error signal output 23 FEI I Focus error signal input 24 FEO O Focus error signal output 25 VC O Center voltage output 26 A I A signal input 27 B I B signal input 28 C I C signal input 29 D I D signal input 30 NC — Not used. (Open) 31 AVDD4 — Analog power supply pin (+3.3 V) 32 RFDCO O RFDC signal output Not used in this set. (Open) 33 PDSENS I Reference voltage pin for PD Connect to ground in this set. 34 AC_SUM O RFAC summing amplifier signal output 35 EQ_IN I Equalizer circuit signal input 36 LD O APC amplifier signal output 37 PD I APC amplifier signal input 38 NC — Not used. (Open) 39 RFC I Equalizer cut-off frequency adjustment pin 40 AVSS4 — Analog ground pin 41 RFACO O RFAC signal output 42 RFACI I RFAC signal input or EFM signal input 43 AVDD3 — Analog power supply pin (+3.3 V) 44 BIAS I Asymmetry circuit constant current signal input 45 ASYI I Asymmetry comparator voltage signal input 46 ASYO O EFM full-swing signal output (Low=VSS, High=VDD) 47 VPCO O Wide-band EFM PLL charge pump signal output Not used in this set. (Open) 48 VCTL I Wide-band EFM PLL VCO2 control voltage signal input 49 AVSS3 — Analog ground pin 50 CLTV I Multiplier VCO1 control voltage signal input

52 FILI I Master PLL filter signal input 53 PCO O Master PLL charge pump signal output 54 AVDD5 — Analog power supply pin (+3.3 V) 55 DDVROUT O DC/DC converter signal output 56 DDVRSEN I DC/DC converter output voltage monitor pin 57 AVSS5 — Analog ground pin 58 DDCR I DC/DC converter reset pin 59 NC — Not used. (Open) 60 BCKI I D/A interface bit clock signal input 61 PCMDI I D/A interface serial data signal input (2’s COMP, MSB first) 62 LRCKI I D/A interface LR clock signal input 63 LRCK O D/A interface LR clock signal output f=Fs 64 VSS — Internal digital ground pin 65 PCMD O D/A interface serial data signal output (2’s COMP, MSB first) 66 BCK O D/A interface bit clock signal output 67 VDD — Internal digital power supply pin (+3.3 V) 68 EMPH O High when the playback disc has emphasis, low it has not 69 EMPHI I High when de-emphasis is ON, low when input OFF 70 IOVDD2 — I/O digital power supply pin (+3.3 V) 71 DOUT O Digital signal output 72 TEST I Test pin Normally ground 73 TES1 I Test pin Normally ground 74 IOVSS2 — I/O digital ground pin 75 NC — Not used. (Open) 76 XVSS — Master clock ground pin 77 XTAO O Crystal oscillation circuit signal output (16.9 MHz) 78 XTAI I Crystal oscillation circuit signal input (16.9 MHz) 79 XVDD — Master clock power supply pin (+3.3 V) 80 AVDD1 — Analog power supply pin (+3.3 V) 81 AOUT1 O Lch analog signal output 82 VREFL O Lch reference voltage signal output 83 AVSS1 — Analog ground pin 84 AVSS2 — Analog ground pin 85 VREFR O Rch reference voltage signal output 86 AOUT2 O Rch analog signal output 87 AVDD2 — Analog power supply pin (+3.3 V) 88 NC — Not used. (Open) 89 IOVDD0 — I/O digital power supply pin (+3.3 V) 90 RMUT O Rch “0” detection flag Not used in this set. (Open) 91 LMUT O Lch “0” detection flag Not used in this set. (Open) 92 NC — Not used. (Open) 93 XTSL I Crystal selection input Not used in this set. (Connect to ground.) 94 IOVSS0 — I/O digital ground pin 95 XTACN I Oscillation circuit control signal input Self-oscillation when high, oscillation stop when low 96 SQSO O Subcode Q 80-bit and PCM peak and level data signal output CD TEXT data signal output Not used in this set. (Open) 97 SQCK I SQSO readout clock signal input 98 SBSO O Subcode P to W serial signal output Not used in this set. (Open) 99 EXCK I SBSO readout clock signal input Not used in this set. (Open) 100 XRST I System reset signal input “L”: Reset 101 SYSM I Mute signal input “H”: Mute Connect to ground in this set.

103 VSS — Internal digital ground pin 104 XLAT I Latch signal input The serial data is latched at the falling edge 105 CLOCK I Serial data transfer clock signal input 106 VDD — Internal digital power supply pin (+3.3 V) 107 SENS O SENS signal output 108 SCLK I SENS serial data readout clock signal input 109 ATSK I/O Anti-shock signal input/output Not used in this set. (Open) 110 WFCK O WFCK signal output Not used in this set. (Open) 111 XUGF O XUGF signal output Not used in this set. (Open) 112 XPCK O XPCK signal output Not used in this set. (Open) 113 GFS O GFS signal output Not used in this set. (Open) 114 C2PO O C2PO signal output Not used in this set. (Open) 115 SCOR O High output when the subcode sync, S0 or S1, is detected 116 VDD — Internal digital power supply pin (+3.3 V) 117 C4M O 4.2336MHz signal output Not used in this set. (Open) 118 WDCK O Word clock signal output f=2Fs Not used in this set. (Open) 119 COUT I/O Track number count signal input/output Not used in this set. (Open) 120 NC — Not used. (Open)

Pin No. Pin Name I/O Pin Description 1 O-MP3 CS O CS signal output to CD digital processor 2 O-MP3 LP MOTER O LP signal output to CD digital processor and motor signal output 3 I-MP3 ACK SOL-B I ACK signal input from CD digital processor and motor signal input 4 O-MP3 REQ SOL-A O REQ signal output to CD digital processor and motor signal output 5 I-SCOR I CD scor signal input 6 O-MP3 RESET O RESET signal output to CD digital processor 7 I-BU1924 DATA I Data signal input Connect to ground in this set. 8 I-BU1924 CLK I Clock signal input Connect to ground in this set. 9 I-VOLUME-IN1 I Volume signal input from the encoder 10 I-VOLUME-IN2 I Volume signal input from the encoder 11 RESET I Reset signal input 12 I-XT1 I Connection for input a crystal resonator (32.768 kHz) 13 I-XT2 O Connection for input a crystal resonator (32.768 kHz) 14 VSS1 — Ground pin 15 CF1 I Connection for input a ceramic resonator (10 MHz) 16 CF2 O Connection for input a ceramic resonator (10 MHz) 17 VDD1 — Power supply pin (+1.5 V) 18 I-PROTECT I Power amplifier circuit protection signal input 19 WFR/HP/MIC-IN I SubWoofer or Headphone detection signal input 20 I-CD ENCODER I Signal input from the CD encoder 21 I-CD OPEN/CLOSE I CD tray open switch signal input 22 I-TAPE A START I TAPE A switches signal input 23 I-TAPE B START I TAPE B switches signal input 24 I-STREAM/VACS I Stream/Vacs signal input 25 I-KEY 3 I Function key input 3 26 I-KEY 2 I Function key input 2 27 I-KEY 1 I Function key input 1 28 I-SIRDS-IN I Data signal input from the remote contorol receiver 29 I-AC CUT I Power down signal input 30 to 42 G13 to G1 O FL tube grid signal output 43 to 45 S1 to S3 O FL tube segment signal output 46 VDD3 — Power supply pin (+3.3 V) 47 to 49 S4 to S6 O FL tube segment signal output 50 S7/METER-SW1 O FL tube segment signal output 51 –VPP — Power supply (–) pin (–26 V) 52 S8/METER-SW2 O FL tube segment signal output 53 S9/METER-SW3 O FL tube segment signal output 54 to 63 S10/SW1 to S19/SW10 O FL tube segment signal output 64, 65 S20, S21 O FL tube segment signal output 66 I-SPEC/MODEL/METER I METER swich signal input 67 I-TUNED-IN I Tuning frequency signal input 68 I-STEREO-IN I Stereo tuning signal input 69 I-AMS-IN I AMS signal input 70 I-REEL-A-IN I A deck photo sensor signal input 71 I-REEL-B-IN I B deck photo sensor signal input 72 VDD4 — Power supply pin (+3.3 V) 73 I-CD NUM SENSOR I Table address sensor swich signal input 74 O-POWER-RELAY O POWER RELAY control signal output 75 O-SYSTEM-MUTE O System muting signal output 76 O-POWER-LED O POWER LED control signal output 77 STREAM-LED6/SOL B O Illumination LED control signal output 78 STREAM-LED5/SOL A O Illumination LED control signal output

80 STREAM-LED3/MP3-STB O Illumination LED control signal output 81 STREAM-LED2 O Illumination LED control signal output 82 STREAM-LED1 O Illumination LED control signal output 83 I-LC72121 DI I Data signal input from tuner 84 O-LC72121 CE O Chip select signal output to tuner 85 O-LC72121/BU2099FV DO O Data signal input from tuner and SP driver 86 O-LC72121/BU2099FV CLK O Clock signal output to tuner and SP driver 87 O-BU2099FV LCH O LCH signal output to SP driver 88 O-BD3401 CLK O Clock signal output to sound processor 89 VSS2 — Ground pin 90 VDD2 — Power supply pin (+3.5 V) 91 O-BD3401 DATA O Data signal output to sound processor 92 O-XTCN O CD XTCN signal output 93 O-XRES (RESET) O CD reset signal output 94 O-XLT (CD-LAT) O CD latch signal output 95 O-CD-DATA O CD data signal output 96 I-SENS I CD SENS signal input 97 O-CD-CLK O CD clock signal output 98 O-MP3-DO O MP3 data signal output to CD digital processor 99 I-MP3-DI I MP3 data signal input from CD digital processor 100 O-MP3-CLK O MP3 clock signal output to CD digital processor

(Page 28) (Page 29) (Page 28) OPTICAL PICK-UP BLOCK (KSM-215DCP) LD DRIVER Q10 +1.7V +3.3V LD GND FOCUS COIL F+ F T+ T TRACKING COIL IC251 S101 (LIMIT) X171 16.9344MHz +3.3V SL/SP MOTOR DRIVER IC101 RF AMP 16 7 15 17 18 VR PD 19 20 21 22 5 30 3 24 MUTE CH2OUT-F CH1FIN CH1RIN CH2FIN CH3FIN OPIN+ CH2OUT-R CH1OUT-R CH1OUT-F CH4OUT-R CH4OUT-F CH3OUT-F CH3OUT-R M M M101 (SPINDLE) M102 (SLED) VC VCC A B C D E F DETECTOR A B E 19 F 20 LD 36 PD 37 TFDR 11 SSTP 7 FFDR 13 SFDR 9 MPD 6 95 XTACN 100 XRST 102 DATA 104 XLAT 105 CLOCK 86 AOUT2 81 AOUT1 71 DOUT 61 PCMDI 62 LRCKI 63 LRCK 65 PCMD DIGITAL SIGNAL PROCESSOR IC301 21 40 SDO0 11 LRCKIA 16 SFSY/LRCKIB 19 SDIO 14 77 XTAO 78 XTAI 55 VDD VDD VDDM 26 27 C 28 D 29 107 SENS XTACN XRST DATA XLT CLOCK SENS TRDR 12 29 CH3RIN SRDR 10 CH2RIN FRDR 14 66 BCK 60 BCKI BCKIA 15 SBSY/BCKIB 18 6 +3.3V 8 5 1 3 STANBY 36 PO11/BUCK/AD1 8 MIACK 7 MICK 6 MIDIO 4 MICS 5 MILP 2 RESET 115 SCOR SCOR +1.5V REG IC303 MP3-DO MP3-REQ MP3-ACK MP3-CLK MP3-DI MP3-LP MP3-CS MP3-RST MP-3STB SCOR SENS CD-CLOCK XLT(CD-LAT) CD-DATA XRST XTCN SCOR SENS CLOCK XLT DATA XRST XTACN CD-L CD-R DOUT A PANEL SECTION B MAIN SECTION TABLE SENSOR IC731 LD MOTOR DRIVER IC701 TBL MOTOR DRIVER IC712 4 2 9 7 RIN FIN OUT1 OUT2 4 2 9 7 RIN FIN OUT1 OUT2 D MAIN SECTION LM-R LM-F TM-R TM-F TBL ADDRESS SENS E-1 E-2 E-3 OPEN SW M751 (LOADING) M741 (TABLE) RE701 S751 (OPEN) ROTARY ENCODER E-3 E-2 E-1 TBL ADDRESS SENSE SWITCH Q731 M M D+3.3V : CD • Signal Path • R-CH is omitted due to same as L-CH.

TBL ADDRESS SENS OPEN SW E-2 E-1 E-3 LM-R LM-F TM-R TM-F LM-R LM-F TM-R TM-F D CD SECTION TM901 TUNER SOUND PROCESSOR IC101 BUFFER IC102 61 TUNER_L 19 SI SP R-CH 18 SO 63 MD-L 59 GAME-L 9 TAPEA1 11 TAPEB1 15 REC-OUT1 DATA RCLK 1 CDL 24 I-STREEMA/VACS 75 SYSTEM-MUTE 69 AMS 19 WFR/HP/MIC 18 PROTECT 73 CD NUM SENSOR 21 CD-OPEN/CLOSE 20 CD ENCORDER CLK DATA 91 88 35 34 BBIN1 BBNF1 31 BBNF2 40 ASMOUT 11 Q5 12 Q6 7 Q1 6 Q0 CD-R R-CH R-CH CD-L MP3-STB R-CH FRONT SP RELAY R-CH SP DRIVER IC371 SELECTOR IC201 IC601(1/2) OVERLOAD DET Q481,482 OVERLOAD DET Q441,442 RELAY DRIVE Q485-488 R-CH RY441 3 DATA DO 5 LCK LCH 4 CLK 18 SO 11 MP3 STB CLK SO 7 8 SOL-B SOL-B SOL-A MOTOR 6 SOL-A MOTOR VIDEO BUFFER IC602 L R GAME INPUT VIDEO OUT JK441 BUFFER Q106 BUFFER Q107 BUFFER Q327 MUTE Q103 MUTE CONTROL Q101,102 MUTE Q489-491 STK AC3 RELAY+B FAN DRIVE Q310-Q312 OVERHEAT DET Q483,Q484 TH441 MUTE Q306 CD-MUTE MUTE CONTROL Q304,305 TUNER-L TUNER-R DO DI CLK CE TUNED STEREO TU-MUTE DO DI CLK CE TUNED STEREO J805 J803 DECK-A DECK-B VIDEO R-CH L R BIAS OSC Q321 Q324 +9V STK CD-MUTE R-CH REC SW CONT P/B SW R-CH L R HP2 HP1 L R HRP2 HRP1 HE1 L101 TAPE STK MUTE CONTROL Q308 10 Q4 FRONT SP RELAY 17 Q11 LM-R 13 Q7 LM-F 14 Q8 TM-R 15 Q9 TM-F 16 4 Q10 DATA AC4 SO CLOCK B CD SECTION J801 PHONES FAN901 I-REEL-A 23 22 70 TAPE B START TAPE A START A SOL A-PHOTO REC(FWD) B MODE A MODE B HALF A HALF REC(REW) I-REEL-B 71 CLK 84 85 86 CE DI DO LCH 87 B-PHOTO B SOL CLK CE 68 STEREO 67 TUNED STEREO TUNED DATA RCLK DO 83 DI LCH CAPM+ 55 SAOUT2 30 BBIN2 58 MIC SWITCH Q351,Q352 STK MUTE CONTROL Q309,313 INVERTER Q372 SPEAKER 33 VOUT1 32 VOUT2 9 7 4 SWITCH Q322,323 3 5 LCH CAP M DRIVE Q601 B TRIP DRIVE Q602 A TRIP DRIVE Q603 JK802 MIC POWER AMP IC441 AUDIO JK101 R-CH L R VIDEO/MD IN MECHANISM DECK SOL-B SOL-A MOTOR SYSTEM CONTORLLER MUTE CONTROL SWITCH Q802 MUTE Q801 VR801 MIC+9V MIC AMP IC801 (2/2) MIC AMP IC801 (1/2) MIC LEVEL • Signal Path • R-CH is omitted due to same as L-CH. : TUNER : CD : PB(DECK A) : PB(DECK B) : AUDIO : REC(DECK B) (Page 27) (Page 27)

SYSTEM CONTROLLER IC601(2/2) 12 I-XT1 X601 32.768kHz 13 I-XT2 15 CF1 X602 10MHz 16 CF2 28 1 SIRDS-IN REMOTE CONTROL RECIEVER IC610 82 STREM-LED1 74 42 30 POWER RELAY 11 RESET 29 AC CUT MASTER VOLUME A CD SECTION 25 KEY3 MP3-RESET 6 MP3-REQ 4 MP3-ACK 3 MP3-LP 2 MP3-CS 1 MP3-CLK 100 MP3-DI 99 MP3-DO 98 CD-CLK 97 SENS 96 CD-DATA 95 XLT 94 XRES 93 XTCN 92 SCOR 5 FUNCTION KEY S641-S650,SW601 27 KEY1 FUNCTION KEY S601-S608,S610-S612 26 KEY2 FUNCTION KEY S621-S630 9 VOLUME-IN1 10 VOLUME-IN2 ENCODER S660 LED DRIVER Q610 LED610 LED DRIVER Q612 LED DRIVER Q611 LED DRIVER Q614 LED DRIVER Q615 LED DRIVER Q613 80 STREM-LED3 LED612 81 STREM-LED2 LED611 77 STREM-LED6 LED615 78 STREM-LED5 LED614 79 STREM-LED4 LED613 76 POWER LED G01-G13 S1-S21 LED601 AC3 D301-D304 D908 –VFL F906 D402 VL+ VL– F908 D401 VH+ VH– F905 F909 F904 AC4 VF1 VF2 D305-D308 D902-905 F907 REG Q902 D+3.5V SW+3.5V 1 3 RELAY DRIVE Q361,362 +9V 1 3 D309-D312 M+9V VF1 –VFL VF2 1 3 A+3.5V REG IC302 D+3.5V REG IC301 +9V REG IC303 M+9V REG IC304 A+3.5V 1 3 +4V EVER+9V +3.5V PT902 SUB TRANSFORMER PT901 POWER TRANSFORMER +4V REG IC603 1 5 RESET IC604 1 3 RESET SWITCH Q605 FL601 FLUORESCENT INDICATOR TUBE SCOR XTCN XRST XLT(CD LAT) CD-DATA SENS CD-CLK MP3-DO MP3-DI MP3-CLK MP3-CS MP3-LP MP3-ACK MP3-REQ MP3-RESET C15 C14 C13 C12 C11 C10 C9 C8 C7 C6 C5 C4 C3 C2 C1 C1 C2 C3 C4 C5 C6 C7 C8 C9 C10 C11 C12 C13 C14 C15 43 45 47 50 52 65 B+ SWITCH Q604,616 M+9V AC4 B+ SWITCH Q315,316 RY901 S901 VOLTAGE SELECTOR LIVE 220V 240V LIVE 220V 240V AC IN (Page 27)

MOTOR (LD) board SW board SENSOR board BD81A board MOTOR (TB) board DRIVER board CONNECT board SUB TRANS board AMP board VIDEO OUT board MIC JACK board PANEL board 6 STREAM LED board H/P JACK board MAIN board TRANS board REM board

5-7. WAVEFORMS Note on Printed Wiring Board: • X : parts extracted from the component side. • Y : parts extracted from the conductor side. • : Pattern from the side which enables seeing. (The other layer’s patterns are not indicated.) Caution: Pattern face side: Parts on the pattern face side seen from (Conductor Side) the pattern face are indicated. Parts face side: Parts on the parts face side seen from (Component Side) the parts face are indicated. C B These are omitted. E Q B These are omitted. C E Q B These are omitted. C E Q Note on Schematic Diagram: • All capacitors are in µF unless otherwise noted. pF: µµF 50 WV or less are not indicated except for electrolytics and tantalums. • All resistors are in Ω and 1/4 W or less unless otherwise specified. • 2 : nonflammable resistor. • C : panel designation. • Indication of transistor. • A : B+ Line. • B : B– Line. • Voltage and waveforms are dc with respect to ground under no-signal (detuned) conditions. no mark : FM ( ) : CD PLAY ∗ : Impossible to measure • Voltages are taken with a VOM (Input impedance 10 MΩ). Voltage variations may be noted due to normal produc- tion tolerances. • Waveforms are taken with a oscilloscope. Voltage variations may be noted due to normal produc- tion tolerances. • Circled numbers refer to waveforms. • Signal path. F : TUNER (FM/AM) J : CD PLAY E : TAPE PLAY (DECK-A) d : TAPE PLAY (DECK-B) G : REC f : AUDIO • Abbreviation E3 : 240 V AC area in E model E15 : 220 – 240 V AC area in E model EA : Saudi Arabia model SP : Singapore model MY : Malaysia model UNLEADED SOLDER Boards requiring use of unleaded solder are printed with the lead free mark (LF) indicating the solder contains no lead. (Caution: Some printed circuit boards may not come printed with the lead free mark due to their particular size) : LEAD FREE MARK Unleaded solder has the following characteristics. • Unleaded solder melts at a temperature about 40 °C higher than ordinary solder. Ordinary soldering irons can be used but the iron tip has to be applied to the solder joint for a slightly longer time. Soldering irons using a temperature regulator should be set to about 350 °C. Caution: The printed pattern (copper foil) may peel away if the heated tip is applied for too long, so be careful! • Strong viscosity Unleaded solder is more viscou-s (sticky, less prone to flow) than ordinary solder so use caution not to let solder bridges occur such as on IC pins, etc. • Usable with ordinary solder It is best to use only unleaded solder but unleaded solder may also be added to ordinary solder. Note: The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. – PANEL Board – 1 2 IC601 qh (CF2) IC601 qd (I-XT2) 2V/DIV, 10µs/DIV 2V/DIV, 40ns/DIV 5.2 Vp-p 30.5 s 4.9 Vp-p 100 ns

: Uses unleaded solder. (Page 42) 1 A B C D E F G H 2 3 4 5 6 7 8 9 10 11 12 13 14 C10 C260 C14 C15 C16 C18 C11 R405 C316 R354 R353 R352 R351 R302 R253 C315 R191 R172 R171 R162 R313 X171 R121 R12 R11 R10 Q10 C116 C312 C184 C183 C303 C305 C259 C258 C257 C255 C203 C196 C195 C201 C182 C171 C172 C308 C151 C134 C125 C314 C123 R165 R13 C17 FB301 C318 C174 R173 R205 C209 C210 C302 R201 R419 R412 R411 R410 R409 R408 R407 R406 R404 R403 R402 R401 R305 R303 R301 R252 R251 R182 R181 R163 R151 R143 R142 R141 R133 R132 R131 R114 R113 R112 R111 R307 C311 C310 C309 C307 C306 IC251 C252 C251 C194 C181 IC101 C163 C162 C143 C142 C141 C133 C132 C131 C124 C111 C122 C115 C114 C113 C112 IC301 C185 C186 R306 CN101 CN201 C317 R202 R203 R161 C161 C211 C212 R204 C213 IC303 C313 C320 M101 M102 S101 Ref. No. Location IC101 F-11 IC251 D-8 IC301 D-11 IC303 B-12 Q10 G-6 • Semiconductor Location

IC B/D IC B/D TP165 TP166 TP178 TP186 TP187 TP167 TP177 TP121 TP122 TP123 C305 JPO004 JPO10 TP250 TP301 TP302 TP303 TP304 TP103 R163 R352 R353 R354 R401 R402 R403 R404 R405 R406 R407 R408 R409 R411 R412 R419 R11 R132 R251 R253 R12 R10 JPO102 JPO103 M101 C17 C151 C201 C203 C308 CN101 R121 C183 C184 TP420 TP421 TP422 TP423 TP424 R252 TP425 TP426 TP427 TP428 TP429 TP431 TP432 R13 Q10 R313 TP433 TP436 TP401 TP407 TP406 TP405 TP404 TP403 TP402 TP408 TP410 TP434 TP417 TP416 TP415 TP414 TP413 TP412 TP419 TP411 TP409 TP19 TP18 TP16 TP15 TP102 TP14 TP13 TP12 TP11 TP10 R131 R301 R303 R173 R203 R302 R162 R205 R410 C320 C163 C196 M102 TP253 TP252 TP251 R112 R114 R111 R113 R305 IC301 R141 R307 TP125 TP124 TP142 TP149 C307 C309 C310 C311 C316 C315 C317 C312 C302 FB301 CN201 C212 C213 TP435 C211 C314 R306 C313 C318 C306 R351 C161 C174 C162 R161 TP104 TP105 C181 R181 R182 C182 IC101 C194 C143 C134 C133 C131 C124 C123 C122 C125 C132 C209 C210 TP148 TP145 TP144 TP147 TP153 TP146 TP160 TP162 S101 C195 C115 C114 C112 C16 C15 C10 C11 TP430 C251 C252 C255 C257 C260 IC303 R204 R201 R165 R151 R143 C171 R171 R172 C172 C186 C185 C14 TP17 C258 C259 IC251 C303 R191 R133 C141 R142 C142 X171 C111 C113 C116 C18 (Page 43)

: Uses unleaded solder. (Page 38) 1 A B C D E F G H 2 3 4 5 6 7 8 9 10 11 12 13 14 (LEVER SW) CN751 S751 IC731 CN731 CN741 CN742 C715 C731 C735 C736 R701 R711 R731 R721 R722 R723 R735 R732 R733 R734 D701 D711 Q731 C751 IC712 IC701 CN704 C737 R713 R712 C741 R702 JW702 JW703 JW704 JW705 JW706 JW707 JW708 JW711 CN703 CN702 CN705 R751 C752 CN701 JW712 JW701 JW709 JW710 JW713 JW714 CN721 MAIN BOARD CN301 Ref. No. Location D701 D-6 D711 D-7 IC701 F-6 IC712 F-7 IC731 E-11 Q731 C-9 • Semiconductor Location

IC B/D IC B/D R751 C752 CN705 CN704 CN721 CN751 C751 IC701 IC712 R701 D701 R713 R711 R723 R721 R722 C735 C736 C737 R735 R733 R731 C731 Q731 C741 CN702 CN703 CN701 RE701 IC731 CN731 CN741 CN742 CN751 C715 R702 R712 R732 R734 D711 S751 M751 M741 (Page 37)

(Page 37) IC B/D EP101 C177 C187 C141 C145 C176 D201 D206 D207 R176 R177 R163 R166 R153 R154 R136 R227 R228 R202 R203 R204 R217 R138 R151 R221 R222 R225 R229 R232 R109 R110 R394 R393 R392 R391 Q106 Q304 D324 D325 Q310 R170 R172 R201 R207 R206 R113 R162 R158 R157 Q311 C124 Q101 C229 Q312 C228 C235 R226 IC101 C193 C206 R115 R129 R155 R272 C188 R173 R174 R175 Q105 C190 R385 R390 R386 R101 Q102 Q305 C179 C181 C274 C275 R282 R283 R284 R168 R135 C185 IC102 C186 C184 C175 R165 R161 C178 C183 C165 C160 C152 C153 R133 C143 C142 C138 C137 C123 C127 C102 C125 R117 R120 C128 C129 R121 C147 C144 C149 C151 C150 C148 R134 C146 C101 R198 C118 C192 C191 C122 C114 C113 C112 C111 R281 R208 R209 R205 R210 R211 R212 C211 C213 C212 C216 C222 C214 FB201 FB203 FB204 C217 FB202 R387 R388 R220 C103 R103 C106 C109 C108 CN308 C230 R152 C189 Q107 CN307 JW311 R389 JW202 JW201 R167 R171 C157 C159 C107 R102 R116 R156 R216 CN309 C166 R219 R218 D203 D204 D205 CN305 D326 R223 R164 R160 R159 C154 R137 R141 C162 R142 C164 R105 R197 R108 R106 R107 C104 C110 C105 R104 C121 R112 C117 C119 C115 R254 R127 C132 R119 R169 R230 R395 JK101 R143 R144 R145 C171 R146 C172 Q104 Q103 R140 C167 C169 C140 C139 R132 R131 C136 C135 R128 C116 R111 C120 R114 R194 R195 FB205 Q372 R399 R398 Q306 Q307 D202 FAN901 R280 R231 CN304 C126 (Page 43) (Page 43) (Page 46) (Page 43)

IC B/D IC B/D C311 D301 D304 D303 C309 C312 C313 C318 D305 D306 D307 Q322 R263 R264 R265 R266 R262 C253 R253 C315 R247 Q324 R250 R251 R249 EP301 D309 D310 D312 D311 R384 R379 R375 R378 C375 C372 Q361 R361 R362 R364 R363 Q351 C351 Q352 R344 R245 C266 HE1 C265 C308 R307 R306 R308 R311 R310 R313 R274 Q313 Q309 Q314 R322 R324 D321 R325 D316 R323 IC301 IC304 Q323 C250 Q321 Q327 D214 D213 D212 IC303 C241 D211 C316 Q362 C270 R356 R353 R352 R351 R357 R354 R358 R348 IC201 C249 HRP1 HRP2 HP1 HP2 D313 C251 R213 R214 C376 D322 Q315 R321 D215 C354 C342 CN301 R343 R347 R248 CN103 C244 C242 R241 R246 R371 C374 D302 C303 C304 C302 C301 R275 C252 C259 R383 R382 Q308 JW301 CN112 C264 C353 CN303 C306 JW303 JW302 JW305 IC371 D308 C305 R381 CN302 R380 R312 R273 IC302 C310 L101 C248 C371 R342 R341 R345 R346 C352 C258 C321 R377 R376 R374 C373 R373 R372 C267 D314 D315 C243 R242 R243 R252 C246 R244 CN101 (Page 46) (Page 40) (Page 35) (Page 36)

: Uses unleaded solder. 1 A B C D E F G H I J 2 3 4 5 6 7 8 9 10 11 12 B1 R143 R144 C171 C172 R140 R243 R244 R252 R399 R141 R142 Q372 R105 R108 R111 R114 IC101 R242 R194 R195 C121 C117 R145 R146 R398 R189 R174 R175 R173 Q105 C190 C228 R226 R225 R227 R228 R230 R229 D207 D206 D202 C371 IC371 Q314 IC102 R216 R217 R324 C120 C108 R101 R102 R103 R104 R106 R107 R109 R110 R112 R113 R115 R116 R117 R373 R372 R371 C375 R245 R379 R381 R382 R383 R384 R374 R375 R376 R377 R378 C372 C373 R137 R138 R127 C124 C125 R176 R177 R253 R135 R136 R134 R133 R132 R213 C105 C264 C265 C116 C241 R241 C248 R246 R247 Q322 Q323 R248 R249 D211 R250 R251 R262 R263 R264 R265 R351 R352 R354 R357 R358 D212 D213 D214 Q327 C351 Q351 Q352 R128 R129 R131 R119 R120 R121 Q107 Q106 C177 C179 C182 C183 C187 C181 R166 R167 R168 R169 R170 R171 R266 R208 R212 R211 R161 C217 C216 R172 R391 R392 R393 R394 R395 R385 R386 R387 R388 R389 R390 R165 R160 R164 R159 R163 Q103 Q104 R158 R162 R157 R155 R156 R153 R154 R151 R152 Q102 Q101 R232 R231 D322 Q361 Q362 R361 R363 R364 R201 R202 R204 R205 R206 R207 R210 R272 R203 Q304 Q305 Q306 Q307 C235 R344 R345 R346 R347 R341 R342 R343 R214 C266 R273 R220 R221 R222 R223 D201 R348 C267 R274 R321 Q309 R306 R307 R308 Q308 Q313 R310 R311 R312 R313 R380 R275 R197 R198 C193 C206 R323 Q315 D321 R325 R322 D316 D215 R280 C275 C274 C342 R283 R281 R284 R282 C222 R356 R353 R209 C354 C126 R254 R362 FB203 FB204 FB202 FB201 FB205 JW2 JW4 JW5 JW6 JW7 JW9 JW10 JW11 JW12 JW13 JW14 JW15 JW16 JW17 JW18 JW19 JW20 JW21 JW22 JW27 JW28 JW29 JW30 JW31 JW32 JW33 JW34 JW35 JW36 JW37 JW38 JW39 JW40 JW42 JW47 JW48 JW49 JW50 JW53 JW55 JW56 JW58 JW59 JW61 JW62 JW63 JW66 JW67 JW68 JW69 JW73 JW74 JW75 JW76 JW77 JW78 JW79 JW85 JW86 JW87 JW88 JW89 JW90 JW91 JW92 JW93 JW94 JW95 JW96 JW97 JW98 JW99 JW100 JW101 JW102 JW103 JW105 JW107 JW112 JW113 JW114 JW115 JW116 JW117 JW118 JW125 JW126 JW127 JW128 JW129 JW130 JW131 JW132 JW133 JW134 JW135 JW136 JW137 JW138 JW139 JW140 JW141 JW142 JW302 L101 CN101 JK101 JW203 JW204 JW201 JW202 C169 CN303 C167 C162 C164 CN304 C246 C243 JW301 JW65 JW64 JW54 JW46 JW104 JW8 JW143 JW144 JW83 JW303 JW110 JW24 JW23 JW51 JW52 JW109 JW145 JW146 JW72 JW57 JW148 JW121 JW123 JW305 JW149 JW150 JW108 JW119 JW120 JW82 JW80 JW156 JW157 JW158 D203 D204 D205 CN305 CN302 IC302 D326 JW151 JW122 JW45 JW26 JW304 JW84 JW71 JW44 JW41 CN112 JW70 JW81 JW124 JW106 JW155 JW159 C188 C189 CN308 Q310 C230 C229 Q311 JW3 D309 IC201 CN307 C313 CN301 CN309 EP301 EP101 C309 C315 C318 C301 C302 C303 C304 C305 C306 D301 D303 D304 D305 D306 D307 D308 C310 R218 R219 C312 C101 C102 C103 C104 C107 C139 C110 C111 C112 C113 C114 C251 C374 C249 D310 D311 D312 C308 C166 C165 C148 C160 C159 C157 C152 C153 C154 C127 C128 C129 C106 IC303 C135 C136 C123 C122 C119 C115 C150 C151 C144 C147 C145 C143 C141 C142 C140 C137 C138 C118 C242 C244 Q321 C250 Q324 C149 JW311 C252 C253 C258 C352 C353 C132 C178 C176 C184 C186 C213 C212 C192 D313 C316 D314 D315 C185 IC301 IC304 Q312 C270 LP301 C146 C211 C175 D324 D325 C109 C214 CN103 JW1 C191 LP303 LP302 C376 C321 C259 C311 D302 LP304 (Page 44) (Page 45) (Page 42) (Page 39) (Page 42) (Page 42) (Page 34) Ref. No. Location D201 I-9 D202 H-9 D206 I-9 D207 I-9 D211 F-3 D212 G-4 D213 G-4 D214 G-3 D215 G-3 D301 I-6 D302 I-7 D303 I-7 D304 I-7 D305 I-6 D306 I-6 D307 I-6 D308 I-6 D309 I-5 D310 I-5 D311 I-5 D312 I-5 D313 F-7 D316 G-5 D321 H-4 D322 H-4 D324 E-3 D325 E-2 D326 F-2 IC101 D-5 IC102 D-7 IC201 E-4 IC301 G-7 IC302 E-7 IC303 G-6 IC304 G-5 IC371 B-3 Q101 H-8 Q102 G-8 Q103 H-8 Q104 H-8 Q105 E-9 Q106 D-6 Q107 D-6 Q304 E-3 Q305 E-3 Q306 D-3 Q307 D-3 Q308 B-3 Q309 B-2 Q310 G-9 Q311 H-9 Q312 H-9 Q313 B-2 Q314 G-5 Q315 G-4 Q321 F-5 Q322 E-3 Q323 E-3 Q324 F-3 Q327 G-4 Q351 G-3 Q352 G-3 Q361 G-5 Q362 G-4 Q372 I-4 • Semiconductor Location

: Uses unleaded solder. 1 A B C D E F G H 2 3 4 5 6 7 8 9 10 11 12 13 14 Administrator SV-HCDRG555-PANEL JR624 IC610 CN610 JR622 JR623 JR614 D624 D627 JR612 D606 JR611 R742 C634 C633 R743 C632 R741 C631 R740 C630 R739 C629 R738 C628 R744 C635 R745 C636 R746 C637 R747 C638 R748 C639 R749 C640 R750 R737 R751 R752 R753 R754 R755 R756 R757 R758 R759 R760 R761 R762 R763 R764 R765 R766 R767 R768 R769 R770 D622 IC601 R771 R716 R718 R792 R793 R795 R796 R794 R717 R719 C641 R777 R778 R776 R775 R774 R677 C621 R785 R781 R782 R783 R780 R779 R627 R628 R629 R646 R645 R647 R676 R635 R697 R693 R690 R696 R695 R694 R691 R692 R664 R734 R665 R667 R666 R626 R648 R649 R650 R651 R663 R652 R678 R617 R616 R608 R607 R615 R798 R799 R618 R601 R619 R602 R611 R606 R603 R613 R797 R612 R614 R620 D630 R789 R773 D631 C643 R787 R784 R637 R636 R668 R610 R790 R609 R604 R605 R669 R670 R723 R733 R728 R727 R732 C625 C624 C626 R730 R729 R725 D610 C613 C655 R708 D616 R621 R625 R624 R622 D615 R702 R700 R704 R623 C618 JR621 R706 Q613 Q615 Q614 R698 R722 R713 R712 C617 R711 R710 R721 Q611 Q612 Q610 R679 D611 D609 R863 IC603 IC604 C642 R671 R720 R657 R658 R656 R655 R654 R653 R735 R675 R642 R736 R661 R662 JR608 JR609 JR617 R634 C603 R633 C602 R632 C601 IC602 R659 JR607 R638 R660 R731 C604 R672 R643 R644 R772 R683 R786 R684 Q616 D604 D605 D603 R639 R640 R641 R715 D607 R674 C607 C609 C606 C608 D632 R686 R681 C653 R680 R714 Q605 R685 D633 C611 R682 C614 D614 R689 R688 R687 D608 D613 R854 R788 R791 C649 C654 C656 JW696 JW697 JW698 JW699 JW610 JW611 JW612 JW613 JW614 JW615 JW616 JW617 JW618 JW619 JW621 JW622 JW623 JW624 JW627 JW628 JW629 JW630 JW633 JW637 JW639 JW643 JW644 JW645 JW646 JW647 JW648 JW651 JW652 JW653 JW654 JW657 JW661 JW662 JW663 JW664 JW665 JW666 JW667 JW668 JW669 JW671 JW672 JW675 JW676 JW677 JW678 JW679 JW680 JW681 JW682 JW683 JW686 JW687 JW688 JW689 JW690 JW692 JW693 JW694 JW695 JW700 JW710 JW711 JW713 JW715 JW717 JW719 JW720 JW725 JW726 JW727 JW730 JW731 JW732 JW733 JW734 JW735 JW736 JW737 JW738 JW739 JW740 JW741 JW743 JW744 JW745 JW746 JW747 JW748 JW749 JW750 JW751 JW752 JW753 JW754 JW755 JW756 JW757 JW758 JW759 JW760 JW761 JW762 JW763 JW764 JW765 JW766 JW767 JW768 JW769 JW770 JW771 JW772 JW773 JW774 JW775 JW776 JW777 JW778 JW779 JW780 JW785 JW786 JW787 JW788 JW789 JW790 JW791 JW792 JW793 JW794 JW795 JW796 JW797 JW798 JW799 JW800 JW801 JW802 JW803 JW804 JW805 JW806 JW807 JW808 JW809 JW810 JW813 JW815 WIRE806 JW691 JW702 JW814 JW704 JW632 JW634 S625 JW782 JW781 FL601 S601 S602 S621 S622 S626 S627 S623 S624 S630 S629 S628 S647 S649 S650 S644 S645 S646 S610 S608 S607 S611 S612 S643 S606 S605 S642 S641 S604 S603 C623 JW714 C622 CN603 JW601 JW602 CN601 JW812 CN602 Q603 Q601 C648 JW701 JW708 JW707 JW709 JW703 JW705 C612 JW722 JW723 JW724 JW728 JW635 JW721 JW729 X602 X601 JW718 JW674 C610 Q602 CN605 CN604 JW660 JW656 JW655 JW670 JW659 JW658 C619 JW673 C646 LED601 JW608 S648 JW607 JW641 JW606 JW626 C647 JW811 C644 C620 C605 Q604 C615 JW716 CN608 JW706 JW625 (Page 38) (Page 42) (Page 42) D603 C-12 D604 C-12 D605 C-12 D606 E-9 D607 C-11 D608 D-9 D609 E-9 D610 E-10 D611 E-9 D613 E-10 Ref. No. Location • Semiconductor Location Ref. No. Location D614 D-10 D615 G-7 D616 G-7 D622 B-6 D624 B-6 D627 B-6 D630 F-4 D631 D-10 D632 D-10 D633 D-9 IC601 C-7 IC602 E-12 IC603 E-10 IC604 D-10 IC610 A-14 LED601 B-12 Q601 H-7 Q602 G-7 Q603 G-7 Q604 B-11 Q605 D-9 Q610 F-9 Q611 F-8 Q612 F-8 Q613 G-9 Q614 G-9 Q615 G-9 Q616 B-11 Ref. No. Location Ref. No. Location

IC B/D R635 R691 R692 R693 R694 R695 R696 R697 Q610 CN604 R627 R690 C655 R720 R671 R721 R722 R659 R660 R661 R662 R658 R657 R656 R655 R654 R653 R675 R676 R664 R665 R666 R667 R668 R669 R670 R663 R652 R651 R650 R649 R648 R647 R646 R645 R644 R643 R642 R674 S601 S602 S603 S604 S605 S606 S607 S608 S610 S611 S612 S630 S629 S628 S627 S624 S623 S622 S621 S641 S642 S643 S644 S645 S646 S647 S649 S648 S650 S626 CN601 D604 D603 R641 C605 R640 R639 D605 R704 R706 R708 R700 R702 JW660 JW659 CN605 Q612 Q611 Q614 Q615 Q613 JW601 JW602 R629 R698 JW674 JW718 JW705 JW655 JW656 JW658 IC602 R672 R731 JW811 R638 C644 C604 R632 JW626 JW641 C601 C602 C603 JW625 R633 JW716 JW703 JW701 JW714 JW635 R634 S625 R628 R854 JR607 JR608 JR609 (Page 41) (Page 43) (Page 43) (Page 37)

(Page 43) 53H2 R732 R717 R733 R734 R735 R605 R603 R601 R602 R604 R736 R784 R750 R751 R752 R753 R754 R755 R756 R757 R758 R759 R760 R761 R762 R763 R764 R765 R766 R767 R768 R769 R770 R788 R791 R792 R793 R794 R795 R796 C654 R738 R739 R740 R741 R742 R743 R744 R745 R746 R747 R748 R621 R623 R625 R681 R729 R730 R749 R777 R778 R775 R608 R622 Q602 D616 R626 R798 R616 R799 R618 R620 Q603 R615 R617 R619 D615 R624 R613 R797 R612 R614 R611 R609 R790 R610 CN602 R607 R606 C648 C618 C617 C649 C653 C607 D609 D611 R727 R728 X601 C625 C624 C610 C611 X602 C647 D630 R678 D607 C646 C606 C608 C609 Q604 R684 R683 R786 Q616 R688 D613 R689 C615 IC604 D632 R687 C614 R685 R686 Q605 C613 C612 D608 IC610 CN610 CN608 C623 C628 C629 C630 C631 C632 C633 C634 C635 C636 C637 C638 C639 C640 C622 R716 R718 R719 C621 C620 C642 R714 R715 C619 R682 D614 JR621 Q601 R677 C643 C626 R772 R737 R789 R773 FL601 R785 R783 R782 R781 R780 R779 R774 JW812 CN603 R725 R723 R787 JW729 JW722 JW728 JW723 JW724 JW670 JW709 JW708 JW607 JW608 JW606 LED601 JW706 JW707 JW721 JW673 D627 D624 R637 R636 WIRE806 D606 R863 R679 D633 C656 JR624 D631 JR617 R776 C641 R680 JR612 JR611 R771 R713 R712 R710 R711 IC603 D610 D622 IC601 (Page 40)

: Uses unleaded solder. 1 A B C D E F G I J 2 3 4 5 6 7 8 9 10 11 12 13 14 JR872 JR871 FB871 FB872 C871 C876 C875 C872 C874 C873 LP873 LP874 LP872 LP871 CN874 JW871 JW877 JW874 JW873 JW875 JW879 CN873 CN871 JW878 JW872 JW876 R673 R705 R707 R709 R703 R701 R699 CN606 CN607 SW601 LED615 LED613 LED614 LED610 LED612 LED611 S660 CN805 J803 LP802 C832 C830 C831 JW831 W803 CN804 J801 IC801 R806 R805 R820 R819 C827 C828 C831 R832 Q802 C825 R810 C822 R809 R808 C823 R815 R821 R811 R814 C819 C820 R807 C824 R831 R830 Q801 R817 R813 R812 C821 R816 R818 JR806 JR805 C860 C855 JW803 JW804 JW805 JW806 JW807 JW808 JW809 JW810 JW811 JW813 JW812 JW819 JK802 J805 VR801 W802 C812 C814 C816 C815 C813 C818 C817 C829 C811 CN803 CN806 JW802 JW801 (Page 38) (Page 39) (Page 39) (Page 39) (Page 38) (Page 32) (Page 38) Ref. No. Location IC801 G-5 LED610 C-9 LED611 B-9 LED612 A-9 LED613 A-7 LED614 B-7 LED615 C-7 Q801 G-6 Q802 I-6 • Semiconductor Location

CN804 C830 C831 C832 J801 CN805 J803 JW871 JW872 JW873 JW874 JW879 CN874 JW876 JW875 JW878 JW877 FB871 FB872 CN873 C871 C872 C873 C874 C875 C876 JR872 JR871 SW601 S660 CN606 CN607 R699 R701 R703 R705 R709 R707 LED610 LED611 LED612 LED613 LED614 LED615 W803 R673 CN871 R807 C811 R810 C812 R808 R809 C814 R811 R815 C815 R813 R812 R814 R816 R818 R817 C817 C818 R832 R806 R805 R819 R820 C827 C828 JW802 C831 JW801 C855 C822 IC801(2/2) IC801(1/2) C825 C823 C820 C821 C819 C829 CN806 C830 W802 VR801 C816 Q801 Q802 JK802 C813 JR805 JR806 J805 CN803 C860 R821 C824 R831 R830 (Page 36) (Page 41) (Page 40) (Page 36) (Page 40) (Page 36)

: Uses unleaded solder. 1 A B C D E F G H I J 2 3 4 5 6 7 8 9 10 11 12 JW445 JW446 JW447 JW448 JW449 JW450 JW451 JW452 JW453 JW455 JW457 JW458 JW459 JW460 JW461 JW462 JW463 JW464 JW465 JW466 JW467 JW468 JW469 JW474 JW475 JW476 JW477 JW478 JW479 JW481 JW482 JW483 JW484 JW410 JW412 JW413 JW414 JW417 JW418 JW419 JW420 JW421 JW422 JW423 JW424 JW425 JW426 JW427 JW428 JW429 JW430 JW431 JW432 JW485 JW486 JW487 JW488 JW489 JW473 JW472 JW470 JW471 LP401 R409 EP402 C462 R414 C413 C414 Q482 Q481 C403 R484 R483 Q484 Q483 R485 R482 C402 R490 JK441 D482 Q486 R487 C487 R481 Q487 R407 C404 R488 R462 R461 L442 L441 RY441 TH441 Q485 C486 EP401 C454 CN441 R442 R455 R478 C461 R454 C442 Q490 R445 R472 R475 R450 D444 C453 C443 R402 C444 C447 R468 D442 D481 D446 C463 R458 R453 R474 Q491 R496 IC441 R456 R460 R410 R404 R412 CN442 R447 Q489 EP491 LP403 C452 C441 R413 D441 C446 Q441 R469 C448 R477 Q488 D401 JW403 R473 D445 R470 R401 JW411 R403 R471 R448 JW442 Q442 R476 R446 JW401 R467 C492 C406 C481 R466 C409 R459 JW443 C410 R449 JW441 C405 C445 R457 R444 R443 R441 LP402 R486 D443 JW415 R489 R465 JW404 R495 C451 JW409 LP404 JW416 D402 R411 (Page 38) (Page 45) Ref. No. Location D401 G-8 D402 H-9 D441 D-4 D442 D-5 D443 J-4 D444 B-5 D445 C-3 D446 C-3 D481 D-5 D482 G-4 IC441 D-3 Q441 D-4 Q442 D-4 Q481 D-4 Q482 D-4 Q483 A-4 Q484 A-4 Q485 G-3 Q486 G-4 Q487 G-4 Q488 G-4 Q489 B-4 Q490 C-5 Q491 C-5 • Semiconductor Location

: Uses unleaded solder. 1 A B C D E F G H I 2 3 4 5 6 7 8 9 10 11 12 13 14 PT901 JW928 JW929 JW930 JW931 JW932 JW933 JW934 F909 JW917 FH916 FH909 F908 CN907 FH912 FH911 F905 F906 F907 FH913 FH914 C906 R908 R904 C910 D906 R903 C908 Q902 JW909 W901 JW912 CN906 FH910 FH915 D908 FH908 CN905 FH907 FH917 FH918 LP902 LP903 CN904 F904 C911 C909 C920 C925 C923 C924 C922 C921 C926 JW920 JW921 JW922 JW923 JW911 JW924 JW901 D902 JW925 CN902 CN901 RY901 JW902 D901 S901 PT902 D905 D903 LP901 D904 CN903 JW905 (Page 44) (Page 38) Ref. No. Location D901 B-4 D902 B-2 D903 B-2 D904 B-2 D905 B-2 D906 C-13 D908 C-10 Q902 B-12 • Semiconductor Location

4P Q484 Q486 Q487 D482 TH441 D901 FH907 FH908 FH910 FH909 FH911 FH912 FH913 FH914 D908 C908 JW917 D441 D443 D481 Q441 Q442 Q489 Q490 C441 C442 C444 C461 C462 R467 R468 FH916 FH917 FH918 L441 L442 JW404 R450 C463 R908 CN907 C920 C921 C922 C923 C924 C925 C926 CN905 R903 D906 Q902 C909 C906 C911 JW909 CN906 W901 R904 FH915 PT901 C910 D902 D904 D903 D905 CN901 RY901 JW906 CN902 R446 R477 R469 R470 R496 R474 R472 R473 R455 R475 C492 R459 C453 R441 R442 R478 C452 C454 R454 R453 C451 R485 R481 R487 R488 R461 R462 CN441 JW409 JW411 R409 C403 R401 R403 C409 JW401 R410 C404 R402 R404 C410 CN442 R407 R486 Q483 R484 R483 R465 R466 Q482 C481 Q481 C486 R482 Q485 C487 R489 R490 Q488 D446 D442 R458 R456 R449 JW403 JW441 C445 JW442 C446 R448 D401 D402 Q491 R447 R471 R445 R443 C443 R476 R495 R444 C402 RY441 R457 EP491 JK441 EP401 EP402 D444 C413 C414 C405 C406 D445 IC441(1/2) R460 C447 C448 R413 R414 R412 IC441(2/2) F908 F904 F905 F909 F906 F907 JW912 CN904 CN903 PT902 C905 JW901 JW905 JW925 S901 R411 (Page 37) (Page 36)

5-23. IC BLOCK DIAGRAMS 33 34 35 36 37 38 39 40 41 42 1 8 43 61 62 63 64 60 59 56 52 50 47 46 45 44 48 49 25 26 27 28 29 30 31 32 17 18 19 20 21 22 23 24 9 10 11 2 3 4 5 6 7 58 57 55 53 51 12 13 14 15 16 54 RAS CAS OE WE PIO7 PIO6 PIO5 PIO4 Bus Switch BUCK CCE AD12 AD11 General In/Output Port Address Calc. 2sets Y-Pointer register C-Pointer register X-Pointer register VDDM SRMSTB VDDT AD10 AD9 ERAM 2k word CRAM 4k word CROM 4k word YRAM 4k word XRAM 4k word SRAM/ DRAM I/F SRAM I/F 1Mbit SRAM X-Bus Y-Bus AD7 AD6 AD5 AD8 VC0 Timing Generator PRAM Instruction Decoder Program Control MCU. I/F register XO • X1 • X2 Y0 • Y1 • Y2 MX MY MZ MAC A0 A1 AX AY ALU A2 A3 DIT round & limit round & limit Audio I/F LRCKIA BCKIA SDI0 LRCKO BCKO SDO0 VSS VDDT MIACK MICK MIDIO MILP MICS STANBY RESET VDDP AD4 AD3 AD2 AD1 AD0 VSS VDD CKO VDDX XO TEST VCOI VSSX XI MIMD VSSP PIO3 PIO2 PIO1 PIO0 VSS CKI VDD TXO SFSY SBSY DATA POM Sub code I/F CDP Cont I/F

15 16 17 18 19 20 21 22 23 24 25 26 27 36 28 29 30 31 32 33 34 35 1 2 3 4 5 6 7 8 9 10 11 12 13 14 LEVEL SHIFT F R R F R F F 19k 6.5k 50k 50k 100k 50k PIN3 10k Vref 50k 50k PIN26 (ch1, 2) POW VCC (ch3, 4) SW Pre Vcc INTER FACE INTER FACE INTER FACE R F 50k 50k POW VCC MUTE Vref POW VCC R F 10k CH1PUTF CH1OUTR CH2OUTF CH2OUTR POWVCC CNF4 GND C-M C-P VG CH2RIN CH2FIN CH1RIN CH1FIN SW OPIN+ OPIN- NC CH4OUTR CH4OUTF CH3OUTF CH3OUTR POWVCC MUTE GND GND PREGND CT CH3RIN CH3FIN CH4IN CH4CAPA OUTVREF DPOUT TREVCC NC D D D D D D D D IC701 BA6956AN (DRIVER BOARD) IC712 BA6956AN (DRIVER BOARD) 1 2 3 4 5 6 7 8 9 CONTROL LOGIC TSD VREF OUT2 OUT1 RNF VM VCC FIN GND RIN

IC201 BA3126N (MAIN BOARD) IC371 BU2099FV (MAIN BOARD) IC602 BU2099FV (PANEL BOARD) 0 + TNF2 TNF1 SUR1 SUR2 LINEOUT2 LINEOUT1 SAOUT2 SAOUT1 CAP MIC GAME L GAME R TUNER L TUNER R MD L MD R VOLOUT1 TONE OUT1 TONE OUT2 AMS OUT BNF2 BNF1 MNF1 MNF2 MOUT1 MOUT2 BOUT2 BOUT1 BBNF1 BBIN1 VIN1 VIN2 VOLOUT2 BBNF2 BBIN2 LF1 LF2 LF3 LF4 SWOUT FILTER 1/2 Vcc Vcc GND VDD SI SC ALC CD L CD R TAPE L TAPE R PBNF2 PBNF1 PBOUT2 PBOUT1 TAPE A1 TAPE A2 TAPE B1 TAPE B2 RECNF2 RECNF1 DIGITAL CONTROL Di-LIMITER RECOUT2 RECOUT1 46 45 44 43 42 41 40 39 38 37 36 35 34 33 48 47 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 SURROUND ATT ATT BUFFER MIX MIC MIX VOCAL FADER + - + - BASS MIDDLE TREBLE BASS MIDDLE TREBLE G fc=100HZ f ALC ALC INPUT SELECTOR + + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - 49 SOFT SWITCH + + - + - + 1 REC SW1 2 3 PB SW1 GND 4 CONT 5 GND 6 VCC 7 PB SW2 8 GND 9 REC SW2 V SS N.C. DATA CLOCK LCK OUTPUT BUFFER (Open Drain) 12BIT SHIFT REGESTER Q0 Q1 Q2 Q3 Q4 12BIT STORAGE RAGESTER CONTOROL CIRCUIT L. P. F V DD OE SO Q11 Q10 Q9 Q8 Q7 Q6 Q5 1 2 3 5 6 7 8 4 10 16 15 14 13 12 11 9 17 18 19 20

number in the exploded views are not supplied. • Items marked “*” are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. • -XX and -X mean standardized parts, so they may have some difference from the original one. • Accessories are given in the last of this parts list. • Abbreviation E3 : 240 V AC area in E model E15 : 220 – 240 V AC area in E model EA : Saudi Arabia model SP : Singapore model MY : Malaysia model Ref. No. Part No. Description Remark 6-1. MAIN SECTION Ref. No. Part No. Description Remark 1 3-363-099-32 SCREW (CASE 3 TP2) 2 4-245-184-71 CASE (SIDE-R) 3 4-245-183-71 CASE (SIDE-L) 4 4-253-803-11 DOOR, CD 5 4-244-849-71 CASE (TOP) 6 1-400-285-11 F-BEAD, E2515MRT (EXCEPT E15) 7 1-769-940-11 WIRE (FLAT TYPE) (11 CORE) 8 X-4956-294-1 SUB TRANS BOARD, COMPLETE (EXCEPT EA) 8 X-4956-322-1 SUB TRANS BOARD, COMPLETE (EA) FAN901 1-763-117-13 FAN, DC TM901 1-693-615-11 TUNER PACK (FM/AM) (ANTENNA) #1 7-685-647-79 SCREW +BVTP 3X10 TYPE2 IT-3 #2 7-685-646-79 SCREW +BVTP 3X8 TYPE2 IT-3 The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. #1 #1 #1 #1 #1 #1 #1 #1 #1 #1 #1 #1 #1 #1 #1 #2 4 3 2 1 1 1 1 5 8 chassis section not supplied 7 6 not supplied not supplied FAN901 TM901 CDM74-F1BD81 #2 not supplied not supplied front panel section not supplied (VIDEO OUT board) not supplied (PT902) #2

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 51 4-951-620-01 SCREW (2.6X8), +BVTP 52 1-796-487-61 DECK, MECHANICAL 53 4-243-608-01 BELT (BR) 54 4-243-609-01 BELT (AF) 55 4-243-610-01 BELT (AL) 56 1-769-975-11 WIRE (FLAT TYPE) (13 CORE) 57 4-245-758-01 PLATE (HEAD), SHIELD 58 A-4751-520-A MIC JACK BOARD, COMPLETE 59 4-238-628-01 MIC KNOB 60 A-4751-521-A PANEL BOARD, COMPLETE (EXCEPT EA) 60 A-4752-155-A PANEL BOARD, COMPLETE (EA) 61 1-773-048-11 WIRE (FLAT TYPE) (17 CORE) FL601 1-518-976-11 INDICATOR TUBE, FLUORESCENT #1 7-685-647-79 SCREW +BVTP 3X10 TYPE2 IT-3 #5 7-685-862-09 SCREW +BVTT 2.6X6 (S) #6 7-685-853-04 SCREW +BVTT 2X6 (S) not supplied not supplied not supplied not supplied (H/P JACK board) FL601 not supplied (REM board) 51 51 51 51 52 54 53 55 56 57 58 59 51 51 60 61 A A #6 #5 #1 #1

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 101 4-231-841-01 SPRING (HEART CAM-B) 102 4-231-825-01 CAM (B), HEART 103 4-224-104-41 DAMPER 104 4-231-824-01 CAM (A), HEART 105 4-231-836-01 SPRING (HEART CAM-A) 106 4-252-218-01 BUTTON (VIDEO/MD) not supplied not supplied not supplied 101 102 103 103 104 105 106

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 151 4-252-202-11 DOOR (B), CASS 152 4-252-201-11 DOOR (A), CASS 153 4-951-620-01 SCREW (2.6X8), +BVTP 154 4-252-214-01 KNOB, VOLUME 155 X-4956-295-1 RING ASSY, KNOB 156 4-252-198-01 WINDOW, DISPLAY 157 4-252-195-51 PANEL, FRONT 158 4-252-205-11 BUTTON, PLAY 159 4-252-207-11 BUTTON, FF/ALBUM+ 160 4-252-200-01 COVER, BUTTON 161 4-252-208-11 BUTTON, FR/ALBUM– 162 4-252-206-01 BUTTON, STOP 163 4-225-252-01 CUSHION (FOOT) not supplied not supplied not supplied not supplied 163 151 152 157 not supplied not supplied not supplied not supplied 153 153 154 155 156 161 158 159 162 160 not supplied (6 STREAM LED board) not supplied

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 201 4-242-527-01 S-SCREW, ITC+4-8 R 202 A-4751-526-A AMP BOARD, COMPLETE (EXCEPT EA) 202 A-4752-159-A AMP BOARD, COMPLETE (EA) 203 4-242-539-01 BVIT3B+3-8R W/O SLOT 204 3-905-609-41 SCREW (TRANSISTOR) (EXCEPT E15) 205 3-703-244-00 BUSHING (2104), CORD (EXCEPT E3,E15) 205 3-703-571-11 BUSHING (S) (4516), CORD (E15) * 205 3-703-571-12 BUSHING (S) (4516), CORD (E3) 0206 1-696-570-11 CORD, POWER (EA) 0206 1-777-071-83 CORD, POWER (SP,MY) 0206 1-792-381-11 CORD, POWER (E15) 0206 1-827-226-11 CORD, POWER (E3) 207 4-988-533-01 HOLDER, PWB 208 A-4751-518-A MAIN BOARD, COMPLETE 209 A-4751-524-A TRANS BOARD, COMPLETE (EXCEPT EA) 209 A-4752-157-A TRANS BOARD, COMPLETE (EA) 0F904 1-533-473-12 FUSE, GLASS TUBE (DIA.5) (T6.3AL/250V) 0F905 1-533-473-12 FUSE, GLASS TUBE (DIA.5) (T6.3AL/250V) 0F906 1-533-470-12 FUSE, GLASS TUBE (DIA.5) (T3.15AL/250V) 0F907 1-533-470-12 FUSE, GLASS TUBE (DIA.5) (T3.15AL/250V) 0F908 1-576-655-12 FUSE, GLASS TUBE (DIA.5) (T8AL/250V) 0F909 1-576-655-12 FUSE, GLASS TUBE (DIA.5) (T8AL/250V) 0PT901 1-443-255-11 TRANSFORMER, POWER (EXCEPT EA) 0PT901 1-443-281-11 TRANSFORMER, POWER (EA) #2 7-685-646-79 SCREW +BVTP 3X8 TYPE2 IT-3 #3 7-685-881-09 SCREW +BVTT 4X8 (S) #4 7-685-649-79 SCREW +BVTP 3X14 TYPE2 IT-3 not supplied not supplied 205 207 201 201 209 202 206 #2 F907 F906 F909 F904 F905 F908 PT901 #4 208 #3 204 203 203 not supplied The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified.

(CDM74-F1BD81) Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 251 4-218-253-21 SCREW (M2.6), +BTTP 252 1-776-182-11 WIRE (FLAT TYPE) (5 CORE) 253 1-687-134-12 MOTOR (TB) BOARD 254 4-243-815-01 TABLE (LOADING) 255 4-245-571-02 GEAR (STOPPER) 256 4-218-252-61 SCREW (+PTPWH M2.6), FLOATING 257 4-245-570-01 GEAR (JOINT) 258 4-245-572-01 BUSHING (GEAR) 259 1-687-132-12 SENSOR BOARD 260 4-243-820-01 GEAR (TABLE) 261 4-243-819-01 GEAR (GENEVA) 262 4-243-816-01 TRAY 263 4-243-823-01 BELT (TABLE) 264 4-985-672-01 SCREW (+PTPWH M2.6), FLOATING 265 4-243-821-01 PULLEY (TABLE) 266 3-231-598-01 SHEET (BA) M741 A-4723-963-A MOTOR ASSY, TABLE (TBL) 252 254 255 255 256 256 257 257 258 258 259 251 256 262 263 264 265 260 261 264 CD mechanism deck section-2 251 253 266 M741

(CDM74-F1BD81) Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 301 1-471-035-11 MAGNET ASSY 302 X-4955-707-2 PULLEY (A5) ASSY, CHUCKING 303 1-687-135-12 DRIVER BOARD 304 4-218-253-31 +BTTP M2.6 305 A-4751-431-A BD81A BOARD, COMPLETE 306 4-951-620-01 SCREW (2.6X8), +BVTP 307 4-244-034-01 BELT (LOADING) 308 4-218-252-61 SCREW (+PTPWH M2.6), FLOATING 309 4-225-844-01 GEAR (LOADING A) 310 1-687-669-12 SW BOARD 311 4-224-613-01 GEAR (SHAFT) 312 1-687-133-12 MOTOR (LD) BOARD 313 4-244-108-01 GEAR, SWING 314 4-224-609-01 GEAR (LOADING C) 315 4-224-608-01 COLLAR, SWING 316 3-016-533-11 WASHER (FR), STOPPER 317 4-224-611-01 GEAR (LOADING B) 318 4-224-606-01 GEAR (RV) 319 4-243-818-01 GEAR (U/D) 320 4-243-822-02 LEVER (LIFTER) 321 4-243-817-01 CHASSIS 322 4-231-189-01 PULLEY (B), CHUCKING 323 X-4955-536-1 HOLDER (213) ASSY 324 4-227-045-31 SPRING (INSULATOR), COIL 325 4-227-549-11 INSULATOR 326 4-231-151-01 STOPPER (BU) 327 4-218-253-31 +BTTP M2.6 0328 8-820-244-01 OPTICAL PICK-UP (KSM-215DCP/C2RP) 329 1-827-992-11 WIRE (FLAT TYPE) (16 CORE) 330 1-775-251-11 WIRE (FLAT TYPE) (27 CORE) 331 4-951-620-01 SCREW (2.6X8), +BVTP 332 4-985-672-01 SCREW (+PTPWH M2.6), FLOATING FC901 1-469-854-11 CORE, FERRITE (EXCEPT E15) M751 A-4736-655-A MOTOR ASSY, LOADING (LOADING) RE701 1-477-680-12 ENCODER, ROTARY S101 1-771-853-11 SWITCH, DETECTION (LIMIT) 303 304 306 304 304 310 307 308 309 311 312 313 314 315 316 317 318 319 320 322 321 323 308 332 325 324 324 326 326 326 327 327 329 331 301 302 324 324 325 328 325 325 308 308 308 308 M751 FC901 S101 RE701 330 not supplied not supplied (CONNECT board) 305 The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified.

NOTE: • Due to standardization, replacements in the parts list may be different from the parts specified in the diagrams or the components used on the set. • -XX and -X mean standardized parts, so they may have some difference from the original one. • RESISTORS All resistors are in ohms. METAL:Metal-film resistor. METAL OXIDE: Metal oxide-film resistor. F:nonflammable • Items marked “*” are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. • SEMICONDUCTORS In each case, u : µ, for example: uA.. : µA.. uPA.. : µPA.. uPB.. : µPB.. uPC.. : µPC.. uPD.. : µPD.. • CAPACITORS uF : µF • COILS uH : µH Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. When indicating parts by reference number, please include the board. A-4751-526-A AMP BOARD, COMPLETE (EXCEPT EA) A-4752-159-A AMP BOARD, COMPLETE (EA) ********************* 7-685-872-09 SCREW +BVTT 3X8 (S) < CAPACITOR > C402 1-162-306-11 CERAMIC 0.01uF 20% 16V C403 1-137-749-11 MYLAR 0.1uF 100V C404 1-137-749-11 MYLAR 0.1uF 100V C405 1-127-813-11 ELECT 3300uF 20% 71V C406 1-127-813-11 ELECT 3300uF 20% 71V C409 1-127-811-11 ELECT 3300uF 20% 50V C410 1-127-811-11 ELECT 3300uF 20% 50V C413 1-136-497-81 FILM 0.1uF 5% 50V C414 1-136-497-81 FILM 0.1uF 5% 50V C441 1-126-964-11 ELECT 10uF 20% 50V C442 1-126-964-11 ELECT 10uF 20% 50V C443 1-162-294-31 CERAMIC 0.001uF 10% 50V C444 1-162-294-31 CERAMIC 0.001uF 10% 50V C445 1-162-282-31 CERAMIC 100PF 10% 50V C446 1-162-282-31 CERAMIC 100PF 10% 50V C447 1-126-967-11 ELECT 47uF 20% 50V C448 1-126-967-11 ELECT 47uF 20% 50V C451 1-136-497-81 FILM 0.1uF 5% 50V C452 1-136-497-81 FILM 0.1uF 5% 50V C453 1-136-497-81 FILM 0.1uF 5% 50V C454 1-136-497-81 FILM 0.1uF 5% 50V C461 1-128-562-11 ELECT 47uF 20% 100V C462 1-128-562-11 ELECT 47uF 20% 100V C463 1-104-655-11 ELECT 470uF 20% 6.3V C481 1-104-658-11 ELECT 100uF 20% 10V C486 1-126-961-11 ELECT 2.2uF 20% 50V C487 1-126-963-11 ELECT 4.7uF 20% 50V C492 1-162-306-11 CERAMIC 0.01uF 20% 16V < CONNECTOR > CN441 1-778-981-21 CONNECTOR, BOARD TO BOARD 13P < DIODE > D401 6-500-360-01 DIODE D10XB20 D402 6-500-360-01 DIODE D10XB20 D441 8-719-991-33 DIODE 1SS133T-77 D442 8-719-991-33 DIODE 1SS133T-77 D443 8-719-991-33 DIODE 1SS133T-77 D444 8-719-991-33 DIODE 1SS133T-77 D445 8-719-947-65 DIODE MTZJ-T-72-16B D446 8-719-947-65 DIODE MTZJ-T-72-16B D481 8-719-991-33 DIODE 1SS133T-77 D482 8-719-991-33 DIODE 1SS133T-77 < GROUND TERMINAL BOARD > EP401 1-537-771-21 TERMINAL BOARD, GROUND EP402 1-537-771-21 TERMINAL BOARD, GROUND EP491 1-537-771-21 TERMINAL BOARD, GROUND < IC > IC441 6-600-169-01 IC STK412-240 < TERMINAL BOARD > JK441 1-694-884-11 TERMINAL BOARD (4P) (SPEAKER) < COIL > L441 1-422-009-13 COIL, AIR-CORE L442 1-422-009-13 COIL, AIR-CORE < TRANSISTOR > Q441 8-729-140-84 TRANSISTOR 2SC1841-PAFAEA Q442 8-729-140-84 TRANSISTOR 2SC1841-PAFAEA Q481 8-729-119-79 TRANSISTOR 2SC2785-FEK Q482 8-729-119-79 TRANSISTOR 2SC2785-FEK Q483 8-729-119-79 TRANSISTOR 2SC2785-FEK Q484 8-729-119-79 TRANSISTOR 2SC2785-FEK Q485 8-729-119-76 TRANSISTOR 2SA1175-HFE Q486 8-729-119-79 TRANSISTOR 2SC2785-FEK Q487 8-729-119-79 TRANSISTOR 2SC2785-FEK Q488 8-729-119-79 TRANSISTOR 2SC2785-FEK • Abbreviation E3 : 240 V AC area in E model E15 : 220 – 240 V AC area in E model EA : Saudi Arabia model SP : Singapore model MY : Malaysia model AMP

R401 1-247-879-11 CARBON 100K 5% 1/4W R402 1-247-879-11 CARBON 100K 5% 1/4W R403 1-247-879-11 CARBON 100K 5% 1/4W R404 1-247-879-11 CARBON 100K 5% 1/4W R407 1-260-316-51 CARBON 100 5% 1/2W R409 1-247-879-11 CARBON 100K 5% 1/4W R410 1-247-879-11 CARBON 100K 5% 1/4W R411 1-249-421-11 CARBON 2.2K 5% 1/4W R412 1-249-421-11 CARBON 2.2K 5% 1/4W R413 1-247-847-11 CARBON 4.7K 5% 1/4W R414 1-247-847-11 CARBON 4.7K 5% 1/4W R441 1-247-831-11 CARBON 1K 5% 1/4W R442 1-247-831-11 CARBON 1K 5% 1/4W R443 1-247-873-11 CARBON 56K 5% 1/4W R444 1-247-873-11 CARBON 56K 5% 1/4W R445 1-247-831-11 CARBON 1K 5% 1/4W R446 1-247-831-11 CARBON 1K 5% 1/4W R447 1-247-873-11 CARBON 56K 5% 1/4W R448 1-247-873-11 CARBON 56K 5% 1/4W 0R449 1-217-156-00 METAL 0.22 10% 5W F 0R450 1-217-156-00 METAL 0.22 10% 5W F R453 1-260-076-11 CARBON 10 5% 1/2W R454 1-260-076-11 CARBON 10 5% 1/2W R455 1-247-831-11 CARBON 1K 5% 1/4W R456 1-247-831-11 CARBON 1K 5% 1/4W R457 1-249-431-11 CARBON 15K 5% 1/4W R458 1-249-431-11 CARBON 15K 5% 1/4W R459 1-247-879-11 CARBON 100K 5% 1/4W R460 1-247-879-11 CARBON 100K 5% 1/4W R461 1-260-076-11 CARBON 10 5% 1/2W R462 1-260-076-11 CARBON 10 5% 1/2W R465 1-247-871-11 CARBON 47K 5% 1/4W R466 1-247-873-11 CARBON 56K 5% 1/4W 0R467 1-215-872-11 METAL OXIDE 3.3K 5% 1W F 0R468 1-215-872-11 METAL OXIDE 3.3K 5% 1W F R469 1-249-435-11 CARBON 33K 5% 1/4W R470 1-249-435-11 CARBON 33K 5% 1/4W R471 1-249-439-11 CARBON 68K 5% 1/4W R472 1-249-435-11 CARBON 33K 5% 1/4W R473 1-247-863-11 CARBON 22K 5% 1/4W R474 1-249-421-11 CARBON 2.2K 5% 1/4W R475 1-249-429-11 CARBON 10K 5% 1/4W R476 1-249-431-11 CARBON 15K 5% 1/4W 0R477 1-212-881-11 FUSIBLE 100 5% 1/4W F R478 1-249-429-11 CARBON 10K 5% 1/4W R481 1-247-847-11 CARBON 4.7K 5% 1/4W R482 1-249-429-11 CARBON 10K 5% 1/4W R483 1-247-791-11 CARBON 22 5% 1/4W R484 1-247-873-11 CARBON 56K 5% 1/4W R485 1-247-879-11 CARBON 100K 5% 1/4W R486 1-247-879-11 CARBON 100K 5% 1/4W R487 1-249-435-11 CARBON 33K 5% 1/4W R488 1-247-863-11 CARBON 22K 5% 1/4W R489 1-247-847-11 CARBON 4.7K 5% 1/4W R490 1-247-847-11 CARBON 4.7K 5% 1/4W 0R495 1-202-972-61 FUSIBLE 1 5% 1/4W F 0R496 1-212-881-11 FUSIBLE 100 5% 1/4W F < RELAY > RY441 1-755-372-11 RELAY < THERMISTOR > TH441 1-807-796-11 THERMISTOR ************************************************************* A-4751-431-A BD81A BOARD, COMPLETE ********************** < CAPACITOR > C10 1-165-989-11 CERAMIC CHIP 10uF 10% 6.3V C11 1-165-989-11 CERAMIC CHIP 10uF 10% 6.3V C14 1-164-360-11 CERAMIC CHIP 0.1uF 16V C15 1-164-360-11 CERAMIC CHIP 0.1uF 16V C16 1-115-156-11 CERAMIC CHIP 1uF 10V C17 1-126-246-11 ELECT CHIP 220uF 20% 4V C18 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V C111 1-162-967-11 CERAMIC CHIP 0.0033uF 10% 50V C112 1-164-315-11 CERAMIC CHIP 470PF 5% 50V C113 1-162-967-11 CERAMIC CHIP 0.0033uF 10% 50V C114 1-164-315-11 CERAMIC CHIP 470PF 5% 50V C115 1-164-360-11 CERAMIC CHIP 0.1uF 16V C116 1-128-995-21 ELECT CHIP 100uF 20% 10V C122 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C123 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C124 1-162-959-11 CERAMIC CHIP 330PF 5% 50V C125 1-164-360-11 CERAMIC CHIP 0.1uF 16V C131 1-162-927-11 CERAMIC CHIP 100PF 5% 50V C132 1-117-863-11 CERAMIC CHIP 0.47uF 10% 6.3V C133 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C134 1-164-360-11 CERAMIC CHIP 0.1uF 16V C141 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C142 1-162-965-11 CERAMIC CHIP 0.0015uF 10% 50V C143 1-164-360-11 CERAMIC CHIP 0.1uF 16V C151 1-128-995-21 ELECT CHIP 100uF 20% 10V C161 1-164-360-11 CERAMIC CHIP 0.1uF 16V C162 1-164-360-11 CERAMIC CHIP 0.1uF 16V C163 1-164-360-11 CERAMIC CHIP 0.1uF 16V C171 1-162-919-11 CERAMIC CHIP 22PF 5% 50V C172 1-162-920-11 CERAMIC CHIP 27PF 5% 50V C174 1-164-360-11 CERAMIC CHIP 0.1uF 16V C181 1-164-360-11 CERAMIC CHIP 0.1uF 16V C182 1-164-360-11 CERAMIC CHIP 0.1uF 16V C183 1-124-778-00 ELECT CHIP 22uF 20% 6.3V C184 1-124-778-00 ELECT CHIP 22uF 20% 6.3V C185 1-164-315-11 CERAMIC CHIP 470PF 5% 50V C186 1-164-315-11 CERAMIC CHIP 470PF 5% 50V C194 1-164-360-11 CERAMIC CHIP 0.1uF 16V C195 1-164-360-11 CERAMIC CHIP 0.1uF 16V C196 1-164-360-11 CERAMIC CHIP 0.1uF 16V C201 1-128-995-21 ELECT CHIP 100uF 20% 10V C203 1-128-995-21 ELECT CHIP 100uF 20% 10V BD81A AMP The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified.

CN101 1-770-425-11 CONNECTOR, FFC/FPC 16P CN201 1-818-350-11 CONNECTOR (FFC) 27P < FERRITE BEAD > FB301 1-500-445-21 FERRITE, EMI (SMD) (2012) < IC > IC101 8-752-425-12 IC CXD3059AR IC251 6-705-808-01 IC BA5947FM IC301 6-705-365-01 IC TC94A34FG-002 IC303 6-705-807-01 IC BH15FB1WG < TRANSISTOR > Q10 6-550-363-01 TRANSISTOR 2SB1690KT146 < RESISTOR > R10 1-216-791-11 METAL CHIP 3.3 5% 1/10W R11 1-216-864-11 SHORT CHIP 0 R12 1-216-845-11 METAL CHIP 100K 5% 1/10W R13 1-218-446-11 METAL CHIP 1 5% 1/10W R111 1-216-821-11 METAL CHIP 1K 5% 1/10W R112 1-216-835-11 METAL CHIP 15K 5% 1/10W R113 1-216-821-11 METAL CHIP 1K 5% 1/10W R114 1-216-835-11 METAL CHIP 15K 5% 1/10W R121 1-216-835-11 METAL CHIP 15K 5% 1/10W R131 1-216-857-11 METAL CHIP 1M 5% 1/10W R132 1-216-833-11 METAL CHIP 10K 5% 1/10W R133 1-216-848-11 METAL CHIP 180K 5% 1/10W R141 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R142 1-216-821-11 METAL CHIP 1K 5% 1/10W R143 1-216-827-11 METAL CHIP 3.3K 5% 1/10W R151 1-216-864-11 SHORT CHIP 0 R161 1-216-809-11 METAL CHIP 100 5% 1/10W R162 1-216-841-11 METAL CHIP 47K 5% 1/10W R163 1-216-809-11 METAL CHIP 100 5% 1/10W R165 1-216-864-11 SHORT CHIP 0 R171 1-216-817-11 METAL CHIP 470 5% 1/10W R172 1-216-857-11 METAL CHIP 1M 5% 1/10W R173 1-216-295-11 SHORT CHIP 0 R181 1-216-809-11 METAL CHIP 100 5% 1/10W R182 1-216-809-11 METAL CHIP 100 5% 1/10W R191 1-216-864-11 SHORT CHIP 0 R201 1-500-445-21 FERRITE, EMI (SMD) (2012) R203 1-216-864-11 SHORT CHIP 0 R204 1-500-445-21 FERRITE, EMI (SMD) (2012) R205 1-216-864-11 SHORT CHIP 0 R251 1-216-833-11 METAL CHIP 10K 5% 1/10W R252 1-216-837-11 METAL CHIP 22K 5% 1/10W R253 1-216-833-11 METAL CHIP 10K 5% 1/10W R301 1-216-845-11 METAL CHIP 100K 5% 1/10W R302 1-216-833-11 METAL CHIP 10K 5% 1/10W R303 1-216-845-11 METAL CHIP 100K 5% 1/10W R305 1-216-845-11 METAL CHIP 100K 5% 1/10W R306 1-216-864-11 SHORT CHIP 0 R307 1-216-833-11 METAL CHIP 10K 5% 1/10W R313 1-216-813-11 METAL CHIP 220 5% 1/10W R351 1-216-809-11 METAL CHIP 100 5% 1/10W R352 1-216-809-11 METAL CHIP 100 5% 1/10W R353 1-216-809-11 METAL CHIP 100 5% 1/10W R354 1-216-809-11 METAL CHIP 100 5% 1/10W R401 1-216-809-11 METAL CHIP 100 5% 1/10W R402 1-216-809-11 METAL CHIP 100 5% 1/10W R403 1-216-809-11 METAL CHIP 100 5% 1/10W R404 1-216-809-11 METAL CHIP 100 5% 1/10W R405 1-216-809-11 METAL CHIP 100 5% 1/10W R406 1-216-809-11 METAL CHIP 100 5% 1/10W R407 1-216-809-11 METAL CHIP 100 5% 1/10W R408 1-216-809-11 METAL CHIP 100 5% 1/10W R409 1-216-809-11 METAL CHIP 100 5% 1/10W R410 1-216-809-11 METAL CHIP 100 5% 1/10W R411 1-216-809-11 METAL CHIP 100 5% 1/10W R412 1-216-809-11 METAL CHIP 100 5% 1/10W R419 1-216-809-11 METAL CHIP 100 5% 1/10W < VIBRATOR > X171 1-767-408-21 VIBRATOR, CRYSTAL (16.9344MHz) ************************************************************* CONNECT BOARD *************** < CAPACITOR > C871 1-162-927-11 CERAMIC CHIP 100PF 5% 50V C872 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V BD81A CONNECT

CN871 1-779-295-11 CONNECTOR, FFC (LIF(NON-ZIF)) 27P CN873 1-784-778-11 CONNECTOR, FFC 17P * CN874 1-564-725-11 PIN, CONNECTOR (SMALL TYPE) 9P < JUMPER RESISTOR > FB871 1-216-864-11 SHORT CHIP 0 FB872 1-216-864-11 SHORT CHIP 0 JR871 1-216-864-11 SHORT CHIP 0 JR872 1-216-864-11 SHORT CHIP 0 ************************************************************* 1-687-135-12 DRIVER BOARD ************* < CAPACITOR > C715 1-126-933-11 ELECT 100uF 20% 16V C731 1-126-964-11 ELECT 10uF 20% 50V C735 1-164-159-21 CERAMIC 0.1uF 50V C736 1-164-159-21 CERAMIC 0.1uF 50V C737 1-164-159-21 CERAMIC 0.1uF 50V C741 1-162-306-11 CERAMIC 0.01uF 20% 16V C751 1-162-306-11 CERAMIC 0.01uF 20% 16V C752 1-164-159-21 CERAMIC 0.1uF 50V < CONNECTOR > CN701 1-785-338-11 PIN, CONNECTOR (LIGHT ANGLE) 12P CN702 1-784-766-11 CONNECTOR, FFC 5P * CN703 1-564-720-11 PIN, CONNECTOR (SMALL TYPE) 4P CN704 1-785-328-11 PIN, CONNECTOR (LIGHT ANGLE) 2P < DIODE > D701 8-719-921-42 DIODE MTZJ-5.1A D711 8-719-109-69 DIODE RD3.6ESB2 < IC > IC701 8-759-598-69 IC BA6956AN IC712 8-759-598-69 IC BA6956AN < TRANSISTOR > Q731 8-729-029-66 TRANSISTOR DTC114ESA < RESISTOR > R701 1-249-413-11 CARBON 470 5% 1/4W R702 1-247-807-31 CARBON 100 5% 1/4W R711 1-249-417-11 CARBON 1K 5% 1/4W R712 1-249-425-11 CARBON 4.7K 5% 1/4W R713 1-249-433-11 CARBON 22K 5% 1/4W R721 1-249-425-11 CARBON 4.7K 5% 1/4W R722 1-249-425-11 CARBON 4.7K 5% 1/4W R723 1-249-425-11 CARBON 4.7K 5% 1/4W R731 1-247-807-31 CARBON 100 5% 1/4W R732 1-249-429-11 CARBON 10K 5% 1/4W R733 1-249-417-11 CARBON 1K 5% 1/4W R734 1-249-430-11 CARBON 12K 5% 1/4W R735 1-247-807-31 CARBON 100 5% 1/4W R751 1-249-425-11 CARBON 4.7K 5% 1/4W ************************************************************* H/P JACK BOARD ************** < CAPACITOR > C830 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V C831 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V C832 1-164-156-11 CERAMIC CHIP 0.1uF 25V < JACK > J801 1-793-829-11 JACK, HEADPHONE (PHONES) ************************************************************* A-4751-518-A MAIN BOARD, COMPLETE ********************* 7-685-872-09 SCREW +BVTT 3X8 (S) < CAPACITOR > C101 1-126-960-11 ELECT 1uF 20% 50V C102 1-126-960-11 ELECT 1uF 20% 50V C103 1-126-956-11 ELECT 0.1uF 20% 50V C104 1-126-956-11 ELECT 0.1uF 20% 50V C105 1-164-816-11 CERAMIC CHIP 220PF 2% 50V C106 1-131-679-31 FILM 0.01uF 5% 50V C107 1-126-964-11 ELECT 10uF 20% 50V C108 1-164-816-11 CERAMIC CHIP 220PF 2% 50V C109 1-131-679-31 FILM 0.01uF 5% 50V C110 1-126-964-11 ELECT 10uF 20% 50V C111 1-126-960-11 ELECT 1uF 20% 50V C112 1-126-960-11 ELECT 1uF 20% 50V C113 1-126-960-11 ELECT 1uF 20% 50V C114 1-126-960-11 ELECT 1uF 20% 50V C115 1-131-679-31 FILM 0.01uF 5% 50V C116 1-164-392-11 CERAMIC CHIP 390PF 5% 50V C117 1-164-816-11 CERAMIC CHIP 220PF 2% 50V C118 1-126-964-11 ELECT 10uF 20% 50V C119 1-131-679-31 FILM 0.01uF 5% 50V C120 1-164-392-11 CERAMIC CHIP 390PF 5% 50V C121 1-164-816-11 CERAMIC CHIP 220PF 2% 50V C122 1-126-964-11 ELECT 10uF 20% 50V C123 1-126-965-11 ELECT 22uF 20% 50V C124 1-162-953-11 CERAMIC CHIP 100PF 5% 50V C125 1-162-953-11 CERAMIC CHIP 100PF 5% 50V C126 1-165-112-11 CERAMIC CHIP 0.33uF 16V C127 1-104-658-11 ELECT 100uF 20% 10V C128 1-104-658-11 ELECT 100uF 20% 10V C129 1-126-947-11 ELECT 47uF 20% 35V C132 1-126-947-11 ELECT 47uF 20% 35V C135 1-131-690-31 FILM 0.068uF 5% 50V C136 1-131-690-31 FILM 0.068uF 5% 50V C137 1-126-964-11 ELECT 10uF 20% 50V C138 1-126-964-11 ELECT 10uF 20% 50V C139 1-131-690-31 FILM 0.068uF 5% 50V DRIVER MAIN H/P JACK CONNECT

CN101 1-568-830-11 CONNECTOR, FFC 11P * CN103 1-564-710-11 PIN, CONNECTOR (SMALL TYPE) 8P * CN112 1-564-705-11 PIN, CONNECTOR (SMALL TYPE) 3P CN302 1-568-844-11 CONNECTOR, FFC 29P * CN304 1-564-709-11 PIN, CONNECTOR (SMALL TYPE) 7P CN307 1-778-982-21 CONNECTOR, BOARD TO BOARD 13P CN308 1-564-506-11 PLUG, CONNECTOR 3P CN309 1-564-707-11 PIN, CONNECTOR (SMALL TYPE) 5P < DIODE > D201 8-719-988-61 DIODE 1SS355TE-17 D202 8-719-083-63 DIODE UDZSTE-1713B MAIN

EP101 1-537-771-21 TERMINAL BOARD, GROUND EP301 1-537-771-21 TERMINAL BOARD, GROUND < JUMPER RESISTOR > FB201 1-216-864-11 SHORT CHIP 0 FB202 1-216-864-11 SHORT CHIP 0 FB203 1-216-864-11 SHORT CHIP 0 FB204 1-216-864-11 SHORT CHIP 0 FB205 1-216-864-11 SHORT CHIP 0 < IC > IC101 6-705-852-01 IC BD3401KS2 IC102 8-759-710-97 IC NJM4565M-D IC201 8-759-508-69 IC BA3126N IC301 6-702-771-01 IC TA78033LS IC302 6-702-771-01 IC TA78033LS IC303 8-759-701-59 IC NJM78M09FA IC304 8-759-701-59 IC NJM78M09FA IC371 6-704-046-01 IC BU2099FV < JACK > JK101 1-793-987-11 JACK, PIN 2P (VIDEO/MD IN) < TRANSFORMER > L101 1-437-220-11 TRANSFORMER, BIAS OSCILLATION < TRANSISTOR > Q101 8-729-120-28 TRANSISTOR 2SC1623-L5L6 Q102 6-550-580-01 TRANSISTOR 2SA1235TP-1F Q103 6-550-889-01 TRANSISTOR 2SC5938-T112-1B Q104 6-550-889-01 TRANSISTOR 2SC5938-T112-1B Q105 8-729-120-28 TRANSISTOR 2SC1623-L5L6 Q106 8-729-120-28 TRANSISTOR 2SC1623-L5L6 Q107 8-729-120-28 TRANSISTOR 2SC1623-L5L6 Q304 8-729-120-28 TRANSISTOR 2SC1623-L5L6 Q305 6-550-580-01 TRANSISTOR 2SA1235TP-1F Q306 6-550-889-01 TRANSISTOR 2SC5938-T112-1B Q307 6-550-889-01 TRANSISTOR 2SC5938-T112-1B Q308 6-550-580-01 TRANSISTOR 2SA1235TP-1F Q309 8-729-120-28 TRANSISTOR 2SC1623-L5L6 Q310 8-729-142-46 TRANSISTOR 2SC2001-LK Q311 8-729-142-46 TRANSISTOR 2SC2001-LK Q312 8-729-041-19 TRANSISTOR 2SA953-T-K Q313 8-729-120-28 TRANSISTOR 2SC1623-L5L6 Q314 6-550-580-01 TRANSISTOR 2SA1235TP-1F Q315 8-729-120-28 TRANSISTOR 2SC1623-L5L6 Q321 8-729-142-46 TRANSISTOR 2SC2001-LK Q322 6-550-580-01 TRANSISTOR 2SA1235TP-1F Q323 8-729-120-28 TRANSISTOR 2SC1623-L5L6 Q324 8-729-140-04 TRANSISTOR 2SB1116A-L Q327 8-729-120-28 TRANSISTOR 2SC1623-L5L6 Q351 8-729-120-28 TRANSISTOR 2SC1623-L5L6 Q352 8-729-120-28 TRANSISTOR 2SC1623-L5L6 Q361 6-550-580-01 TRANSISTOR 2SA1235TP-1F Q362 8-729-120-28 TRANSISTOR 2SC1623-L5L6 Q372 8-729-120-28 TRANSISTOR 2SC1623-L5L6 < RESISTOR > R101 1-216-833-11 METAL CHIP 10K 5% 1/10W R102 1-216-833-11 METAL CHIP 10K 5% 1/10W R103 1-216-851-11 METAL CHIP 330K 5% 1/10W R104 1-216-835-11 METAL CHIP 15K 5% 1/10W R105 1-216-816-11 METAL CHIP 390 5% 1/10W R106 1-216-851-11 METAL CHIP 330K 5% 1/10W R107 1-216-835-11 METAL CHIP 15K 5% 1/10W R108 1-216-816-11 METAL CHIP 390 5% 1/10W R109 1-216-853-11 METAL CHIP 470K 5% 1/10W R110 1-216-851-11 METAL CHIP 330K 5% 1/10W R111 1-216-844-11 METAL CHIP 82K 5% 1/10W R112 1-216-853-11 METAL CHIP 470K 5% 1/10W R113 1-216-851-11 METAL CHIP 330K 5% 1/10W R114 1-216-844-11 METAL CHIP 82K 5% 1/10W R115 1-216-857-11 METAL CHIP 1M 5% 1/10W R116 1-216-809-11 METAL CHIP 100 5% 1/10W R117 1-216-809-11 METAL CHIP 100 5% 1/10W R119 1-216-841-11 METAL CHIP 47K 5% 1/10W R120 1-216-857-11 METAL CHIP 1M 5% 1/10W R121 1-216-841-11 METAL CHIP 47K 5% 1/10W R127 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R128 1-216-835-11 METAL CHIP 15K 5% 1/10W R129 1-216-841-11 METAL CHIP 47K 5% 1/10W R131 1-216-835-11 METAL CHIP 15K 5% 1/10W R132 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R133 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R134 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R135 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R136 1-216-829-11 METAL CHIP 4.7K 5% 1/10W MAIN

mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified.

************************* < CAPACITOR > C811 1-124-464-11 ELECT 0.22uF 20% 50V C812 1-124-463-00 ELECT 0.1uF 20% 50V C813 1-126-157-11 ELECT 10uF 20% 16V C814 1-126-157-11 ELECT 10uF 20% 16V C815 1-124-257-00 ELECT 2.2uF 20% 50V C816 1-124-257-00 ELECT 2.2uF 20% 50V C817 1-124-584-00 ELECT 100uF 20% 10V C818 1-124-584-00 ELECT 100uF 20% 10V C819 1-162-927-11 CERAMIC CHIP 100PF 5% 50V C820 1-162-923-11 CERAMIC CHIP 47PF 5% 50V C821 1-164-156-11 CERAMIC CHIP 0.1uF 25V C822 1-164-315-11 CERAMIC CHIP 470PF 5% 50V C823 1-115-416-11 CERAMIC CHIP 0.001uF 5% 25V C824 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C825 1-164-816-11 CERAMIC CHIP 220PF 2% 50V C827 1-164-315-11 CERAMIC CHIP 470PF 5% 50V C828 1-164-315-11 CERAMIC CHIP 470PF 5% 50V C829 1-126-157-11 ELECT 10uF 20% 16V C831 1-165-112-11 CERAMIC CHIP 0.33uF 16V C855 1-165-112-11 CERAMIC CHIP 0.33uF 16V C860 1-165-112-11 CERAMIC CHIP 0.33uF 16V < IC > IC801 8-759-710-97 IC NJM4565M-D < JACK > J805 1-764-592-11 JACK 3P (GAME INPUT) JK802 1-770-226-11 JACK (LARGE TYPE) (MIC) < JUMPER RESISTOR > JR805 1-216-864-11 SHORT CHIP 0 JR806 1-216-864-11 SHORT CHIP 0 < TRANSISTOR > Q801 8-729-120-28 TRANSISTOR 2SC1623-L5L6 Q802 8-729-120-28 TRANSISTOR 2SC1623-L5L6 < RESISTOR > R805 1-216-833-11 METAL CHIP 10K 5% 1/10W R806 1-216-833-11 METAL CHIP 10K 5% 1/10W R807 1-216-833-11 METAL CHIP 10K 5% 1/10W R808 1-216-845-11 METAL CHIP 100K 5% 1/10W R809 1-216-821-11 METAL CHIP 1K 5% 1/10W R810 1-216-837-11 METAL CHIP 22K 5% 1/10W R811 1-216-809-11 METAL CHIP 100 5% 1/10W R812 1-216-845-11 METAL CHIP 100K 5% 1/10W R813 1-216-809-11 METAL CHIP 100 5% 1/10W R814 1-216-849-11 METAL CHIP 220K 5% 1/10W R815 1-216-833-11 METAL CHIP 10K 5% 1/10W R816 1-216-833-11 METAL CHIP 10K 5% 1/10W R817 1-216-821-11 METAL CHIP 1K 5% 1/10W R818 1-216-834-11 METAL CHIP 12K 5% 1/10W R819 1-216-837-11 METAL CHIP 22K 5% 1/10W R820 1-216-837-11 METAL CHIP 22K 5% 1/10W R821 1-216-821-11 METAL CHIP 1K 5% 1/10W R830 1-216-833-11 METAL CHIP 10K 5% 1/10W R831 1-216-833-11 METAL CHIP 10K 5% 1/10W R832 1-216-821-11 METAL CHIP 1K 5% 1/10W < VARIABLE RESISTOR > VR801 1-223-983-11 RES, VAR, CARBON 50K (MIC LEVEL) ************************************************************* 1-687-133-12 MOTOR (LD) BOARD ***************** ************************************************************* MOTOR (LD) MAIN MIC JACK

***************** < CONNECTOR > CN742 1-784-727-11 CONNECTOR, FFC 5P ************************************************************* A-4751-521-A PANEL BOARD, COMPLETE (EXCEPT EA) A-4752-155-A PANEL BOARD, COMPLETE (EA) ********************** < CAPACITOR > C601 1-162-919-11 CERAMIC CHIP 22PF 5% 50V C602 1-162-919-11 CERAMIC CHIP 22PF 5% 50V C603 1-162-919-11 CERAMIC CHIP 22PF 5% 50V C604 1-164-156-11 CERAMIC CHIP 0.1uF 25V C605 1-126-163-11 ELECT 4.7uF 20% 50V C606 1-115-156-11 CERAMIC CHIP 1uF 10V C607 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V C608 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C609 1-115-156-11 CERAMIC CHIP 1uF 10V C610 1-126-916-11 ELECT 1000uF 20% 6.3V C611 1-164-156-11 CERAMIC CHIP 0.1uF 25V C612 1-126-157-11 ELECT 10uF 20% 16V C613 1-164-156-11 CERAMIC CHIP 0.1uF 25V C614 1-164-156-11 CERAMIC CHIP 0.1uF 25V C615 1-124-257-00 ELECT 2.2uF 20% 50V C617 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V C618 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V C619 1-124-589-11 ELECT 47uF 20% 16V C620 1-119-772-11 ELECT 47uF 20% 35V C621 1-162-995-11 CERAMIC CHIP 0.022uF 50V C622 1-126-163-11 ELECT 4.7uF 20% 50V C623 1-126-163-11 ELECT 4.7uF 20% 50V C624 1-162-918-11 CERAMIC CHIP 18PF 5% 50V C625 1-162-919-11 CERAMIC CHIP 22PF 5% 50V C626 1-164-156-11 CERAMIC CHIP 0.1uF 25V C628 1-162-927-11 CERAMIC CHIP 100PF 5% 50V C629 1-162-927-11 CERAMIC CHIP 100PF 5% 50V C630 1-162-927-11 CERAMIC CHIP 100PF 5% 50V C631 1-162-927-11 CERAMIC CHIP 100PF 5% 50V C632 1-162-927-11 CERAMIC CHIP 100PF 5% 50V C633 1-162-927-11 CERAMIC CHIP 100PF 5% 50V C634 1-162-927-11 CERAMIC CHIP 100PF 5% 50V C635 1-162-927-11 CERAMIC CHIP 100PF 5% 50V C636 1-162-927-11 CERAMIC CHIP 100PF 5% 50V C637 1-162-927-11 CERAMIC CHIP 100PF 5% 50V C638 1-162-927-11 CERAMIC CHIP 100PF 5% 50V C639 1-162-927-11 CERAMIC CHIP 100PF 5% 50V C640 1-162-927-11 CERAMIC CHIP 100PF 5% 50V C641 1-164-156-11 CERAMIC CHIP 0.1uF 25V C642 1-164-156-11 CERAMIC CHIP 0.1uF 25V C643 1-164-156-11 CERAMIC CHIP 0.1uF 25V C644 1-126-157-11 ELECT 10uF 20% 16V C646 1-124-234-00 ELECT 22uF 20% 16V C647 1-124-589-11 ELECT 47uF 20% 16V C648 1-124-234-00 ELECT 22uF 20% 16V C649 1-164-156-11 CERAMIC CHIP 0.1uF 25V C653 1-162-959-11 CERAMIC CHIP 330PF 5% 50V C654 1-164-156-11 CERAMIC CHIP 0.1uF 25V C655 1-164-156-11 CERAMIC CHIP 0.1uF 25V C656 1-162-927-11 CERAMIC CHIP 100PF 5% 50V < CONNECTOR > CN601 1-784-751-11 CONNECTOR, FFC 29P CN602 1-784-774-11 CONNECTOR, FFC 13P CN603 1-784-778-11 CONNECTOR, FFC 17P * CN604 1-564-708-11 PIN, CONNECTOR (SMALL TYPE) 6P CN605 1-564-707-11 PIN, CONNECTOR (SMALL TYPE) 5P CN608 1-818-282-11 PIN, CONNECTOR 3P < DIODE > D603 8-719-988-61 DIODE 1SS355TE-17 D604 8-719-988-61 DIODE 1SS355TE-17 D605 8-719-988-61 DIODE 1SS355TE-17 * D606 6-500-486-01 DIODE PTZ-TE25-11B D607 8-719-988-61 DIODE 1SS355TE-17 D608 8-719-988-61 DIODE 1SS355TE-17 D609 8-719-988-61 DIODE 1SS355TE-17 D610 8-719-056-78 DIODE UDZ-TE-17-4.3B D611 8-719-988-61 DIODE 1SS355TE-17 D613 8-719-988-61 DIODE 1SS355TE-17 D614 8-719-988-61 DIODE 1SS355TE-17 D615 8-719-988-61 DIODE 1SS355TE-17 D616 8-719-988-61 DIODE 1SS355TE-17 D622 8-719-988-61 DIODE 1SS355TE-17 (EA) D624 8-719-988-61 DIODE 1SS355TE-17 D627 8-719-988-61 DIODE 1SS355TE-17 D630 8-719-988-61 DIODE 1SS355TE-17 D631 8-719-978-33 DIODE DTZ-TT11-6.8B D632 8-719-083-57 DIODE UDZSTE-173.6B D633 8-719-988-61 DIODE 1SS355TE-17 < FLUORESCENT INDICATOR > FL601 1-518-976-11 INDICATOR TUBE, FLUORESCENT < IC > IC601 6-804-440-01 IC LC876996A-53H2-E IC602 6-704-046-01 IC BU2099FV IC603 6-704-045-01 IC MM1574ANLE IC604 8-759-533-04 IC M62703ML-E1 < JUMPER RESISTOR > JR607 1-216-864-11 SHORT CHIP 0 JR608 1-216-864-11 SHORT CHIP 0 JR609 1-216-864-11 SHORT CHIP 0 JR611 1-216-864-11 SHORT CHIP 0 JR612 1-216-864-11 SHORT CHIP 0 JR614 1-216-864-11 SHORT CHIP 0 JR617 1-216-864-11 SHORT CHIP 0 JR621 1-216-864-11 SHORT CHIP 0 JR622 1-216-864-11 SHORT CHIP 0 JR623 1-216-864-11 SHORT CHIP 0 < DIODE > LED601 6-500-809-01 LED SELU5223C-STP15 (?/1) PANEL MOTOR (TB)

Q601 8-729-116-57 TRANSISTOR 2SB1068-K Q602 8-729-140-04 TRANSISTOR 2SB1116A-L Q603 8-729-140-04 TRANSISTOR 2SB1116A-L Q604 8-729-119-76 TRANSISTOR 2SA1175-HFE Q605 8-729-120-28 TRANSISTOR 2SC1623-L5L6 Q610 8-729-027-55 TRANSISTOR DTC143EKA-T146 Q611 8-729-027-55 TRANSISTOR DTC143EKA-T146 Q612 8-729-027-55 TRANSISTOR DTC143EKA-T146 Q613 8-729-027-55 TRANSISTOR DTC143EKA-T146 Q614 8-729-027-55 TRANSISTOR DTC143EKA-T146 Q615 8-729-027-55 TRANSISTOR DTC143EKA-T146 Q616 8-729-027-55 TRANSISTOR DTC143EKA-T146 < RESISTOR > R601 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R602 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R603 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R604 1-216-841-11 METAL CHIP 47K 5% 1/10W R605 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R606 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R607 1-216-841-11 METAL CHIP 47K 5% 1/10W R608 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R609 1-216-837-11 METAL CHIP 22K 5% 1/10W R610 1-216-833-11 METAL CHIP 10K 5% 1/10W R611 1-216-837-11 METAL CHIP 22K 5% 1/10W R612 1-216-833-11 METAL CHIP 10K 5% 1/10W R613 1-216-837-11 METAL CHIP 22K 5% 1/10W R614 1-216-837-11 METAL CHIP 22K 5% 1/10W R615 1-216-837-11 METAL CHIP 22K 5% 1/10W R616 1-216-833-11 METAL CHIP 10K 5% 1/10W R617 1-216-837-11 METAL CHIP 22K 5% 1/10W R618 1-216-833-11 METAL CHIP 10K 5% 1/10W R619 1-216-837-11 METAL CHIP 22K 5% 1/10W R620 1-216-837-11 METAL CHIP 22K 5% 1/10W R621 1-216-833-11 METAL CHIP 10K 5% 1/10W R622 1-216-049-11 RES-CHIP 1K 5% 1/10W R623 1-216-833-11 METAL CHIP 10K 5% 1/10W R624 1-216-049-11 RES-CHIP 1K 5% 1/10W R625 1-216-833-11 METAL CHIP 10K 5% 1/10W R626 1-216-049-11 RES-CHIP 1K 5% 1/10W R627 1-216-833-11 METAL CHIP 10K 5% 1/10W R628 1-216-833-11 METAL CHIP 10K 5% 1/10W R629 1-216-150-11 RES-CHIP 10 5% 1/8W R632 1-216-809-11 METAL CHIP 100 5% 1/10W R633 1-216-809-11 METAL CHIP 100 5% 1/10W R634 1-216-809-11 METAL CHIP 100 5% 1/10W R635 1-216-809-11 METAL CHIP 100 5% 1/10W R636 1-216-833-11 METAL CHIP 10K 5% 1/10W R637 1-216-833-11 METAL CHIP 10K 5% 1/10W R638 1-216-809-11 METAL CHIP 100 5% 1/10W R639 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R640 1-216-834-11 METAL CHIP 12K 5% 1/10W R641 1-216-849-11 METAL CHIP 220K 5% 1/10W R642 1-216-817-11 METAL CHIP 470 5% 1/10W R643 1-216-819-11 METAL CHIP 680 5% 1/10W R644 1-216-821-11 METAL CHIP 1K 5% 1/10W R645 1-216-823-11 METAL CHIP 1.5K 5% 1/10W R646 1-216-823-11 METAL CHIP 1.5K 5% 1/10W R647 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R648 1-216-827-11 METAL CHIP 3.3K 5% 1/10W R649 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R650 1-218-867-11 METAL CHIP 6.8K 0.5% 1/10W R651 1-216-833-11 METAL CHIP 10K 5% 1/10W R652 1-216-835-11 METAL CHIP 15K 5% 1/10W R653 1-216-817-11 METAL CHIP 470 5% 1/10W R654 1-216-819-11 METAL CHIP 680 5% 1/10W R655 1-216-821-11 METAL CHIP 1K 5% 1/10W R656 1-216-823-11 METAL CHIP 1.5K 5% 1/10W R657 1-216-823-11 METAL CHIP 1.5K 5% 1/10W R658 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R659 1-216-827-11 METAL CHIP 3.3K 5% 1/10W R660 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R661 1-218-867-11 METAL CHIP 6.8K 0.5% 1/10W R662 1-216-833-11 METAL CHIP 10K 5% 1/10W R663 1-216-837-11 METAL CHIP 22K 5% 1/10W R664 1-216-817-11 METAL CHIP 470 5% 1/10W R665 1-216-819-11 METAL CHIP 680 5% 1/10W R666 1-216-821-11 METAL CHIP 1K 5% 1/10W R667 1-216-823-11 METAL CHIP 1.5K 5% 1/10W R668 1-216-823-11 METAL CHIP 1.5K 5% 1/10W R669 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R670 1-216-827-11 METAL CHIP 3.3K 5% 1/10W R671 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R672 1-216-833-11 METAL CHIP 10K 5% 1/10W R674 1-216-835-11 METAL CHIP 15K 5% 1/10W R675 1-216-835-11 METAL CHIP 15K 5% 1/10W R676 1-216-835-11 METAL CHIP 15K 5% 1/10W R677 1-216-864-11 SHORT CHIP 0 R678 1-216-845-11 METAL CHIP 100K 5% 1/10W R679 1-216-172-00 RES-CHIP 82 5% 1/8W R680 1-216-838-11 METAL CHIP 27K 5% 1/10W R681 1-216-849-11 METAL CHIP 220K 5% 1/10W R682 1-216-833-11 METAL CHIP 10K 5% 1/10W R683 1-216-849-11 METAL CHIP 220K 5% 1/10W R684 1-216-821-11 METAL CHIP 1K 5% 1/10W R685 1-216-841-11 METAL CHIP 47K 5% 1/10W R686 1-216-841-11 METAL CHIP 47K 5% 1/10W R687 1-216-833-11 METAL CHIP 10K 5% 1/10W R688 1-216-817-11 METAL CHIP 470 5% 1/10W R689 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R690 1-216-809-11 METAL CHIP 100 5% 1/10W R691 1-216-809-11 METAL CHIP 100 5% 1/10W R692 1-216-809-11 METAL CHIP 100 5% 1/10W R693 1-216-809-11 METAL CHIP 100 5% 1/10W R694 1-216-809-11 METAL CHIP 100 5% 1/10W R695 1-216-809-11 METAL CHIP 100 5% 1/10W R696 1-216-809-11 METAL CHIP 100 5% 1/10W R697 1-216-809-11 METAL CHIP 100 5% 1/10W R698 1-216-182-00 RES-CHIP 220 5% 1/8W R700 1-216-182-00 RES-CHIP 220 5% 1/8W R702 1-216-182-00 RES-CHIP 220 5% 1/8W R704 1-216-182-00 RES-CHIP 220 5% 1/8W R706 1-216-182-00 RES-CHIP 220 5% 1/8W R708 1-216-182-00 RES-CHIP 220 5% 1/8W PANEL

S601 1-762-875-21 SWITCH, KEYBOARD (?/1) S602 1-762-875-21 SWITCH, KEYBOARD (DISPLAY) S603 1-762-875-21 SWITCH, KEYBOARD (EQ BAND) S604 1-762-875-21 SWITCH, KEYBOARD (DISC 1) S605 1-762-875-21 SWITCH, KEYBOARD (DISC 2) S606 1-762-875-21 SWITCH, KEYBOARD (DISC 3) S607 1-762-875-21 SWITCH, KEYBOARD (DISC SKIP/EX-CHANGE) S608 1-762-875-21 SWITCH, KEYBOARD (Z) S610 1-762-875-21 SWITCH, KEYBOARD (P FILE) S611 1-762-875-21 SWITCH, KEYBOARD (PRESET EQ) S612 1-762-875-21 SWITCH, KEYBOARD (ENTER) S621 1-762-875-21 SWITCH, KEYBOARD (CD) S622 1-762-875-21 SWITCH, KEYBOARD (TUNER/BAND) S623 1-762-875-21 SWITCH, KEYBOARD (TAPE A/B) S624 1-762-875-21 SWITCH, KEYBOARD (GAME) S625 1-762-875-21 SWITCH, KEYBOARD (WIRELESS) S626 1-762-875-21 SWITCH, KEYBOARD (ILLUMINATION) S627 1-762-875-21 SWITCH, KEYBOARD (PLAY MODE/TUNER MODE) S628 1-762-875-21 SWITCH, KEYBOARD (GAME MIXING) S629 1-762-875-21 SWITCH, KEYBOARD (CD SYNC) S630 1-762-875-21 SWITCH, KEYBOARD (REC PAUSE/START) S641 1-762-875-21 SWITCH, KEYBOARD (GROOVE) S642 1-762-875-21 SWITCH, KEYBOARD (SURROUND) S643 1-762-875-21 SWITCH, KEYBOARD (EFFECT ON/OFF) PANEL

S645 1-762-875-21 SWITCH, KEYBOARD (G/g) S646 1-762-875-21 SWITCH, KEYBOARD (M ALBUM +) S647 1-762-875-21 SWITCH, KEYBOARD (m ALBUM –) S648 1-762-875-21 SWITCH, KEYBOARD (X) S649 1-762-875-21 SWITCH, KEYBOARD (x) S650 1-762-875-21 SWITCH, KEYBOARD (TUNING –) < VIBRATOR > X601 1-760-252-12 VIBRATOR, CRYSTAL (32.768kHz) X602 1-795-004-21 VIBRATOR, CERAMIC (10MHz) ************************************************************* REM BOARD *********** < CONNECTOR > CN610 1-816-423-11 SOCKET, CONNECTOR 3P < IC > IC610 6-600-174-01 IC RPM7240-H4 (IR) < JUMPER RESISTOR > JR624 1-216-296-11 SHORT CHIP 0 ************************************************************* 1-687-132-12 SENSOR BOARD ************** < CONNECTOR > CN731 1-785-329-21 PIN, CONNECTOR (LIGHT ANGLE) 3P < IC > IC731 6-600-022-01 IC RPI-576 ************************************************************* X-4956-294-1 SUB TRANS BOARD, COMPLETE (EXCEPT EA) X-4956-322-1 SUB TRANS BOARD, COMPLETE (EA) ************************** < CAPACITOR > C905 1-126-942-61 ELECT 1000uF 20% 25V (EA) < CONNECTOR > CN901 1-564-321-00 PIN, CONNECTOR (3.96mm PITCH) 2P < DIODE > D901 8-719-991-33 DIODE 1SS133T-77 D902 6-500-522-21 DIODE 10EDB40-TB3 D903 6-500-522-21 DIODE 10EDB40-TB3 D904 6-500-522-21 DIODE 10EDB40-TB3 D905 6-500-522-21 DIODE 10EDB40-TB3 < RELAY > 0RY901 1-755-276-11 RELAY, POWER < SWITCH > 0S901 1-786-055-21 SELECTOR, VOLTAGE (VOLTAGE SELECTOR) ************************************************************* 1-687-669-12 SW BOARD ********** < SWITCH > S751 1-786-514-11 SWITCH, LEVER (SLIDE) (OPEN) ************************************************************* A-4751-524-A TRANS BOARD, COMPLETE (EXCEPT EA) A-4752-157-A TRANS BOARD, COMPLETE (EA) ********************** 1-533-233-11 HOLDER, FUSE < CAPACITOR > C906 1-164-159-11 CERAMIC 0.1uF 50V C908 1-128-553-11 ELECT 220uF 20% 63V C909 1-126-964-11 ELECT 10uF 20% 50V C910 1-126-968-11 ELECT 100uF 20% 50V C911 1-126-942-61 ELECT 1000uF 20% 25V C920 1-131-679-31 FILM 0.01uF 5% 50V C921 1-131-679-31 FILM 0.01uF 5% 50V C922 1-131-679-31 FILM 0.01uF 5% 50V C923 1-131-679-31 FILM 0.01uF 5% 50V C924 1-136-165-00 FILM 0.1uF 5% 50V C925 1-136-165-00 FILM 0.1uF 5% 50V C926 1-164-159-11 CERAMIC 0.1uF 50V < CONNECTOR > CN904 1-568-106-11 PIN, CONNECTOR (3.96mm PITCH) 4P * CN905 1-564-508-11 PLUG, CONNECTOR 5P * CN906 1-564-705-11 PIN, CONNECTOR (SMALL TYPE) 3P * CN907 1-764-333-11 PLUG, CONNECTOR 10P < DIODE > D906 8-719-983-79 DIODE MTZJ-T-72-27D D908 6-500-522-21 DIODE 10EDB40-TB3 < TRANSISTOR > Q902 8-729-048-52 TRANSISTOR 2SA1932(TP) < RESISTOR > R903 1-249-430-11 CARBON 12K 5% 1/4W R904 1-247-831-11 CARBON 1K 5% 1/4W 0R908 1-202-972-61 FUSIBLE 1 5% 1/4W F ************************************************************* PANEL SENSOR SUB TRANS SW TRANS REM The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified.

**************** < CONNECTOR > * CN805 1-564-704-11 PIN, CONNECTOR (SMALL TYPE) 2P < JACK > J803 1-774-227-11 JACK, PIN 1P (VIDEO OUT) ************************************************************* 6 STREAM LED BOARD ******************* < DIODE > LED610 6-500-809-01 LED SELU5223C-STP15 (ILLUMINATION) LED611 6-500-809-01 LED SELU5223C-STP15 (ILLUMINATION) LED612 6-500-809-01 LED SELU5223C-STP15 (ILLUMINATION) LED613 6-500-809-01 LED SELU5223C-STP15 (ILLUMINATION) LED614 6-500-809-01 LED SELU5223C-STP15 (ILLUMINATION) LED615 6-500-809-01 LED SELU5223C-STP15 (ILLUMINATION) < RESISTOR > R673 1-216-837-11 METAL CHIP 22K 5% 1/10W R699 1-216-182-00 RES-CHIP 220 5% 1/8W R701 1-216-182-00 RES-CHIP 220 5% 1/8W R703 1-216-182-00 RES-CHIP 220 5% 1/8W R705 1-216-182-00 RES-CHIP 220 5% 1/8W R707 1-216-182-00 RES-CHIP 220 5% 1/8W R709 1-216-182-00 RES-CHIP 220 5% 1/8W < ROTARY ENCODER > S660 1-418-632-11 ENCODER, ROTARY (MASTER VOLUME) < SWITCH > SW601 1-786-289-11 SWITCH, DETECTION (l – EQ + L) ************************************************************* MISCELLANEOUS *************** 6 1-400-285-11 F-BEAD, E2515MRT (EXCEPT E15) 7 1-769-940-11 WIRE (FLAT TYPE) (11 CORE) 52 1-796-487-61 DECK, MECHANICAL 56 1-769-975-11 WIRE (FLAT TYPE) (13 CORE) 61 1-773-048-11 WIRE (FLAT TYPE) (17 CORE) 0206 1-696-570-11 CORD, POWER (EA) 0206 1-696-848-12 CORD, POWER (AUS) 0206 1-777-071-83 CORD, POWER (SP,MY) 0206 1-792-381-11 CORD, POWER (E15) 0206 1-827-226-11 CORD, POWER (E3) 252 1-776-182-11 WIRE (FLAT TYPE) (5 CORE) 301 1-471-035-11 MAGNET ASSY 0328 8-820-244-01 OPTICAL PICK-UP (KSM-215DCP/C2RP) 329 1-827-992-11 WIRE (FLAT TYPE) (16 CORE) 330 1-775-251-11 WIRE (FLAT TYPE) (27 CORE) 0F904 1-533-473-12 FUSE, GLASS TUBE (DIA.5) (T6.3AL/250V) 0F905 1-533-473-12 FUSE, GLASS TUBE (DIA.5) (T6.3AL/250V) 0F906 1-533-470-12 FUSE, GLASS TUBE (DIA.5) (T3.15AL/250V) 0F907 1-533-470-12 FUSE, GLASS TUBE (DIA.5) (T3.15AL/250V) 0F908 1-576-655-12 FUSE, GLASS TUBE (DIA.5) (T8AL/250V) 0F909 1-576-655-12 FUSE, GLASS TUBE (DIA.5) (T8AL/250V) FAN901 1-763-117-13 FAN, DC FC901 1-469-854-11 CORE, FERRITE (EXCEPT E15) M741 A-4723-963-A MOTOR ASSY, TABLE (TBL) M751 A-4736-655-A MOTOR ASSY, LOADING (LOADING) 0PT901 1-443-255-11 TRANSFORMER, POWER (EXCEPT EA) 0PT901 1-443-281-11 TRANSFORMER, POWER (EA) RE701 1-477-680-12 ENCODER, ROTARY S101 1-771-853-11 SWITCH, DETECTION (LIMIT) TM901 1-693-615-11 TUNER PACK (FM/AM) (ANTENNA) Ref. No. Part No. Description Remark The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. 6 STREAM LED VIDEO OUT

Also, clicking the version at the upper on the revised page allows you to jump to the next revised page. Ver. Date Description of Revision 1.0 2004. 04 New