Rimage Desktop 2000i Setup And Installation

computer technician for help or refer to your computer documentation. Before you begin: • You must have administrative privileges to install the OfficeNet software on your computer. • If you have the Rimage 2000i Software installed on your PC, you must uninstall it before you install OfficeNet. For more information, refer to the Uninstall the Rimage 2000i Software section of this document. • Do not plug in any cables until you are instructed to do so. • Obtain a computer that meets the computer specifications listed in the ‘Learn more’ section of your Rimage 2000i User Guide. Setup and Installation for Windows® Using OfficeNet Software Suite™ Rimage 2000i™ 2 Connect the Rimage 2000i power cable. a. Connect the power cord from the Rimage 2000i to a power outlet. Set up the Rimage 2000i. 1 a. On the Rimage 2000i, install the bin assembly. b. On the bin assembly, flip the diverter tray from the right to the left. Important! Do not connect the USB cable from the Rimage 2000i to your computer until until the software instructs you to do so!  b. Press the power switch to power on the Rimage 2000i. Uninstall the Rimage 2000i Software If you have the Rimage 2000i Software installed on your PC, you must uninstall it before you install OfficeNet. Use the procedure below to uninstall the Rimage 2000i Software. Before you begin: 1. Stop all jobs in progress. 2. Close all applications. 3. Power off the Rimage system. 4. Disconnect all cable connections from the Rimage system to the PC. Uninstall the Rimage 2000i Software 1. At the PC where the Rimage 2000i Software is installed, navigate to the Control Panel. In Windows 2000 Professional – Navigate: Start > Settings > Control Panel. The Control Panel window opens. In Windows XP Professional – Navigate: Start > Control Panel. The Control Panel window opens. 2. Uninstall the Rimage 2000i Software. a. In the Control Panel window, select Add or Remove programs. The Add or Remove Programs window opens. b. From the Currently installed programs list, select the Rimage 2000i Software. c. Select Remove. d. Select Next. e. Follow the onscreen prompts to remove the Rimage 2000i Software. 3. Select Yes, I want to restart my computer now. The PC restarts. 4. When the PC has started, delete the following folders: Important! Ensure that there are no files saved to these folders before you delete them. • C:\Rimage • C:\Program files\Rimage Diverter tray

a. Lift the access door. The ink cartridge cradles move to the right side of the printer. b. When the ink cartridge cradles are still, lift both cartridge latches. c. Slide the matching ink cartidges into the cradles as shown. d. Close each cartridge latch. e. Close the access door. The printer initializes. f. Align the Rimage 2000i ink cartridges. For specific instructions, refer to the Rimage 2000i User Guide included with your product. 4 Install the Rimage 2000i printer driver and connect the USB 2.0 cable. 3 Install the Rimage software. Important! You must have administrative privileges to install the Rimage 2000i software on your computer.  a. Power on the PC. b. Insert the software disc in the PC disc drive. c. Follow the prompts to continue the installation. d. When prompted to select a printer, select Rimage 2000i - Disc Color 480i. e. Continue following the prompts. Note: If the Rimage software installation does not start, navigate: Start > Run and browse to select Setup.exe from the software disc.  In Windows XP Professional, a warning message displays that the software has not passed Windows Logo Testing. Select Continue Anyway to install the required software. In Windows 2000 Professional, a warning message that the software you are about to install does not contain a digital signature displays. Select Yes to install the software. a. When the Hardware Setup for Printers window displays, complete all of the steps in the window before selecting Next,  Note: If you have a second Rimage 2000i, connect the other USB 2.0 cable to your PC as directed in step 3 of the Hardware Setup for Printers window and follow the instructions. 1. In the Found New Hardware Wizard, select the No, not at this time option. 2. When a warning message displays that the printer has not passed the Windows Logo Testing, select Continue Anyway. 3. Complete the remaining dialogs before continuing to the next step. b. When the printer installation is complete, select Next on the Hardware Setup for Printers window. c. After selecting Finish at the last prompt, a window may appear requesting permission to restart the PC. Select Yes. The PC restarts. 6 Activate your Rimage software. You have 30 days to activate your Rimage software. Until your software is activated, you will be prompted to activate your software each time you start the Rimage software. When the activation dialog displays, select an option and follow the onscreen prompts to activate your software. 7 Learn more. For information about submitting orders to the Rimage 2000i across a network, refer to the Advanced Setup Guide included on the Rimage software disc. For information about operating and maintaining the Rimage 2000i, refer to the Rimage 2000i User Guide included with your product. For additional support and product information, go to www.rimage.com/support.html. In Windows 2000 Professional, the printer driver installs automatically. In Windows XP Professional, the new hardware is detected and the Found New Hardware Wizard displays. Note: One of the steps in the Hardware Setup for Printers window instructs you to connect the USB 2.0 cable from your Rimage 2000i to your PC. Connect the USB 2.0 cable at that time. Tip: For optimum performance, connect the Rimage 2000i USB 2.0 cable to a USB port on your motherboard rather than a USB card port. 