Sony PDW-HD1500 Operation Manual

LASER PRODUCT. Laser diode properties Wave length: 400 to 410 nm Emission duration: Continuous Laser output power: 135 mW (max. of pulse peak), 65 mW (max. of CW) Standard: IEC60825-1 (2001) Egenskaber for laserdiode Bølgelængde: 400 til 410 nm Strålingsvarighed: Kontinuerlig Afgivet lasereffekt: 135 mW (maks stråletoppunkt), 65 mW (maks ved kontinuerlig stråling) Standard: IEC60825-1 (2001) Tekniska data för laserdiod Våglängd: 400 till 410 nm Emissionslängd: Kontinuerlig Laseruteffekt: 135 mW (max. för pulstopp), 65 mW (m ...

Assigning user-defined clip and clip list names The following standard format names are assigned automatically to clips and clip lists that are created or recorded by XDCAM devices. Clips: C0001.MXF to C9999.MXF Clip lists: E0001E01.SMI to E0099E01.SMI This unit can handle clips and clip lists with user-defined names as well as names in the standard format. Limitations • Letters, numbers and symbols from the Unicode 2.0 character set can be used. However, the following control characters and symbols cannot be used. - Control characters: U+0000 to U+00 ...

See page 102 for more information about the setup menu item 028 HD CHARACTER. To treat the input and output signals of these connectors as non-audio signals, set the maintenance menu item M37: AUDIO CONFIG >M372: NON-AUDIO INPUT (recording) (see page 120) and setup menu item 823 NON- AUDIO FLAG PB (playback). h COMPOSITE OUTPUT 1, 2 (SUPER) (analog composite video output 1, 2 (superimpose)) connectors (BNC type) Output analog composite video signals. You can superimpose timecodes, menu settings, or error messages on the output of the 2 (S ...

Chapter 5 Operations in GUI Screens Sub clips (clips in clip lists) Clips (or parts of clips) that have been added to a clip list are called “sub clips”. Sub clips are virtual editing data that specify ranges in the original clips. You can use them without modifying the original data. The following figure illustrates the relation between clips and sub clips. In the above example, the whole of clip 2 has been added as sub clip 1, and the whole of clip 4 has been added as sub clip 2. Sub clip 3 is part of clip 3. Therefore, when clip list E0001 is pl ...

834 AUDIO INPUT LEVEL Select the analog audio input source. Sub-item 1 CH1 line: Line input mic: Microphone input 2 CH2 line: Line input mic: Microphone input 839 AUDIO AGC/LIMITER MODE For automatic input level adjustments performed on the analog audio signals recorded on channels 1 and 2, select whether to perform the adjustments in stereo mode or independently for channels 1 and 2. mono: Perform automatic adjustments independently for channels 1 and 2. stereo: Perform automatic adjustments in stereo mode. 840 AUDIO AGC SELECT Set the AGC saturation level. o ...

TC EXTERNAL IS SELECTED. SET TC INTERNAL MODE IN FUNCTION MENU. This appears when TCG on page P5 TC of the function menu is set to “EXT”, and you try to preset timecode or user bits by setting PRST/RGN to “PRESET”. Set TCG to “INT” (see page 45). REGEN mode! a) TCG REGEN MODE IS SELECTED. SET TC PRESET MODE IN FUNCTION MENU. This appears when PRST/RGN on page P5 TC of the function menu is set to “TC” or “VITC”, and you try to preset timecode or user bits. Set PRST/RGN to “PRESET” (see page 45). REC RUN! a) TCG RUN MODE IS SET TO ...

Chapter 3 Preparations For details of HDW-M2000/M2000P settings, refer to the HDW-M2000/M2000P Operation Manual. Connections for pool coverage The following figure shows an example of connections for pool coverage, with the PDW-700 Professional Disc Camcorder connected. HDW-M2000 (recorder) setting Settings on this unit REMOTE 1 (9P) button: Lit Remote control switch: REMOTE (see page 14) Setup menu item 214 REMOTE INTERFACE: 9PIN PDW-700 (camcorder) setting Settings on this unit HDSDI REMOTE I/F on page CAM CONFIG 1 of the MAINTENANCE menu: other than OFF Remote ...