Philips ID5551B/55 Manual 

www.philips.com/welcome EN Telephone Answering Machine Warning Use only rechargeable batteries. Charge the handset for 24 hours before use. ID555 ! ID555_IFU_US_EN.book Page 1 Thursday, November 27, 2008 11:00 AM

1 1 Safety information 3 1.1 Equipment Approval Information 3 1.2 Interference Information 4 1.3 Hearing Aid Compatibility (HAC) 5 1.4 FCC RF Radiation Exposure Statement 5 2 Important 7 2.1 Power requirements 7 2.2 Safety Information 8 2.3 Conformity 8 2.4 Electric, Magnetic and Electromagnetic Fields (“EMF”) 8 2.5 Recycle your batteries 9 2.6 Service Centers 9 3 Your phone 10 3.1 What’s in the box 10 3.2 Overview of your phone 11 3.3 Display icons 13 3.4 Overview of the base station 14 4 Getting started 15 4.1 Connect the base station 15 4.2 Install your phone 15 4.3 Menu structure 17 5 Using your phone 20 5.1 Make a call 20 5.2 Answer a call 21 5.3 End a call 21 6 Use more of your phone 22 6.1 Switch the handset on/off 22 6.2 Keypad lock/unlock 22 6.3 Text or number entry 22 6.4 Call in progress 22 6.5 Call waiting 23 6.6 Caller Line Identification 23 6.7 Using your Phonebook 24 6.8 Using the Redial list 26 6.9 Using the Call log 27 6.10 Using the Intercom 28 6.11 Paging 29 7 Personal settings 30 7.1 Change the Handset Name 30 7.2 Handset Tones 30 7.3 Change the Display Language 31 7.4 Set Contrast Level 31 Table of contents ID555_IFU_US_EN.book Page 1 Thursday, November 27, 2008 11:00 AM

7.5 Activate/Deactivate Auto Hang-up 31 8 Clock and Alarm settings 32 8.1 Set date and time 32 8.2 Set date/time format 32 8.3 Set alarm 33 8.4 Set alarm tone 33 9 Advanced settings 34 9.1 Easy Call 34 9.2 Activate/Deactivate Conference mode 34 9.3 Call Barring 35 9.4 Change master PIN 35 9.5 Registration 36 9.6 Unregister a handset 37 9.7 Reset Unit 37 9.8 Default settings 37 9.9 Set area code 38 9.10 Set Auto Prefix 38 9.11 Change Flash time 39 9.12 Change the Dial Mode 39 9.13 Set first ring 39 10 Telephone answering machine (TAM) 41 10.1 Play 41 10.2 Delete all messages 43 10.3 Set the Answer mode 43 10.4 Personalized Outgoing Message 43 10.5 Switch the Answering Machine On/Off via handset 44 10.6 Answering Machine settings 44 10.7 Call Screening 46 11 Technical data 48 12 Frequently asked questions 49 13 Index 52 ID555_IFU_US_EN.book Page 2 Thursday, November 27, 2008 11:00 AM

approved for connection to the Public Switched Telephone Network and is in compliance with parts 15 and 68, FCC Rules and Regulations and the Technical Requirements for Telephone Terminal Equipment published by ACTA. 1.1.1 Notification to the Local Telephone Company On the bottom of this equipment is a label indicating, among other information, the US number and Ringer Equivalence Number (REN) for the equipment. You must, upon request, provide this information to your telephone company. The REN is useful in determining the number of devices you may connect to your telephone line and still have all of these devices ring when your telephone number is called. In most (but not all) areas, the sum of the RENs of all devices connected to one line should not exceed 5. To be certain of the number of devices you may connect to your line as determined by the REN, you should contact your local telephone company. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details. Notes • This equipment may not be used on coin service provided by the telephone company. • Party lines are subject to state tariffs, and therefore, you may not be able to use your own telephone equipment if you are on a party line. Check with your local telephone company. • Notice must be given to the telephone company upon permanent disconnection of your telephone from your line. • If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this product does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer. US Number is located on the cabinet bottom. REN Number is located on the cabinet bottom. ID555_IFU_US_EN.book Page 3 Thursday, November 27, 2008 11:00 AM

Company Should your equipment cause trouble on your line which may harm the telephone network, the telephone company shall, where practicable, notify you that temporary discontinuance of service may be required. Where prior notice is not practicable and the circumstances warrant such action, the telephone company may temporarily discontinue service immediately. In case of such temporary discontinuance, the telephone company must: (1) promptly notify you of such temporary discontinuance; (2) afford you the opportunity to correct the situation; and (3) inform you of your right to bring a complaint to the Commission pursuant to procedures set forth in Subpart E of Part 68, FCC Rules and Regulations. The telephone company may make changes in its communications facilities, equipment, operations or procedures where such action is required in the operation of its business and not inconsistent with FCC Rules and Regulations. If these changes are expected to affect the use or performance of your telephone equipment, the telephone company must give you adequate notice, in writing, to allow you to maintain uninterrupted service. 1.2 Interference Information This equipment generates and uses radio frequency energy which may interfere with residential radio and television reception if not properly installed and used in accordance with instructions contained in this manual. Reasonable protection against such interference is ensured, although there is no guarantee this will not occur in a given installation. If interference is suspected and verified by switching this equipment on and off, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient the radio/television receiver’s antenna, relocate the equipment with respect to the receiver, plug the equipment and receiver into separate circuit outlets. The user may also wish to consult a qualified radio/television technician for additional suggestions. This equipment has been fully tested and complies with all limits for Class B computing devices pursuant to part 15 FCC Rules and Regulations. This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. This device complies with Part 15 of the FCC Rules. Operation is subject ID555_IFU_US_EN.book Page 4 Thursday, November 27, 2008 11:00 AM

(1) This device may not cause harmful interference; and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Privacy of Communications may not be ensured when using this product. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna (that is, the antenna for radio or television that is “receiving” the interference). • Reorient or relocate and increase the separation between the telecommunications equipment and receiving antenna. • Connect the telecommunications equipment into an outlet on a circuit different from that to which the receiving antenna is connected. If these measures do not eliminate the interference, please consult your dealer or an experienced radio/ television technician for additional suggestions. Also, the Federal Communications Commission has prepared a helpful booklet, “How To Identify and Resolve Radio/TV Interference Problems.” This booklet is available from the U.S. Government Printing Office, Washington, D.C. 20402. Please specify stock number 004-000-00345-4 when ordering copies. Notice: The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 1.3 Hearing Aid Compatibility (HAC) This telephone system meets FCC/ Industry Canada standards for Hearing Aid Compatibility. 1.4 FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed ID555_IFU_US_EN.book Page 5 Thursday, November 27, 2008 11:00 AM

distance of 20 centimeters between the radiator and your body. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines when used with the belt clip supplied with this product. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. ID555_IFU_US_EN.book Page 6 Thursday, November 27, 2008 11:00 AM

before you use your phone. It contains important information and notes regarding your phone. NOTICE: This product meets the applicable Industry Canada technical specifications. The equipment must be installed using an acceptable method of connection. The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations. Repairs to certified equipment should be made by an authorized Canadian maintenance facility designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment. Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe systems, if present, are connected together. This precaution may be particularly important in rural areas. CAUTION: Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or electrician, as appropriate. NOTES: This equipment may not be used on coin service provided by the telephone company. 2.1 Power requirements • This product requires an electrical supply of 100-240 volts AC. In case of power failure, the communication can be lost. • The Electrical network is classified as hazardous. The only way to power down the charger is to unplug the power supply from the electrical outlet. Ensure that the electrical outlet is always easily accessible. • The voltage on the network is classified as TNV-3 (Telecommunication Network Voltages), as defined in the standard EN 60-950. Warning To avoid damage or malfunction: • Do not allow the charging contacts or the battery to come into contact with metal objects. • Do not open it as you could be exposed to high voltages. • Never use any other battery than the one delivered with the product or recommended by Philips: risk of explosion. • Always use the cables provided with the product. ! ID555_IFU_US_EN.book Page 7 Thursday, November 27, 2008 11:00 AM

a) TCL, PL-043043, Li-ion polymer battery, 3.7V 500mAH b) Mcnair, MC-163-500, Li-ion polymer battery, 3.7V 500mAH • Use only with provided adaptor: Base Station a) Electronic Sales Ltd, IW507, 7.5V 500mA b) Electronic Sales Ltd, TR5075G, 7.5V 500mA Charger pod a) Electonic Sales Ltd, TR1575G, 7.5V 150mA b) Electonic Sales Ltd, IW157, 7.5V 150mA 2.2 Safety Information • Handsfree activation could suddenly increase the volume in the earpiece to a very high level: make sure the handset is not too close to your ear. • This equipment is not designed to make emergency calls when the power fails. An alternative has to be made available to allow emergency calls. • Do not expose the phone to excessive heat caused by heating equipment or direct sunlight. • Do not drop your phone or allow objects to fall on your phone. • Do not use any cleaning agents containing alcohol, ammonia, benzene, or abrasives as these may harm the set. • Do not use the product in places where there are explosive hazards. • Do not let small metal objects come into contact with the product. This can deteriorate audio quality and damage the product. • Do not allow the charger to come into contact with liquids. • Active mobile phones in the vicinity may cause interference. About operating and storage temperatures: • Operate in a place where temperature is always between 0 and 35º C (32 to 95º F). • Store in a place where temperature is always between - 20 and 45º C (-4 to 113º F). • Battery life may be shortened in low temperature conditions. 2.3 Conformity We, Philips declare that the product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. This product can only be connected to the analogue telephone networks of the countries mentioned on the packaging. You can find the Declaration of Conformity on www.p4c.philips.com. 2.4 Electric, Magnetic and Electromagnetic Fields (“EMF”) 1. Philips Royal Electronics manufactures and sells many ID555_IFU_US_EN.book Page 8 Thursday, November 27, 2008 11:00 AM

which usually, as with any electronic apparatus, have the ability to emit and receive electro magnetic signals. 2. One of Philips' leading Business Principles is to take all necessary health and safety precautions for our products, to comply with all applicable legal requirements and to stay well within the EMF standards applicable at the time of producing the products. 3. Philips is committed to develop, produce and market products that cause no adverse health effects. 4. Philips confirms that if its products are handled properly for their intended use, they are safe to use according to scientific evidence available today. 5. Philips plays an active role in the development of international EMF and safety standards, enabling Philips to anticipate further developments in standardisation for early integration in its products. 2.5 Recycle your batteries Do not dispose your rechargeable batteries. Call the toll fee number 1- 800-822-8837 to get instructions on how to recycle your batteries. The RBRC® Seal on the nickel metal hydride battery indicates that Philips Royal Electronics is voluntarily participating in an industry program to collect and recycle these batteries at the end of their useful lives, when taken out of service within the United States and Canada. The RBRC® program provides a convenient alternative to placing used nickel metal hydride batteries into the trash or municipal waste, which may be illegal in your area. Philips’s participation in RBRC® makes it easy for you to drop off the spent battery at local retailers participating in the RBRC® program or at authorized Philips product service centers. Please call 1-800-8-BATTERY for information on Ni-MH battery recycling and disposal bans/ restrictions in your area. Philips’s involvement in this program is part of its commitment to protecting our environment and conserving natural resources. RBRC® is a registered trademark of Rechargeable Battery Recycling Corporation. 2.6 Service Centers Call Center (USA and Canada): 800-233-8413 E-mail support: [email protected] ID555_IFU_US_EN.book Page 9 Thursday, November 27, 2008 11:00 AM

To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. 3.1 What’s in the box Note *You may find in the box the line adaptor delivered separately from the line cable. In this case, you have to connect the line adaptor to the line cord first before plugging the line cord to the line socket. In multihandset packs, you will find one or more additional handsets, chargers with power supply units and additional rechargeable batteries. Handset Base station Battery door 1 Li-ion rechargeable battery Power supply Line cord* User manual Guarantee Quick Start Guide ID555_IFU_03_product_presentation.fm Page 10 Friday, November 28, 2008 10:50 AM

A Earpiece B Display See page 13 for an overview of the display icons. C Left Softkey m Select the function displayed on the handset screen directly above it. During a call: Initiate a second call, consult phonebook or transfer a call. Switch on the backlight. D Right Softkey > Select the function displayed on the handset screen directly above it. Switch on the backlight. E Navigation keys : In idle mode: Scroll up to access the Call log and scroll down to access the Phonebook. During a call: Scroll up/down to increase or decrease earpiece and speaker volume. In editing mode: Scroll up/down to go to the previous character or next character. In other modes: Scroll up/down a menu list or go to the previous or next record in the Phonebook, Redial list or Call log. F Talk key r In idle mode: Answer an incoming external or internal call. During a call: Activate the recall function. In other modes: Dial the selected number in the Phonebook, Redial list or Call log. G Hang-up key e In idle mode: Long press to switch on/ off the handset. During a call: Hang up a call. In other modes: Return to the idle mode. H Menu key M In idle mode: Go to the main menu. I Loudspeaker key v In idle mode: Turn on the loudspeaker and dial the number. Answer an incoming call using handsfree mode. During a call: Toggle the loudspeaker on/off. J Redial key a In idle mode: Access the Redial list. ID555_IFU_03_product_presentation.fm Page 11 Friday, November 28, 2008 10:50 AM

In idle mode: Insert *. Long press to lock/unlock the keypad. During a call: Insert *. In call log reviewing mode: Press repeatedly to view the alternate dialing sequences. L Mute key [ During a call: Mute/Unmute the handset microphone. M Call transfer key & Intercom/ Conference key c In idle mode: Initiate an internal call. During a call: Hold the line and page another handset. Long press to start a conference between internal and external calls. N Ringer on/off key & Pause key # In idle mode: Insert #. Long press to turn the ringer on/off. During a call: Insert #. When predialing: Long press to insert a pause marked “P”. In editing mode: Long press to switch between upper and lower case. O Microphone P Loudspeaker Q Battery door Danger Handsfree activation can suddenly increase the volume in the earpiece to a very high level. Make sure the handset is not too close to your ear. ID555_IFU_03_product_presentation.fm Page 12 Friday, November 28, 2008 10:50 AM

is fully charged. Icon blinks during charge and when the battery is low. Indicates that the battery is fully discharged. Indicates that an external call is connected or held. Icon blinks when receiving an incoming call. Indicates new voice messages are received. Icon blinks when there are unread messages. Displays when there are existing call log records or when call log is accessed. Icon blinks when there are new missed calls. Displays when the alarm clock is activated. Displays when the loudspeaker is activated. Displays when ringer off is activated. Indicates that the telephone answering machine is activated. Icon blinks when the memory for answering machine messages is full. Indicates that the handset is registered and within range of the base station. Icon blinks when the handset is out of range or is searching for a base. ID555_IFU_03_product_presentation.fm Page 13 Friday, November 28, 2008 10:50 AM

A Message Counter Blinking: Indicates number of new messages. Steady: Indicates number of old messages. 2 bars flashing: Indicates that there is no more memory left. Indicates the volume level (L0 - L5) when V is pressed. Indicates the current message number during playback. B On/Off key o In idle mode, short press to switch on/ off the answering machine. C Volume keys V Increase/Decrease speaker volume during message playback. There are 5 volume levels. The call screening is activated if the speaker volume is not set to off. D Erase key x Delete current message during message playback. Long press to delete all messages when the answering machine is in idle mode (unread messages will not be deleted). E Repeat key l Go to previous message if pressed twice during message playback. Replay current message if pressed once during message playback. F Play/Stop key P Play phone messages (the first recorded will be played first). Stop message playback. G Skip key R Skip to the next message during message playback. H Handset locator key C Page handset. Long press to start registration procedure. ID555_IFU_03_product_presentation.fm Page 14 Friday, November 28, 2008 10:50 AM

Place the base station in a central location near the telephone line socket and electricity socket. Connect the line cord and the power cable to their corresponding connectors at the bottom of the base station as shown. Connect the other end of the line cord to the telephone line socket and the other end of the power cable to the electricity socket. Note The line adaptor may not be attached to the line cord. In this case, you have to connect the line adaptor to the line cord first before plugging the line cord to the line socket. Warning Avoid placing the base station too close to large metal objects such as filing cabinets, radiators or electrical appliances. This can impair the range and sound quality. Buildings with thick internal and external walls may impair transmission of signals to and from the base. Warning The base station does not have an ON/OFF switch. Power is applied when the power adaptor is plugged into the unit and connected to the electricity socket. The only way to power down the unit is to unplug the power adaptor from the electricity socket. Therefore, ensure that the electricity socket is easily accessible. The power adaptor and telephone line cord have to be connected correctly, as incorrect connection could damage the unit. Always use the telephone line cord supplied with the unit. Otherwise, you may not get a dial tone. 4.2 Install your phone Before using the handset, the batteries have to be installed and fully charged. 1 2 3 ! ! ID555_IFU_US_EN.book Page 15 Thursday, November 27, 2008 11:00 AM

battery supplied with your unit. There could be risk of battery leakage if you use other battery types. Slide out the battery cover. Place the battery and replace the cover. 4.2.2 Charge battery Warning The handset must be charged for at least 24 hours before using it for the first time. When the battery level becomes low, the low battery sensor alerts you by sounding an audible tone and blinking the battery icon. If the battery level becomes exceedingly low, the phone automatically switches off and any function in progress will not be saved. Place the handset on the charging cradle of the base station. A melody is emitted if the handset is placed correctly. The battery icon on the display blinks during charge. The battery icon becomes steady when the handset is fully charged. Note Optimal battery life is reached after 3 cycles of complete charging (over 15 hours) and discharging, allowing approximately 12 hours of talk-time and 150 hours of stand-by time. ! 1 2 ! 1 2 3 ID555_IFU_US_EN.book Page 16 Thursday, November 27, 2008 11:00 AM

mode to enter the main menu. Use navigation keys : to navigate within the menus and press left softkey m to enter each option. PHONEBOOK NEW ENTRY LIST EDIT ENTRY SELECT MELODY DELETE ENTRY DELETE ALL DIRECT MEMORY KEY 1 ... KEY 9 PERSONAL SET HANDSET NAME HANDSET TONES RING VOLUME RING TONES List of melodies KEY BEEP ON/OFF LANGUAGE List of languages CONTRAST LEVEL 1/2/3/4/5 AUTO HANG-UP ON/OFF CLOCK & ALARM SET DATE/TIME SET FORMAT TIME FORMAT 12 HOURS/24 HOURS DATE FORMAT DD/MM / MM/DD ALARM OFF/ON ONCE/ON DAILY ALARM TONE MELODY 1/MELODY 2/MELODY 3 ID555_IFU_US_EN.book Page 17 Thursday, November 27, 2008 11:00 AM

NUMBER 3/NUMBER 4 CHANGE PIN REGISTRATION UNREGISTER COUNTRY RESET AUTO PREFIX DETECT DIGIT PREFIX RECALL TIME SHORT/MEDIUM/LONG DIAL MODE TONE/PULSE AREA CODE FIRST RING ON/OFF ID555_IFU_US_EN.book Page 18 Thursday, November 27, 2008 11:00 AM

ANSWER ONLY PLAY/RECORD OGM/ DELETE ANSWER MODE ANSWER & REC. ANSWER ONLY SETTINGS RING DELAY 3 RINGS/4 RINGS/5 RINGS/ 6 RINGS/7 RINGS/8 RINGS/ ECONOMY REMOTE ACCESS ACTIVATE/DEACTIVATE HS SCREENING ON/OFF VOICE LANGUAGE List of languages ID555_IFU_US_EN.book Page 19 Thursday, November 27, 2008 11:00 AM

5 Using your phone 5.1 Make a call 5.1.1 Predialing Dial the number (maximum 24 digits). Press r or v key. • The call is initiated. Tip You may insert a prefix number to the beginning of your predial number, see “Set area code” on page 38 for more information. 5.1.2 Direct dialing Press r or v key to take the line. Dial the number. • The call is initiated. 5.1.3 Call from redial list Press a key in idle mode. Scroll : to an entry in the redial list. Press r or v key. • The call is initiated. Tip The handset stores the last 20 numbers dialed. The last number dialed will appear first in the redial list. If the redial number matches a phonebook entry, the name will be displayed instead. 5.1.4 Call from the call log Press u in idle mode. Scroll : to CALL LIST or ANSWER MACHINE and press mSELECT to enter the respective sub-menus. Scroll : to an entry. Press r or v key. • The call is initiated. Note You need to subscribe to Caller Line Identification service to be able to see the caller’s number or name in the call log (see “Access Call log” on page 27). 5.1.4.1 To choose the format for call log display You must choose the correct format to dial the area code and number of the call log record chosen. The original incoming number from the call log will appear as a 7, 10 or 11-digit number. If it is a long distance call, the prefix digit 1 will automatically appear in front of the 10-digit local calls. When viewing the call log, press * to change the format of the call log display as it should be dialed from your location. For example, if the call log entry appears as “234-567-8900”: • Press * once to display “1-234-567-8900” • Press * twice to display “567- 8900” • Press * 3 times to display “1-567-8900” 1 2 1 2 1 2 3 1 2 3 4 1 ID555_IFU_US_EN.book Page 20 Thursday, November 27, 2008 11:00 AM

21 • Press * 4 times to display “1-234-567-8900” again. To dial the current displayed number, press * key. • The call is initiated. Note You need to subscribe to Caller Line Identification service to be able to see the caller’s number or name in the call log (see “Access Call log” on chapter 6.9.1). When saving the call list entry to phonebook, the original incoming number will be saved instead of the current displayed number. If the first 3 digits of the incoming number corresponds to the local area code set in your phone, they will be filtered automatically when you press the r or v key to dial. To change the local area code, please refer to see “Set area code” on chapter 9.10. 5.1.5 Call from the phonebook Press d in idle mode. Scroll : to a phonebook entry. Press r or v key. • The call is initiated. Tip Instead of scrolling : to browse the phonebook entries, you can press the numeric key corresponding to the first letter of the entry you wish to locate. For example, pressing 2 will show the entries starting with A. Pressing 2 again will show the entries starting with B, etc... 5.2 Answer a call When the phone rings, press r key. • The call is established. Note Incoming call has priority over other events. Whenever there is an incoming call, other status in progress such as phone setting, menu navigation, etc will be aborted. Danger When the handset rings during an incoming call, please do not hold the handset too close to your ear, as the volume of the ringing tone may damage your hearing. 5.2.1 Handsfree answering When the phone rings, press v key. • The handset loudspeaker is activated. Danger Handsfree activation can suddenly increase the volume in the earpiece to a very high level. Make sure the handset is not too close to your ear. 5.3 End a call To end a conversation, press e key. Tip If AUTO HANG-UP mode is activated (see “Activate/Deactivate Auto Hang-up” on page 31), you can simply place the handset back to its base station to end the call. This feature is activated by default. Note The call duration will be displayed on the handset screen for about 5 seconds. 2 1 2 3 ID555_IFU_US_EN.book Page 21 Thursday, November 27, 2008 11:00 AM

6 Use more of your phone 6.1 Switch the handset on/off Press and hold e key for 3 seconds to switch on/off the handset in idle mode. 6.2 Keypad lock/unlock Press and hold * key for 2 seconds to lock/unlock the keypad in idle mode. 6.3 Text or number entry When you select a field in which you can enter text, you can enter the letters that are printed on the keys by pressing the relevant key once or several times. For example, to enter the name “PAUL”: Press 7 once: P Press 2 once: PA Press 8 twice: PAU Press 5 three times: PAUL The table below gives you the character assignment during text or number entry: Tip Press >BACK to delete the last digit or character entered. 6.4 Call in progress Some options are available to you during a call. The available options are: 6.4.1 Adjust earpiece volume During a call, press : to select from VOLUME 1 to VOLUME 3. 6.4.2 Mute/Unmute microphone When the microphone is muted, your correspondent cannot hear you. During a call, press [ to turn off the microphone. Press [ again to turn on the microphone. Keys Assigned characters 1 space 1 @ _ # = < > ( ) & £ $ ¥ [ ] { } ¤ § 2 a b c 2 à ä ç å æ 3 d e f 3 è é ∆ Φ 4 g h i 4 ì Γ 1 2 3 4 € 5 j k l 5 Λ 6 m n o 6 ñ ò ö 7 p q r s 7 β Π Θ Σ 8 t u v 8 ù ü 9 w x y z 9 ø Ω Ξ Ψ 0 . 0 , / : ; " ’ ! ¡ ? ¿ * + - % \ ^ ~ | # Long press to switch between upper and lower case. * * 1 2 ID555_IFU_US_EN.book Page 22 Thursday, November 27, 2008 11:00 AM

23 6.4.3 Activate/Deactivate loudspeaker mode Danger Handsfree activation can suddenly increase the volume in the earpiece to a very high level. Make sure the handset is not too close to your ear. During a call, press v key to activate the loudspeaker mode. Press v key again to return to normal mode. 6.4.4 Adjust loudspeaker volume During a call in handsfree mode, press : to select from VOLUME 1 to VOLUME 5. 6.4.5 Initiate a second call (subscription dependent) During a call, press >OPTION and select START 2ND CALL to put the current call on hold and initiate a second external call. Then enter the phone number of the second call. 6.4.6 Consult phonebook During a call, press >OPTION and select PHONEBOOK to access and review phonebook entries. 6.5 Call waiting If you have subscribed to Call Waiting service, the earpiece will emit a beep tone to inform you that there is a second incoming call. The number or name of the second caller will also be displayed on your phone if you have subscribed to Caller Line Identification service (CLI). Please contact your network provider for more information on this service. • When you receive a second incoming call while on the phone, press r + 2 to put the current call on hold and answer the second call OR • Press r + 1 to end the current call and answer the second call. • Press r + 2 subsequently to toggle between these 2 calls. The above operations may be different according to your network. Note The call waiting indicator displays during 40 seconds. The missed call information will be displayed in the call log. (see “Access Call log” on page 27) 6.6 Caller Line Identification Caller Line Identification (CLI) is a special service that you may subscribe from your network operator. If you have subscribed to CLI service, the identity of the caller (caller’s number or name) will be displayed on your handset during an incoming call. If you have not subscribed to this service, or if the caller has chosen to withhold the number, the identity of the caller will not be displayed. Please contact 1 2 ID555_IFU_US_EN.book Page 23 Thursday, November 27, 2008 11:00 AM

your network provider for more information on this service. 6.7 Using your Phonebook Your phone can store up to 200 phonebook memories, including 10 direct access memories (1 to 9). Depending on your country, Key 1 and Key 2 may be preset to the voice mail number and information service number of your network operator respectively. Each phonebook entry can have a maximum of 24 digits for the phone number and 14 characters for name. 6.7.1 Access phonebook Press d in idle mode and scroll : to browse the phonebook. • The phonebook entries are listed in alphabetical order. To view the details of a phonebook entry, scroll : to the phonebook entry and press mSELECT. To dial a number from the phonebook, scroll : to the phonebook entry and press r. Tip Instead of scrolling : to browse the phonebook entries, you can press the numeric key corresponding to the first letter of the entry you wish to locate. For example, pressing 2 will show the entries starting with A. Pressing 2 again will show the entries starting with B, etc... 6.7.2 Store a contact in the phonebook Press M in idle mode, press mSELECT to enter PHONEBOOK, press mSELECT to enter NEW ENTRY. Enter the name of the contact (maximum 14 characters) and press mOK. Enter the phone number (maximum 24 digits) and press mOK. • A validation tone is emitted. Tip You cannot store a new phonebook entry when the memory is full. In this case, you have to delete existing entries to make space for new entries. 6.7.3 Edit a phonebook entry Press M in idle mode, press mSELECT to enter PHONEBOOK, scroll : to EDIT ENTRY and press mSELECT. Scroll : to select an entry you wish to edit and press mSELECT. Press >CLEAR to erase the letters one by one, enter the name and press mOK. Press >CLEAR to erase the digits one by one, enter the phone number and press mOK. • A validation tone is emitted. 1 2 3 1 2 3 1 2 3 4 ID555_IFU_US_EN.book Page 24 Thursday, November 27, 2008 11:00 AM

25 6.7.4 Set melody With this function you can personalize the melody played when someone in the phonebook calls you. Note You need to subscribe to Caller Line Identification service to be able to benefit from this feature. Press M in idle mode, press mSELECT to enter PHONEBOOK, scroll : to SELECT MELODY and press mSELECT. Scroll : to select an entry you wish to set the melody for and press mSELECT. Press mEDIT to set or change the melody for the contact. Scroll : to the melody list and press mSELECT to confirm. • A validation tone is emitted. 6.7.5 Delete a phonebook entry Press M in idle mode, press mSELECT to enter PHONEBOOK, scroll : to DELETE ENTRY and press mSELECT. Scroll : to select an entry you wish to delete and press mSELECT. DELETE? is displayed on the screen. Press mOK to confirm deletion. • A validation tone is emitted. 6.7.6 Delete the phonebook list Press M in idle mode, press mSELECT to enter PHONEBOOK, scroll : to DELETE ALL and press mSELECT. DELETE ALL? is displayed on the screen. Press mOK to confirm deletion. • A validation tone is emitted. 6.7.7 Direct Access Memory You can store up to 9 direct access memories (Keys 1 to 9). A long press on the keys in idle mode will automatically dial the stored phone number. Depending on your country, Key 1 and Key 2 may be preset to the voice mail number and information service number of your network operator respectively. 6.7.7.1 Store Direct Access Memory Press M in idle mode, press mSELECT to enter PHONEBOOK, scroll : to DIRECT MEMORY and press mSELECT. Scroll : to select a key (Keys 1 to 9) and press mSELECT. • The stored number is displayed (if any). Press mOK to display the menu options. Press mSELECT to select EDIT. 1 2 3 4 1 2 3 1 2 1 2 3 4 ID555_IFU_US_EN.book Page 25 Thursday, November 27, 2008 11:00 AM

Scroll : to the entry you wish to store as direct access memory and press mSELECT to view the details. Press mSELECT to confirm. • A validation tone is emitted. 6.7.7.2 Delete Direct Access Memory Press M in idle mode, press mSELECT to enter PHONEBOOK, scroll : to DIRECT MEMORY and press mSELECT. Scroll : to select a key (Keys 1 to 9) and press mSELECT. • The stored number is displayed (if any). Press mSELECT to display the menu options. Scroll : to DELETE and press mSELECT. • A validation tone is emitted. 6.8 Using the Redial list The redial list stores the last 20 numbers dialed. A maximum of 24 digits can be displayed for each entry. 6.8.1 Access Redial list Press a in idle mode and scroll : to browse the redial list. • The last number dialed will appear first in the redial list. If the redial number matches a phonebook entry, the name will be displayed instead. Note To return to idle mode, press e key. 6.8.2 Save a redial number into the phonebook Press a in idle mode and scroll : to select an entry. Press mSELECT to view the details. Press a and press mSELECT to select SAVE NUMBER. Enter the name of the contact (maximum 14 characters) and press mOK. Edit the number if necessary and press mOK. • A validation tone is emitted. Note Press >CLEAR to delete the last digit or character entered. 6.8.3 Delete a redial number Press a in idle mode and scroll : to select an entry. Press a, scroll : to DELETE and press mOK. DELETE? is displayed on the screen. Press mOK again to confirm deletion. • A validation tone is emitted. 6.8.4 Delete the redial list Press a in idle mode. Press a, scroll : to DELETE ALL and press mOK. 5 6 1 2 3 4 1 1 2 3 4 1 2 3 1 2 ID555_IFU_US_EN.book Page 26 Thursday, November 27, 2008 11:00 AM

27 DELETE ALL? is displayed on the screen. Press mOK again to confirm deletion. • A validation tone is emitted. 6.9 Using the Call log The call log offers quick access to the CALL LIST and ANSWER MACHINE events. If you have subscribed to Caller Line Identification service, the identity of the caller (caller’s number or name) will be displayed together with the date and time of the call*. The CALL LIST records the last 50 entries of the incoming calls. The calls (missed and received) are displayed in chronological order with the most recent call at the top of the list. When the call list is empty, the screen displays LIST EMPTY. Note * If the identity of the caller is withheld or the network does not provide the date and time information, then only the date and time of the call will be displayed. If you have not subscribed to Caller Line Identification service, there will not be any information displayed in the call log. 6.9.1 Access Call log Press u in idle mode, scroll : to CALL LIST and ANSWER MACHINE and press mSELECT to enter the respective sub-menus. 6.9.2 Save a call list entry into the phonebook Press u in idle mode and scroll : to select an entry. Press mSELECT to view the details. Press a and press mSELECT to select SAVE NUMBER. Enter the name of the contact (maximum 14 characters) and press mOK. Edit the number (if necessary) and press mOK. • A validation tone is emitted. 6.9.3 Delete a call list entry Press u in idle mode, press mSELECT to enter CALL LIST, scroll : to an entry in the call list and press mOPTION. Scroll : to DELETE ENTRY and press mSELECT. Press mOK to confirm deletion. • A validation tone is emitted. 6.9.4 Delete the call list Press u in idle mode, press mSELECT to enter CALL LIST, scroll : to an entry in the call list and press mOPTION. Scroll : to DELETE ALL and press mSELECT. DELETE ALL? is displayed on the screen. Press mOK to confirm deletion. • A validation tone is emitted. 3 1 1 2 3 4 1 2 3 1 2 3 ID555_IFU_US_EN.book Page 27 Thursday, November 27, 2008 11:00 AM

6.10 Using the Intercom Warning Intercom and call transfer is only possible with handsets registered to the same base station. This feature is only available when there are at least 2 registered handsets. It allows you to make free internal calls, transfer external calls from one handset to another and use the conference option. 6.10.1 Intercom another handset Note If the handset does not belong to ID555 range, this function may not be available. Press c key in idle mode. • Intercom is established immediately if there are only 2 registered handsets. If there are more than 2 registered handsets, the handset numbers which are available for intercom will be displayed. Scroll : to the specific handset you want to call and press mSELECT. 6.10.2 Transfer an external call to another handset During the call, press and hold c key to put the external call on hold (the caller can no longer hear you). • Intercom is established immediately if there are only 2 registered handsets. If there are more than 2 registered handsets, the handset numbers which are available for intercom will be displayed. Scroll : to the specific handset you want to call and press mSELECT. • The called handset rings. Press r key on the called handset to answer the internal call, where both internal callers can talk. • Intercom is established. Press e key on the first handset to transfer the external call to the called handset. • The external call is transferred. Note If there is no answer from the called handset, press c key to resume the external call. 6.10.3 Answer an external call during intercom When there is an incoming external call during an intercom, a new call tone is emitted. To end the intercom and answer the external call, press e. The handset will ring. Press r to answer the external call. • Connection with the external call is established. ! 1 2 1 2 3 4 1 2 ID555_IFU_US_EN.book Page 28 Thursday, November 27, 2008 11:00 AM

29 Tip To put the internal call on hold and answer the incoming external call, press r key. 6.10.4 Switch between an internal and external call To switch between an internal or external call, press c key. 6.10.5 Establish a three-party conference call The conference call feature allows one external call to be shared with two handsets (in intercom). The three parties can share the conversation and no network subscription is required. During the call, press c key to put the external call on hold (the caller can no longer hear you). • Intercom is established immediately if there are only 2 registered handsets. If there are more than 2 registered handsets, the handset numbers which are available for intercom will be displayed. Scroll : to the specific handset you want to call and press mSELECT. • The called handset rings. Press r key on the called handset to answer the internal call, where both internal callers can talk. • Intercom is established. Press and hold c key for 2 seconds on the first handset to start the three-party conference. • CONFERENCE will be displayed on the screen once the conference call is established. Tip If CONFERENCE mode is activated (see “Activate/Deactivate Conference mode” on page 34), a three-party conference call is automatically established if the second handset takes the line when there is already an external call in progress. 6.11 Paging The paging feature enables you to locate a missing handset if the handset is in range and contains charged batteries. Press p key on the base station. • All the registered handsets start to ring. Once retrieved, press any key on the handset to end the paging. Note If there are no key presses within 30 seconds, the handset and base station will automatically return to idle mode. Tip To stop paging, press p key on the base station again. 1 2 3 4 1 2 ID555_IFU_US_EN.book Page 29 Thursday, November 27, 2008 11:00 AM

Name You can name the handset and display the handset name in idle mode. The default handset name of your handset is PHILIPS. Press M in idle mode, scroll : to PERSONAL SET and press mSELECT, press mSELECT to enter HANDSET NAME. Edit the handset name (maximum 12 characters) and press mOK to confirm. • A validation tone is emitted and the screen returns to previous menu. 7.2 Handset Tones 7.2.1 Set the Ring Volume Danger When setting the ring volume of your phone or when the handset rings during an incoming call, please do not hold the handset too close to your ear as the volume of the ringing tone may damage your hearing. There are 5 levels of ring volume, including progressive volume. Press M in idle mode, scroll : to PERSONAL SET and press mSELECT, scroll : to HANDSET TONES and press mSELECT. Press mSELECT again to enter RING VOLUME Scroll : to your desired volume level and press mOK to confirm. • A validation tone is emitted and the screen returns to previous menu. Note When the volume is set to off, the icon will be displayed on the screen. 7.2.2 Set the Ring Melody There are 15 polyphonic ring melodies available on your handset. Press M in idle mode, scroll : to PERSONAL SET and press mSELECT, scroll : to HANDSET TONES and press mSELECT. Scroll : to RING TONES and press mSELECT. Scroll : to your desired melody to play the melody. Press mOK to set the ring melody. • A validation tone is emitted and the screen returns to previous menu. 7.2.3 Activate/Deactivate Key Beep A single beep is emitted when a key is pressed. You can enable or disable the key beep. By default, the key beep is ON. Press M in idle mode, scroll : to PERSONAL SET and 1 2 1 2 1 2 3 1 ID555_IFU_US_EN.book Page 30 Thursday, November 27, 2008 11:00 AM

HANDSET TONES and press mSELECT. Scroll : to KEY BEEP and press mSELECT. Scroll : to ON or OFF and press mOK to confirm. • A validation tone is emitted and the screen returns to previous menu. 7.3 Change the Display Language Your handset can support different display languages. Press M in idle mode, scroll : to PERSONAL SET and press mSELECT, scroll : to LANGUAGE and press mSELECT. Scroll : to your desired language and press mSELECT to confirm. • A validation tone is emitted and the screen returns to previous menu. Tip Once the display language is set, the option menus on the handset will switch to display in the selected language immediately. However, it will not change the language of the predefined outgoing message of your answering machine. 7.4 Set Contrast Level There are 5 contrast level options (LEVEL 1, LEVEL 2, LEVEL 3, LEVEL 4 or LEVEL 5). The default contrast level is LEVEL 2. Press M in idle mode, scroll : to PERSONAL SET and press mSELECT, scroll : to CONTRAST and press mSELECT. Scroll : to your desired contrast level (LEVEL 1, LEVEL 2, LEVEL 3, LEVEL 4 or LEVEL 5) and press mSELECT to confirm. • A validation tone is emitted and the screen returns to previous menu. 7.5 Activate/Deactivate Auto Hang-up This function enables you to end a call automatically by simply replacing the handset on the base station. By default, the Auto Hang-up feature is ON. Press M in idle mode, scroll : to PERSONAL SET and press mSELECT, scroll : to AUTO HANG-UP and press mSELECT. Scroll : to ON or OFF and press mSELECT to confirm. • A validation tone is emitted and the screen returns to previous menu. 2 1 2 1 2 1 2 ID555_IFU_US_EN.book Page 31 Thursday, November 27, 2008 11:00 AM

8 Clock and Alarm settings This feature allows you to set the date, time and alarm settings for your phone. The default date and time is 01-01 and 00:00 respectively. 8.1 Set date and time Press M in idle mode, scroll : to CLOCK & ALARM and press mOK, press mSELECT to enter SET DATE/TIME. The last stored date is displayed. Enter the current date (dd-mm) and press mOK. The last stored time is displayed. Enter the current time (hh-mm). Press 2 to select A (am) or 7 to select P (pm) if the time is in 12 hours format. Press mOK to confirm. • A validation tone is emitted. Note An error tone will be emitted if an invalid digit is entered in the date/ time fields. Hour: 00 to 12; Minute: 00 to 59 Date: 01 to 31; Month: 01 to 12 Warning If your phone is connected to an ISDN line through an adaptor, the date & time may be updated after each call. The availability of date & time update is dependent on your network provider. Please check the date & time settings in your ISDN system or contact your network provider. 8.2 Set date/time format You can set your preferred date/time format for your phone. The default format is DD/MM and 24 HOURS. 8.2.1 Set time format Press M in idle mode, scroll : to CLOCK & ALARM and press mOK, scroll : to SET FORMAT and press mSELECT. Press mOK to enter TIME FORMAT. • The current setting is displayed. Scroll : to select time format display (12 HOURS or 24 HOURS) and press mOK to confirm. • A validation tone is emitted and the screen returns to previous menu. 8.2.2 Set date format Press M in idle mode, scroll : to CLOCK & ALARM and press mOK, scroll : to SET FORMAT and press mSELECT. Scroll : to enter DATE FORMAT and press mOK. • The current setting is displayed. Scroll : to select date format display (DD/MM or MM/DD) and press mOK to confirm. • A validation tone is emitted and the screen returns to previous menu. 1 2 3 ! 1 2 3 1 2 3 ID555_IFU_US_EN.book Page 32 Thursday, November 27, 2008 11:00 AM

33 8.3 Set alarm Press M in idle mode, scroll : to CLOCK & ALARM and press mOK, scroll : to ALARM and press mSELECT. Scroll : to OFF, ON ONCE or ON DAILY and press mSELECT. If you select ON ONCE or ON DAILY, enter the time (hh-mm) for the alarm and press 2 to select A (am) or 7 to select P (pm) if the time is in 12 hours format. Press mOK to confirm. • A validation tone is emitted and the screen returns to previous menu. Note The alarm tone and alarm icon will only sound/blink for 1 minute when the alarm time is reached. To mute the alarm tone, simply press any key on the handset. 8.4 Set alarm tone Press M in idle mode, scroll : to CLOCK & ALARM and press mOK, scroll : to ALARM TONE and press mSELECT. Scroll : to MELODY 1, MELODY 2 or MELODY 3 and press mSELECT to confirm. • A validation tone is emitted and the screen returns to previous menu. 1 2 3 1 2 ID555_IFU_US_EN.book Page 33 Thursday, November 27, 2008 11:00 AM

enables you to dial a number by pressing any key on your handset. This feature is very useful for direct access to emergency services. You can enter up to 24 digits for easy call number. 9.1.1 To activate Easy Call mode Press M in idle mode, scroll : to ADVANCED SET and press mSELECT, press mSELECT to enter EASY CALL. Press mSELECT to enter MODE. Scroll : to ON and press mSELECT to confirm. Enter the Easy Call number and press mOK to confirm. • A validation tone is emitted. 9.1.2 To deactivate Easy Call mode Long press M (when Easy Call mode has been activated before). Scroll : to OFF and press mSELECT to confirm. 9.1.3 To change Easy Call number Press M in idle mode, scroll : to ADVANCED SET and press mSELECT, press mSELECT to enter EASY CALL. Scroll : to NUMBER and press mSELECT. • The last stored Easy Call number is displayed (if any). Enter the easy call number (maximum 24 digits) and press mOK to confirm. • A validation tone is emitted and the screen returns to previous menu. 9.2 Activate/Deactivate Conference mode When conference mode is activated, you can initiate a three-party conference call with a second handset registered to your base station automatically if the second handset takes the line when there is already an external call in progress. The default setting for this mode is ON. Press M in idle mode, scroll : to ADVANCED SET and press mSELECT, scroll : to CONFERENCE and press mSELECT. Scroll : to ON or OFF and press mSELECT to confirm. • A validation tone is emitted and the screen returns to previous menu. 1 2 3 4 1 2 1 2 3 1 2 ID555_IFU_US_EN.book Page 34 Thursday, November 27, 2008 11:00 AM

selected handsets from dialing a phone number beginning with certain digits. You can set up to 4 different barring numbers, with each number containing up to 4 digits. 9.3.1 To activate/deactivate Call Barring Press M in idle mode, scroll : to ADVANCED SET and press mSELECT, scroll : to CALL BARRING and press mSELECT. Enter the master PIN when prompted and press mOK to confirm. Note By default, the master PIN is 0000. Press mSELECT to enter MODE. Scroll : to ON or OFF and press mSELECT to confirm. • A validation tone is emitted and the screen returns to previous menu. 9.3.2 To modify Call Barring number Press M in idle mode, scroll : to ADVANCED SET and press mSELECT, scroll : to CALL BARRING and press mSELECT. Enter the master PIN when prompted and press mOK to confirm. Note By default, the master PIN is 0000. Scroll : to NUMBER and press mSELECT. Scroll : to NUMBER 1, NUMBER 2, NUMBER 3 or NUMBER 4 and press mSELECT. Enter the barring number (maximum 4 digits) and press mOK to confirm. • A validation tone is emitted and the screen returns to previous menu. Note If a restricted number is dialed, the call will not be connected. When this happens, the phone emits an error tone and returns to idle mode. 9.4 Change master PIN The master PIN is used for setting call barring, registration/unregistration of handsets and for accessing the answering machine remotely. The default master PIN number is 0000. The maximum length of the master PIN is 4 digits. Your handset will prompt you whenever the PIN is required. Note The default PIN code is preset to 0000. If you change this PIN code, keep the PIN details in a safe place where you have easy access to them. Do not lose the PIN code. Press M in idle mode, scroll : to ADVANCED SET and 1 2 3 4 1 2 3 4 5 1 ID555_IFU_US_EN.book Page 35 Thursday, November 27, 2008 11:00 AM

CHANGE PIN and press mSELECT. Enter the current master PIN when prompted and press mOK to confirm. • The PIN entered will be shown as asterisks (*) on the screen. Enter the new PIN and press mOK. Enter the new PIN again and press mOK to confirm PIN change. • A validation tone is emitted and the screen returns to previous menu. Note If you forget your PIN, you will need to reset your phone to its default settings. See next section “Reset Unit” for more details. 9.5 Registration If you wish to register an additional handset or if you have inadvertently unregistered your phone handset and want to re-register it, follow the procedure described below. This is the procedure for registering ID555 handsets.The procedures may vary according to the handset you want to register. In this case, please refer to the manufacturer of the additional handset. Additional handsets must be registered to the base unit before you can use them. Up to 5 handsets can be registered to one base station. The master PIN is required before you can register or unregister handsets. Note By default, the master PIN is 0000. To register your handset manually: The Master PIN is required before you can register or unregister handsets. Note By default, the Master PIN is 0000. On the base station, press and hold p for approximately 5 seconds. The base station emits a beep when it is ready to accept registration. On the handset, press M key, scroll : to ADVANCED SET and press mSELECT, scroll : to REGISTRATION and press mSELECT. Note If no action is taken on the handset within 10 seconds, the registration procedure will be aborted. If this happens, repeat Step 1. Enter the Master PIN when prompted and press mOK to confirm. Note By default, the Master PIN is 0000. WAITING_ _ is displayed on the screen. Note If no base is found within a certain period, the handset returns to idle mode. 2 3 4 1 2 3 4 ID555_IFU_US_EN.book Page 36 Thursday, November 27, 2008 11:00 AM

Press M in idle mode, scroll : to ADVANCED SET and press mSELECT, scroll : to UNREGISTER and press mSELECT. Enter the master PIN when prompted and press mOK to confirm. Note By default, the master PIN is 0000. Scroll : to select the handset number to unregister and press mSELECT. • A validation tone is emitted to indicate successful unregistration and the screen shows UNREGISTERED. Note If no action is taken on the handset within 15 seconds, the unregistration procedure will be aborted and the handset returns to idle mode. To unregister a handset that does not belong to the ID555 range, you can only use the ID555 handset to unregister it. 9.7 Reset Unit You can reset your phone to its default settings with this feature. Warning Upon reset, all your personal settings, call log and redial list entries will be deleted and the phone will return to its default settings. However, your phonebook as well as the unread messages of your answering machine will remain unchanged after reset. Note You may have to configure your phone once again. Press M in idle mode, scroll : to ADVANCED SET and press mSELECT, scroll : to RESET and press mSELECT. RESET? is displayed on the screen. Press mOK to confirm. • A validation tone is emitted. • The unit is reset to its default settings (see “Default settings” on page 37). 9.8 Default settings 1 2 3 ! Ringer Volume LEVEL 2 Ringer Melody FLICK Earpiece Volume VOLUME 3 Speaker Volume VOLUME 3 Key Beep ON Contrast LEVEL 2 Auto Hang-up ON Alarm clock OFF Barring mode OFF Easy call OFF Handset Name PHILIPS Date/Time 01/01/2008; 00:00 Master PIN 0000 Conference OFF 1 2 ID555_IFU_US_EN.book Page 37 Thursday, November 27, 2008 11:00 AM

This feature is useful when you have subscribed to Caller Line Identification service. It allows you to set an area code in your ID555. Once the local area code is set, the phone automatically filters the area code for all incoming calls, by removing the area code for local calls and retaining the area code for calls from other areas. If it is a local call, then only the phone number of the caller is displayed during an incoming call or when you call the number from the call log. If it is a long distance call, then both the area code and phone number will be displayed in a proper format to be dialed out directly from the call log, or saved into the phonebook. Note You can enter a maximum of 3 digits for the area code. You need to subscribe to Caller Line Identification service to be able to see the caller’s number or name in the call log. See “Using the call log” on chapter 6.9 for details. Press M in idle mode, scroll : to ADVANCED SET and press mSELECT, scroll : to AREA CODE and press mSELECT. Enter the local area code (maximum 3 digits) and press

displayed (if any). Enter a detect string number (maximum 5 digits) and press mOK to confirm. PREFIX is displayed on the screen. • The last stored prefix number is displayed (if any). Enter the prefix number (maximum 14 digits) and press mOK to confirm. • A validation tone is emitted and the screen returns to previous menu. Note If no detect string (blank) is entered, the prefix number will be automatically added to the predial number after r key is pressed. For numbers starting with *, # or a pause (P), the prefix number will not be added to the predial number after r key is pressed. 9.11 Change Flash time Flash time (or dial delay) is the time delay by which the line will be disconnected after you press r key. It can be set to short, medium or long. The default value of flash time that is preset in your handset should be the best suited for your country network and therefore you should not need to change it. Press M in idle mode, scroll : to ADVANCED SET and press mSELECT, scroll : to FLASH TIME and press mSELECT. Scroll : to SHORT, MEDIUM or LONG and press mSELECT to confirm. • A validation tone is emitted and the screen returns to previous menu. 9.12 Change the Dial Mode The default value for dial mode that is preset in your handset should be the best suited for your country network and therefore you should not need to change it. Press M in idle mode, scroll : to ADVANCED SET and press mSELECT, scroll : to DIAL MODE and press mSELECT. Scroll : to TONE or PULSE and press mSELECT to confirm. • A validation tone is emitted and the screen returns to previous menu. 9.13 Set first ring When this function is set to Off, the first ring from a voice call will not sound. This is particularly useful in countries where calling line identity is sent after the first ring. Consequently, the phones in the house will not ring when a message arrives. Press M in idle mode, scroll : to ADVANCED SET and press mSELECT, scroll : to 3 4 5 1 2 1 2 1 ID555_IFU_US_EN.book Page 39 Thursday, November 27, 2008 11:00 AM

mSELECT. Scroll : to ON or OFF and press mOK to confirm. • A validation tone is emitted and the screen returns to previous menu. 2 ID555_IFU_US_EN.book Page 40 Thursday, November 27, 2008 11:00 AM

41 10 Telephone answering machine (TAM) Your phone features an answering machine that records unanswered calls when it is activated. The answering machine can store up to 99 messages. The maximum recording time is 30 minutes (including all your personalized outgoing messages). You can use the control keys on the base station to perform the basic functions of the answering machine such as message playback, deleting messages and adjustment of volume on the base station. For a description of each function of the control keys on the base station, please see “Overview of the base station” on page 14 for more details. You can also use the answer machine menu on the handset to access the answering machine functions. There is also a menu to set the answering machine options. To begin, press o key on your base station to switch on the answering machine (if it is switched off). Alternatively, you may switch on the answering machine via your handset (see “Switch the Answering Machine On/Off via handset” on page 44). 10.1 Play 10.1.1 Answering machine control keys on the base station Buttons on the base station Description o Press to turn on/off the answering machine P Press to play the message or stop the message playback x Press to delete the current message Press and hold for two seconds to delete all the old messages in idle mode l Press once to replay current message during message playback Press twice to go back to previous message during message playback R Press to skip the current message and play the next message ID555_IFU_US_EN.book Page 41 Thursday, November 27, 2008 11:00 AM

10.1.2 Playback of new messages via handset The last recorded message is played first via the loudspeaker. When all new messages have been played, the answering machine will stop and the icon stops blinking. Press M in idle mode, scroll : to ANSWER MACHINE and press mSELECT, press mSELECT again to enter PLAY menu. During playback, you can: Tip You can also playback messages by pressing u key in idle mode, scroll : to ANSWER MACHINE and press mSELECT, press mSELECT again to enter PLAY menu. 10.1.3 Playback of old messages via handset Old messages can only be played if there are no new messages. The first recorded message will be played first and the next message will be played automatically until there are no more messages. V Decrease (-) or increase (+) speaker volume during message playback C Press to page the handset Press and hold for more than three seconds to start registration procedure Adjust volume Press : key. Stop playback Press >STOP to end the message. Repeat Press mOPTION, scroll : to REPEAT and press mSELECT to play the message again. Next message Press mOPTION, scroll : to NEXT and press mSELECT. Previous message Press mOPTION, scroll : to PREVIOUS and press mSELECT. Delete message Press mOPTION, scroll : to DELETE and press mSELECT. Switch the playback to earpiece Press v key. 1 2 ID555_IFU_US_EN.book Page 42 Thursday, November 27, 2008 11:00 AM

43 Press M in idle mode, scroll : to ANSWER MACHINE and press mSELECT, press mSELECT again to enter PLAY menu. Press mSELECT. • The first recorded message will start to play until the last recorded message. During message playback, you can press m to select the available options (see options available under “Playback of new messages via handset” on page 42). 10.2 Delete all messages Note Unread messages will not be deleted. Warning Messages deleted cannot be recovered. Press M in idle mode, scroll : to ANSWER MACHINE and press mSELECT, scroll : to DELETE ALL and press mSELECT. DELETE ALL? is displayed on the screen. Press mOK to confirm deletion of all your messages. • A validation tone is emitted and the screen returns to previous menu. 10.3 Set the Answer mode There are 2 answer modes available: Answer only, and Answer & record. By default, the answer mode is ANSWER & REC., by which your correspondent can leave a message on the answering machine. This can be changed to ANSWER ONLY mode, by which your correspond cannot leave any messages on the answering machine. Press M in idle mode, scroll : to ANSWER MACHINE and press mSELECT, scroll : to ANSWER MODE and press mSELECT. Scroll : to ANSWER & REC. or ANSWER ONLY and press mSELECT. • The answer mode is set. Note Depending on the answer mode you have selected, the appropriate default outgoing message is played once the answering machine picks up an incoming call. 10.4 Personalized Outgoing Message 10.4.1 Record your Personalized Outgoing Message This personal outgoing message replaces the default ones. To revert to the default outgoing message, simply delete the personal outgoing message you have recorded. If you are not satisfied with the recorded outgoing message, simply record a new message to overwrite the old one. Press M in idle mode, scroll 1 2 3 ! 1 2 1 2 1 ID555_IFU_US_EN.book Page 43 Thursday, November 27, 2008 11:00 AM

: to ANSWER MACHINE and press mSELECT, scroll : to RECORD OGM and press mSELECT. Scroll : to ANSWER & REC. or ANSWER ONLY and press mSELECT. Scroll : to RECORD OGM and press mSELECT. • The recording starts. Press mSAVE to save your recording. • The recorded message will be played and the screen returns to previous menu once it has finished playing. To stop the playback, press mOK. Note The maximum length of an outgoing message is 2 minutes. 10.4.2 Playback your Personalized Outgoing Message Press M in idle mode, scroll : to ANSWER MACHINE and press mSELECT, scroll : to RECORD OGM and press mSELECT. Scroll : to ANSWER & REC. or ANSWER ONLY and press mSELECT. Press mSELECT to enter PLAY. • The previously recorded outgoing message (if any) is played, and then the screen returns to previous menu. 10.4.3 Delete your Personalized Outgoing Message Press M in idle mode, scroll : to ANSWER MACHINE and press mSELECT, scroll : to RECORD OGM and press mSELECT. Scroll : to ANSWER & REC. or ANSWER ONLY and press mSELECT. Scroll : to DELETE and press mSELECT. • The recorded message is deleted. 10.5 Switch the Answering Machine On/Off via handset Press M in idle mode, scroll : to ANSWER MACHINE and press mSELECT, scroll : to ANSWER ON/OFF and press mSELECT. Scroll : to ON or OFF and press mSELECT to confirm. • A validation tone is emitted and the screen returns to previous menu. 10.6 Answering Machine settings 10.6.1 Ring Delay This is the number of rings before the answering machine answers and starts playing your greeting message. 2 3 4 1 2 3 1 2 3 1 2 ID555_IFU_US_EN.book Page 44 Thursday, November 27, 2008 11:00 AM

45 You can set the answering machine to start playing your greeting message after 3 to 8 rings or ECONOMY. The default ring delay is 5. Press M in idle mode, scroll : to ANSWER MACHINE and press mSELECT, scroll : to SETTINGS and press mSELECT, press mSELECT to enter RING DELAY. Scroll : to your desired ring delay setting (3 to 8 rings or ECONOMY) and press mSELECT to confirm. • A validation tone is emitted and the screen returns to previous menu. Tip Economy mode can save you the cost of a long-distance call when you check your messages remotely. If there are new messages in your answering machine, the outgoing message will start playing after 3 rings. If there are no new messages, the outgoing message will be played after 5 rings. Hence, if you want to check if you have any messages without incurring call charges, you can hang up the call after the 4th ring. 10.6.2 Remote Control Access If you are far away from home and want to check the messages on your answering machine, you can make use of the remote access feature to check your messages using another phone. Once you dial your home number from any other phone and enter the remote access code*, you will be able to obtain the messages on your answering machine. The keypad on the phone you use to dial acts like the functions on your answering machine where you can play or delete messages, turn your answering machine on or off, etc. Note This feature is deactivated by default. * Remote access code (which is the same as your master PIN code) prevents any unauthorised remote access of your answering machine. See chapter 10.6.2.2 for more information. 10.6.2.1 Activate/Deactivate Remote Access Press M in idle mode, scroll : to ANSWER MACHINE and press mSELECT, scroll : to SETTINGS and press mSELECT, scroll : to REMOTE ACCESS and press mSELECT. Scroll : to ACTIVATE or DEACTIVATE and press mSELECT to confirm. • A validation tone is emitted and the screen returns to previous menu. 1 2 1 2 ID555_IFU_US_EN.book Page 45 Thursday, November 27, 2008 11:00 AM

10.6.2.2 Controlling the Answering Machine from an external call From another phone, dial home. • The answering machine answers and starts playing your greeting message. Within 8 seconds, press # key on the phone you use to dial and enter the remote access code (same as your master PIN code). • If the remote access code is incorrect, an error tone is emitted. Enter the access code again until you get the correct number. • If you did not enter the remote access code within 10 seconds, the answering machine will drop the line immediately. • If the remote access code (same as your master PIN code) is correct, you will hear a validation tone. • New messages (if any), will be played automatically and stop when there are no more new messages. Note If there are no new messages, the answering machine will not play any messages. The following table indicates how to access the below features during remote access procedure: 10.7 Call Screening 10.7.1 Call screening on handset If Handset call screening is set to ON, you can hear incoming messages via the handset speaker and decide whether or not to take the call. To take the call, press r. This feature is deactivated by default. 1 2 Press To 1 Press once to replay the current message or twice to go to previous message 2 Play old messages 3 Go to next message 6 Delete current message 7 Turn on the answering machine 8 Stop current message playback 9 Turn off the answering machine # Enter the remote access code if the answering machine is on and outgoing message is playing ID555_IFU_US_EN.book Page 46 Thursday, November 27, 2008 11:00 AM

47 Press M in idle mode, scroll : to ANSWER MACHINE and press mSELECT, scroll : to SETTINGS and press mSELECT, scroll : to HS SCREENING and press mSELECT. Scroll : to ON or OFF and press mSELECT. • A validation tone is emitted and the screen returns to previous menu. 10.7.2 Call screening on base You can use + and - to adjust the speaker's volume during call screening. The lowest volume level turns call screening off. 10.7.3 Set Voice Language This menu allows you to change the language of the predefined outgoing message. The availability of this menu and the language options available are country dependent. Press M in idle mode, scroll : to ANSWER MACHINE and press mSELECT, scroll : to SETTINGS and press mSELECT, scroll : to VOICE LANGUAGE and press mSELECT. • The current selected language is highlighted. Scroll : to your preferred language and press mSELECT to confirm. • A validation tone is emitted and the screen returns to previous menu. 1 2 1 2 ID555_IFU_US_EN.book Page 47 Thursday, November 27, 2008 11:00 AM

Display • Progressive LCD backlight General telephone features • Dual mode caller name & number identification • 15 polyphonic ringer melodies Phonebook list, Redial list and Call log • Phonebook list with 200 entries • Redial list with 20 entries • Call log with 50 entries Battery • 1 Li-ion polymer 500mAh battery Radio specifications • Frequence Band: 1880 - 1900 MHz • Maximum output power: 250 mW Power Consumption • Power consumption at idle mode: around 800mW Weight and dimensions • Handset: 74 grams • 144 x 13 x 43 mm (H x D x W) • Base: 143 grams • 70 x 85 x 128 mm (H x D x W) Temperature range • Operation: Between 0 and 35º C (32 to 95º F). • Storage: Between -20 and 45º C (-4 to 113º F). Relative humidity • Operation: Up to 95% at 40°C • Storage: Up to 95% at 40°C ID555_IFU_US_EN.book Page 48 Thursday, November 27, 2008 11:00 AM

49 12 Frequently asked questions www.philips.com/support In this chapter, you will find the most frequently asked questions and answers about your phone. Connection The handset does not switch on! • Charge the batteries: Put the handset on the base station to charge. After a few moments, the phone will switch on. The handset does not charge! • Check charger connections. icon is not blinking during charge! • Battery is full: There is no need to charge the battery. • Bad battery contact: Adjust the handset slightly. • Dirty contact: Clean the batteries contact with a dry cloth. • Wrong batteries installed: Use only ALi-ion rechargeable battery supplied with your unit There could be risk of battery leakage if you use alkaline batteries or other battery types. Communication is lost during a call! • Charge the battery • Move closer to the base station. The phone is "Out of range"! • Move closer to the base station. WARNING BATT. is displayed on handset! • Use only Li-ion rechargeable battery supplied with your unit. There could be risk of battery leakage if you use alkaline batteries or other battery types. Set-up SEARCHING... is displayed on handset and icon is blinking! • Move closer to the base station. • Make sure that your base station is on. • Reset your unit and restart handset registration (see “Registration” on page 36). Sound Handset does not ring! Check that the RING VOLUME is not set to off, and make sure icon is ID555_IFU_US_EN.book Page 49 Thursday, November 27, 2008 11:00 AM

not displayed on the screen (see “Set the Ring Volume” in chapter 7.2.1). Caller cannot hear me at all! Microphone may be muted: During a call, press b. There’s no dialing tone! • No power: Check the connections. • Batteries are empty: Charge the batteries. • Move closer to the base station. • Wrong line cable used: Use the line cable provided. • Line adaptor is required: Connect the line adaptor to the line cord. Caller cannot hear me clearly! • Move closer to the base station. • Move the base station at least one metre away from any electronic appliances. Frequent noise interference on my radio or television! • Move the base station as far away as possible from the electrical appliances. Product behavior Keypad does not work! • Unlock your keypad: Long press * in idle mode. The handset warms up when making a long call! • This is a normal behavior. The handset consumes energy while calling. The handset cannot be registered to the base station! • Maximum number of handsets (5) has been reached. To register a new handset, unregister an existing handset. • Remove and replace the handset batteries. • Try again by disconnecting and connecting the base station power supply and follow the procedure to register a handset. • Make sure that you have entered the correct PIN code. If you have not changed it, by default it is 0000. Caller’s number is not displayed! • Service is not activated: Check your subscription with your network operator. I cannot change the settings of my voice mail • Operator voice mail is managed by your operator and not the phone itself. Please contact your operator should you want to change the settings. Poor audio quality and the antenna icon is blinking! • The indoor and outdoor range of the phone is up to 50 metres and 300 metres respectively. When the handset moves beyond the operation range, the antenna icon will blink. ID555_IFU_US_EN.book Page 50 Thursday, November 27, 2008 11:00 AM

51 My handset keeps going into idle mode! • If there are no key presses for 30 seconds, the handset will automatically return to idle mode. It will also return to idle mode automatically when you place the handset back on the base station. Phonebook entry cannot be stored and MEMORY FULL is displayed! • Delete an entry to free memory before saving your contact again. The Master PIN code is wrong! • The default master PIN is 0000. • If it has been changed before, and you cannot remember the new one, reset the handset to revert to the default master PIN code (see “Reset Unit” in chapter 9.7). The answering machine does not record messages! • Memory is full: Delete your old messages. • The ANSWER ONLY mode has been activated. Deactivate ANSWER ONLY and activate ANSWER & REC. mode (see “Set the Answer mode” in chapter 10.3). Remote control access does not work! • Activate Remote Control Access (see “Remote Control Access” in chapter 10.6.2). The phone hangs up during remote access! • You have taken more than 8 seconds to enter the Master PIN code. Enter the code again within 8 seconds. Answering machine stops before the recording is finished! • Memory is full: Delete your old messages. ID555_IFU_US_EN.book Page 51 Thursday, November 27, 2008 11:00 AM

Answer a call 21 Answer an external call 28 Answering Machine mode 43 Auto Answer 31 C Call Barring 35 Call in progress 22 Call log 20, 27 Call Screening 46 Call waiting 23 Charge battery 16 Clock and Alarm 32 Conference call 29 Connect base station 15 Contrast 31 D Date and time 32 Default settings 40 Delete a call list entry 27 Delete a phonebook entry 25 Delete a redial number 26 Delete call list 27 Delete redial list 26 Dial Mode 39 Direct dialing 20 Display icons 13 E Edit a phonebook entry 24 End a call 21 F First ring 39 H Handset Name 30 Handset Tones 30 Handsfree answering 21 I Install battery 16 Install phone 15 Intercom 28 K Key Tone 30 Keypad lock/unlock 22 L Language 31 LED indicator 14 Loudspeaker mode 23 Loudspeaker volume 23 M Make a call 20 Master PIN 35 Menu structure 17 Mute 22 O Overview of the base station 14 Overview of your phone 11 P Page 42 Paging 29 ID555_IFU_US_EN.book Page 52 Thursday, November 27, 2008 11:00 AM

Phonebook 21, 24 Predialing 20 R Recall time 39 Recycling and disposal 5, 8 Redial list 20, 26 Registration 36 Remote Control Access 45 Reset Unit 37 Ring Delay 44 Ring Melody 30 Ring Volume 30 S Save a redial number 26 Set area code 38 Store a contact 24 Switch calls 29 Switch handset on/off 22 T Telephone answering machine 41 Text or number entry 22 U Unmute 22 Unregister 37 V Voice Language 47 Voice mail 24, 25 Volume 22 ID555_IFU_US_EN.book Page 53 Thursday, November 27, 2008 11:00 AM

All rights reserved Reproduction in whole or in part is prohibited without the written consent of the copyright owner Document number: 3111 285 48871 (US-EN) ID555_IFU_cover_back.fm Page 56 Thursday, November 27, 2008 4:59 PM Printed in China