VIORE LC22VH55 Operating Instructions Manual

LC22VHS5 AIR (TV)/CABLE MODE SELECTION The Air/CABLE menu option is set to the "CABLE" (Cable Television) mode at the factory. If you want to use an antenna for the built-in TV tuner, this menu option must be set to the "Air" mode. Please refer to "6. Channel MENU" in page 14 of this manual for the details. PARA PREGUNTAS O APOYO TECNiCO Please call: / Favor de llamar al: 1 Q77 77=2 4A_O (USA/CANADA/ Please do not return this TV to the store Per Favor NO Regrese este Televisor a la Tienda

Contents Safety and warnings ...................................................................................... 2-4 Introduction ................................................................................................. 5 Installation .................................................................................................. 6-9 Remote Control .......................................................................................... 10 Operation .......................................................................................................... 14 Trouble Shooting .......................................................................................... 15

ND WARNINGS IMPORTANT SAFETY INSTRUCTION 1.Read these safety instructions. 2.Keep these safety instructions. 3.tIeed all warnings. 4.Follow all safety instructions. 5.Do not use this apparatus near water. 6.Clean only with dry cloth. 7.Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 8.Do not install near any heat sources such as radiators, stoves, or other apparatus {including amplifiers)that produce heat. 9.Protect the power cord from being walked on or pinched particularly at power outlets, and the point where they exit from the apparatus. 10.Only use attachments/accessories specified by the manufacturer. 11.Unplug this apparatus during lightning storms or when unused for long periods of time. 12.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 13.Apparatus must not be exposed to dripping or splashing and no objects filled with liquids, such as vases, should be placed on the apparatus. CAUTION TO REDUCE TIlE RISK OF ELECTRIC SttOCK, DO NOT REMOVE COVER (OR BACK).NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. j_lk The symbol indicates that dangerous voltages constitming a risk of electric shock are present within this unit. The symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit. WARNING: To prevent fire or shock hazard, do not expose this appliance to rain or moisture. -2-

of this television receiver. Do not remove tbe cabinet back fl-om your set. Refer se_wicing to qualified service personnel. To prevent fire or electrical sbock hazard, do not expose tbe television receiver to rain or moisture. Do not drop or push objects into tbe television cabinet slots or openings. Never spill any kind of liquid on tile television receive*-. Do not block the ventilation boles in the back cover. Adequate ventilation is essential to prevent t_dlure of electrical components. Do not trap tile power supply cord under tile television rcceiveE Never stand on, lean on, or suddenly push the television or its stand. You should pay special attention to children. Serious injury may result if it t_llls. Do not place your television oil an unstable cart, stand, shelf or table. Serious injury to an individual, and damage to tile television, may result if it falls. Wben the television receiver is not used for an extended period of time, it is advisable to disconnect tile AC power cord from tile AC outlet. Avoid exposing the television receiver to direct sunlight and other sources of heat. Do not stand the television receiver directly on other products which give offbeat, e.g. video cassette players and audio amplifiers. Do not place naked flame sources, sucb as lighted candles on tile televi sion. If the television is to be built into a compartment or similar enclosure, the minimum distances must be maintained. Heat build-up can reduce the service life of your television, and can also be dangerous. -3-

this TV. To enjoy your product from the very beginning, read this manual carcfldly and keep it handy for easy reference. INSTALLATION • Locate the TV in the worn where light does not strike the screen directly. • Total darkness or a reflection on the picture screen can cause eyestrain. Soft and indirect lighting is recommended for comf\_rtable viewing. • Allow enough space between the TV and the wall to permit ventilation. • A'_oid extremely warm locations to prevent possible damage to the cabinet or premature component failure. a, This TV can be connected to AC 100-240 Volts. 50/60 ltz. Never connect to a DC supply or any other power supply. • Do not cover the ventilation openings when using the TV. CAUT1ON television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio TV technician for help. Shield cables must be used with this unit to ensure compliance with the Class B FCC limits. Never tamper with any components inside the TV. or any other adjustment controls not mentioned in this manual. All LCD-TVs are high voltage instruments. When you clean up dust or water drops on the LCD PANEL or CABINET. the power cord should be pulled out from the receptacle, then wipe the TV with a dry soft cloth. During thunder and lighting, unplug the power cord and antenna cord to prevent damage to your TV. All repairs to this TV should only be pe*i\)ri_led by qualified TV service personnel. Earthing connection--- The apparatus shall be connected to MAINS socket outlet with a protective earthing connection o MAINS plug or appliance coupler of the apparatus is used as disconnect device, it should remains readily opembleo Warning: Change or modifications to this unit not expressly by the part responsible fi)r compliance could void the user's authority to operate the Equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmfill interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmfill interference will not occur in a particular installation. If this equipment does cause harmflll intel_'erence to radio or _4_

system NTSC/I_SLiSECAM Cable :1- 135/Air: 2-69(ATV&DTV) 65W AC 100V-240V 50i60tlz 2x3W xl xl xl xl xl x2 Composite Video Input > 350 Video Input > 400 YCb(Pb)Cr(Pr) > 400 -5-

............................ s--, l\t) \J 1 : Remote control sensor. 2: IndicatorLED: GREEN @ POWERON. RED O STANDBY. 3: Keyboard 4: Power: Press this button to turn the unit ON from STANDBY mode. Press it again to turn the set back to STANDBY. \ ' i SOCRtI _ou_cE i i .... i \. vol \_ vol !. SOURCE: Display the inpilt som-ce menm 2. MENU: Display main MENU. 3. Clf+/CH- In TV mode, press "Ctlq " or "C}I-" to change the channel up and down. In MENU mode, press "CII!" or "CII-" to select items . In standby mode, press "CIt! " or "CIt-" to turn on the TV. 4. VOL+/VOL- Adjust sound level. In MENU mode, press "VOL_ " or "VOL-" to actiust the item that you selected. All the terminals are(from left to right): AC POWER SOCKET, HDMI input,VGA ,PC AUDIO input, AV, S-VIDEO,Rear Audio input, YPbPr input, Coaxial SPD1F OUTPUT, ANTENNA SOCKET, Note: I.AV,S-VIDEO and YPbPr share the Rear Audio input channel. 2. When HDMI port get DVI signal,the PC Audio channel will change to receive the audio from HDMI port. -6-

2.Connect the power cord. 3.Power on the TV, switch to VGA mode. 4.Power on the VGA. This sequence is very important. PRESET MODE RESOLUTION V.Freq.(Hz) H.Freq.(KHz) 1 720*400 70 31.47 2 640*480 60 31.47 3 640*480 75 37.50 4 800*600 60 37.88 5 800*600 75 46.88 6 1024"768 60 48.36 7 1024"768 70 56.48 8 1024"768 75 60.02 9 1280"1024 60 63.98 10 1280"1024 75 80.00 -7-

+++++++_NNA +i +++ii+iiiii+++++++++iiiiii+iii+i+iiiiiiiiiiiiiii++, o o o o _;1[ , I1+ : L: Plug ANT 75_! \__LEAD FEED ER(300tl) I Adaptor (NOT SUPPLIED) '_ An outdoor antenna An indoor antenna CATV net ....................................................................... L ............................................................................................................................................................ Loosen the screws Insert the feeder in Wires Tighten the screws Note: Aerial connections:lE( (female). Input impendance:75 t_ unbalanced.

one group of AV ,one group of S-Video,one group of YPbPr f5r convenient connection to VCR,DVD or other video equipment. Please refer to the owner s lrmnual of the equipment to be connected as well. You can use the input terminals on TV set rear as follows. @ 1_) atl(Jil) lmnlnai @ i @ q,,l_t),l_ @ _ ellm_ (,iael,) (R) Red(a_di,, R,,r Pr) %[DLO I {)[+IpMI NI with *l pI)PI q _7 lcl minal _22; % [lJtl) 1]()1 [pMI NI lliih SPDII: Inplli ierm inal .................................................................................................................. _ _;;: _L:. To.,,[ \ I I1171 ) R 17(71) R I) 17 R It can be connected to the following appliances: VCR, multi disc player, DVD, camcorder, video game or stereo system, etc ..... YPbPr can support these video formats:480i,576i,480p,576p,720p,1080i,1080p, _9_

1. Remove the battery cover. 2. Inserting the 2 AAA 1.5V batteries making sure the polarity ( _ or -) of the batteries matches the polarity marks inside the unit 3. Mount the battery cover. Replace with new batteries when the TV set begins to show the following symptoms: Operation is unsteady or erratic. Sometimes the TV set does not timction with Remote Control Unit. Remark: 1) Alkaline Battery Recommended. 2) Remove batteries when they are exhausted or if the remote control is not to be used t%r long time. 1 :POWER To set the TV standby or on. 2:NUMBER KEY: For direct access to program. 3:MENU To display TV menu or to return to the previous nlenu. 4: CURSOR To move within the menu. 5: EXIT Used to exit ulenu. 6: VOL+/- To adjust sound level. 7: P.M To switch picture mode. 8: MTS/SAP Switch the sound stereo, SAP and mono. 9: SLEEP Set time to turn offtheTV. 10:V-(2HIP Setting the V-CttlP level control. 1 I:MUTE To disable or enable the sound. 12: RECALL To access the previously viewed program. 13 : SOURCE To display or exit TV input source menu. 14: ENTER Confirms selection. 15: TV DISPLAY Displays/removes the program Information 16:S.M To switch sound mode. 17:(2 H+/C H- To access tile next or previous Program. 18: ASPECT To change picture aspect. 19: CC Enable or disable the CC function. 20:(21| LIST: Used to display the channel list 21 :FAV: Used to access your favourite channels in digital TV mode. 22:EPG: Display all the information of DTV programs. 23.11DMI: ttot key directly go to ttDMI source. 24:SVIDEO: ttot key directly go to SVIDEO source. 25:TV: ttot key directly go to TV source. 26:AV: tiot key directly go to AV source. 27: YPbPr: tiot key directly go to YPbPr source. 28: VGA: ttot key directly go to VGA source. 29: PAGE DOWN/PAGE UP In EPG mode, use this key to page up/down the EPG infornlation. 30.COLOR KEYS: Reserved keys -I0-

is PICTURE MENU. You can adjust picture effect here, such as contrast, brightness, etc. Press VA. to select, press _l _ to adjust, press MENU to exit. 3.TIMER MENU The third item of the MENU is TIMER MENU. You can adjust time here. Press 'V"A to select, press 4 _ to adjust, press MEN U to exit. Note: If you want to adjust contrast, brightness, color, and sharpness , the picture mode must return to "personal" status. 2.AUDIO menu The second item of the MENU is AUDIO MENU. You can adjust sound here. PressVA to select, press _1 !_ to adjust, press MENU to exit. 1).SLEEPTIMER: adjust this item, you can set the sleep timer. Note: The item of Time zone, the item of Daylight Saving Time and the item of clock are available in ATSC program 4. SETUP MENU The forth item of the MENU is SETUP MENU. You can setup system here. Press v,6. to select, press "_1_ to adjust, press MENU to exit. Note: The item of Audio language is available in ATSC program. Note: Restore Default: Reset allthe settings to default value.

is V-CfIIP MENU. You can setup Parental Control here. Press V A to select, press ,_ 1_ to adjust, press MENU to exit. Parent control: input the password, itwill go into Parental Control menu. Factory default password is 6666. (1).Ii-Pos:Adjust the horizontal position of the screen. (2).V-Pos:Adjust the vertical position of the screen. (3).Clock: Fine tune the screen width. (4).Phase: Fine tune the phase of the screen. Usually don't adjust this item. (5).Auto: Auto adjust to fit the screen. 2). Closed Caption: switch close caption mode. PressT A button to select Closed Caption ,Press button, the screen will display as follow: 5.! .Input the correct password ,the screen will display as follow: 1). Change Password: Press I_"button, the screen will display as follow: (1):Advanced selection: only ATSC program is available. (2):Option:Used to edit CC font. Press _ button, the screen will display as follow: 1).New password: Input the new password 2).Confirm password: Input the new password again NOTE: Only ATSC program is available. -12-

options can be adjusted. 5.3 US: Press _ button, the screen will displayas follow: I):TV: Press _. button, the screen will display as follow: 2).M PAA:switch the movie-rating control level: N/A, G,PG, PG- 13,R,N C- 17,X. Descriplion G Gener d mdiences, All Ages kdmi_*ed P_r_nt d Guid race suggesled Some m kleria] mk 5 no* be PG Suitable lk)r children P_ren/s strongl} c miioned goi_le m klerial ink} be Age PG-13 InkppropriaIel_)rchildrenunderl3 Res{ric{ U nder 17 requires kccomp m}mg p krenl or aduh R guardian( kge \aries in some jurisdictions) NC 17 No onelTandunderadnli_ed X X is morderrtting{h_tisunifiedx_ilhNC 17bu_mk} be enc od ed in file d kl k o f ord er 11]o_ ies 5.4 Canada: Press 1_ button, the screen will be displayed as follow: L (Ad*llt langilage) I'V-Y {All cllJldlell) I'VY ?(Dil ect _o _*_gges_ed order children) r V-CJ(CJeneral lge audJence/ rv.pG_p_ emal CJuida,,ce suggested) rvl 4IPalel,_s s_,o,lgly camJo,,ed) rWMA/Matu, e audience only) x x x x x x x x x dialog) x x And use ENTER key to switch lock," unlock Parental Control feature. 1): Canada English: switch the english rating control IevcI:E,C,C8 ! ,G,PG,14 ! ,18 !. Exempt: lncltldes news, sports, documents and othm ]nt%rmation programming: talk shows, mtlsic videos, and variety programming Children: Intended tor younger children under the age of 8 years. Pays carettd attention to themes thai cotlld threaten their sense of sectlrityand well being Children over 8 years old: Contains no portrayal of violence as the preterred, acceptable, or onl 5 x_a} to resolve conf]ict; nor encotlr Eg_ children to hnhne dangerotls acts ah ich the? ma 3 wee on the screen Ag General: Considered acceptable Wr all age grotlps, Appropr{ Ere viewing for me entire tamily, contains very lit{le violence, physical, verbal or emotional Parental Guidance: Intended tor a general mdience, but may not be stdtable tot younger children {under the age ot8) because h cotdd contain controversial themes or isst_es O_er 14 Years: Cotdd contain themes *_here _ iolence is one of the dominant e]elnents of tile stor}line BUt it must be integral to the devel opment of plot or char rater gangtmge usage cotdd be profane and nt_dhy, present within the context of theme I 8 Adults: Intended tor viewers 18 years arid older and might contain depictions of violence, which while related to the development of plot, char rater or themes, are intended tot adult viewing Could contain graph ic langt_age and portrayals of secretary and nt_dhy @ E C C8 (i PG 14 -13-

into the plol in a htmlorotls or unrealistic manner 8arts General but inadvisable tk>r young children :May be viewed by a wide ptlblic audience, but could contain scenes disttu bing to children under 8 who cannot distinguish between imaginary and real sittlalions Recommended {or viewing with parch 13ans Over 13 years: Could contain scenes ot treqtlenl violent scenes and in lense violence ]6ans Over 16 years: Cotl]d contain {reqtlenl violem scenes and violence 1Sans Over 18 years: Only tor adult viewing Cotdd contain {reqtlenl violenl scenes and extreme violence 5.5 RRT setting: inATSC digital TV mode, it could be adjusted 5.6 Reset RRT: Press _ button, the screen will be displayed as follow: 1). Air,'Cable: select Air TV signal and cable TV signal. 2). Auto Scan: If it's the first time you use the TV. you should scan all the TV channels first, press the _ button to confirm, you will see below n]enu : A: Start to scan: press the _ button to confirm, you will see below menu which indicates auto search is in process. 6. Channel MENU The sixth item of the MENU is Channel MENU. You can adjust digital and analoge TV Channel . Press V A to move, press _ to adjust here. 3). Favorite: Press _ _ button to choose/delete the favorite channel . 4). Showittide: Press _1_ button to display or hide currently channel. 5). Channel NO. :Display the currently channel number. 6). Channel lane: Press _.'r button to edit currently channel nanle. 7). DTV signal: Display DTV signal intension. It can't be selected and adjusted. _14_

system Normal Picture Mute connections are not correct) Power cord is not inserted Contrast and brightness,'volume No picture Mute setup Press standby key on the remote control for inspecting ,OlO on -ol ..... Picture _ _ Normal audio retune channel breaking up or weak o o,ou . .... The LCDTV panel is built with very high precision technology giving you fine picture details in vibrant color. Occasionally, a few non-active pixels may appear on the screen as a fixed point of red, green, blue, black or white. Please note this does not affect the performance of the product. -15-