Philips 14PT1582 User Manual Manual

• Place TV set on a solid base (e.g. a TV/Video cabinet) • Leave at least 5 cm around each side of TV set for ventilation to avoid over-heating. • Do not place TV set near a radiator or other sources of heat. • Do not place TV set where it can be exposed to rain or excessive moisture. Mains Connection • For correct mains voltage, refer to type sticker at the rear of the TV set • Consult your dealer if mains supply is different. Note : This diagram is not representative of the actual plug and socket. Antenna Connections • Connect the aerial plug to the antenna socket ¬ ¬ ¬ ¬ ¬ on the backcover. • Insert the mains plug into a wall socket. Use of Remote Control • Insert correct type of batteries into the compartment. • Ensure the batteries are placed in the right direction. Switching on the set • Press the mains power button to switch on/off the TV. • If the set is on standby mode (indicator is red), press STANDBY button on the remote control to switch on set. INSTALLATION 5 cm 5 cm 5 cm

Equipment such as VCR, Laser disc player, VCD, etc. can be connected to the video and audio (AV) sockets at the rear of the TV. Switch off mains power of the TV and equipment before making any connections. Connection for Playback • Connect the Video Output socket of the VCR/laser dissc player to the AV “in” socket at the rear of the TV to playback programmes. Connection for recording 1. From the TV channel you are watching • Connecct input sockets of the VCR to the Monitor “out” sockets at the rear of the TV to do recording. 2. From one VCR to another VCR • Connect the sockets of the VCR which you wish to record from to the Input sockets at the rear of the TV. • Connect the sockets of the receiving VCR to the Monitor “out” sockets at the rear of the TV. VIDEO AUDIO out in VIDEO AUDIO out in VIDEO AUDIO out in VCR OR Laser disc player VCR VCR 1 VCR 2

14PT1582 20PT1582 1. Mains Power button Switch mains power on or off. 2. Standby light indicator Indicate red light when standby mode is activated. 3. Remote Sensor Aim remote control handset at remote sensor when operating the TV. 4. Headphone socket Connect headphone jack to socket for personal listening. 5. AV “in” sockets Connect to Video “out” and Audio “out” sockets of VCR laser disc player, etc. 6. Volume ˝ ˝ ˝ ˝ ˝ / ˙ ˙ ˙ ˙ ˙ button Adjust sound volume louder/softer. 7. Channel ¸ ¸ ¸ ¸ ¸ / ˚ ˚ ˚ ˚ ˚ button Select channel in ascending/descending order. Note : You can enter the main menu by pressing both the Volume ˝ ˝ ˝ ˝ ˝ / ˙ ˙ ˙ ˙ ˙ buttons at the same time. Press Channel ¸ ¸ ¸ ¸ ¸ / ˚ ˚ ˚ ˚ ˚ button to select items on the menu. Press Volume ˝ ˝ ˝ ˝ ˝ / ˙ ˙ ˙ ˙ ˙ button to activate sub-menu. 1 3 4 5 2 6 7 n VIDEO AUDIO VOLUME L K ˙ ˝ ˚ ¸ CHANNEL ˚ ¸ INSTALL / MENU 3 n VIDEO AUDIO VOLUME L K ˙ ˝ ˚ ¸ CHANNEL ˚ ¸ INSTALL / MENU 3 21PT1582 1 3 4 5 2 6 7

2 3 5 6 7 8 9 1. STANDBY Switch off set temporarily to standby mode. (The red light indicator lights up when set is on standby mode). To switch on set, press STANDBY or any DIGIT button. 2. AV Selects AV channels. 3. OSD (On-Screen Display) – Displays channel number and sound transmission mode. – Allows you to exit menu from screen. 4. DIGIT (0 - 9) Allows you select a channel. For a 2-digit channel number, the second digit must be entered before the “ – “ sign disappears. 5. SMART SOUND Allows you to access 4 different types of sound settings and select your preferred setting. 6. MENU To display or exit menu from screen. 7. CURSOR UP Allows you to select the next item on the menu. 8. CURSOR LEFT Allows you to access the sub-menus and adjust the settings. 9. VOLUME + / – Increases / decreases volume. 10. MUTE Mutes sound. To restore sound, press button again. 11. TELETEXT Not applicable. 11 10 4 1

12. SLEEPTIMER Allows you to select a time period after which the set will switch to standby mode automatically. You can set the timer from OFF mode up to a maximum of 240 minutes. 13. SMART PICTURE Allows you to access 4 different types of picture settings and select your preferred setting. 14. INCREDIBLE SURROUND Not applicable. 15. CURSOR RIGHT Allows you to access the sub-menus and adjust the settings. 16. CURSOR DOWN Allows you to select the next item on the menu. 17. CHANNEL + / – Allows you to select channel in ascending or descending order. 18. 4 4 4 4 4 Not applicable for 4 4 4 4 4 feature. 19. SURF / ALTERNATE CHANNEL – When surf mode is activated through the main menu, it allows you to select up to a maximum of 8 channels and view quickly the selected channels . – It also allows you to alternate between the last viewed channel and the present channel if alternate channel mode is activated. 12 13 15 16 17 18 19 14

OR LANGUAGE ENGLISH AUTO STORE É É É É É SWAP É É É É É BLUE MUTE OFF INSTALLATION É É É É É BRIGHTNESS IIIII S S S S S S S S 28 COLOUR IIII S S S S S S S S S S 18 CONTRAST IIIIIIII S S S S S S 38 LANGUAGE ENGLISH AUTO STORE É É É É É SWAP É É É É É SKIP É É É É É AUTOSTORE 050 MHZ CHANNEL 1 LANGUAGE ENGLISH AUTO STORE É É É É É SWAP É É É É É SKIP É É É É É MENU OSD SURF A/CH BLUE MUTE OFF INSTALLATION É É É É É BRIGHTNESS IIIII S S S S S S S S 28 COLOUR IIII S S S S S S S S S S 18 Selecting the language and Automatic Tuning Press button Result on TV Screen 1. Enter main menu. 2. Select INSTALLATION. 3. Enter installation menu. LANGUAGE option is highlighted. 4. Select your desired language. 5. Select AUTO STORE. 6. Start automatic tuning. 7. After tuning is completed, the installation menu will appear. 8. Exit menu from screen. 2 e h f 4 b 1 2 3 4 5 6 7 8 9 0 CH MENU INC. SURR. SLEEP OSD AV SMART SMART ± ` A/CH SURF A H

É É É É FINE TUNE S S S S S SI S S S S S S SELECTION OF TV SYSTEM « « « LANGUAGE ENGLISH AUTO STORE É É É É É SWAP É É É É É MENU INC. SURR. MENU INC. SURR. MENU INC. SURR. SYSTEM AUTO SEARCH 044 MHZÉ É É É É FINE TUNE S S S S S SI S S S S S S (Applicable to certain models only) This feature allows you to select your desired TV system. If AUTO is selected, the respective colour system will be automatically selected according to the transmission system. Note : Select another system if reception is poor at AUTO mode. 1. Enter main menu. 2. Select INSTALLATION. 3. Enter installation mode. Press button Result on TV Screen 4. Press button repeatedly until MANUAL is selected. 5. Enter system menu. 6. Press button repeatedly to cycle through the respective transmission system and select the desired system. 7. Select STORE. 8. Store system. 9. Exit menu from screen. OSD 2 e h f 4 b 1 2 3 4 5 6 7 8 9 0 CH MENU INC. SURR. SLEEP OSD AV SMART SMART ± ` A/CH SURF A H FINE TUNE S S S S S SI S S S S S S CHANNEL 8 STORED

É É É É É FINE TUNE ❙ ❙ ❙ ❙ ❙ ❙I ❙ ❙ ❙ ❙ ❙ ❙ SYSTEM AUTO SEARCH 055 MHZ É É É É É FINE TUNE ❙ ❙ ❙ ❙ ❙ ❙I❙ ❙ ❙ ❙ ❙ ❙ CHANNEL 2 SEARCH 055 MHZ É É É É É FINE TUNE ❙ ❙ ❙ ❙ ❙ ❙I ❙ ❙ ❙ ❙ ❙ ❙ CHANNEL 8 STORE É É É É É FINE TUNE ❙ ❙ ❙ ❙ ❙ ❙I ❙ ❙ ❙ ❙ ❙ ❙ CHANNEL 8 STORED 1 2 3 4 5 6 7 8 9 0 OSD MANUAL TUNING OF TV CHANNELS Manual tuning of channels allows you to select your preferred channel number for every available programme. 1. Enter main menu. 2. Select INSTALLATION. 3. Enter installation mode. Press button Result on TV Screen 4. Press button repeatedly until MANUAL is selected. 5. Enter manual tuning menu. 6. Select SEARCH. 7. Start searching for a transmitting channel. Searching stops once a transmitting channel is found. 8. Press button repeatedly until CHANNEL is selected. 9. Key in the desired channel number. 10. Select STORE. 11. Store tuned channel. To continue searching for the next transmitting channel, repeat steps 7 to 12 again. 12. Exit menu from screen. 2 e h f 4 b 1 2 3 4 5 6 7 8 9 0 CH MENU INC. SURR. SLEEP OSD AV SMART SMART ± ` A/CH SURF A H

This feature allows you to change the channel number to your choice for a particular TV station. 1. Enter main menu. 2. Select INSTALLATION. 3. Enter installation mode. Press button Result on TV Screen 4. Select SWAP. 5. Enter swap menu. 6. Key in the desired channel number you want to exchange from in the FROM column. 7. Select TO. 8. Key in the programme number you want to exchange to in the TO column. 9. Select EXCHANGE. 10. Activate exchange of channels. 11. Exit menu from screen. 2 e h f 4 b 1 2 3 4 5 6 7 8 9 0 CH MENU INC. SURR. SLEEP OSD AV SMART SMART ± ` A/CH SURF A H

This feature allows you to skip channels which have bad or weak TV signal or channels that you do not watch often. Note : Once a channel is skipped, you cannot have access to it by the CH (Channel) + or – button. you can only have access to the channel by the DIGIT (0 - 9) buttons. 1. Enter main menu 2. Select INSTALLATION. 3. Enter installation mode. Press button Result on TV Screen 4. Press button repeatedly until SKIP is selected. 5. Enter skip menu. 6. Key in the channel to be skipped. 7. Select SKIP. 8. Select YES to skip channel. 9. Exit menu from screen. How to restore skipped channels 1. Repeat steps 1 to 5 as in “Skipping of Channels”. 2. Key in the channel to be restored by the DIGIT (0- 9) button. 3. Select SKIP by the button. 4. Select NO to restore channel. 5. Exit menu from screen by the (OSD) button. CHANNEL 3 SKIP NO CHANNEL 3 SKIP YES CHANNEL DELETED 2 e h f 4 b 1 2 3 4 5 6 7 8 9 0 CH MENU INC. SURR. SLEEP OSD AV SMART SMART ± ` A/CH SURF A H

É É É É FINE TUNE S S S S S SI S S S S S S SYSTEM AUTO SEARCH 044 MHZÉ É É É É FINE TUNE S S S S S SI S S S S S S CHANNEL 8 STORE É É É É É FINE TUNE S S S S S SI S S S S S S CHANNEL 8 STORED FINE TUNING OF TV CHANNELS MENU INC. SURR. 1 2 3 4 5 6 7 8 9 0 SMART SMART ± ` MENU INC. SURR. OSD This feature allows you to adjust the picture reception in area of weak reception. 1. Select the channel 2. Enter main menu. 3. Select INSTALLATION. you want to fine-tune. Press button Result on TV Screen 4. Enter installation mode. 5. Press button repeatedly until MANUAL is selected. 6. Enter fine tune menu. 7. Press button repeatedly until FINE TUNE is selected. 8. Start fine-tuning until desired picture and sound is obtained. 9. Press button repeatedly until STORE is selected. 10. Store last fine-tuned status. 11. Exit menu from screen. 2 e h f 4 b 1 2 3 4 5 6 7 8 9 0 CH MENU INC. SURR. SLEEP OSD AV SMART SMART ± ` A/CH SURF A H SURF A/CH BLUE MUTE OFF INSTALLATION É É É É É BRIGHTNESS IIIII S S S S S S S S 28 COLOUR IIII S S S S S S S S S S 18

The picture and sound menu allow you to make adjustments to the picture and volume level. 1. Press (MENU) button to enter main menu. 2. Use the (CURSOR UP) or (DOWN) button to select the items in the menu. 3. Do the adjustments or activation by the (CURSOR LEFT) or (RIGHT) button. 4. Press (OSD) button to exit menu from screen. MENU OSD Picture menu items Selection Brightness Increase/decrease level Colour Increase/decrease intensity Contrast Increase/decrease level Sharpness Increase/decrease level *Hue Increase/decrease intensity *Colour Temp Choice of 3 settings *Contrast Plus On/Off *Noise Reduce On/Off *4:3 Expand On/Off *Hue Applicable for NTSC programmes only. *Colour Temp Allows you a choice of 3 picture settings namely, NORMAL, WARM or COOL. *Contrast Plus This feature allows you to optimise the total contrast for improved picture clarity. * Noise Reduce Noise Reduce feature helps you to reduce the “noise” (little dots on the picture) from weak signal broadcast. Activating this feature makes a picture disturbed by “noise” clearer and sharper. * 4:3 Expand 4:3 Expand feature allows you to adjust picture with black bar on the top and bottom to fill up more of the screen. It allows you to optimise the picture display on the screen. Sound menu items Selection Volume Increase/decrease level *AVL On/Off *AVL (Auto Volume Leveller) Variation in signal conditions can result in a sudden change in volume during commercial breaks or channel switching. Activating the Auto Volume Leveller feature enables the volume level to remain at a standard volume level. HUE S S S S S SI S S S S S S 21 COL TEMP NORMAL CONTRAST PLUS ON NOISE REDUCE OFF 4:3 EXPAND OFF « BRIGHTNESS IIIIIS S S S S S S S 28 COLOUR IIII S S S S S S S S S S 18 CONTRAST IIIIIIIIS S S S S S 38 SHARPNESS IIIIIIIIS S S S S S 38 HUE S S S S S SI S S S S S S 21 4:3 EXPAND OFF VOLUME IIII S S S S S S S S 28 AVL ON SLEEPTIMER OFF CHILD LOCK É

28 COLOUR IIII S S S S S S S S S S 18 CONTRAST IIIIIIII S S S S S S 38 AVL OFF SLEEPTIMER OFF CHILD LOCK É É É É É CLOCK É É É É É SURF A/CH CHANGE CODE XXX- CHANNEL 2 LOCK NO ACCESS CODE X X X - 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 CONFIRM CODE XXX- CHANNEL 2 LOCK NO ACTIVATING THE CHILD LOCK Lock feature allows you to lock channels which you want to prevent others or your children from watching programmes you deem undesirable. You can choose to lock up all the channels or individual channel (up to a maximum of 5 channels). How to lock channels Press button Result on TV Screen 1. Enter main menu. 2. Press button repeatedly until CHILD LOCK is selected. 3. Enter child lock mode. 4. Key in access code twice to enter child lock menu. Note : Universal access code is 0711. 5. CHANGE CODE is selected. Key in your preferred code (4-digit) if you want to change to a new code. If you do not want to change code, select CHANNEL by the button and proceed to step 7 to lock your desired channels. 6. Key in the new code the second time to confirm change. 2 e h f 4 b 1 2 3 4 5 6 7 8 9 0 CH MENU INC. SURR. SLEEP OSD AV SMART SMART ± ` A/CH SURF A H

Press button Result on TV Screen 7. Select ALL if you choose to lock all the channels. You can also choose to lock individual channel (up to a maximum of 5). 8. Select LOCK. 9. Select YES to activate lock mode. 10. Exit menu from screen. How to unlock channels If you access any locked channel , a message “ACCESS CODE” will appear. To bypass the lock mode, key in your personal access code. Note : If you forget your personal access code, key in the universal code 0711 twice. 1. Repeat step 1 to 4 as in “How to lock channels”. 2. Press button repeatedly until CLEAR ALL is selected if you want to unlock all the channels. Press button to activate unlock mode. 3. If you want only to unlock individual channel, select CHANNEL by the button and key in the channel you want to unlock by the (DIGIT 0 -9) button. 4. Select LOCK by the button. 5. Press button to select NO to activate unlock mode. 6. Exit menu from screen by the (OSD) button. 2 e h f 4 b 1 2 3 4 5 6 7 8 9 0 CH MENU INC. SURR. SLEEP OSD AV SMART SMART ± ` A/CH SURF A H

(Applicable to certain versions only) The Clock feature allows you to set the clock to switch to another channel at a specified time while you are watching another channel or when the TV is on standby mode. Note : For the clock to function, the set must not be switched off. Once the set is switched off, the clock is disabled. Press button Result on TV Screen 1. Enter main menu. 2. Press button repeatedly until CLOCK is selected. 3. Enter clock menu. 4. Set clock. Key in the time you want the clock to start functioning. For example, if the time is 18 : 30, key digit 1 and 8 in the hour column followed by digit 3 and 0 in the minute column. 5. Select TIMER ACTIVE. 6. Select ON to activate clock. 7. Select CHANNEL. 8. Select the channel you want to switch to. 9. Select AT. 10. Key in the time you want the channel to be switched on. 11. Exit from menu. 2 e h f 4 b 1 2 3 4 5 6 7 8 9 0 CH MENU INC. SURR. SLEEP OSD AV SMART SMART ± ` A/CH SURF A H TIMER ACTIVE ON CHANNEL 8 AT 22:30 SLEEPTIMER OFF CHILD LOCK É É É É É CLOCK É É É É É SURF A/CH BLUE MUTE OFF

28 CLOCK SURF A/CH BLUE MUTE OFF INSTALLATION É É É É É BRIGHTNESS IIIII S S S S S S S S 28 ACTIVATING THE SLEEPTIMER / BLUE MUTE Sleeptimer feature This feature allows you to select a time period after which the set will switch to standby mode automatically. You can set the timer from OFF mode up to a maximum of 240 minutes. How to activate the Sleeptimer feature Press button Result on TV Screen 1. Enter main menu. 2. Press button repeatedly until SLEEPTIMER is selected. 3. Press button repeatedly to cycle through the time periods and select the desired time period. 4. Exit menu from screen. Blue Mute feature The TV screen will turn blue when the Blue Mute feature is activated via the main menu. It indicates that there is no signal. How to activate the Blue Mute feature Press button Result on TV Screen 1. Enter main menu. 2. Press button repeatedly until BLUE MUTE is selected. 3. Select ON to activate Blue Mute feature. 4. Exit menu from screen. 2 e h f 4 b 1 2 3 4 5 6 7 8 9 0 CH MENU INC. SURR. SLEEP OSD AV SMART SMART ± ` A/CH SURF A H 2 e h f 4 b 1 2 3 4 5 6 7 8 9 0 CH MENU INC. SURR. SLEEP OSD AV SMART SMART ± ` A/CH SURF A H VOLUME IIII S S S S S S S S 28 AVL ON SLEEPTIMER OFF CHILD LOCK É CLOCK É VOLUME IIII S S S S S S S S 28 AVL ON SLEEPTIMER 15 CHILD LOCK É CLOCK É

This feature allows you to create a surf list. You can select up to a maximum of 8 channels and view quickly the selected channels by the control handset. How to add a channel to the surf list Press button Result on TV Screen 1. Enter main menu. 2. Press button repeatedly until SURF is selected. 3. Select SURF option. After selection of surf option, exit menu from screen by the (OSD) button. 4. Key in the channel number you want to add to the surf list. 5. Add selected channel to the surf list. “ADDED” will appear indicating that the selected channel has been added. Repeat steps 4 and 5 to add more channels to the surf list. How to delete a channel from the surf list 1. Select the channel you want to delete from the surf list by the DIGIT (0 - 9) button. 2. Press the (SURF / A/CH) button to activate deletion of channel. 3. Repeat the above step 1 to 2 if you want to delete more channels from the surf list. How to view channels from the Surf list 1. Press the (SURF / A/CH) button repeatedly to cycle through the channels and select the channel you want to view. 2 e h f 4 b 1 2 3 4 5 6 7 8 9 0 CH MENU INC. SURR. SLEEP OSD AV SMART SMART ± ` A/CH SURF A H

28 COLOUR IIII ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙18 CONTRAST IIIIIIII ❙ ❙ ❙ ❙ ❙ ❙38 USING THE ALTERNATE CHANNEL FEATURE When you are viewing a channel and decide to view the previous channel, use this feature to alternate between the two channels. How to activate the Alternate Channel feature Press button Result on TV Screen 1. Enter main menu. 2. Press button repeatedly until SURF is selected. 3. Select A/CH (Alternate Channel) option. 4. Exit menu from screen. 5. Alternate between the present channel and the previous channel. 2 e h f 4 b 1 2 3 4 5 6 7 8 9 0 CH MENU INC. SURR. SLEEP OSD AV SMART SMART ± ` A/CH SURF A H

Smart Picture Smart Picture offers you a choice of 4 settings – RICH, NATURAL, SOFT and PERSONAL. • Press (SMART PICTURE) button repeatedly to cycle through the 4 settings to select your desired picture setting. Definition of Picture Settings RICH : Emphasizes very vibrant colours. (Suitable for AV mode in brightly-lit condition) NATURAL : Emphasizes natural and original colours. SOFT : Emphasizes warm colours. (Suitable for dimly-lit room condition and gives cinema-like effect when light is switched off) PERSONAL : Settings are set to your preference. Smart Sound Smart Sound offers you a choice of 4 settings – THEATRE, MUSIC, VOICE and NORMAL. • Press (SMART SOUND) button repeatedly to cycle through the 4 settings to select your desired sound setting. Definition of Sound Settings THEATRE : Emphasizes sensation to action and a wider sound ambience. MUSIC : Emphasizes bass frequency making the music dynamic. VOICE : Emphasizes treble frequency making speech clearer. NORMAL : Normal tone (No boosting). SMART ` RICH NATURAL SOFT PERSONAL 2 1 2 3 4 5 6 7 8 9 0 SLEEP OSD AV SMART SMART ± ` 2 1 2 3 4 5 6 7 8 9 0 SLEEP OSD AV SMART SMART ± ` SMART ± THEATRE MUSIC VOICE NORMAL

Safety Disconnect mains plug when : – the red light below the TV screen is flashing continuously. – a bright white line is displayed across the screen. – cleaning the TV screen. Never use abrasive cleaning agents. Use a slight damp chamois leather or soft cloth. – there is a lightning storm. – the set is left unattended for a prolonged period of time. Useful Tips • Do not place your TV set under direct sunlight or heat. • Avoid placing your set (e.g. near the window) where it is likely to be exposed to rain or water. • Do not leave your set on standby mode for a prolonged period of time. Switch off set to allow it to be demagnetise. A demagnetised set supports good picture quality. • Do not shift or move the set around when it is switched on. Uneveness in colour in some parts of the screen may occur. • Never attempt to repair a defective TV yourself. Always consult a skilled service personnel. Before calling Service Make these simple checks before calling for service. Some of these symptoms can easily be rectified if you know what to do. Symptom What you should do Colour patch • Switch off the TV by the mains power button. Wait for 20 (uneveness) minutes before switching on again. • Check the TV is not placed too near speakers or magnetic objects. No power • Check the TV’s AC power cord is plugged into the mains socket. If there is still no power, disconnect plug. Wait for 60 seconds and re-insert plug. Switch on the TV again. No picture • Check the antenna connection at the rear of the TV. • Possible TV station problem. Try another channel. Good picture • Try increasing the volume. but no sound • Check that the sound is not muted. If it is muted, press the (mute) button on the remote control to restore sound. Good sound but poor • Try increasing the contrast and brightness setting. colour or no picture Snowish picture and • Check antenna connection at the rear of the TV. noise Horizontal dotted lines • Possible electrical interference e.g. hairdryer, vacuum cleaner, etc. Switch off appliances. Double images or • Possible poor positioning of antenna. Using a highly “Ghost” images directional antenna may improve reception. TV not responding to • Check life span of batteries of remote control handset. remote control handset • Aim remote control handset directly at remote control sensor lens on the TV. Message “ACCESS CODE” • Key in your personal access code to unlock channel. If you shown on TV. Cannot have forgotten your code, key in the universal code 0711 access to locked channel. twice. For more details, refer to section on “How to unlock channels”. H H H H H

37 cm 51 cm 54 cm Picture tube visible area 34 cm 48 cm 51 cm Audio Output 1 x 3 W 2 x 2 W 2 x 2 W Set dimensions Width 36 cm 50 cm 52 cm Height 36 cm 46 cm 47 cm Depth 37 cm 47 cm 48 cm Nett weight of set 11 kg 18 kg 20 kg TV System Versions 57 59 73 75 PAL B/G x x PAL D/K x x PAL I x x SECAM B/G x SECAM D/K x SECAM K1 x NTSC Playback x x x x PAL 60 Playback x x x x www.philips.com Note For Operating Voltage, Frequency, Power Consumption and Version Number, refer to the type sticker at the rear of the set.