Philips DC156 Quick Start Manual

What’s in the Box? You should find these items upon opening the box. DC156 1 Quick Start Guide 2 User Manual Quick Start Guide User manual 3 1 2 iPOD PROG MENU MUTE OK Remote Control 4 Dock adapters DC156 QSG Eng 2008 6 12 2:28 PM 1

AC power cord 1 2 Connection Connect the speaker wires to the SPEAKERS terminals. Connect the power cord of the system to the AC power outlet. Tip: It is unnecessary to connect the FM pigtail antenna since it is fixed to the main unit. 2 1 DC156 QSG Eng 2008 6 12 2:28 PM 2

In standby mode, press and hold CLOCK/DISPLAY on the remote control set for 2 seconds. Press PROG to select 12-hour or 24-hour display. Press CLOCK/DISPLAY to confirm. ➜The clock digits for the hours flash. Press TUNING 4 ¢ (4 ¢ on the remote control) to set the hours. Press CLOCK/DISPLAY again. ➜The clock digits for the minutes flash. Press TUNING 4 ¢ (4 ¢ on the remote control) to set the minutes. Press CLOCK/DISPLAY to confirm the time. 6 7 1 2 3 4 5 Playing a disc Select CD source. Lift the CD door on the top of the system to open the CD compartment. Insert a disc with the printed side facing up and press down on PULL TO OPEN to close the CD door. PressÉÅto start playback. Press 9 to stop playback. iPOD PROG MENU MUTE OK iPOD PROG MENU MUTE OK Enjoy DC156 QSG Eng 2008 6 12 2:28 PM 3

All rights reserved. http://www.philips.com Tip: Detailed playback features and additional functions are described in the accompanied user manual. 1 2 Select TUNER source. Press PROG on the remote control for more than two seconds to program all available stations in order of waveband. Press PRESET +/- until the desired preset station is displayed Programming and tuning to radio stations 3 Notes for the remote control: – First, select the source you wish to control by pressing one of the source select keys on the remote control (CD or AUX, for example). – Then select the desired function ( 2;, 4, ¢ for example). 1 2 Press PUSH TO OPEN to open the dock. Select the dock adaptor of the correct type and size, and snap it into the dock. Correctly place your iPod in the dock. Press SOURCE repeatedly or DOCK on the set (iPOD on the remote control) to select iPod source. ➜The connected player will play automatically. Playing iPod using the dock 3 4 MIC PUSH TO OPEN DOCK FOR iPOD RO SYSTE M DC15 6 SOURCE DOCK STANDBY-ON REPEAT DBB CD/CD-R/CD-RW COMPATIBLE PRESET iR VOL VOL TUNING Enjoy PDCC-2008 DC156 QSG Eng 2008 6 12 2:28 PM 4