Philips DCB146/05 Quick Start Manual

What’s in the Box? You should find these items upon opening the box. DCB146 1 Quick Start Guide 2 User Manual Quick Start Guide User Manual 3 1 2 Remote Control 4 iPod Adaptors DCB146 QSG E 3/30/10 12 41 1

Connect the power cord of the system to the AC power outlet. Tip: It is unnecessary to connect the DAB/ FM antenna since it is fixed to the main unit. speaker (right) speaker (left) DAB/FM wire antenna AC power cord 2 1 DCB146 QSG E 3/30/10 12 41 2

In standby mode, press and hold DISPLAY/CLOCK on the remote control set for 2 seconds. 6 7 1 2 3 4 5 Playing a disc Select CD source. Lift the CD door on the top of the system to open the CD compartment. Insert a disc with the printed side facing up and press down on PULL TO OPEN to close the CD door. PressÉÅto start playback. Press 9 to stop playback. Press PROG to select 12-hour or 24-hour display. Press DISPLAY/CLOCK to confirm. ➜The clock digits for the hours flash. Press TUNING 4 ¢ (or 4 ¢ on the remote control) to set the hours. Press DISPLAY/CLOCK again. ➜The clock digits for the minutes flash. Press TUNING 4 ¢ (or 4 ¢ on the remote control) to set the minutes. Press DISPLAY/CLOCK to confirm the time. DCB146 QSG E 3/30/10 12 41 3

to select DAB to start an automatic search of available DAB stations. Press 4 / ¢ to change the DAB stations. Tuning to DAB stations 5 Programming and tuning to FM stations Select FM TUNER source. 1 2 Press SCAN for more than two seconds to program all available stations (FM only). Press PRESET +/- ( or 3 / 4 on the remote control ) until the desired preset station is displayed. 3 To access setup options, press MENU then use the navigation control buttons to select. 3 Press OK to confirm a selection. 4 To perform a local scan (in UK ), press briefly SCAN. To perform a full scan (outside UK ), press and hold SCAN. DCB146 QSG E 3/30/10 12 41 4

All rights reserved. http://www.philips.com DCB146_05_QSG_V2.0 Tip: Detailed playback features and additional functions are described in the accompanied user manual. Notes for the remote control: – First, select the source you wish to control by pressing one of the source select keys on the remote control (DISC or AUX, for example). – Then select the desired function ( 2;, 4, ¢ for example). 1 2 Press PUSH TO OPEN to open the dock. Select the dock adaptor of the correct type and size, and snap it into the dock. ➜Each iPod adaptor has its indication to fit a specific iPod. Correctly place your iPod in the dock. Playing iPod using the dock 3 4 MIC PUSH TO OPEN DOCK FOR iPOD RO SYSTE M DCB146 SOURCE DOCK STANDBY-ON CD/CD-R/CD-RW COMPATIBLE PRESET iR VOL VOL TUNING Press SOURCE repeatedly or DOCK on the set (or iPOD on the remote control) to select iPod source. ➜The connected player will play automatically. ➜ The iPod battery will be charged in either normal standby mode or power-on mode. DCB146 QSG E 3/30/10 12 41 5