Visonic SR-730 PG2 Installation Instructions
Text of the manual
D-302414 SR-730 PG2 Installation Instructions
1
SR-730 PG2
Fully Wireless PowerG Outdoor Siren
Installation Instructions
1. INTRODUCTION
The SR-730 PG2 is a fully wireless outdoor siren, designed for
installation in areas in which wiring action is difficult or impossible.
The siren is compatible with PowerG control panels.
Features
Siren and strobe light
D-302414 SR-730 PG2 Installation Instructions
2. INSTALLATION
3
4
1
2
5
6
b
a
7
8
220/110 VAC
9VAC
9VAC
A
B
C
D
E
F
A
A
A
G
H
I
J
1. Open plastic cover screw.
2. Using Philips screwdriver, remove screw and remove cover.
3. Optional step: Hang back unit with a screw on mounting
surface to make the next step (drilling marking) easier.
4. Mark for drilling.
5
D-302414 SR-730 PG2 Installation Instructions
3
5.
Here you determine whether or not to activate the exit – entry beeps, and if enabled,
whether to activate in HOME or AWAY mode.
6.
7.
or
Select between "Disabled", "Disabled _ Home" and "Enabled".
8.
9.
Here you determine whether or not to activate the squawk, and if enabled, whether to
activate the sounde
D-302414 SR-730 PG2 Installation Instructions
5. LOCAL DIAGNOSTICS TEST
Before testing, remove the plastic cover and then open the
battery cover (see Fig. 2).
A. Press the self-test button once and release it; the following
procedure should occur in turn:
The red LED will switch ON and then OFF, the green LED will
switch ON and then OFF, the strobe light
