Philips DVDR3400 Quick Start Manual

Need help? User Manual See the user manual that came with your Philips recorder. Hotline Call 1-888-PHILIPS (1-888-744-5477) for our operators. Online Go to www.philips.com/usasupport. 3 Enjoy Start Playback DVD Player/ Recorder DVDR3400 Connect Set up Enjoy 1 2 3 What’s in the box? DVD Player/ Recorder Remote Control and 2 batteries RF Coaxial Cable Audio/video cable User Manual PLAY/PAUSE 2006 © Philips Consumer Electronics A Division of Philips Electronics North America Corp P.O. Box. 671539 Marietta, GA 30006 0026 All rights reserved. Printed in China 12 NC 3139 245 22141 A Press OPEN/CLOSE on the remote control, load in a disc and close the disc tray. B Press DISC MENU DISC MENU and use up S or down T keys to select a title. C Press PLAY/PAUSE to start playback. D To stop playback, press STOP . Start Recording A Recording from the TV or an external device A Insert a recordable DVD disc in the tray. Types of discs for recording DVD+R DL B Press SOURCE repeatedly to select the source to record from. (eg, TUNER, CAM1, CAM2, DV, EXT1, EXT2 or EXT3.) z To record a TV programme, use P+/- to scroll through the channels, or press 0 -9 to select the channel that you want to record. C Press REC MODE repeatedly to select the mode of recording quality. D Press REC to start recording, press REC again to automatically record 30 minutes. A Recording from the TV or an external device (continued) E To end recording, press STOP . ‘UPDATE’ will be displayed on the recorder. F To playback the recording, press DISC MENU DISC MENU , select the title and press PLAY/PAUSE . B Archiving from a USB device A Insert a recordable DVD disc in the tray. B Connect the USB flash drive into the USB port on the front panel of the recorder. C Press TOOLS TOOLS to access the USB mode. Î Select { Copy to DVD } and press OK . Î The USB content menu appears. Archiving from USB to DVD Directory Copy List Japan trip Bryan Bday My songs Hot Hits Archiving from USB to DVD Directory Copy List Picture1.jpg Picture2.jpg Song1.mp3 NATURE-1.JPG BUTTER-1.JPG P1022500.JPG Music.mp3 MERLIO-1.JPG 1 2 3 4 5 6 7 8 ..\Move up directory Picture2.jpg Music.mp3 1 2 D Select the folder you want and press OK to access the folder/ album. E Create a copy list, highlight the file you want to copy and press SELECT . Î The selected fi les will appear on the right { Copy List } screen. Î To remove the fi le from the copy list, press CLEAR CLEAR . F Once the copy list selection is complete, press REC to start archiving. Î A message will appear. Select OK in the menu and press OK to proceed. REC MODE SOURCE USB TOOLS

Start with the ‘Basic Connection.’ If you have a VCR, follow the instructions for ‘Connection with a VCR or similar device’. R L R L Y PB PR Y PB PR VIDEO (CVBS) COMPONENT VIDEO EXT 2 S-VIDEO (Y/C) VIDEO (CVBS) S-VIDEO (Y/C) AUDIO HDMI COAXIAL R L R L ~ MAINS (DIGITAL AUDIO) INPUT OUTPUT EXT 1 EXT 3 COMPONENT VIDEO AUDIO AUDIO ANTENNA-IN TV-OUT L R Y PB PR COMPONENT VIDEO VIDEO (CVBS) S-VIDEO (Y/C) COAXIAL R L R L (DIGITAL AUDIO) OU OUT 2 OUT 1 AUDIO Television (rear) To antenna or set-up box Philips recorder (rear) R L R L Y PB PR Y PB PR VIDEO (CVBS) COMPONENT VIDEO EXT 2 S-VIDEO (Y/C) VIDEO (CVBS) S-VIDEO (Y/C) AUDIO HDMI COAXIAL R L R L ~ MAINS (DIGITAL AUDIO) INPUT OUTPUT EXT 1 EXT 3 COMPONENT VIDEO AUDIO AUDIO ANTENNA-IN TV-OUT L R R L R VIDEO OUT (CVBS) AUDIO OUT Philips recorder (rear) VCR or similar device (rear) A Follow the steps under ‘Basic Connections’ to before you proceed to step B below. B Use a yellow video cable (not supplied) to connect the VIDEO (CVBS) INPUT jack on this recorder to the yellow VIDEO OUT jack on the VCR. C Use another red and white audio cable (not supplied) to connect the AUDIO INPUT jacks on this recorder to the red and white AUDIO OUT jacks on the VCR. D Connect the power cable from your VCR to an AC power outlet. Note In this setup, the VCR cannot record TV programs. For additional connection diagrams, see the accompanying User Manual. Philips recorder (front panel) A Finding the viewing channel A Press STANDBY-ON on the recorder. B Turn on the TV set. Note If connected to your VCR, make sure it is turned off or in standby mode before proceeding. C Press ‘0’ and then the Channel Down button on the TV’s remote control repeatedly until you see this screen. This is the correct viewing channel for the recorder. Note You may press the AV or SELECT button on the TV’s remote control (if available) to select the correct viewing channel. See your TV’s user manual. To AC power Basic Connection Connection with a VCR or similar device Your new Philips recorder replaces the VCR for your recording needs. First, unplug all the connections from your VCR. STANDBY-ON A Before connecting, unplug the antenna cable that is currently connected to your TV. B Connect the antenna cable to the ANTENNA- IN jack on the recorder. C Use the supplied RF coaxial cable to connect the TV-OUT jack on this recorder to the Antenna In jack on the TV. D Use the supplied video cable (yellow plug) to connect the VIDEO (CVBS) OUTPUT jack on this recorder to the VIDEO IN jack on the TV. E Use the supplied audio/video cable (red/ white plugs) to connect the AUDIO OUTPUT jacks on this recorder to the AUDIO IN jacks on the TV. F Connect the power cable from the recorder to an AC power outlet. To AC power Television (rear) To antenna or set-up box B C D E F B C D B Initial Installation A Press SETUP on the remote control. Screen Saver Reset Menu Settings Setup Menu - General English On OK Note Use up S and down T keys to toggle through the options. Select an item by pressing right X. To confi rm a setting, press OK . B Select the OSD language. z Remain in mode, select { On Screen Display Language } and press right X to access the options. Î Select the desired language option and press OK to confi rm your selection. C Setup and install TV channels. z Highlight and press right X. Select { Tuner Input Source } and press OK . { Cable } – if the recorder is connected directly to the cable signal or through a set-top box. { Air } – if the recorder is connected directly to an indoor or outdoor antenna. Note Press OK to confi rm your selection. z Select { Channel Search } and press OK on the remote control to start automatic TV channel search. D Set the date and time. z Highlight and press right X. Select { Date (mm/dd/yy) } or { Time (hh:mm:ss) } and press OK . Use the numeric keypad 0 -9 to input the date/time, then press OK to confi rm. Note To further fi ne-tune the date and time settings, see the user manual “CLOCK Settings”. E Press SETUP to exit.