Philips DVDR75/051 Quick Install Manual

Connecting your DVD recorder to the TV set /Initial installation Warning ! As long as the initial installation has not been carried out, the buttons on the front of the DVD recorder remain without function. 1 Remove the aerial cable plug from your TV set. Insert it into the ANTENNA IN socket at the back of the DVD recorder 2 Insert one end of the supplied aerial cable into the TV OUT socket at the back of the DVD recorder and the other end into the aerial input socket of the TV set. 3 Connect socket EXT 1 TO TV-I/O or sockets OUT S-VIDEO (Y/C) , OUT VIDEO (CVBS) , OUT L AUDIO R with the corresponding sockets of your TV set. My TV sets supports the functions Easy Link, Cinema Link, NexTView Link, Q1link, Smart Link, Megalogic, Datalogic,... Connect the scart socket EXT 1 TO TV-I/O at the back of the DVD recorder with the - suitable for data transfer - scart socket of your TV set (see the instruction manual of your TV set) using a special cable (suitable for these data transfers). ? 4 Switch on the TV set. 5 Use the supplied mains cable to connect the mains socket 4MAINS at the back of the DVD recorder with the wall outlet. The most important features of the DVD recorder will appear in scrolling text on the display. After the first installation is completed this function will be switched off. 6 Switch on the DVD recorder using STANDBY/ON m .
   7 '
  ' will appear on the display. Virgin mode Menu Language English Español Français Italiano Deutsch Press OK to continue 8 If necessary, select the programme number for the input socket at the TV set. The initial installation menu appears on the screen. 9 Select your favourite setting using CH- B or CH+ A . Confirm with OK . The initial installation is carried out automatically. Wait until the whole procedure is complete. ENGLISH

1 Press MONITOR to view the currently selected input signal on the screen. 2 Select the programme number from which to record using CH+ A or CH- B . Recording via external sockets Using CH+ A or CH- B , select the front sockets (' ', ' ') or the sockets ('EXT1', 'EXT2') at the back of the DVD recorder, from which you wish to record. Selecting the recording mode (quality) Using REC MODE , you can choose between 'M1' (camcorder recordings/1 hour), 'M2' (2 hours), 'M2x' (2,5 hours), 'M3' (3 hours) or 'M4' (4 hours) or 'M6' (6 hours). SAFE1RECORD Normally, a recording always begins at the position where the previous recording ended. All subsequent recordings will be erased. If you want the new recordig to be made at the end of all the other recordings, hold down REC/OTR n until '  ' appears on the display. Tip 3 Press RECORD or REC/OTR n to start the recording. a' 
 ' (no signal) will appear on the display b Check whether the cable connectors are properly inserted. b If the recording is to be made from a video recorder, change the 'tracking' setting on the video recorder. b In case of bad or non-standard video input signals, the DVD recorder may be unable to detect the signal. Problem How to program a recording 1 Switch on the TV set. If required, select the programme number for the DVD recorder. 2 Press TIMER on the remote control. Timer Timer programming Date 01 Prog. BBC1 Start 20:15 VPS PDC End 21:30 Rec Mode M1 Mo-Fr/Weekly Press SELECT To store Press OK 3 Select 'Timer programming' using CH- B or CH+ A and confirm with C . The current information is displayed. 4 Select the field using D or C . 5 Enter the data you want using CH- B , CH+ A , or with the number buttons 0..9 . 6 Confirm with OK . The information has been stored in a TIMER block. 7 To end, press TIMER . 8 Switch off the DVD recorder using STANDBY m . A programmed recording functions only if the DVD recorder has been switched off using STANDBY m . ENGLISH 3139 246 12931 3093/000 (WwnnNwWnNnnwNnWNwwnNnWnNwWwnnN) DVDR 75/051