Philips DVP3100V/01 Operation & User’s Manual

Need help fast? Read your User’s Manual first for quick tips that make using your Philips product more enjoyable. If you have read your instructions and still need assistance, you may access our online help at www.philips.com/support DVD VIDEO PLAYER DVP 3100V Owner’s Manual Manuel de l’utilisateur Bedienungsanleitung Gebruiksaanwijzingen Istruzioni per l’uso Manual del usuario
  Manual proprietário

equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation mark within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING: Do not install this equipment in a confined space such as a book case or similar unit. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. The openings should be never be blocked by placing the product on a bed, sofa, rug or other similar surface.This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instruction have been adhered to. CAUTION: This Digital Video Disc Player employs a Laser System. VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED. To ensure proper use of this product, please read this owner’s manual carefully and retain for future reference, should the unit require maintenance, contact an authorized service location-see service procedure. Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure.Visible laser radiation when open. DO NOT STARE INTO BEAM. CAUTION: The apparatus shall not be exposed to water, dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. This product is manufactured to comply with the radio interference requirements of EEC DIRECTIVE 89/336/EEC, 93/68/EEC and 73/23/EEC. Notes on copyrights: It is forbidden by law to copy, broadcast, show, broadcast via cable, play in public, or rent copyright material without permission. This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some discs. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. "The making of unauthorized copies of copy-protected material, including computer programmes, files, broadcasts and sound recordings, may be an infringement of copyrights and constitute a criminal offence. This equipment should not be used for such purposes." SERIAL NUMBER:The serial number is found on the back of this unit.This number is unique to this unit and not available to others.You should record requested information here and retain this guide as a permanent record of your purchase. Model No. ___________________________________ Serial No. ___________________________________ Features: • Complete versatility to play DVD, DivX,VCDs, audio CDs or VHS Tapes. • Watch a DVD while recording a TV show to the VCR. • Remote controls DVD and VCR decks. • Records from DVD to VHS (unless DVD is copy protected with Macrovision). • Hi-Fi Stereo VCR. WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 625p DVD PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER. SHOWVIEW is a registered trademark of Gemstar Development Corporation. The SHOWVIEW system is manufactured under licence from Gemstar Development Corporation. R

Français ....................................................41 Deutsch ....................................................79 Nederlands ............................................117 Español ..................................................192 Italiano

 ................................................230 Italiano....................................................155 Português Português ..............................................268

Index ..................................................................................3 Contents ............................................................................4 Before Use ......................................................................5-6 Playable Discs ..................................................................................5 Remote Control Operation Range ............................................5 Precautions ......................................................................................6 Notes on Discs ..............................................................................6 About Symbols ................................................................................6 Selecting the Viewing Source........................................................6 Front Panel and Display Window ....................................7 Remote Control ................................................................8 Rear Panel ..........................................................................9 Preparation Connections................................................................10-11 Connecting to a TV & Decoder................................................10 Connecting to Optional Equipment ........................................11 Before Operation - VCR part....................................12-16 Tuning in a video channel on your TV ....................................12 Using your DVD+VCR for the very first time......................12 Setting the clock Manually..........................................................13 To set the colour system............................................................13 How to using the main menu....................................................14 Tuning in TV stations Automatically ........................................14 Tuning in TV stations Manually ..................................................15 Changing the other of TV stations ..........................................16 Deleting TV stations ....................................................................16 Before Operation - DVD part ..................................17-20 General Explanation ....................................................................17 On-Screen Display........................................................................17 Initial Settings ..........................................................................18-20 ●General Operation ............................................................18 ●Language ..............................................................................18 ●Display ..................................................................................18 ●Audio ....................................................................................19 ●Others ..................................................................................19 ●LOCK (Parental Control) ................................................20 Operation Operation with Tape ..................................................21-24 Playing a tape ................................................................................21 ●OPR (Optimum Picture Response) ..............................21 Instant Timer Recording (ITR) ..................................................22 ShowView Programming ............................................................23 Timer recording using On Screen Display ............................24 Operation with DVD and Video CD ........................25-27 Playing a DVD and Video CD ....................................................25 General Features ..........................................................................25 ●Moving to another TITLE ................................................25 ●Moving to another CHAPTER/TRACK........................25 ●Search....................................................................................25 ●Still Picture and Frame-by-Frame Playback..................25 ●Slow Motion ........................................................................26 ●Repeat ..................................................................................26 ●Repeat A-B ..........................................................................26 ●Time Search ........................................................................26 ●3D Surround........................................................................26 ●Screen Saver ........................................................................26 ●Zoom ....................................................................................27 ●Marker Search ....................................................................27 Special DVD Features..................................................................27 ●Title Menu ............................................................................27 ●Disc Menu............................................................................27 ●Camera Angle......................................................................27 ●Changing the Audio Language ........................................27 ●Changing the Audio Channel ..........................................27 ●Subtitles ................................................................................27 Operation with Audio and MP3/Windows MediaTM Audio Disc ..................................................................28-29 Playing an Audio CD and MP3/Windows MediaTM Audio Disc............................................................................................28-29 ●Notes on MP3/Windows MediaTM Audio Recordings28 ●Pause ....................................................................................29 ●Moving to another Track ..................................................29 ●Repeat Track/All/Off ..........................................................29 ●Search....................................................................................29 ●Shuffle....................................................................................29 ●Repeat A-B ..........................................................................29 ●3D Surround........................................................................29 Operation with JPEG Disc..............................................30 Viewing a JPEG disc ....................................................................30 ●Slide Show ..........................................................................30 ●Moving to another File......................................................30 ●Still Picture ..........................................................................30 ●Zoom ....................................................................................30 ●To rotate Picture ................................................................30 ●To listen to MP3/Windows MediaTM Audio music watching picture ......................................................................30 ●Notes on JPEG Recordings..............................................30 Programmed Playback....................................................31 Programmed Playback with Audio CD and MP3/Windows MediaTM Audio Disc ......................................................................31 ●Repeat Programmed Tracks ............................................31 ●Erasing a Track from Program list ..................................31 ●Erasing the Complete Program list................................31 Operation with DVD VR Disc ........................................32 Playing a DVD VR format Disc..................................................32 Maintenance and Service ............................................................32 ●Handling the unit................................................................32 Operation with DivX Disc..............................................33 Playing a DivX Movie Disc ........................................................33 Additional Operation ................................................34-35 On Screen Display........................................................................34 Tape Counter Memory Stop ....................................................34 Child Lock......................................................................................34 Video Doctor (Self-Diagnosis) ..................................................34 Hi-Fi Stereo Sound System ........................................................35 Wide Screen Compatibility 16:9 ..............................................35 To set the decoder ......................................................................35 Last Condition Memory..............................................................35 Special Recording............................................................36 Copying from DVD to VCR ......................................................36 Recording from another video recorder................................36 Reference Troubleshooting ..............................................................37 Language Code List ........................................................38 Country/Area Code list ..................................................39 Specification ....................................................................40

Video CD (VCD) (8 cm / 12 cm disc) Audio CD (8 cm / 12 cm disc) In addition, this unit can play DVD±R, DVD±RW, SVCD, and CD-R or CD-RW that contains audio titles, MP3/Windows MediaTM Audio and/or JPEG files. This indicates a product feature that is capable of playing DVD-RW discs recorded with Video Recording format. Notes – Depending on the conditions of the recording equipment or the CD-R/RW (or DVD±R/±RW) disc itself, some CD-R/RW (or DVD±R/±RW) discs cannot be played on the unit. – Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc. – Do not use irregular shaped CDs (e.g., heart-shaped or octagonal). It may result in malfunctions. Notes on DVDs and Video CDs Some playback operations of DVDs and Video CDs may be intentionally fixed by software manufacturers.As this unit plays DVDs and Video CDs according to disc content designed by the software manufacturer, some playback features of the unit may not be available, or other functions may be added. Refer also to the instructions applied with the DVDs and Video CDs. Some DVDs made for business purposes may not be played on the unit. Regional code of the DVD player and DVDs This DVD player is designed and manufactured for playback of region “2” encoded DVD software.The region code on the labels of some DVD discs indicates which type of player can play those discs.This unit can play only DVD discs labeled “2” or “ALL”. If you try to play any other discs, the message “Check Regional Code” will appear on the TV screen. Some DVD discs may not have a region code label even though their playback is prohibited by area limits. Disc-related terms Title (DVD only) The main film content or accompanying feature content or additional feature content, or music album. Each title is assigned a title reference number enabling you to locate it easily. Chapter (DVD only) Sections of a picture or a musical piece that are smaller than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number, enable you to locate the chapter you want. Depending on the disc, no chapters may be recorded. Track Sections of a picture or a musical piece on a video CD or an audio CD. Each track is assigned a track number, enabling you to locate the track you want. Scene On a video CD with PBC (Playback control) functions, moving pictures and still pictures are divided into sections called “Scenes”. Each scene is displayed in the menu screen and assigned a scene number, enabling you to locate the scene you want.A scene is composed of one or several tracks. DivX DivX is the name of a revolutionary new video codec which is based on the new MPEG-4 compression. DivX, DivX Certified, and associated logos are trademarks of DivXNetworks, Inc and are used under license. Types of video CDs There are two types of video CDs: Video CDs equipped with PBC (Version 2.0) PBC (Playback control) functions allow you to interact with the system via menus, search functions, or other typical computer-like operations. Moreover, still pictures of high resolution can be played if they are included in the disc. Video CDs not equipped with PBC (Version 1.1) Operated in the same way as audio CDs, these discs allow playback of video pictures as well as sound, but they are not equipped with PBC. 2 Remote Control Operation Range Point the remote control at the remote sensor and press the buttons. ●Distance:About 23 ft (7 m) from the front of the remote sensor ●Angle: About 30° in each direction of the front of the remote sensor Remote control battery installation Detach the battery cover on the rear of the remote control, and insert two (size AA) batteries with and aligned correctly. Caution Do not mix old and new batteries. Never mix different types of batteries (standard, alkaline, etc.).

Precautions Handling the unit When shipping the unit The original shipping carton and packing materials come in handy. For maximum protection, re-pack the unit as it was originally packed at the factory. When setting the unit The picture and sound of a nearby TV or radio may be distorted during playback. In this case, position the unit away from the TV or radio, or turn off the unit after removing the disc. To keep the surface clean Do not use volatile liquids, such as insecticide spray, near the unit. Do not leave rubber of plastic products in contact with the unit for a long period of time.They will leave marks on the surface. Cleaning the unit To clean the cabinet Use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a mild detergent solution. Do not use strong solvents, such as alcohol, benzine, or thinner, as these might damage the surface of the unit. To obtain a clear picture The DVD player is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn down, the picture quality will be poor. Regular inspection and maintenance are recommended after every 1,000 hours of use. (This depends on the operating environment.) For details, please contact your nearest dealer. Notes on Discs Handling discs Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints will not get on the surface. Do not stick paper or tape on the disc. Storing discs After playing, store the disc in its case. Do not expose the disc to direct sunlight or sources of heat, or leave it in a parked car exposed to direct sunlight, as there may be a considerable temperature increase inside the car. Cleaning discs Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean the disc with a clean cloth.Wipe the disc from the center out. Do not use strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static spray intended for older vinyl records. About Symbols About the symbol display “ ” may appear on the TV screen during operation. This icon means the function explained in this owner’s manual is not permitted by the DVD+VCR or is not available on that specific DVD video disc. About the disc symbols for instructions A section whose title has one of the following symbol is applicable only to the disc represented by the symbol. DVD Video CDs with the PBC (playback control) function. Video CDs without the PBC (playback control) function. Audio CDs. MP3 disc. JPEG disc. DivX disc. DivX JPEG MP3 CD VCD1.1 VCD2.0 DVD Selecting the Viewing Source You must select one of your output sources (DVD or VCR) to view on the TV screen. ●If you want to view DVD deck output source: Press DVD on the remote or SOURCE on the front panel and output source of DVD deck is viewed on the TV screen. ●If you want to view VCR deck output source: Press VCR on the remote or SOURCE on the front panel and output source of VCR deck is viewed on the TV screen. Notes ●If you insert a disc while the DVD+VCR is in the VCR mode, the DVD+VCR will switch to DVD mode automatically. ●If you insert a cassette tape without prevention tab while the DVD+VCR is in the DVD mode, the DVD+VCR will switch to VCR mode automatically.

Forward Skip/Scan/Fast-Forward Go to NEXT chapter/track.Press and hold for two seconds for a fast forward search. Winds the tape forwards. Reverse Skip/Scan, Rewind Go to beginning of current chapter/track or to PREVIOUS chapter/track. Press and hold for two seconds for a fast reverse search. Rewinds the tape. Tape Compartment PLAY ( N ) Starts playback. STOP ( x ) Stops playback. DVD OPEN/CLOSE ( ) Opens or closes the disc tray. EJECT ( ) Tape Eject. VCR Record CHANNEL 3 4 Channel selection Display window Shows the current status of the unit. PAUSE( \ \ ) Pause palyback temporarily/ frame- by-frame playback. Video IN Jack Audio IN (L/R) Jacks Disc Tray Insert a disc here. POWER Switches the unit to ON or OFF. Remote Sensor Point the remote control here. SOURCE DVD/VCR Selector DVD VCR REC TV P VCR deck is selected. DVD tray is selected. Indicates repeat mode. Indicates TV mode. (See Notes on page 22.) Indicates total playing time, elapsed time, or current deck status A disc is loaded in the DVD deck. (Lights when a disc is loaded in the DVD tray and flashes when no disc is loaded.) DVD+VCR is in timer recording or a timer recording is programmed Indicates the Progressive Scan is set to On mode. A cassette is in the VCR deck. VCR recording is engaged. DVD to VCR copy is in progress. Child Lock is engaged. DVD to VCR copy

TITLE SHUFFLE SHOWVIEW PAUSE/STEP PLAY MENU DISC SYSTEM MENU DISPLAY 1 2 3 4 5 6 7 8 9 0 OK A-B CHILD LOCK VIDEOPLUS DVD/VCR select button Select the output source (DVD or VCR) to view on the TV screen. TV/VIDEO To view channels selected by the VCR tuner or by the TV tuner. 0-9 numerical buttons Selects numbered options in a menu. DISC MENU Accesses menu on a DVD disc. SYSTEM MENU Accesses or removes DVD setup menu and VCR menu. SKIP ./REW Skip to beginning of current chapter or track, press twice in quick successions to go to previous chapter or track. Press and hold button for about two seconds to search backward. (For DVD only) Rewinds the tape during the STOP mode or for fast reverse picture search. SKIP > /FWD Skip to next chapter or track. Press and hold button for about two seconds to search forward.(For DVD only) Advances the tape during the STOP mode or for fast forward picture search. MARKER Marks any point during playback. SEARCH Displays MARKER SEARCH menu. INPUT To select the VCR deck’s source (Tuner,AV1,AV2 or AV3). RECORD Records normally or activates Instant Timer Recording with repeated presses. REPEAT Repeat chapter, track, title, all. REPEAT A-B - Repeats sequence. - This button also controls the speed of the VCR recording. For more info, please refer to page 22. PROGRAM Accesses or removes Program menu. CLEAR - Resets tape counter to M 0:00:00 - Removes a track number on the program menu or a mark on the MARKER SEARCH menu. Note This remote control use the same buttons for VCR and DVD functions (ex. PLAY). When using a VCR, first press the VCR button. When using a DVD, first press the DVD button. POWER Switches DVD+VCR ON and OFF. EJECT, OPEN/CLOSE - Opens and closes the disc tray. - Ejects the tape in the VCR deck. RETURN Displays the menu of a Video CD with PBC. DISPLAY Accesses On-Screen display. Switches among the clock, tape counter and tape remaining modes. b/B/v/V (left/right/up/down) - Selects an option in the menu - v/V: Selects channel of VCR.Adjusts manually the tape’s picture onscreen. OK - Acknowledges menu selection. - Displays functions on the TV screen. STOP Stops playback. PLAY Starts playback. PAUSE/STEP Pause playback or recording Press repeatedly for frame-by-frame playback during pause. SUBTITLE Selects a subtitle language. AUDIO Selects an audio language (DVD). ANGLE Selects a DVD camera angle if available. ZOOM Enlarges DVD/VCD video image. TITLE Displays the disc’s Title menu, if available. SHUFFLE - Plays tracks in random order. CHILD LOCK Switch the Child Lock on and off. SHOWVIEW To display the programme menu for ShowView programming.

rear panel. Electrostatic discharge may cause permanent damage to the unit. AUDIO OUT (Left/Right) (DVD EXCLUSIVE OUT) Connect to an amplifier, receiver or stereo system. VIDEO/AUDIO OUT(Left/Right) (DVD/VCR OUT) Connect to a TV with video and audio inputs. AERIAL Connect the aerial using this jack. COAXIAL (Digital audio out jack) (DVD EXCLUSIVE OUT) Connect to digital (coaxial) audio equipment. RF OUT Connect to your TV using this jack. EURO AV1 AUDIO/VIDEO (VCR IN+OUT/DVD OUT) Connect to your TV set or another video recorder. AC Power Cord Connect to a power source. COMPONENT/PROGRESSIVE SCAN VIDEO OUT (Y Pb Pr) (DVD EXCLUSIVE OUT) Connect to a TV with Y Pb Pr inputs. EURO AV2 DECODER Connect to pay-TV decoder or another video recorder.

connect, there are various ways you could connect the unit. ●Please refer to the manuals of your TV, Stereo System or other devices as necessary to make the best connections. ●For better sound reproduction, connect this unit’s AUDIO OUT jacks to the audio in jacks of your amplifier, receiver, stereo or audio/video equipment. See “Connecting to optional equipment” on page 11. Caution – Make sure this unit is connected directly to the TV. Set the TV to the correct video input channel. – Do not connect this unit’s AUDIO OUT jack to the phono in jack (record deck) of your audio system. Connecting to a TV & Decoder ●Make one of the following connections, depending on the capabilities of your existing equipment. Basic connection (AV) 1 Connect the EURO AV1 AUDIO/VIDEO on the rear panel of this unit to the SCART input socket on the TV using a SCART lead. 2 Some TV broadcasters transmit encoded television signals which you can only see with a purchased or rented decoder.You can connect such a decoder (descrambler) to the DVD+VCR. Basic connection (RF) 1 Connect the RF antenna cable from your indoor/ outdoor antenna to AERIAL jack on the rear panel of this unit. 2 Connect the supplied RF antenna cable from the RF OUT jack on the rear panel of this unit to your television’s Antenna Input. DVD exclusive out connection ●Component Video (Color Stream®) connection 1 Connect the COMPONENT/PROGRESSIVE SCAN VIDEO OUT jacks on the DVD Player to the corresponding in jacks on the TV using the Y Pb Pr cable. 2 Connect the Left and Right AUDIO OUT jacks of the DVD Player to the audio left/right in jacks on the TV using the audio cables. Progressive Scan (ColorStream®Pro) connection ●If your television is a high-definition or “digital ready” television, you may take advantage of the DVD Player’s progressive scan output for the highest video resolution possible. ●If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try Progressive Scan on the DVD Player. 1 Connect the COMPONENT/ PROGRESSIVE SCAN VIDEO OUT jacks on the DVD Player to the corresponding in jacks on the TV using the Y Pb Pr cable. 2 Connect the Left and Right AUDIO OUT jacks of the DVD Player to the audio left/right in jacks on the TV using the audio cables. Notes – Set the Progressive to “On” on the setup menu for progressive signal, see page 18. – Progressive scan does not work with the analog video connections (yellow VIDEO OUT jack). AUDIO INPUT L R AERIAL Rear of TV Rear of this unit (Basic connection) Rear of this unit (DVD exclusive out connection) COMPONENT VIDEO INPUT/ PROGRESSIVE SCAN Pr Pb Y VIDEO INPUT Decoder SCART INPUT

Equipment Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic II/ Pro Logic Connect the Left and Right DVD/VCR AUDIO OUT or AUDIO OUT (DVD EXCLUSIVE OUT) jacks on this unit to the audio left and right in jacks on your amplifier, receiver or stereo system, using the audio cables. Connecting to an amplifier equipped with two channel digital stereo (PCM) or to an Audio/ Video receiver equipped with a multi-channel decoder (Dolby Digital™ or MPEG 2) 1 Connect one of this unit’s DIGITAL AUDIO OUT jack (COAXIAL) to the corresponding in jack on your amplifier. Use an optional digital (coaxial) audio cable. 2 You will need to activate this unit’s digital output. (See “Audio” on page 19). Digital Multi-channel sound A digital multi-channel connection provides the best sound quality. For this you need a multi-channel Audio/Video receiver that supports one or more of the audio formats supported by your unit (MPEG 2 and Dolby Digital). Check the receiver manual and the logos on the front of the receiver. Notes – If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all. – To see the audio format of the current DVD in the On-Screen Display, press AUDIO. L R AUDIO INPUT DIGITAL INPUT COAXIAL DIGITAL INPUT OPTICAL Amplifier (Receiver) 2 channel analog stereo or Dolby Pro Logic II/Pro Logic connection. Rear of this unit Digital multi-channel connection (DVD exclusive out connecttion) DVD exclusive out DVD/VCR OUT

12 Tuning in a video channel on your TV Video channel (RF output channel) is the channel on which your TV receives picture and sound signals from the DVD+VCR through the RF cable. If you have used a SCART lead you will not have to tune your TV, simply select the AV channel.The AV channel is already pre-tuned for optimum video playback on your TV. Perform the following steps only if interference appears in the TV picture after you have moved to a different area or a new station has started broadcasting in your area, or if you change the connection from RF connection to AV connection, or vise versa. 1 Turn on DVD+VCR and TV. 2 Set the vacant position 36 on your TV. 3 Press 1 on the remote control to enter the standby mode (the clock indicator will be dimmed). 4 Press and hold CHANNEL 3 or 4 on the DVD+ VCR for more than 4 secs. RF 36 will appear in the DVD+VCR display. The following picture will be displayed on the TV screen. If the picture is snowy, move to step 5. If the picture is clean, press 1 on the DVD+VCR to finish. 5 Press CHANNEL 3 or 4 on the DVD+VCR to set the video channel to a vacant position between 22 and 68 which is not occupied by any local station in your area. Note The RF channel will not change until step 6 has been executed. 6 Press 1 to store the new RF video channel into the DVD+VCR memory. Now tune your TV set to the new DVD+VCR RF channel. Note If the TV picture was clear in step 4, do not retune your TV. Using your DVD+VCR for the very first time For the following steps we assume that you have just connected your DVD+VCR for the very first time. To make tuning TV stations an easy task your DVD+VCR incorporates the Automatic Channel Memory System (ACMS).This system will automatically tune, store TV channels and set the clock (date & time) in your DVD+VCR. 1 Make sure that you have correctly installed your DVD+VCR. Press 1 to turn on your DVD+VCR. If the initial Menu Screen doesn’t appear on screen, make sure that you have tuned your TV to a video channel. Or if this is correct it may mean that your DVD+VCR is already tuned. 2 Press b or B to select the desired country. (A:Austria, B: Belgium,CH: Switzerland, D: Germany, DK: Denmark, E: Spain, F: France, I: Italy, N: Norway, NL: Netherlands, P: Portugal, S:Sweden, SF: Finland, OTHERS) 3 Press OK to start the automatic tuning process. Programme number TV Station PR01 ARD PR02 ZDF PR03 WDR 3 PR04 BR3 PR05 HR3 PR06 NDR3 The TV station shown above may vary according to the area you live in. 4 Press SYSTEM MENU to remove the menus from the TV screen. 01 C02 00 ARD 02 C03 00 ZDF 03 C04 00 WDR 3 E S i Pr-12 ACMS OK i Pr-12 ACMS A N NL P S SF OTHERS B DK E F I CH D RF CHANNEL 36

13 Setting the clock Manually The clock in your DVD+VCR controls time and date settings for your DVD+VCR. The clock is set automatically during ACMS (Automatic Channel Memory System) when you DVD+VCR detects a channel that broadcasts a Teletext signal. If the broadcast signal is weak the clock will not be set and will require setting manually. 1 Press SYSTEM MENU. Press b or B to select SET. Press OK. The auto adjust mode can be set to ‘OFF’ by pressing OK if you want to set the time manually. 2 Use 3 or 4 on the remote control to alter the HOURS, MINUTES, DAY, MONTH and YEAR. Please note your DVD+VCR uses a 24 hour clock. e.g. 1pm will be displayed as 13:00. The day of the week will appear automatically when you enter the year. 3 If you make a mistake press b or B and enter the correct details. 4 Press SYSTEM MENU. To set the colour system 1 Press SYSTEM MENU. 2 The main menu will appear on the TV screen. 3 Press 1 or 2 to select the SYS and press OK. 4 Press 3 or 4 to select according to the COLOUR system used. 5 Press 2 to select the RF AUDIO. Press 3 or 4 to select according to the RF AUDIO used. 6 Press SYSTEM MENU to remove the menus from the TV screen. OSD ON OFF OSD f REC i Pr-12 ACMS PSET R 1 2 SET SYS SYS NIC DECO- DER + - AUD RF - I/I RF - B/G RF - D/K REC i Pr-12 ACMS PSET R 1 2 SET SYS SYS OSD ON OFF OSD f NIC DECO- DER + - AUD AUTO PAL MESECAM HH MM DD MM YY : . . 00 1 01 06 SUN 1 2 SET 8 ACSS : OFF i OK HH MM DD MM YY : . . - - - - - - - - - - - - - ACSS : ON i 1 2 SET OK

14 How to using the main menu This VCR can easily be programmed by using the menus displayed on screen. The menus are controlled from the Remote Control Handset. 1 Switch on your TV set and video recorder by pressing the 1 button. 2 Press SYSTEM MENU button. The main menu will appear on the TV screen. ●REC - Timer recording setting (see p. 24). ●PR SET - Manual tuning setting (see p. 15). ●ACMS - ACMS (Automatic Channel Memory System) (see p. 14). ●SET - Date & clock setting (see p. 13). ●SYSTEM - To set the Colour TV System (see p. 13). RF AUDIO - To select the channel of audio output according to your TV type (“I/I” for PAL I/I TV,“B/G” for PAL B/G TV,“D/K” for PAL D/K TV) (see p. 13). ●Dr. - To check a problem with your VCR (see p. 34). ●AUDIO - To select the channel for audio output (see p. 35). ●F.OSD ON/OFF - To display the operational mode of your VCR (see p. 34). ●16:9/4:3 - To select the aspect ratio of your TV (see p. 35). ●DECODER - To use a pay-TV decoder (or Satellite) with your VCR (see p. 35). ●OPR - To improve the playback picture (see p. 21). ●NIC - To activate or deactivate the NICAM digital sound (see p. 35). Tip You can change the menu language on the DVD setup menu. (See the Menu Language on page 18.) 3 Press 1 and 2 to select the desired menu. Press OK and use 3 or 4 to select. 4 Press SYSTEM MENU to return to a TV picture. Tuning in TV Stations Automatically If the TV broadcast signal is weak your VCR may not detect the necessary information and will not be able to store them correctly.To overcome this problem please turn to the MANUAL TUNING section on page 15. 1 Press 1 to turn on your VCR. 2 Press SYSTEM MENU button. The main menu will appear on the TV screen. Press 1 or 2 to select the ACMS. Press OK. 3 Press 1 or 2 to select COUNTRY. (A:Austria, B:Belgium, CH:Switzerland, D:Germany, DK:Denmark, E:Spain, F:France, I:Italy, N:Norway, NL:Nertherlands, P:Portugal, S:Sweden, SF:Finland, OTHERS) Press OK again to start the automatic tuning process. The VCR’s clock will be set automatically when automatic tuning has finished. If the clock is wrong, see “Setting the clock manually” on page 13). 4 The TV STATION TABLE will appear when tuning is complete. Press SYSTEM MENU to save your settings. 02 C03 00 ZDF 03 C04 00 WDR 3 04 C05 00 BR3 05 C06 00 HR3 06 C07 00 N 3 07 C08 00 NDR3 08 C09 00 SWF3 01 C02 00 ARD OK i , DELETE : MOVE : PSET R 01 C02 00 ARD 02 C03 00 ZDF 03 C04 00 WDR 3 E S i Pr-12 ACMS A N NL P S SF B D DK E F I OK i Pr-12 ACMS CH OTHERS REC SYS OSD ON OFF OSD f PSET R 1 2 SET ACMS Pr-12 ACMS Pr-12 OK i NIC DECO- DER + - AUD REC REC OK i SYS PSET R Pr-12 ACMS OSD ON OFF OSD f 1 2 SET NIC DECO- DER + - AUD

15 Tuning in TV Stations Manually In certain areas of the country broadcast signals may be too weak for your VCR’s automatic tuning process to find or assign TV stations correctly. You must tune in these weaker broadcast stations manually in order for your VCR to store them. 1 Press SYSTEM MENU. The main menu will appear on the TV screen. Press 1 or 2 to select the PR SET. Press OK. 2 Press SYSTEM MENU. The station table will appear. Press 3 or 4 to select the programme number that you want to tune (for example, PR 09). 3 Press OK. Press INPUT to select C (Standard stations) or S (Cable stations): C02 - C69, S01 - S41. Enter the channel number of station that you want to tune with 3 or 4 to find the required station. 4 Searching will stop when it locates a stations. Press 2 to select MFT. Control the fine tuning of the station by using 3 or 4. 5 Press 2 to select STATION so that you may name your TV station. Press OK. 6 Use 3 or 4 to select letters and numbers for the new station name. Use 1 or 2 to move back and forth between characters. Press OK. 7 Press SYSTEM MENU, confirm the station placement. Press SYSTEM MENU again. Your new TV station has now been tuned into your VCR. If you wish to manually tune other stations repeat stages 1 - 7. 11 12 13 14 15 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 09 C10 00 WDR 3 16 10 OK i , DELETE : MOVE : PSET R PR CH MFT STATION C09 00 C10 WDR 3 i OK PSET R PR CH MFT STATION C09 00 C10 i OK PSET R PR CH STATION 09 00 C10 MFT CHANNEL/CABLE : AV i PSET R i PR CH STATION 09 - - - - - - MFT PSET R C - - i 02 C03 00 PR-02 03 C04 00 PR-03 04 C05 00 PR-04 05 C06 00 PR-05 06 C07 00 PR-06 07 C08 00 PR-07 08 C09 00 PR-08 01 C02 00 PR-01 OK i , DELETE : MOVE : PSET R PR CH MFT STATION 01 00 C 02 PSET R i PR-01 REC OK i SYS Pr-12 ACMS 1 2 SET PSET R PSET R OSD ON OFF OSD f NIC DECO- DER + - AUD

16 Changing the order of TV Stations After tuning TV stations into your VCR you may wish to change the order in which they are stored without having to retune them again.The instructions given on this page will show you how you can simply move them into your desired order. 1 Press SYSTEM MENU. The main menu will appear on the TV screen. Press 1 or 2 to select the PR SET. Press OK. 2 Press SYSTEM MENU. Use 3 or 4 to select the programme number you want to move (for example, PR 03). Press 2. 3 Use 3 or 4 to select the programme number you want to move to (for example, PR 05). 4 Press OK. The selected programme will be moved to the new programme number. If you wish to move other TV stations repeat stages 1 - 4. Press SYSTEM MENU to remove the menus from the TV screen. Deleting TV Stations After tuning TV stations into your VCR you may wish to delete a station. The instructions given on this page will show you how you can easily delete any unwanted TV stations. 1 Press SYSTEM MENU. The main menu will appear on the TV screen. Use 1 or 2 to select the PR SET. Press OK. 2 Press SYSTEM MENU. Press 3 or 4 to select the programme number you want to delete. (for example, PR 03) 3 Press 1. After a short while, the selected station will be deleted. 4 Press SYSTEM MENU to remove the menus from the TV screen. If you wish to delete other TV stations repeat stages 1 - 3. How to select Stored TV stations: Stored TV stations can be selected in either of two ways. Use 3 or 4 to select different stations that are tuned into your DVD+VCR. You may also directly select stations using the numbered buttons on the remote control. C04 00 PR-05 02 C02 00 PR-01 C03 00 PR-02 04 C05 00 PR-03 05 C06 00 PR-04 06 C07 00 PR-06 07 C08 00 PR-07 PR-08 08 C09 00 01 03 OK i , DELETE : MOVE : PSET R 02 C03 00 PR-02 03 C04 00 PR-03 04 C05 00 PR-04 05 C06 00 PR-05 06 C07 00 PR-06 07 C08 00 PR-07 08 C09 00 PR-08 01 C02 00 PR-01 OK i , DELETE : MOVE : PSET R PR CH MFT STATION 01 00 C 02 PSET R i PR-01 REC OK i SYS Pr-12 ACMS 1 2 SET PSET R PSET R OSD ON OFF OSD f NIC DECO- DER + - AUD C04 00 PR-05 02 C02 00 PR-01 C03 00 PR-02 04 C05 00 PR-03 05 C06 00 PR-04 06 C07 00 PR-06 07 C08 00 PR-07 PR-08 08 C09 00 01 03 OK i , DELETE : MOVE : PSET R C04 00 PR-03 02 C02 00 PR-01 C03 00 PR-02 04 C05 00 PR-04 05 C06 00 PR-05 06 C07 00 PR-06 07 C08 00 PR-07 PR-08 08 C09 00 01 03 PSET R OK i C04 00 PR-03 02 C02 00 PR-01 PR-02 C03 00 04 C05 00 PR-04 05 C06 00 PR-05 06 C07 00 PR-06 07 C08 00 PR-07 08 C09 00 PR-08 01 OK i 03 PSET R 02 C03 00 PR-02 03 C04 00 PR-03 04 C05 00 PR-04 05 C06 00 PR-05 06 C07 00 PR-06 07 C08 00 PR-07 08 C09 00 PR-08 01 C02 00 PR-01 OK i , DELETE : MOVE : PSET R PR CH MFT STATION 01 00 C 02 PSET R i PR-01 REC OK i SYS Pr-12 ACMS 1 2 SET PSET R PSET R OSD ON OFF OSD f NIC DECO- DER + - AUD

17 General Explanation This manual gives the basic instructions for operating the DVD+VCR. Some DVDs require specific operation or allow only limited operation during playback.When this occurs, the symbol appears on the TV screen, indicating that the operation is not permitted by the DVD+VCR or is not available on the disc. On-Screen Display The general playback status can be displayed on the TV screen. Some options can be changed on the menu. On-screen display operation 1 Press DISPLAY during playback. 2 Use v/V to select an item. The selected option will be highlighted. 3 Use b/B to change the setting of an item. The number buttons can also be used for setting numbers (e.g., title number). For some functions, press OK to execute the setting. Temporary Feedback Field Icons Repeat Title Repeat Chapter Repeat Track (non-PBC Video CDs and Audio CD only) Repeat Disc (non-PBC Video CDs and Audio CD only) Repeat A-B Repeat Off Resume play from this point Action prohibited or not available Notes ●Some discs may not provide all of the features on the on- screen display example shown below. ●If no button is pressed for 10 seconds, the on-screen display disappears. Off A - B All Track Chapter Title Options Title Number Chapter Number Time search Audio language and Digital Audio Output mode Subtitle language Angle Sound Function (Use v/V to select desired option) Shows the current title number and total number of titles, and skips to the desired title number. Shows the current chapter number and total number of chapters, and skips to the desired chapter number. Shows the elapsed playing time, and searches the point by the elapsed time directly. Shows the current audio soundtrack language,encoding method, and channel number, and changes the setting. Shows the current subtitles language, and changes the setting. Shows the current angle number and total number of angles, and changes the angle number. Shows the current sound mode, and changes the setting. Selection Method b/B, or Numeric, OK b/B, or Numeric, OK Numeric, OK b/B, or AUDIO b/B, SUBTITLE b/B,ANGLE b/B 1 /3 1 /12 0:20:09 1 ENG D 3/2.1 CH OFF 1 /1 Normal ABC DVD Items Track Number Time search Audio Channel Sound Function (Use v/V to select desired option) Shows the current track number,total number of tracks and PBC On mode, and skips to the desired track number. Shows the elapsed playing time, and searches the point by the elapsed time directly Shows the audio channel, and changes the audio channel. Shows the current sound mode, and any changes to the setting. Selection Method b / B, or Numbers, OK Numeric, OK b / B, or AUDIO b / B 1 /4 0:20:09 STEREO Normal VCD2.0 VCD1.1 Items Track Number Time search Audio language and Digital Audio Output mode Subtitle language Sound Function (Use v/V to select desired option) Shows the current track number, total number of tracks, and skips to the desired track number. Shows the elapsed playing time, and searches the point by the elapsed time directly. Shows the current audio soundtrack language, encoding method, and channel number, and changes the setting. Shows the current subtitles language, and changes the setting. Shows the current sound mode, and any changes to the setting. Selection Method b/B, or Numeric, OK Numeric, OK b/B, or AUDIO b/B, SUBTITLE b/B 1 /3 0:20:09 MP3 2/0 CH OFF Normal ABC DivX

18 Initial Settings You can set your own Personal Preferences on the player. To display and exit the Menu: Press SYSTEM MENU to display the menu. Press SYSTEM MENU again to return to the initial screen. To go to the next level: Press 2 on the remote control. To go back to the previous level: Press 1 on the remote control. General Operation 1 Press SYSTEM MENU. The setup menu appears. 2 Use 3/4 to select the desired option then press 2 to move to the second level. The screen will show the current setting for the selected option, as well as alternate setting(s). 3 Use 3/4 to select the second desired option then press 2 to move to the third level. 4 Use 3/4 to select the desired setting then press OK to confirm your selection. Some items require additional steps. 5 Press SYSTEM MENU or PLAY B to exit the setup menu. LANGUAGE Menu Language Select a language for the setup menu and on-screen display. Disc Audio / Subtitle / Menu Select a language you prefer for the audio track (disc audio), subtitles, and the disc menu. Original :The original language set for the disc is selected. Other :To select another language, press number buttons to enter the corresponding 4-digit number according to the language code list on page 38. If you enter the wrong language code, press CLEAR. DISPLAY TV Aspect 4:3 : Select when a standard 4:3 TV is connected. 16:9 : Select when a 16:9 wide TV is connected. Display Mode Display Mode settings is only available when the TV Aspect mode is set to “4:3”. Letterbox: Displays a wide picture with bands on the upper and lower portions of the screen. Panscan: Automatically displays the wide picture on the entire screen and cuts off the portions that do not fit. Progressive Scan Progressive Scan Video provides the highest quality pictures with less flickering. If you are using the Component Video jacks for connection to a TV or monitor that is compatible with a progressive scan signal, set Progressive Scan to On. To turn on progressive scan: Connect component out of this unit to the input of your monitor/television, set your television or monitor to component Input. 1 Select “Progressive Scan” on the “DISPLAY” menu then press 2. 2 Select “On” using the 3 / 4 buttons. 3 Press OK to set to progressive scan mode. Caution Once the setting for progressive scan output is entered, an image will only be visible on a progressive scan compatible TV or monitor. If you set Progressive Scan to On in error, you must reset the unit. 1 Remove any disc from the unit and close the disc tray. “dISC” is displayed on the display window. 2 Press and hold STOP for five seconds. The video output will be restored to the standard setting and a picture appear again on TV screen. TV Output Select Set this unit’s TV Output Select options according to the TV connection type. YPbPr:When your TV is connected with the COMPONENT/PROGRESSIVE SCAN VIDEO OUT jacks on this unit. RGB:When your TV is connected with the SCART (RGB signal) jack. DVD DVD DISPLAY TV Aspect Widescreen 16 : 9 Display Mode Off Progressive Scan Move Select TV Output Select RGB DivX DVD Menu Language Original English Off Original Disc Audio Disc Subtitle Disc Menu Move Select LANGUAGE Please refer to following notice when the DivX subtitle does not display properly. Find a suitable language for the DivX subtitle on the figure below. Disc Subtitle Language Available DivX Subtitle Hungarian Czech, Hungarian, Polish, Czech Romanian, Croatian, Slovak, Polish Slovene, Serbian Other 8482 Western European & Turkish

19 AUDIO Each DVD disc has a variety of audio output options. Set the DVD+VCR’s AUDIO according to the type of audio system you use. Dolby Digital / MPEG Bitstream: Select “Bitstream” if you connected the DVD+VCR’s DIGITAL AUDIO OUT jack to an amplifier or other equipment with a Dolby Digital decoder or MPEG decoder. PCM: Select when connected to a 2 channel digital stereo amplifier. DVD discs encoded in Dolby Digital or MPEG will automatically downmixed to two-channel PCM audio. Sample Freq. (Frequency) To change the Sample Frequency setting, first select the desired Digital Audio Output as indicated as above. If your receiver or amplifier is NOT capable of handling 96KHz signals, select 48KHz.When this choice is made, this unit will automatically convert any 96KHz signals to 48KHz so your system can decode them. If your receiver or amplifier is capable of handling 96KHz signals, select 96KHz.When this choice is made, this unit will pass each type of signal through without any further processing. Dynamic Range Control (DRC) With the DVD format, you can hear a program’s soundtrack in the most accurate and realistic presentation possible, thanks to digital audio technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones).Then, you may listen to a movie at a lower volume without losing clarity of sound. Set DRC to On for this effect. Vocal Set Vocal to On only when a multi-channel karaoke DVD is playing.The karaoke channels on the disc will mix into normal stereo sound. OTHERS The PBC,Auto Play and DivX(R) VOD settings can be changed. PBC Set Playback Control (PBC) to On or Off. On:Video CDs with PBC are played according to the PBC. Off:Video CDs with PBC are played the same way as Audio CDs. Auto Play You can set up the DVD Player so a DVD disc automatically starts playing whenever the DVD is inserted. If Auto Play mode is set to On, this DVD player will search a title that playback time is long most and then play back the title automatically. On:Auto Play function is activated. Off:Auto Play function is not activated. Note The Auto Play function may not work for some DVDs. DivX(R) VOD registration code Philips provide you the DivX® VOD (Video On Demand) registration code that allows you to rent and purchase videos using the DivX® VOD service. For more information, visit www.divx.com/vod. 1 Select “DivX(R) VOD” on the “OTHERS” menu then press 2. 2 Press OK and the registration code will appear. 3 Use the registration code to purchase or rent the videos from DivX® VOD service at www.divx.com/vod. Follow the instructions and download the video onto a CD-R for playback on this DVD player. Note All the downloaded videos from DivX® VOD can only be played back on this DVD player. DVD VCD 2.0 PBC Off Move Auto Play OTHERS On Select Select DivX(R) VOD DVD DivX DVD DVD DivX DVD Dolby Digital PCM 48kHz On Bitstream MPEG Sample Freq. DRC Move Select AUDIO Vocal On

20 LOCK (Parental Control) Rating Movies on DVDs may contain scenes not suitable for children.Therefore, discs may contain Parental Control information that applies to the complete disc or to certain scenes on the disc.These scenes are rated from 1 to 8, and alternatively, more suitable scenes are available for selection on some discs. Ratings are country dependent.The Parental Control feature allows you to prevent discs from being played by your children or to have certain discs played with alternative scenes. 1 Select “Rating” on the “LOCK” menu then press 2. 2 To access the Rating, Password and Area Code features, you must input the 4-digit security code you created. If you have not yet entered a security code you are prompted to do so. Input a 4-digit code and press OK. Enter it again and press OK to verify. If you make a mistake before pressing OK, press CLEAR and enter 4-digit security password again. 3 Select a rating from 1 to 8 using 3/4 buttons. Rating 1-8: Rating one (1) has the most restrictions and rating eight (8) is the least restrictive. Unlock: If you select Unlock, Parental Control is not active.The disc will play in full. Note: If you set a rating for the DVD+VCR, all disc scenes with the same rating or lower will be played. Higher rated scenes will not be played unless an alternative scene is available on the disc.The alternative must have the same rating or a lower one. If no suitable alternative is found, playback will stop.You must enter the 4-digit password or change the rating level in order to play the disc. 4 Press OK to confirm your rating selection, then press SYSTEM MENU to exit the menu. Password (Security Code) You can enter or change password. 1 Select “Password” on the “LOCK” menu then press 2. 2 Follow step 2 of “Rating” on left.“Change” or “New” is highlighted. 3 Enter the new 4-digit code, then press OK. Input it again to verify. 4 Press SYSTEM MENU to exit the menu. If you forget your Security Code If you forget your security code you can clear it using the following steps: 1 Press SYSTEM MENU to display the Setup menu. 2 Input the 6-digit number “210499” and the security code is cleared. 3 Enter a new code as described above. Area Code Enter the code of a country/area whose standards were used to rate the DVD video disc, referring to the list (See “Country/Area Code List”, page 39). 1 Select “Area Code” on the “LOCK” menu then press 2. 2 Follow step 2 of “Rating” on left. 3 Select the first character using the 3/4 buttons. 4 Shift the cursor using 2 button and select the second character using 3/4 buttons. 5 Press OK to confirm your country code selection. DVD DVD LOCK Rating New DE Unlock Password Area Code Move Select

21 Playing a tape You will only be able to load and eject video cassettes when your VCR is plugged into the mains. Your VCR may also playback recordings from NTSC tapes (on PAL TV). Getting a better picture When a cassette is inserted and playback started, the automatic tracking function works to get the best possible picture automatically. If the quality of the recording is poor, repeatedly press 3 or 4 on the remote control to manually adjust the tracking until any distortions have been removed. Press numbered 0 on the remote control to switch automatic tracking back on again. 1 Make sure that you have correctly connected your VCR as described earlier in this book. Turn on your TV. Press 1 to turn on your DVD+VCR. Insert the video cassette into your DVD+VCR. The video cassette should have the window side facing up and the arrow facing away from you. 2 Press PLAY B to start playing your tape. If you load a video cassette which has had its record protection tab removed, playback of the cassette will start automatically. AUTO TRACKING Your DVD+VCR will automatically adjust the tracking to give the best picture quality. 3 Press PAUSE/STEP ; to still a picture. Press PAUSE/STEP ; repeatedly to advance the tape frame by frame. If you press T, the picture will be slowed down at about 1/19 times the normal playback. Tapes can be paused for up to 5 minutes.After 5 minutes your DVD+VCR will stop the tape to prevent damaging the tape or your DVD+VCR . Still picture quality can be improved slightly by using 3 or 4. 4 Press PLAY B to continue playing your tape. Double speed playback Press the "N" button during normal playback.The tape will play back at double speed and without sound. Press the "N" button to return to playback at normal speed Picture search: During playing back press either S or T to this will enable you to rapidly wind the tape (7 times normal playback) see where you are on the tape. Logic search: During fast forwarding or rewinding press and hold S or T the picture will be played back at 7 times normal playback speed. 5 Slow motion playback, Shuttle : During playing back or still picture press 1 or 2. You can reach the following playback speeds. (REV, PB 5-, PB 1-, Still, SLW, PLAY, 2PLY, CUE) To switch off the slow motion and shuttle, press the desired function. During slow motion and shuttle, the noise bars may appear on the picture according to the status of tape. If distortions can be seen in the picture, reduce them with 3 or 4. 6 Press STOP to end playback. Press . If the end of the tape is reached, your DVD+VCR will stop playback automatically, rewind, stop, eject the tape. OPR (Optimum Picture Response) This feature automatically improves playback picture quality by adjusting your DVD+VCR to the condition of the tape. 1 Press SYSTEM MENU. 2 Press 1 or 2 to select . 3 Press OK. 4 Press 3 or 4 repeatedly to select: OFF, SOFT or SHARP. Please note you may only set OPR when playing a tape. 5 Press SYSTEM MENU return to screen. REC i Pr-12 ACMS PSET R 1 2 SET SYS OSD ON OFF OSD f NIC DECO- DER + - AUD OFF SOFT SHARP

22 Instant Timer Recording (ITR) Your VCR allows you to make recordings using a variety of simple methods: Instant Timer Recording (ITR) start recording immediately for a set period of time or until the video cassette runs out. Your DVD+VCR incorporates Long Play (LP) which enables you to record up to twice the amount of time on a video cassette. For example an E-180 will record up to 180 minutes using Standard Play (SP); using LP you will be able to record up to 360 minutes. Please note there will be a slight loss in picture and sound quality when using LP. 1 Make sure that you have correctly connected your VCR as described earlier in this book. Press 1 to turn on your VCR. 2 Insert a video cassette with protection tab into your VCR. The video cassette should have the window side facing up and the arrow facing away from you. 3 Press 3 or 4 to select the programme number you wish to record. You may also directly select programme number using the numbered buttons on the remote control. 4 If you wish to record directly from the SCART or RCA sockets repeatedly press INPUT until the socket you wish to record from is displayed. AV 1 for recording from EURO AV1 SCART socket on the rear of your unit. AV 2 for recording from EURO AV2 SCART socket on the rear of your unit. AV 3 for recording from VIDEO IN and AUDIO IN (Left & Right) sockets on the front of your unit. 5 Press REPEAT A-B if you wish to record in Long Play or Standard Play. SP will produce improved picture and sound quality, however LP will provide twice as much recording time as SP. Note Before pressing REPEAT A-B button, do the following steps: 1. Set the remote control to DVD mode by pressing “DVD” on the remote control. 2. Set the DVD+VCR combi in VCR mode by pressing the “SOURCE” button in the front panel until the display window shows “VCR”. 6 Press RECORD on the remote to start recording. RECORD will appear on the TV screen. Press RECORD on your unit or press RECORD on the remote several times. Each successive press will increase the record time by 30 minutes until you reach a maximum of 9 hours. 7 Press PAUSE/STEP ; to avoid recording unwanted scenes. Press PAUSE/STEP ; to continue recording. If you press PAUSE/STEP ; during ITR, the DVD/VCR will enter the record pause mode and ITR is cancelled. Tapes can be paused for up to 5 minutes; RECP will be displayed when a tape is paused.After 5 minutes your DVD+VCR will stop recording to prevent damaging the tape or your DVD+VCR. 8 Press STOP to end recording. STOP will appear on the TV screen for a few seconds. Notes ●If you do not wish to record on a tape (this can happen quite easily by accident!) remove the protection tab on the back edge of the video cassette. ●It is possible to record on a video cassette with the record protection tab removed by covering the hole with self adhesive tape. ●Remember you can record one programme while watching another by starting your instant recording, press TV/VIDEO to appear TV indicator in the display window and then selecting a different channel on your TV.

ShowView Programming ShowView greatly simplifies entering the date, channel, start and end times of a Timer Recording by simply entering a ShowView Code. ShowView Codes are published in most TV guide magazines; they can vary one to nine numbers in length. 1 Make sure that TV channels have been tuned. Insert a video cassette with protection tab into your VCR. 2 Press SHOWVIEW. 3 Press the numbered buttons to enter the ShowView Code of the TV programme that you wish to record. If you make a mistake press 1 then enter the revised number. 4 Press OK. If PLEASE CHECK is displayed it means that you have entered the wrong ShowView number, entered the ShowView number incorrectly. If “- -” is displayed, you have to enter the programme number of the station, you want to record from. 5 Press 1 or 2 to select the settings that you wish to revise. (PR, DATE,TIME and SP). Press 3 or 4 to enter the correct information. 6 Press 3 or 4 to switch VPS/PDC on or off. Press 2 to select the recording speed. Press 3 or 4 to select the desired tape speed (SP, IP, or LP). IP mode determines how much tape is left and switches speed from SP to LP, if necessary, to complete recording the program. IP mode cannot be selected when VPS/PDC is ON. Check that the timer event details are correct. If you wish to record from AUDIO IN and VIDEO IN on the front or from either of the EURO SCART sockets on the back of VCR, press INPUT to select for correct display (AV1,AV2 or AV3). 7 If you want to make another ShowView recording repeat stages 2 - 6. Press SYSTEM MENU twice. If PLEASE CHECK is displayed, you have entered incorrect information and will need to re-enter the data. Press 1 to switch your VCR power off mode. will appear in the video recorder’s display while your VCR waits to make the recording. To watch a DVD during timer recording standby mode, press POWER and DVD to switch to DVD mode. 8 Press POWER to end recording. Notes Video Programme System (VPS) The Video Programme System (VPS) ensures that the TV programmes that you have programmed for timer recording will be recorded exactly from their beginning to end, even if the actual broadcasting time differs from the scheduled time due to delayed start, or if the programme is extended beyond its scheduled time.Also, if a programme is interrupted, for example, if a news flash is inserted, the recording will also be interrupted automatically and resumed when the programme continues. The VPS signal is broadcast by the TV station and this controls the timer in the video recorder. VPS should be set ON for all timer recordings from TV stations broadcasting these signals. It should be set OFF for all timer recordings from TV stations that are not broadcasting these signals. *** The similar system PDC, which is used in the time being in the Netherlands, can also be used with your new video recorder. OK i 0~9, SHOWVIEW NO. 246876543 REC DELETE : OK i 0~9, SHOWVIEW NO. - - - - - - - - - REC

Timer recording using On Screen Display You may set up to seven timer record events within one month of the current date. Note Before setting the timer make sure that you have set the DVD+VCR clock correctly and you know which PR numbers have been assigned to the TV stations you have tuned on your DVD+VCR. Timer Recording function will only active if the DVD+VCR is in Standby mode. 1 Insert a video cassette with protection tab into your DVD+VCR. The video cassette should have the window side facing up and the arrow facing away from you. 2 Ensure that the set is in VCR mode. 3 Press SYSTEM MENU. Press 1 or 2 to select REC. Press OK. 4 Press OK to start setting the timer record event. If all timer record events are full press 3 or 4 to select the event that you wish to remove and replace. Press 1 to delete the event. 5 Press 3 or 4 to enter the station that you wish to record. Once selected press 2. You may also press 3 or 4. If you wish to record from AUDIO IN (L/R) and VIDEO IN on the front or from the EURO SCART sockets on the back of your unit, See Notes (AV1,AV2 or AV3). 6 Press 3 or 4 to enter the date of the programme. If you press OK before entering the date you may select one of the following automated recording features. Use 1 or 2 to select, then press OK to confirm. DLY To record every day (except Saturday and Sunday) at the same time. SU ~ SA To record at the same time every week. 7 Press 3 or 4 to enter the recording start and end times of the programme that you wish to record. Please note your DVD+VCR uses a 24 hour clock. e.g. 1pm will be displayed as 13:00. You may also select the start and end times by using 3 or 4. 8 Press 3 or 4 to switch VPS/PDC on or off. Press 2 to select the recording speed. Press 3 or 4 to select the desired tape speed (SP, IP, or LP). IP mode determines how much tape is left and switches speed from SP to LP, if necessary, to complete recording the program. IP mode cannot be selected when VPS/PDC is ON. Press SYSTEM MENU to set another timer record event and follow steps 4 to 8. 9 Check that the timer event details are correct. Press SYSTEM MENU twice. If PLEASE CHECK is displayed, you have entered incorrect and will need to re-enter the data. Press 1 to switch your DVD+VCR Standby mode. will appear in the display window while your DVD+VCR waits to make the recording. To watch a DVD during timer recording standby mode, press POWER and DVD to switch to DVD mode. 10 Press POWER to end recording. Notes ●You can obtain the PR number assigned to each station by pressing DISPLAY when you are watching the respective channel. ●If at a later date you wish to delete or change any of the settings in timer event memory you may do so without having to enter all the timer event information again. Simply display the timer event screen. Use 3 or 4 to select the event that you wish to delete or change. Press 1 to delete the event...or Press OK to change; then press 1 or 2 to select; Station, Date, Start and End times and LP. Press 3 or 4 to enter the correct information. ●If Timer record events Overlap... Make sure that the preset times of the timer recording events do not overlap. If they do, the earlier programme will always be given priority. Example: Programme 1 is programmed to start at 16:00 and end at 17:00. Programme 2 is programmed to start at 16:30 and end at 17:30. (In this case, Programme 1 will be recorded in its entirety, but only the last 30 minutes of Programme 2 will be recorded.) PR DATE T I M E - - - - - - SP - - - - SP - - - - SP - - - - SP - - - - SP - - - - SP - - - - - - - - - - ~ : : - - - - - - - - ~ : : - - - - - - - - ~ : : - - - - - - - - ~ : : - - - - - - - - ~ : : - - - - - - - - ~ : : - - - - - - - - ~ : : SP i

Playing a DVD and Video CD Playback Setup ●Turn on the TV and select the video input source connected to the DVD player. ●Audio system:Turn on the audio system and select the input source connected to the DVD player. 1 Press OPEN/CLOSE to open the disc tray. 2 Load your chosen disc in the tray, with the playback side down. When a double-sided DVD is inserted, make sure the side you want to play is facing down. 3 Press OPEN/CLOSE to close the tray. Playback starts automatically. If playback does not start, press PLAY B. In some cases, the disc menu might appear instead. If a menu screen is displayed The menu screen may be displayed first after loading a DVD or Video CD which offer a menu. Use the 1 2 3 4 buttons to select the title/chapter you want to view, then press OK to start playback. Press TITLE or DISC MENU to return to the menu screen. ●Use the number buttons to select the track you want to view. Press RETURN to return to the menu screen. ●Menu setting and the exact operating procedures for using the menu may differ depending on the disc. Follow the instructions on the each menu screen. You also may set PBC to Off under setup. See page 19. Notes – If Parental Control is set and the disc is not within the Rating settings (not authorized), the 4-digit code must be entered and/or the disc must be authorized (see “LOCK (Parental Control)”, on page 20). – DVDs may have a region code. Your player will not play discs that have a region code different from your player.The region code for this player is 2 (two). – To watch a DVD during timer recording standby mode, press POWER and DVD to switch to DVD mode. General Features Note Unless stated otherwise, all operations described use the remote control. Some features may also be available on the Setup menu. Moving to another TITLE When a disc has more than one title, you can move to another title as follows: ●Press DISPLAY, then press the appropriate numbered button (0-9) to select a title number. Moving to another CHAPTER/TRACK When a title on a disc has more than one chapter or a disc has more than one track, you can move to another chapter/track as follows: ●Press S or T briefly during playback to select the next chapter/track or to return to the beginning of the current chapter/track. ●Press S twice briefly to step back to the previous chapter/track. ●To go directly to any chapter during DVD playback, press DISPLAY.Then, press 3/4 to select chapter/track icon. Then, enter the chapter/track number using the numbered buttons (0-9). Note For two-digit numbers, press the numbered buttons (0-9) in rapid succession. Search 1 Press and hold S or T for about two seconds during playback. The player will now go into SEARCH mode. 2 Press and hold S or T repeatedly for about two seconds to select the required speed: QX2, QX4, QX16, QX100 (backward) or RX2, RX4, RX16, RX100 (forward). With a Video CD, the Search speed changes: QX2, QX4, QX8 (backward) or RX2, RX4, RX8 (forward). 3 To return to playback, press PLAY B. Still Picture and Frame-by-frame playback 1 Press PAUSE/STEP during playback. The player will now go into PAUSE mode. 2 You can advance the picture frame-by-frame by pressing PAUSE/STEP repeatedly on the remote control. DivX VCD1.1 VCD2.0 DVD DivX VCD1.1 VCD2.0 DVD 1 /3 1 /12 DivX VCD1.1 DVD 1 /3 DVD VCD2.0 DVD VCD1.1 VCD2.0 DVD

General Features (continued) Slow Motion 1 Press ; during playback. 2 Press and hold S or T during still mode. The player will enter SLOW mode. 3 Press and hold S or T repeatedly to select the required speed : T 1/7, T 1/6, T 1/4 or T 1/2 (forward). 4 To exit slow motion mode, press PLAY B. Repeat DVD Video Discs - Repeat Chapter/Title/Off 1 To repeat the currently playing chapter, press REPEAT. The Repeat Chapter icon appears on the TV screen. 2 To repeat the title currently playing, press REPEAT a second time. The Repeat Title icon appears on the TV screen. 3 To exit Repeat mode, press REPEAT a third time. The Repeat Off icon appears on the TV screen. Video CDs, - Repeat Track/All/Off 1 To repeat the track currently playing, press REPEAT. The Repeat Track icon appears on the TV screen. 2 To repeat the disc currently playing, press REPEAT a second time. The Repeat All icon appears on the TV screen. 3 To exit Repeat mode, press REPEAT a third time. The Repeat Off icon appears on the TV screen. Note On a Video CD with PBC, you must set PBC to Off on the setup menu to use the Repeat function. See page 19. Repeat A-B To repeat a sequence in a title: 1 Press REPEAT A-B at your chosen starting point. A * appears briefly on the TV screen. 2 Press REPEAT A-B again at your chosen end point. A B appears briefly on the TV screen, and the repeat sequence begins. 3 To cancel the sequence, press REPEAT A-B. Time Search The Time Search function allows you to start playing at any chosen time on the disc. 1 Press DISPLAY during playback.The on-screen display appears on the screen. The Time Search box shows the elapsed playing time of the current disc. 2 Within 10 seconds, press 3/4 to select the Time Search icon in the on-screen display. The “-:--:--” appears in the Time Search box. 3 Within 10 seconds, use the number buttons to enter the required start time. Enter hours, minutes, and seconds from left to right in the box. If you enter the wrong numbers, press CLEAR to remove the numbers you entered.Then enter the correct numbers. 4 Within 10 seconds, press OK to confirm the start time. Playback starts from the selected time on the disc. If you enter an invalid time, playback will continue from the current point. 3D Surround This unit can produce a 3D Surround effect, which simulates multi-channel audio playback from two conventional stereo speakers, instead of the five or more speakers normally required to listen to multi-channel audio from a home theater system. 1 Press DISPLAY during playback. 2 Use 3/4 to select the sound icon. The sound option will be highlighted. 3 Use 1/2 to select “Normal”, or “3D SUR”. Screen Saver A screen saver image appears when you leave the DVD Player in stop mode for about fifteen minutes. 3D SUR Normal DivX VCD1.1 VCD2.0 DVD -:--:-- 0:20:09 DivX VCD1.1 VCD2.0 DVD Off A - B A - DivX VCD1.1 VCD2.0 DVD Off All Track Title Chapter DivX VCD1.1 VCD2.0 DVD DivX VCD1.1 VCD2.0 DVD

General Features (continued) Zoom The Zoom function allows you to enlarge the video image and to move through the enlarged image. 1 Press ZOOM during playback or still playback to activate the Zoom function. The square frame appears briefly in the right bottom of the picture. 2 Pressing ZOOM each time will change the TV screen in the sequence: 100% size →200% size →400% size → 900% size → 100% size 3 Use the 1 2 3 4 buttons to move through the zoomed picture. 4 To resume normal playback, press ZOOM repeatedly or CLEAR button. Note ●The zoom function may not work for some DVDs. Marker Search You can start playback from a memorized point. Up to nine points can be memorized. To enter a mark, follow these steps. 1 During disc playback, press MARKER when playback reaches the spot that you want to memorize. The Marker icon will appear on the TV screen briefly. 2 Repeat step 1 to enter up to nine Marker points on a disc. To Recall a Marked Scene 1 During disc playback, press SEARCH. The MARKER SEARCH menu will appear on the screen. 2 Within 10 seconds, press 1/2 to select a Marker number that you want to recall. 3 Press OK. Playback will start from the Marked scene. 4 To remove the MARKER SEARCH menu, press SEARCH. To clear a Marked Scene 1 During disc playback, press SEARCH. The MARKER SEARCH menu will appear on the screen. 2 Within 10 seconds, press 1/2 to select a Marker number that you want to erase. 3 Press CLEAR. The Marker number will be erased from the list. 4 Repeat steps 2 and 3 to erase additional Marker numbers. 5 To remove the MARKER SEARCH menu, press SEARCH. Special DVD Features Checking the contents of DVD Video discs: Menus DVDs may offer menus that allow you to access special features.To use the disc menu, press DISC MENU. Then, press the appropriate number button to select an option. Or, use the 1/2/3/4 buttons to highlight your selection, then press OK. Title Menu 1 Press TITLE. If the current title has a menu, the menu will appear on the screen. Otherwise, the disc menu may appear. 2 The menu can list camera angles, spoken language and subtitle options, and chapters for the title. 3 To remove the title menu, press TITLE again. Disc Menu 1 Press DISC MENU. The disc menu is displayed. 2 To remove the disc menu, press DISC MENU again. Camera Angle If the disc contains sequences recorded from different camera angles, the angle icon blinks on the TV screen.You can then change the camera angle if you wish. ●Press ANGLE repeatedly during playback to select a desired angle. The number of the current angle appears on the display. Changing the Audio Language Press AUDIO repeatedly during playback to hear a different audio language or audio track. With DVD-RW discs recorded in VR mode that have both a main and a Bilingual audio channel, you can switch between Main (L), Bilingual (R), or a mix of both (Main + Bilingual) by pressing AUDIO. Changing the Audio Channel Press AUDIO repeatedly during playback to hear a different audio channel (STEREO, LEFT or RIGHT). Subtitles Press SUBTITLE repeatedly during playback to see the different subtitle languages. Notes ●The subtitle file of the DivX file is displayed only smi, srt and sub. ●If there is no information or there is a code that can not read in the DivX file,“1” or etc. are displayed. 1 ENG ABC DivX DVD VCD1.1 VCD2.0 1 ENG D 2/2.1 CH DivX DVD 1 /1 DVD DVD DVD DVD 1/9 DivX VCD1.1 VCD2.0 DVD DivX VCD1.1 VCD2.0 DVD

Playing an Audio CD and MP3/Windows MediaTM Audio Disc The DVD Player can play MP3/Windows MediaTM Audio formatted recordings on CD-ROM, CD-R or CD-RW discs. Before playing MP3/Windows MediaTM Audio recordings, read the notes on MP3/Windows MediaTM Audio Recordings on right. Audio CD Once you insert an audio CD a menu appears on the TV screen. Press 3/4 to select a track then press PLAY or OK and playback starts. MP3/Windows MediaTM Audio 1 Press 3/4 to select a folder, and press OK to see the folder contents. 2 Press 3/4 to select a track then press PLAY or OK. Playback starts. ID3 TAG When playing a file containing information such as track titles, you can see the information by pressing DISPLAY. [ Song,Artist,Album, Comment, Genre ] Tips – If you are in a file list on the “MUSIC” menu and want to return to the Folder list, use the 3/4 to highlight and press OK. – Press DISC MENU to go to the next page. – On a CD with MP3/Windows MediaTM Audio and JPEG you can switch MP3/Windows MediaTM Audio and JPEG. Press TITLE and “MUSIC” or “PHOTO” word on top of the menu is highlighted. – When playing a file containing information such as track titles, you can see the information by pressing DISPLAY. Notes on MP3/Windows MediaTM Audio Recordings MP3/Windows MediaTM Audio Disc compatibility with this player is limited as follows: 1 Sampling Frequency / within 8 - 48 kHz (MP3) within 32 - 48 kHz (Windows MediaTM Audio) 2 Bit rate / within 8 - 320 kbps (MP3) within 32 - 192 kbps (Windows MediaTM Audio) 3 The player cannot read an MP3 file that has a file extension other than “.mp3” . 4 CD-R physical format should be “ISO 9660” 5 If you record MP3/Windows MediaTM Audio files using the software which cannot create a file system, for example “Direct-CD” etc., it is impossible to playback MP3/Windows MediaTM Audio files.We recommend that you use “Easy-CD Creator”, which creates an ISO9660 file system. 6 File names should be named using 8 letters or less and must incorporate “.mp3” or “.wma” extension. 7 Do not use special letters such as “/ : * ? “ < > ” etc. 8 Total number of files on the disc should be less than 1190. 9 Multi session CD containing Windows MediaTM Audio may not be supported. This DVD player requires discs/recordings to meet certain technical standards in order to achieve optimal playback quality. Pre-recorded DVDs are automatically set to these standards.There are many different types of recordable disc formats (including CD-R containing MP3 or Windows MediaTM Audio files).That require certain pre- existing conditions (see above) to insure compatible playback. Customers should also note that permission is required in order to download MP3/Windows MediaTM Audio files and music from the Internet. Our company has no right to grant such permission. Permission should always be sought from the copyright owner. MP3 CD

Pause 1 Press PAUSE/STEP during playback. 2 To return to playback, press PLAY B, OK or press PAUSE/STEP again. Moving to another Track ●Press S or T briefly during playback to go to the next track or to return to the beginning of the current track. ●Press S twice briefly to step back to the previous track. ●You can play any track by inputting its number. Repeat Track/All/Off 1 To repeat the track currently playing, press REPEAT. The Repeat icon and “Track” appears on the menu screen. 2 To repeat all tracks on a disc, press REPEAT a second time. The Repeat icon and “All” appears on the menu screen. 3 To cancel Repeat mode, press REPEAT a third time. Search 1 Press S or T for about two seconds during playback. The player will now go into SEARCH mode. 2 Press S or T repeatedly for about two seconds to select the required speed: QX2, QX4, QX8 (backward) or RX2, RX4, RX8 (forward). Search speed and direction are indicated on the menu screen. 3 To exit SEARCH mode, press PLAY B. Shuffle 1 Press SHUFFLE during playback or when playback is stopped. The unit automatically begins Random Playback and “Random” appears on the menu screen. 2 To return to normal playback, press SHUFFLE. “Random” disappears on the menu screen. Note By pressing T during shuffle playback, the unit selects another track and resumes shuffle playback. Repeat A-B To repeat a sequence. 1 During disc playback, press REPEAT A-B at your chosen starting point. The Repeat icon and “A-” appears on the menu screen. 2 Press REPEAT A-B again at your chosen end point. The Repeat icon and “A-B” appears on the menu screen, and the sequence begins to play repeatedly. 3 To exit the sequence and return to normal play, press REPEAT A-B again. 3D Surround This unit can produce a 3D Surround effect, which simulates multi-channel audio playback from two conventional stereo speakers, instead of the five or more speakers normally required to listen to multi-channel audio from a home theater system. 1 Press AUDIO during playback. "3D SUR." appears on the menu screen. 2 To return to normal playback, press AUDIO repeatedly until "3D SUR." disappears from the menu screen. CD CD MP3 CD MP3 CD MP3 CD MP3 CD MP3 CD

Viewing a JPEG disc This DVD+VCR can play discs with JPEG files. Before playing JPEG recordings, read the notes on JPEG Recordings on right. 1 Insert a disc and close the tray. The PHOTO menu appears on the TV screen. 2 Press 3/4 to select a folder then press OK. A list of files in the folder appears. If you are in a file list and want to return to the Folder list, use the 3/4 buttons on the remote to highlight “ ” and press OK 3 If you want to view a particular file, press 3/4 to highlight a file and press OK or PLAY B. Viewing the file proceeding starts. While viewing a file, you can press STOP to move to the previous menu (PHOTO menu). 4 Press DISC MENU to move to the next page. Slide Show Use 1 2 3 4 to highlight the (Slide Show) then press OK. Tips ●There are three Slide Speed options : >>> (Fast), >> (Normal) and > (Slow). ●On a disc with MP3/Windows MediaTM Audio and JPEG you can switch MP3/Windows MediaTM Audio and JPEG. Press TITLE and MUSIC or PHOTO word on top of the menu is highlighted. ●Press RETURN, information of file is hidden. Moving to another File Press S or T once during viewing a picture to advance to the next file or to the previous file. Still Picture 1 Press PAUSE/STEP during slide show. The player will now go into PAUSE mode. 2 To return to the slide show, press PLAY B or press PAUSE/STEP again. Zoom Use zoom to enlarge the photo image. (see 27 page) To rotate picture Press 3/4 during showing a picture to rotate the picture clockwise or counter clockwise. To listen to MP3/Windows MediaTM Audio music watching picture You can display files while listening to MP3/Windows MediaTM Audio music files recorded on the same disc. 1 Insert the disc containing the two types of file in the player. 2 Press TITLE to display PHOTO menu. 3 Press 3/4 to select a photo file. 4 Use 2/4 to select icon then press OK. Playback starts.The playback will continue until STOP is pressed. Tip To listen to only desired music watching picture, programme the desired tracks from the “MUSIC” menu and then proceed as above. Notes on JPEG Recordings ●Depending upon the size and number of the JPEG files, it could take a long time for the DVD+VCR to read the disc’s contents. If you don’t see an on-screen display after several minutes, some of the files are too big — reduce the resolution of the JPEG files to less than 2M pixels as 2760 x 2048 pixels and burn another disc. ●Total number of files and folders on the disc should be less than 1190. ●Some disc may be incompatible due to different recording format or condition of disc. ●Ensure that all the selected files have the “.jpg” extensions when copying into the CD layout. ●If the files have “.jpe” or “.jpeg” extensions, please rename them as “.jpg” files. ●File names without “.jpg” extension will not be able to be read by this DVD+VCR. Even though the files are shown as JPEG image files in windows explorer. JPEG JPEG JPEG JPEG

CD and MP3/Windows MediaTM Audio Disc The Program function enables you to store your favorite tracks from any disc in the player memory. Program can contain 30 tracks. 1 Press PROGRAM during playback or in the stop mode to enter the Program Edit mode. The mark will appear to the right of the word “Program” on the right side of the menu screen. Note Press PROGRAM to exit the Program Edit mode; the mark will disappear. 2 Select a track, then press OK to place the selected track on the Program list. 3 Repeat step 2 to place additional tracks on the Program list. Audio CD menu MP3/Windows MediaTM Audio menu 4 Press 2. The programmed track you selected last is highlighted on the program list. 5 Use 3/4 to select the track you want to start playing. 6 Press PLAY B to start. Playback begins in the order in which you programmed the tracks. Playback stops after all of the tracks on the Program list have played once. 7 To resume normal playback from programmed playback, then select a track of Audio CD (or MUSIC) list and then press PLAY. Repeat Programmed Tracks ●To repeat the track currently playing, press REPEAT. The Repeat icon and “TRACK” appears on the menu screen. ●To repeat all tracks on the program list, press REPEAT a second time. The Repeat icon and “ALL” appears on the menu screen. ●To cancel Repeat mode, press REPEAT a third time. Note If you press T once during Repeat Track playback, the repeat playback cancels. Erasing a Track from Program List 1 Press PROGRAM in the stop mode to enter the Program Edit mode. 2 Press 2 to move to the Program list. 3 Use 3/4 to select the track that you wish to erase from the Program list. 4 Press CLEAR. The track will be erased from the Program list. Erasing the Complete Program List 1 Follow steps 1-2 of “Erasing a Track from Program List” as above. 2 Use 3/4 to select “Clear All”, then press OK. The complete Program for the disc will be erased. The programs are also cleared when the disc is removed. E E

Playing a DVD VR format Disc This DVD+VCR can play DVD-R/RW discs recorded using the DVD-Video format that have been finalized using the DVD-recorder. This unit will play DVD-RW discs recorded using the Video Recording (VR) format. 1 Insert a disc and close the tray, It start playing automatically. 2 The DVD-VR menu appears on the TV screen when you press DISC MENU buttons while playing. 3 Press 3/4 to select a track then press OK or PLAY B and playback starts. 4 Press DISC MENU to move to the list menu. Notes ●Unfinalized DVD-R/RW discs cannot be played in this player. ●Some DVD-VR disc are made with CPRM data by DVD RECORDER. Player doesn not support these kind of discs. What is ‘CPRM’? CPRM is a copy protection system (with scramble system) only allowing the recording of ‘copy once’ broadcast programs. CPRM stands for Content Protection for Recordable Media. This player is CPRM compatible, which means that you can record copy-once broadcast programs, but you cannot then make a copy of those recordings. CPRM recordings can only be made on DVD-RW discs formatted in VR mode, and CPRM recordings can only be played on players that are specifically compatible with CPRM. Maintenance and Service Refer to the information in this chapter before contacting a service technician. Handling the Unit When shipping the unit Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory. Keeping the exterior surfaces clean • Do not use volatile liquids such as insecticide spray near the unit. • Do not leave rubber or plastic products in contact with the unit for a long period of time since they leave marks on the surface. Cleaning the unit To clean the player, use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a mild detergent solution. Do not use strong solvents such as alcohol, benzine, or thinner, as these might damage the surface of the unit. Maintaining the Unit The DVD player is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn, the picture quality could be diminished. Depending on the operating environment, regular inspection and maintenance are recommended after every 1,000 hours of use. For details, please contact your nearest authorized service center. English

Playing a DivX Movie Disc This DVD+VCR can play DivX movie disc. 1 Insert a disc and close the tray. The MOVIE menu appears on the TV screen. 2 Press 3 / 4 to select a folder then press OK. A list of files in the folder appears. If you are in a file list and want to return to the Folder list, use the 3 / 4 buttons on the remote to highlight “ ” and press OK 3 If you want to view a particular file, press 3 / 4 to highlight a file and press OK or PLAY B. 4 Press STOP to exit. Tips: • If you are in a file list and want to return to the previous Folder list, use the 3 / 4 buttons on the remote to highlight and press ENTER. • Press DISC MENU to move to the next page. • On a CD with MP3/Windows MediaTM Audio Disc, JPEG and MOVIE file, you can switch MUSIC, PHOTO and MOVIE menu. Press TITLE and MUSIC, PHOTO and MOVIE word on top of the menu is highlighted. • The picture may not displayed properly while DivX playback. Set your TV system to AUTO or PAL-60 mode to restore the picture, if available. • The disc subtitle may not be displayed properly, if a DivX subtitle is downloaded through the internet. • If the Disc Subtitle setup menu does not have the DivX subtitle language you are going to play, the subtitle may not be displayed properly. Notice for displaying the DivX subtitle If the subtitle does not display properly during playback, press and hold SUBTITLE about 3 seconds then press 1 / 2 to select another language code until the subtitle is displayed properly. DivX disc compatibility with this player is limited as follows: • Available resolution size of the DivX file is under 720x576 (W x H) pixel. • The file name of the DivX subtitle is available by 56 characters. • If there is impossible code to express in the DivX file, it may be displayed as " _ " mark on the display. • If the number of the screen frame is over 30 per 1 second, this unit may not operate normally. • If the video and audio structure of recorded file is not interleaved, either video or audio is outputted. • If the file is recorded with GMC, the unit supports only 1-point of the record level. * GMC? GMC is the acronym for Global Motion Compensation. It is an encoding tool specified in MPEG4 standard. Some MPEG4 encoders, like DivX or Xvid, have this option. There are different levels of GMC encoding, usually called 1-point, 2-point, or 3-point GMC. Playable DivX file .avi, .mpg, .mpeg Playable Subtitle format SubRip(*.srt/*.txt) SAMI(*.smi) SubStation Alpha(*.ssa/*.txt) MicroDVD(*.sub/*.txt) SubViewer 1.0(*.sub) SubViewer 2.0(*.sub/*.txt) TMPlayer(*.txt) Playable Codec format "DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "XVID ", "MP43 ", "3IVX ". Playable Audio format "Dolby Digital ", "DTS ", "PCM ", "MP3 ", "Windows MediaTM Audio Disc ". • Sampling frequency: within 8 - 48 kHz (MP3), within 32 - 48kHz (Windows MediaTM Audio Disc) • Bit rate: within 8 - 320kbps (MP3), 32 - 192kbps (Windows MediaTM Audio Disc) • Not all the Windows MediaTM Audio Disc Audio format is compatible with this unit.

You may easily display the current time or tape counter, amount of tape left, day, month, year, day of week, programme channel, tape speed and operational mode of your VCR on the TV screen. If a recording is taking place these On Screen Displays will not be recorded onto the tape. 1 Press DISPLAY to display. Press DISPLAY repeatedly to cycle through the display options.The tape counter and amount of tape left will appear if there is a tape loaded. 2 After 3 seconds the majority of the On Screen Displays will clear leaving only the clock or tape counter and the amount of tape left on the screen. Press DISPLAY again to remove all displays from the TV screen. Tape Counter Memory Stop The Digital Tape Counter can be displayed on the display window instead of the time by pressing DISPLAY on the remote control.The Digital Tape Counter indicates the relative positions of recordings on the tape. 1 Press DISPLAY. Press CLEAR to set the counter to 0:00:00. Press PLAY B or start recording. The tape counter will display the actual play time in hours, minutes and seconds. 2 Press STOP 9 when playback or recording is complete. Press S. The tape will rewind and automatically stop when the counter returns to 0:00:00. Child Lock The control buttons on the front of the unit can be switched off so that your unit can only be operated using the remote control. 1 Press CHILD LOCK. and SAFE will appear in the display window. None of the buttons on the front of your unit will work. If any buttons on the front of your unit are pressed SAFE will appear in the display window for a few seconds. 2 Press CHILD LOCK again to switch off the child lock. OFF will appear in the display window. Note – CHILD LOCK is not available on the DVD mode. Video Doctor (Self-Diagnosis) This feature informs you that there is a problem with your VCR.These error messages will appear on the TV screen. 1 Press SYSTEM MENU. Press 1 or 2 to select . Press OK. 2 Press 3 or 4 to check a problem. ANTENNA CONNECT O PLEASE CHECK: Connect the aerial into the jack securely. HEAD STATUS O PLEASE CLEAN: Clean your video heads. TAPE STATUS O NOT RECORDABLE: Insert a tape with its protection tab in place NO. OF TIMER PROGRAMME O 2 Shows the number of timer recording. NEXT TIMER PROGRAMME O PR-01 26 10:00~11:00 SP Shows the current status of timer recording. 3 Press SYSTEM MENU. i ANTENNA CONNECT HEAD STATUS TAPE STATUS NO. OF TIMER PROGRAMME NEXT TIMER PROGRAMME + PLEASE CHECK REC OK i SYS Pr-12 ACMS 1 2 SET PSET R OSD ON OFF OSD f NIC DECO- DER + - AUD + +

Hi-Fi Stereo Sound System Your VCR will record and playback Hi-Fi stereo sound. In addition it has a stereo NICAM digital stereo sound decoder.This allows you to record and playback the sound in several different ways.Video cassettes recorded on your VCR will have a normal mono audio track and two VHS Hi-Fi stereo audio tracks.These stereo tracks allow you to make audio recordings in Hi-Fi stereo or bilingual mode from a TV broadcast, stereo audio system, video disc or another Hi-Fi VCR. 1 Your VCR’s NICAM digital sound decoder allows you to enjoy broadcasts with NICAM sound, as well as standard stereo, bilingual and mono sound.The particular type of sound received or that recorded will be briefly displayed on the TV screen for a couple of seconds: STEREO NICAM Sound is automatically recorded on the Hi-Fi stereo and mono tracks of the video tape. BIL NICAM Both audio channels will be recorded on the Hi-Fi stereo tracks.The primary language channel (left) will be recorded on the mono track of the video tape. MONO The sound is recorded on the Hi-Fi tracks and the mono track of the video tape without any separation. 2 Press SYSTEM MENU. Press F or G to select AUD. 3 Press D or E to select STEREO, LEFT, RIGHT and MONO. In BIL NICAM playback the primary language is output on the left channel and the secondary channel is output simultaneously from the right channel when audio output is set to STEREO.The primary language will be output from both channels when the audio setting is MONO. Please note that when adjusting the tracking control Hi- Fi stereo sound may revert to MONO. Changing TV Audio Channel Som TV programs are broadcast with a bilingual audio program (BIL). Press 3 or 4 to select STEREO/MAIN, STEREO/SUB and MONO/MAIN. Wide Screen Compatibility 16:9 Your VCR can record and play back wide screen aspect ratio programmes (16:9).To record a wide screen format programme successfully the correct type of wide screen signal must be broadcast by the TV station. 1 Switch on your VCR. Press SYSTEM MENU. Press 1 or 2 to select . Press OK. 2 Press 3 or 4 repeatedly to select: AUTO, 4:3 or 16:9. AUTO (Playback mode only): Automatically plays back Wide-Screen programmes as Wide-Screen and Normal programmes as normal. 4:3 Only for playing back and recording Normal format recordings (4:3). 16:9: Only for playing back and recording Wide-Screen format recordings (16:9). 3 Press SYSTEM MENU to remove the menus from the TV screen. To enjoy Wide-Screen playback you must connect your VCR to the TV using a SCART cable. To set the decoder We have already described, how to connect a decoder for pay-TV station as CANAL+ or PREMIERE on page 10. For the recording of an encoded station you do not have to control anything.You just select the station and wait shortly until the decoding will start. 1 Press SYSTEM MENU. The main menu will appear on the TV screen. Press 1 or 2 to select the DECODER. Press OK. 2 Press 3 or 4 to select. ON: When the decoder is connected to the AV2 socket. OFF:When another VCR is connected to the AV2 socket. Press SYSTEM MENU to return to a TV picture. Last Condition Memory This player memorizes the last condition for the last disc you have watched. Settings remain in memory even if you remove the disc from the player or switch off the player. If you load a disc that has its settings memorized, the latest stop position is automatically recalled. Notes – Settings are stored in memory for use any time. – This player does not memorize settings of a disc if you switch off the player before commencing to play it. VCD1.1 CD DVD REC Pr-12 ACMS PSET R 1 2 SET SYS OSD ON OFF OSD f NIC DECO- DER + - AUD AUTO 4:3 16:9 i REC i Pr-12 ACMS PSET R 1 2 SET OSD ON OFF OSD f SYS- TEM NIC DECO- DER + - AUD 4:3 16:9 REC Pr-12 ACMS PSET R 1 2 SET SYS OSD ON OFF OSD f OK i NIC DECO- DER + - AUD

This unit allows you to copy the contents of a DVD to a VHS tape with a press of the D.DUBBING button. Notes ●Be sure to set ‘Progressive Scan’ to “Off” on the setup menu. ●If the DVD you are attempting to copy is copy protected, you may not be able to copy the disc. 1 Insert Disc Insert the disc you wish to copy in the DVD deck and close the disc tray. 2 Insert VHS Tape Insert a blank VHS videotape into the VCR deck. 3 Copy the DVD to VHS Tape Press the D.DUBBING button or RECORD on the unit front panel. ●The DVD will go into Play mode and the VCR will go into Record mode. ●If the DVD disc menu appears, you may need to press the Play button manually to begin copying. Note If you press RECORD button, make sure the player is in DVD mode. 4 Stop the Copy Process. When the DVD is finished playing, press the STOP button to end the copy. ●You must stop the Copy process manually when the DVD movie ends, or the unit may replay and record over and over again. Recording from another video recorder With this video recorder you can make recordings from an external source, such as copying from another video recorder or a camcorder. Note In the following description, this video recorder will be one used for recording and will be referred to as VCR B. The other appliance will be used for playback and will be referred to as VCR A. 1 VCR A should be connected to the SCART socket on the rear panel of your unit or the AV sockets on the front panel of your unit. 2 Insert the recorded tape into VCR A and a blank tape into VCR B. 3 Press INPUT until the socket you wish to record from is displayed. (VCR B). AV 1 for recording from EURO AV1 SCART socket on the rear of your unit. AV 2 for recording from EURO AV2 SCART socket on the rear of your unit. AV 3 for recording from VIDEO IN and AUDIO IN (Left & Right) sockets on the front of your unit. 4 To start recording, press the RECORD on VCR B and PLAY B on VCR A. 5 When you want to finish copying, press the STOP 9 on both video recorders.

Symptom DVD or VCR do not work properly. No power. The power is on, but the DVD player does not work. No picture. No sound. The picture is poor. The DVD player does not start playback. The remote control does not work properly. Video tape cannot be inserted. No Hi-Fi sound No NICAM sound recording Cause ●DVD or VCR button is not switched properly. ●The power cord is disconnected. ●No disc is inserted. ●The TV is not set to receive DVD signal output. ●The video cable is not connected securely. ●The equipment connected with the audio cable is not set to receive DVD signal output. ●The audio cables are not connected securely. ●The power of the equipment connected with the audio cable is turned off. ●The Digital Audio Output is set to the wrong position. ●The disc is dirty. ●The TV channels are not tuned in properly. ●An unplayable disc is inserted. ●The disc is placed upside down. ●The disc is not placed within the guide. ●The disc is dirty. ●The Rating level is set. ●There is an obstacle in the path of the remote control and this unit. ●The batteries in the remote control are exhausted. ●Is the cassette compartment empty? ●Audio mode is not set properly. ●NICAM mode is not set properly. Correction ●Refer to page 6. ●Plug the power cord into the wall outlet securely. ●Insert a disc. ●Select the appropriate video input mode on the TV so the picture from the DVD player appears on the TV screen. ●Connect the video cable into the jacks securely. ●Select the correct input mode of the audio receiver so you can listen to the sound from the DVD player. ●Connect the audio cable into the jacks securely. ●Turn on the equipment connected with the audio cable. ●Set the Digital Audio Output to the correct position, then turn on the DVD player again by pressing POWER. ●Clean the disc. ●Check tuning, carry out tuning again. ●Insert a playable disc. (Check the disc type and Regional code.) ●Place the disc with the playback side down. ●Place the disc on the disc tray correctly inside the guide. ●Clean the disc. ●Cancel the Rating function or change the rating level. ●Remove the obstacle. ●Replace the batteries with new ones. ●Eject the tape in. ●Switch ‘AUDIO’ in the main menu to ‘STEREO’. ●Make sure NICAM in the menu is set to AUTO for the station to be recorded.

Enter the appropriate code number for the initial settings “LANGUAGE” (See page 18). Code Language 6566 Abkhazian 6565 Afar 6570 Afrikaans 8381 Albanian 6577 Ameharic 6582 Arabic 7289 Armenian 6583 Assamese 6588 Aymara 6590 Azerbaijani 6665 Bashkir 6985 Basque 6678 Bengali; Bangla 6890 Bhutani 6672 Bihari 6682 Breton 6671 Bulgarian 7789 Burmese 6669 Byelorussian 7577 Cambodian 6765 Catalan 9072 Chinese 6779 Corsican 7282 Croatian 6783 Czech 6865 Danish 7876 Dutch 6978 English 6979 Esperanto 6984 Estonian 7079 Faroese Code Language 7074 Fiji 7073 Finnish 7082 French 7089 Frisian 7176 Galician 7565 Georgian 6869 German 6976 Greek 7576 Greenlandic 7178 Guarani 7185 Gujarati 7265 Hausa 7387 Hebrew 7273 Hindi 7285 Hungarian 7383 Icelandic 7378 Indonesian 7365 Interlingua 7165 Irish 7384 Italian 7465 Japanese 7487 Javanese 7578 Kannada 7583 Kashmiri 7575 Kazakh 7589 Kirghiz 7579 Korean 7585 Kurdish 7679 Laothian 7665 Latin 7686 Latvian, Lettish Code Language 7678 Lingala 7684 Lithuanian 7775 Macedonian 7771 Malagasy 7783 Malay 7776 Malayalam 7784 Maltese 7773 Maori 7782 Marathi 7779 Moldavian 7778 Mongolian 7865 Nauru 7869 Nepali 7879 Norwegian 7982 Oriya 8065 Panjabi 8083 Pashto, Pushto 7065 Persian 8076 Polish 8084 Portuguese 8185 Quechua 8277 Rhaeto-Romance 8279 Rumanian 8285 Russian 8377 Samoan 8365 Sanskrit 7168 Scots Gaelic 8382 Serbian 8372 Serbo-Croatian 8378 Shona 8368 Sindhi Code Language 8373 Singhalese 8375 Slovak 8376 Slovenian 8379 Somali 6983 Spanish 8385 Sudanese 8387 Swahili 8386 Swedish 8476 Tagalog 8471 Tajik 8465 Tamil 8484 Tatar 8469 Telugu 8472 Thai 6679 Tibetan 8473 Tigrinya 8479 Tonga 8482 Turkish 8475 Turkmen 8487 Twi 8575 Ukrainian 8582 Urdu 8590 Uzbek 8673 Vietnamese 8679 Volapük 6789 Welsh 8779 Wolof 8872 Xhosa 7473 Yiddish 8979 Yoruba 9085 Zulu

Code Country/Area AD Andorra AE United Arab Emirates AF Afghanistan AG Antigua and Barbuda AI Anguilla AL Albania AM Armenia AN Netherlands Antilles AO Angola AQ Antarctica AR Argentina AS American Samoa AT Austria AU Australia AW Aruba AZ Azerbaidjan BA Bosnia-Herzegovina BB Barbados BD Bangladesh BE Belgium BF Burkina Faso BG Bulgaria BH Bahrain BI Burundi BJ Benin BM Bermuda BN Brunei Darussalam BO Bolivia BR Brazil BS Bahamas BT Bhutan BV Bouvet Island BW Botswana BY Belarus BZ Belize CA Canada CC Cocos (Keeling) Islands CF Central African Republic CG Congo CH Switzerland CI Ivory Coast CK Cook Islands CL Chile CM Cameroon CN China CO Colombia CR Costa Rica CS Former Czechoslovakia CU Cuba CV Cape Verde CX Christmas Island CY Cyprus CZ Czech Republic DE Germany DJ Djibouti DK Denmark DM Dominica DO Dominican Republic DZ Algeria EC Ecuador EE Estonia EG Egypt EH Western Sahara Code Country/Area ER Eritrea ES Spain ET Ethiopia FI Finland FJ Fiji FK Falkland Islands FM Micronesia FO Faroe Islands FR France FX France (European Territory) GA Gabon GB Great Britain GD Grenada GE Georgia GF French Guyana GH Ghana GI Gibraltar GL Greenland GM Gambia GN Guinea GP Guadeloupe (French) GQ Equatorial Guinea GR Greece GS S. Georgia & S. Sandwich Isls. GT Guatemala GU Guam (USA) GW Guinea Bissau GY Guyana HK Hong Kong HM Heard and McDonald Islands HN Honduras HR Croatia HT Haiti HU Hungary ID Indonesia IE Ireland IL Israel IN India IO British Indian Ocean Territory IQ Iraq IR Iran IS Iceland IT Italy JM Jamaica JO Jordan JP Japan KE Kenya KG Kyrgyzstan KH Cambodia6 KI Kiribati KM Comoros KN Saint Kitts & Nevis Anguilla KP North Korea KR South Korea KW Kuwait KY Cayman Islands KZ Kazakhstan LA Laos LB Lebanon Code Country/Area LC Saint Lucia LI Liechtenstein LK Sri Lanka LR Liberia LS Lesotho LT Lithuania LU Luxembourg LV Latvia LY Libya MA Morocco MC Monaco MD Moldavia MG Madagascar MH Marshall Islands MK Macedonia ML Mali MM Myanmar MN Mongolia MO Macau MP Northern Mariana Islands MQ Martinique (French) MR Mauritania MS Montserrat MT Malta MU Mauritius MV Maldives MW Malawi MX Mexico MY Malaysia MZ Mozambique NA Namibia NC New Caledonia (French) NE Niger NF Norfolk Island NG Nigeria NI Nicaragua NL Netherlands NO Norway NP Nepal NR Nauru NU Niue NZ New Zealand OM Oman PA Panama PE Peru PF Polynesia (French) PG Papua New Guinea PH Philippines PK Pakistan PL Poland PM Saint Pierre and Miquelon PN Pitcairn Island PR Puerto Rico PT Portugal PW Palau PY Paraguay QA Qatar RE Reunion (French) RO Romania RU Russian Federation RW Rwanda SA Saudi Arabia SB Solomon Islands Code Country/Area SC Seychelles SD Sudan SE Sweden SG Singapore SH Saint Helena SI Slovenia SJ Svalbard and Jan Mayen Islands SK Slovak Republic SL Sierra Leone SM San Marino SN Senegal SO Somalia SR Suriname ST Saint Tome and Principe SU Former USSR SV El Salvador SY Syria SZ Swaziland TC Turks and Caicos Islands TD Chad TF French Southern Territories TG Togo TH Thailand TJ Tadjikistan TK Tokelau TM Turkmenistan TN Tunisia TO Tonga TP East Timor TR Turkey TT Trinidad and Tobago TV Tuvalu TW Taiwan TZ Tanzania UA Ukraine UG Uganda UK United Kingdom UM USA Minor Outlying Islands US United States UY Uruguay UZ Uzbekistan VA Vatican City State VC Saint Vincent & Grenadines VE Venezuela VG Virgin Islands (British) VI Virgin Islands (USA) VN Vietnam VU Vanuatu WF Wallis and Futuna Islands WS Samoa YE Yemen YT Mayotte YU Yugoslavia ZA South Africa ZM Zambia ZR Zaire ZW Zimbabwe Enter the appropriate code number for the initial setting “Area Code” (See page 20).

Power consumption 17W Dimensions (approx.) 430 X 78.5 X 265 mm (w/h/d) Mass (approx.) 4.06 kg Operating temperature 5˚C to 35˚C (41˚F to 95˚F) Operating humidity 5 % to 90 % Timer 24 hours display type RF Modulator UHF 22-68 (Adjustable) System Laser Semiconductor laser, wavelength 650 nm Video Head system Double azimuth 6 heads, helical scanning. Signal system PAL Frequency response DVD (PCM 96 kHz): 8 Hz to 44 kHz DVD (PCM 48 kHz): 8 Hz to 22 kHz CD: 8 Hz to 20 kHz Signal-to-noise ratio More than 100dB (ANALOG OUT connectors only) Harmonic distortion Less than 0.008% Dynamic range More than 100 dB (DVD) More than 95 dB (CD) Inputs (VCR) Audio -6.0dBm, more than 10 kohms (SCART) -6.0dBm, more than 47 kohms (RCA) Video 1.0 Vp-p, 75 ohms, unbalanced (SCART/RCA) Outputs (DVD) VIDEO OUT 1 Vp-p 75 ohms, sync. negative COMPONENT VIDEO OUT (Y) 1 Vp-p 75 ohms, negative sync., RCA jack x 1 (Progressive Scan) (Pb)/(Pr) 0.7 Vp-p 75 ohms, RCA jack x 2 RGB output 0.7 Vp-p 75 ohms Audio output (digital audio) 0.5 V (p-p), 75 ohms, RCA jack x 1 Audio output (analog audio) 2.0 Vrms (1 kHz, 0 dB), 600 ohms, RCA jack (L, R) x 2/SCART (TO TV) Outputs (VCR) Audio -6.0dBm, less than 1 kohms (SCART) Video 1.0Vp-p, 75 ohms, unbalanced (SCART) RGB output 0.7 Vp-p 75 ohms Design and specifications are subject to change without notice. Manufactured under license from Dolby Laboratories.“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.