Philips DVDR600VR/37B Quick Use Manual

or coaxial cable from Cable Box To Power Outlet QUICK-USE GUIDE 12nc: 8239 300 33901 DVDR600VR 1 Remove the Antenna or Cable TV signal from your TV. Connect it to the ANTENNA IN jack at the rear of the Recorder. 2 Connect the supplied RF coaxial cable to the (Antenna) OUT jack on the Recorder and to your TV’s ANTENNA IN or RF INPUT jack. 3 Connect the Recorder’s power cord to a power outlet. Helpful Hint: If your TV has different connectors, refer to the TV manual for connection options. Also refer to the Recorder’s owner’s manual, which details other TV connection possibilities. Prepare the remote control Initial Setup screens will appear the first time you turn on the Recorder. 1 Press STANDBY-ON2 2 2 2 2 to turn on the Recorder. 2 Turn on the TV and select channel 3. NO PICTURE? Make sure the TV is on channel 3 if you used the simple connection shown in section 1 of this Quick-Use Guide. To use channel 4 or another Video channel at your TV, refer to the owner's manual for different connections. 3 The Initial Setup menu will appear. Use 3 or 4 to choose a setting for each item, then press OK to confirm. The following menus will appear: Menu Language • English, Español, Français – Select a language for the Recorder’s menus and on-screen displays. Audio Language • English, Español, Français, etc – Select a DVD audio language. Subtitle Language • English, Español, Français, etc – Select the language you prefer for DVD subtitles. TV Shape • 4:3 letterbox – Stretch the DVD picture with black bars on the top and bottom. • 4:3 panscan – See a full-height picture with the sides trimmed. • 16:9 – Use with widescreen TVs. (frame ratio 16:9) 4 After you have connected the Antenna or Cable TV signal to the Recorder’s ANTENNA IN jack, press OK. 5 Searching for TV Channels will appear. Once the TV channel search is complete, the number of channels found will appear. 6 Press SYSTEM MENU. The Recorder will turn off, then on again. The Recorder is ready for use! Complete Initial Setup Connect the Recorder 1 1 3 2 2 1 3 3 STANDBY-ON OK MENU MENU DISC SYSTEM CHANNEL TV/VIDEO OPEN/CLOSE DVD VCR CLEAR MONITOR VCR Plus+/TIMER RETURN SELECT PLAY STOP DVD REC VCR REC PLAY MODE MODE AUDIO DISPLAY T/C FSS SLOW MODE SEARCH MUTE VOLUME TV PAUSE 1 2 3 4 5 6 7 8 9 0 EJECT REC ~ Initial Setup Menu Language Press OK to continue English Español Français ~ Initial Setup Audio Language Press OK to continue English Español Français Português Italiano ~ Initial Setup Subtitle Language Press OK to continue English Español Français Português Italiano ~ Initial Setup TV Shape 4:3 letterbox 4:3 panscan 16:9 Press OK to continue Installation Auto Ch. Programming Auto ch. search complete 024 Channels found To exit press SYSTEM MENU 3-4 1 6 2 STANDBY-ON POWER ON STOP/EJECT PLAY REW F.FWD RECORD CHANNEL D.DUBBING DVD OPEN/CLOSE SOURCE STOP PLAY RECORD IR VCR DVD ONE TOUCH RECORDING · LONG PLAY 4 HEAD HI-FI STEREO DV PROGRESSIVE SCAN DVD RECORDER DVD+RW/+R RECORDING IS TV ON? CO3 DVDR600VR_QUG.fm 04.7.22, 1:29 PM 1

4 HEAD HI-FI STEREO DV PROGRESSIVE SCAN LABEL DVD RECORDER ALL 1 SUPER VIDEO MENU MENU DISC SYSTEM TV/VIDEO OPEN/CLOSE DVD VCR CLEAR VCR Plus+/TIMER RETURN SELECT VCR REC PLAY MODE MODE AUDIO DISPLAY T/C FSS SLOW MODE SEARCH MUTE VOLUME TV 1 2 3 4 5 6 7 8 9 0 EJECT REC PLAY STOP STANDBY-ON OK MONITOR DVD REC PAUSE CHANNEL 1 2 5 3 4 7 6 STANDBY-ON POWER ON STOP/EJECT PLAY REW F.FWD RECORD CHANNEL D.DUBBING DVD OPEN/CLOSE SOURCE STOP PLAY RECORD IR VCR DVD ONE TOUCH RECORDING · LONG PLAY 4 HEAD HI-FI STEREO DV PROGRESSIVE SCAN LABEL DVD RECORDER ... cont. 1 Press DVD to put the Recorder in DVD mode. 2 Press OPEN/CLOSE/EJECTç to open the disc tray. Insert a recordable DVD+RW/DVD+R with the label facing up, then press OPEN/CLOSE/EJECTçto close the disc tray. 3 Press 4 to select the last empty Title box on a DVD+RW. 4 Press MONITOR to see TV channels. 5 Press CHANNEL 3 4 or the Number buttons to select the channel you wish to record. 6 Press DVD REC 0 to start recording. • During recording, you may press PAUSE to pause the recording. Press DVD REC 0 to continue. 7 To stop recording, press STOP 9. To play a DVD+R on other DVD Players, you must finalize it first. 1 Press SYSTEM MENU. Press A to select in the top left corner of the menu bar. 2 Press 4 to select in the menu and press B. 3 Press 4 to select Finalize disc, then press OK. Once a DVD+R is finalized, no recording or editing is possible. Unfinalizing a DVD+R is not possible. Quick Disc Recording Quick Disc Play Detailed playback features and additional functions are described in the accompanying owner’s manual. 5 1 Press DVD to put the Recorder in DVD mode. 2 Insert a disc with the label facing up. Press PLAY 2 to close the disc tray. 3 Play may start automatically. If you are playing a DVD, a Disc menu may appear. Press 1 23 4 to choose a setting. Then press OK to confirm. If you are playing an Audio CD, press PLAY 2 to start play. If you are playing a DVD+RW/DVD+R, the Index Picture Screen will appear. Press 3 or 4 to select a Title, then press OK to start play. 4 To stop play, press STOP 9. NO SOUND? Connect the AUDIO OUT L/R jacks at the back of the Recorder to the AUDIO IN jacks on a TV, stereo or receiver. Turn on the other equipment and select the appropriate channel or sound source. Quick Videotape Play (not illustrated) 6 1 Press VCR to put the Recorder in VCR mode. 2 Turn on the TV. Set it to Channel 3. 3 Insert a videotape in the cassette compartment and press PLAY 2. 4 To stop playback, press STOP 9. 4 E9480UD / 1VMN20182 ***** 5 4 DVDR600VR_QUG.fm 04.7.22, 1:29 PM 2