Philips DVDR3430V Operation & User’s Manual

Dubbing Direct Dubbing (Disc î Tape) .....................................................................................33 Dubbing from VCR to DVD ............................................................................................................................33 Dubbing from DVD to VCR ............................................................................................................................33 Playback DVD Playback ............................................................................................................ 34-38 Playa ...

TIPS: Before making or changing any connections, make sure that all the devices are disconnected from the power outlet. Connecting the audio cables This connection enables you to listen to the playback from the recorder. However, this connection is not required if the recorder is connected to the TV using the SCART cable. Option 1: Using an audio cable You can connect the recorder to a two channel stereo system (mini system, TV) or receiver in order to enjoy the stereo sound system. z Use an audio cable (red/white ends - not supplied) t ...

This function allows you to make a recording with a preset length easily without using the timer programming. A Press P +- to select the programme number to record, for example ‘P01’. B Press DVD or VCR to select the destination of recording. C Insert a recordable DVD or VHS tape into the recorder. Î For VHS tape, locate the start point position for recording. D Set a recording mode as necessary by pressing REC MODE repeatedly. E Press REC z repeatedly to select the recording time length. Each subsequent press increases the reco ...

Mains plug This apparatus is fi tted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: 1 Remove fuse cover and fuse. 2 Fix new fuse which should be a BS1362 5 Amp, A.S.T.A. or BSI approved type. 3 Refi t the fuse cover. If the fi tted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fi tted in its place. If the mains plug contains a fuse, this should have a value of 5 Amp. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp. No ...