Philips DVDR3545V Operation & User’s Manual

VIDEO CASSETTE RECORDER WITH DIGITAL TUNER Register your product and get support at www.philips.com/welcome DVDR3545V STOP ARRÊT ALTO 1-866-771-4018 1-866-771-4018 1-866-771-4018 Recording Playback Editing Introduction Connections Basic Setup Function Setup VCR Functions Others

so don't miss out. Complete and return your Product Registration Card at once, or register online at www.philips.com/welcome to ensure: Return your Product Registration Card or register online at www.philips.com/welcome today to get the very most from your purchase. Know these safety symbols CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN *Proof of Purchase Returning the enclosed card guar- antees that your date of purchase will be on file, so no additional paperwork will be required from you to obtain warranty service. *Product Safety Notification By registering your product, you'll receive notification - directly from the manufacturer - in the rare case of a product recall or safety defect. *Additional Benefits Registering your product guar- antees that you'll receive all of the privileges to which you're entitled, including special money- saving offers. Visit our World Wide Web Site at http://www.philips.com/welcome For Customer Use Enter below the Model and Serial numbers which are located on the rear of the cabinet. Retain this information for future reference. Model No. ______________________________________ Serial No. ______________________________________ This “bolt of lightning” indicates uninsulated material within your unit may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering. The “exclamation point” calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems. WARNING: To reduce the risk of fire or electric shock, this apparatus should not be exposed to rain or moisture, and objects filled with liquids, such as vases, should not be placed on this apparatus. CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert. ATTENTION: Pour éviter les chocs électriques, introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu’au fond. Congratulations on your purchase, and welcome to the “family!” Dear PHILIPS product owner: Thank you for your confidence in PHILIPS. You’ve selected one of the best-built, best- backed products available today. We’ll do everything in our power to keep you happy with your purchase for many years to come. As a member of the PHILIPS “family,” you’re entitled to protection by one of the most comprehensive warranties and outstanding service networks in the industry. What’s more, your purchase guarantees you’ll receive all the information and special offers for which you qualify, plus easy access to accessories from our convenient home shopping network. Most importantly, you can count on our uncompromising commitment to your total satisfaction. All of this is our way of saying welcome - and thanks for investing in a PHILIPS product. P.S. To get the most from your PHILIPS purchase, be sure to complete and return your Product Registration Card at once, or register online at: www.philips.com/welcome

NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. ANTENNA LEAD IN WIRE ANTENNA DISCHARGE UNIT (NEC SECTION 810 20) GROUNDING CONDUCTORS (NEC SECTION 810 21) GROUND CLAMPS POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H) GROUND CLAMP ELECTRIC SERVICE EQUIPMENT Example of Antenna Grounding as per NEC - National Electric Code IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and third grounding prong. The wide blade or third prong are provided for your safety. When the provided plug does not fit into your outlet, consult an elec- trician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combi- nation to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power- supply cord or plug is damaged, liquid has been spilled or objects have fallen into apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. This product may contain lead and mercury. Disposal of these materi- als may be regulated due to environmental considerations. For dis- posal or recycling information, please contact your local authorities or the Electronic Industries Alliance: www.eiae.org 16. Damage Requiring Service - The appliance should be serviced by qualified service personnel when: A. The power supply cord or the plug has been damaged; or B. Objects have fallen, or liquid has been spilled into the appliance; or C. The appliance has been exposed to rain; or D. The appliance does not appear to operate normally or exhibits a marked change in performance; or E. The appliance has been dropped, or the enclosure damaged. 17. Tilt/Stability - All televisions must comply with recommended inter- national global safety standards for tilt and stability properties of its cabinet design. ● Do not compromise these design standards by applying excessive pull force to the front, or top, of the cabinet which could ultimately overturn the product. ● Also, do not endanger yourself, or children, by placing electronic equipment/toys on the top of the cabinet. Such items could unsus- pectingly fall from the top of the set and cause product damage and/or personal injury. 18. Wall or Ceiling Mounting - The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer. 19. Power Lines - An outdoor antenna should be located away from power lines. 20. Outdoor Antenna Grounding - If an outside antenna is connected to the receiver, be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges. Section 810 of the National Electric Code, ANSI/NFPA No. 70- 1984, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding connectors, location of antenna-dis- charge unit, connection to grounding electrodes, and requirements for the grounding electrode. See Figure below. 21. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings. a) Warning: To reduce the risk of fire or electric shock, this apparatus should not be exposed to rain or moisture and objects filled with liquids, such as vases, should not be placed on this apparatus. 22. Battery Usage CAUTION - To prevent battery leakage that may result in bodily injury, property damage, or damage to the unit: ● Install all batteries correctly, with + and - aligned as marked on the unit. ● Do not mix batteries (old and new or carbon and alkaline, etc.). ● Remove batteries when the unit is not used for a long time. 23. Overloading - Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. 24. Object and Liquid Entry - Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. 25. Replacement Parts - When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. 26. Safety Check - Upon completion of any service or repairs to this prod- uct, ask the service technician to perform safety checks to determine that the product is in proper operating condition. AC Polarized Plug

To fully benefit from the support that Philips offers, register your product at www.philip.com/welcome. This product lets you record on DVD and cassette tape and play back DVD/CD/cassette tape. Read this user manual carefully to learn how to use the features described in this manual. Safety Precautions Warning: To prevent fire or shock hazard, do not expose this device to rain or moisture. Federal Communications Commission (FCC) Warning: Any unauthorized changes or modifications to this device void the user’s authority to operate it. • Do not stand the unit up vertically. Install the unit in a horizontal and stable position. • Be sure to remove the disc and unplug the AC power cord from the outlet before carrying the unit. Department of Health and Human Services (DHHS) Certification: Complies with 21 Center for Radiation (CFR) chapter 1 subchapter J applicable at time of manufacture. Laser Safety: This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury. CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT STARE INTO BEAM. THE BEAM IS LOCATED INSIDE, NEAR THE DECK MECHANISM. Special Information for Canadian Users: This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB- 003 du Canada. Radio/TV Interference: This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1) Reorient or relocate the receiving antenna. 2) Increase the separation between the device and the receiver. 3) Connect the device into an outlet on a circuit different from that to which the receiver is connected. 4) Consult the dealer or an experienced radio/TV technician for help. Copyright Notice: The making of unauthorized copies of copy-protected material, including computer programs, files, broadcasts and sound recordings, may be an infringement of copyrights and constitute a criminal offence. This device should not be used for such purposes. Copyright Protection: Unauthorized copying, broadcasting, public performance, and lending of Discs are prohibited. This product incorporates copyright protection technology that is protected by U S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited. Notice for Progressive Scan Use: Consumers should note that not all high definition television sets are fully compatible with this product and may cause artifacts to be displayed in the picture. In case of picture problems with 525 (480) progressive scan output, it is recommended that the user switch the connection to the ‘standard definition’ output. If there are questions regarding your TV set compatibility with this 525p (480p) DVD player, please contact our customer service center. Declaration of Conformity Model Number: DVDR3545V Trade Name: Philips Responsible Party: P&F USA, Inc. P.O. Box 672768 Marietta, Georgia 30006 1-866-771-4018 Copyright 2009 Philips. All rights reserved.

RCA audio/video cables user manual quick start guide For safety and optimum performance of this unit: • Install the unit in a horizontal and stable position. Do not place anything directly on top of the unit. Do not place the unit directly on top of the TV. • Shield it from direct sunlight and keep it away from devices of intense heat. Avoid dusty or humid places. Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes on the sides of the unit. Avoid locations subject to strong vibration or strong magnetic fields. Servicing • Please refer to relevant topics on “TROUBLESHOOTING” on pages 107-111 before returning the product. • If you need to call a customer service representative, please know the model number and serial number of your product before you call. This information is displayed on the back of the product. Also, please take a moment to identify the problem you are having, and be prepared to explain this to the representative. If you believe the representative will need to help you with operations, please stay near the product. Our representatives will be happy to assist you. For online reference, please visit our web site at http://www. philips.com/welcome Cleaning the cabinet • Wipe the front panel and other exterior surfaces of the unit with a soft, slightly damp cloth. • Never use a solvent, thinner, benzene or alcohol to clean the unit. Do not spray insecticide liquid near the unit. Such chemicals may discolor the surface or damage the unit. Cleaning discs • When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center to out. Do not wipe in a circular motion. • Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents or antistatic spray intended for analog records. Cleaning the disc lens • If this unit still does not perform properly although you refer to the relevant sections and to “TROUBLESHOOTING” in this user manual, the laser optical pickup unit may be dirty. Consult your dealer or an Authorized Service Center for inspection and cleaning of the laser optical pickup unit. Disc handling • Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs. • Always store the disc in its protective case when it is not used. Dolby Digital Recording “Dolby® Digital Recording enables consumers to record high-quality video with stereo sound on recordable DVD discs. The technology, when utilized instead of PCM recording, also saves recordable disc space, allowing for higher video resolution or extended recording time on each DVD. DVDs created using Dolby Digital Recording will play back on all DVD-video players.” Note: This is true when the players are compatible with actual recordable DVD discs. Installation Location Maintenance Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. HDMI, the HDMI logo and High- Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. Moisture condensation may occur inside the unit when it is moved from a cold place to a warm place or after heating a cold room or under conditions of high humidity. Do not use this unit at least for 2 hours until its inside gets dry. Moisture Condensation Warning Auto head cleaning • Automatically cleans video heads as you insert or remove a cassette, so you can see a clear picture. • Playback picture may become blurred or interrupted while the TV program reception is clear. Dirt accumulated on the video heads after a long period of use, or the usage of rental or worn tapes can cause this problem. If a streaky or snowy picture appears during playback, the video heads in your unit may need to be cleaned. 1. Please visit your local Audio/Video store and purchase a good quality VHS video head cleaner. 2. If a video head cleaner does not solve the problem, please consult your dealer or an Authorized Service Center. Note • Remember to read the instructions along with the video head cleaner before use. • Clean video heads only when problems occur.

FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Symbols Used in this User Manual . . . . . . . . . . . . . . . . . . .9 FUNCTIONAL OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . 10 Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Front Panel Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Connections ANTENNA CABLE CONNECTION . . . . . . . . . . . . . . . . . . 15 RF MODULATOR CONNECTION. . . . . . . . . . . . . . . . . . . 16 CONNECTION TO A CABLE / SATELLITE BOX. . . . . . . 17 CONNECTION TO A TV. . . . . . . . . . . . . . . . . . . . . . . . . . . 18 CONNECTION TO AN AUDIO SYSTEM . . . . . . . . . . . . . 20 Basic Setup BEFORE YOU START. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Finding the Viewing Channel on Your TV . . . . . . . . . . 21 On-Screen Display / Menu. . . . . . . . . . . . . . . . . . . . . . . . . 22 Main Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Switching VCR / DVD Mode. . . . . . . . . . . . . . . . . . . . . . . . 25 How to Insert a Disc / Cassette Tape . . . . . . . . . . . . . . . 25 INITIAL SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 CHANNEL SETTING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Auto Channel Scan. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Adding / Deleting Channels . . . . . . . . . . . . . . . . . . . . . . . 28 SETTING THE CLOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Auto Clock Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Manual Clock Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Daylight Saving Time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 TUNER SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Switching Analog Mode / Digital Mode . . . . . . . . . . . . 32 Channel Selection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Selecting TV Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 DTV Closed Caption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Closed Caption Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Recording INFORMATION ON DVD RECORDING . . . . . . . . . . . . . 38 BEFORE RECORDING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Make Recording Compatible . . . . . . . . . . . . . . . . . . . . . . 39 Setting for Auto Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . 39 BASIC RECORDING & ONE-TOUCH TIMER RECORDING . . . . . . . . . . . . . . . . . 40 TIMER RECORDING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Hints for Timer Recording . . . . . . . . . . . . . . . . . . . . . . . . . 45 OVERWRITING UNNECESSARY TITLE . . . . . . . . . . . . . 46 Overwriting from the Beginning of the Title. . . . . . . . 46 Overwriting in the Middle of the Title. . . . . . . . . . . . . . 46 Hints for Overwriting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 SETTINGS FOR AN EXTERNAL DEVICE . . . . . . . . . . . . 48 Connection to an External Device. . . . . . . . . . . . . . . . . . 48 Recording from an External Device . . . . . . . . . . . . . . . . 49 DV DUBBING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Guide to DV and On-Screen Display . . . . . . . . . . . . . . . 50 DVC to DVD Dubbing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 DVC to VCR Dubbing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 BI-DIRECTIONAL DUBBING . . . . . . . . . . . . . . . . . . . . . . 53 SETTING A DISC TO PROTECT . . . . . . . . . . . . . . . . . . . . 55 PLAYING THE DISCS ON OTHER DVD PLAYERS . . . . 56 Finalizing a Disc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Auto Finalizing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

BASIC PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Direct Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Playback from the Title List . . . . . . . . . . . . . . . . . . . . . . . . 61 Playing Back an Audio CD and a CD-RW/-R with MP3/Windows Media™ Audio/JPEG Files. . . . . . 63 Playing Back a DivX® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 Using the Title / Disc Menu . . . . . . . . . . . . . . . . . . . . . . . . 66 Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 SPECIAL PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Resume Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Fast Forward / Fast Reverse Playback . . . . . . . . . . . . . . 67 Skipping TV Commercials During Playback. . . . . . . . . 67 Rapid Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 Step by Step Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 Slow Forward / Slow Reverse Playback. . . . . . . . . . . . . 68 Zoom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 Marker Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 Repeat Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 Random Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 Program Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 Slide Show. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 Title / Chapter Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 Track Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 Time Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 SELECTING THE FORMAT OF AUDIO AND VIDEO . . 74 Switching Subtitles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 Switching Audio Soundtrack . . . . . . . . . . . . . . . . . . . . . . 74 Switching Virtual Surround System . . . . . . . . . . . . . . . . 75 Switching Camera Angles . . . . . . . . . . . . . . . . . . . . . . . . . 75 Reducing Block Noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 Editing INFORMATION ON DISC EDITING. . . . . . . . . . . . . . . . . 76 Guide to a Title List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 Editing Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 EDITING DISCS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 Deleting Titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 Putting Names on Titles . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 Setting Chapter Marks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 Clearing Chapter Marks . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 Hiding Chapters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 Setting Pictures for Thumbnails. . . . . . . . . . . . . . . . . . . . 83 Dividing a Title. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 Putting Name on Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 Setting or Releasing Disc Protect . . . . . . . . . . . . . . . . . . 86 Erasing Disc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 Making Edits Compatible. . . . . . . . . . . . . . . . . . . . . . . . . . 88 Function Setup LIST OF SETTINGS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 SETUPS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 DivX® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 Reset All . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 VCR Functions VCR FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 Recording. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 One-touch Timer Recording (OTR) . . . . . . . . . . . . . . . . 105 Index Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 Time Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 Other Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 Others TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . 107 Frequently Asked Questions. . . . . . . . . . . . . . . . . . . . . . 111 LANGUAGE CODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112 GLOSSARY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113 SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114 LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . 115

that. The following features are offered with this unit. This unit is compatible with DVD+RW/DVD-RW, which are rewritable repeatedly and DVD+R/DVD-R, which are available for recording once. Even if you choose DVD- RW/DVD-R, these discs will automatically be recorded in the DVD+VR mode. Also, this unit allows you to record to the cassette tape. You can choose either one for your convenience. DVD mode VCR mode Up to 12 program recording: You can program the unit to record up to 12 programs within a one-month period. Daily or weekly program recordings are also available. One-touch timer recording (OTR): You can easily set a recording time as you prefer. Every time [REC I] is pressed during recording, the recording time will be increased by 30 minutes up to 6 hours for DVD, and 8 hours for VCR. The recording automatically stops when the recording time you set is reached or the disc is full. Dubbing mode: You can copy a DVD to a cassette tape or copy a cassette tape to a DVD. This function will be possible only if the DVD or a cassette tape is not copy protected. You cannot record on a cassette tape when its erase-pro- tection tab is removed. DV dubbing: This function helps you to easily dub the contents of the DVC (digital video camcorder) to DVD or cassette tape. Left channel stereo recording: This unit can record the sound of the left channel mon- aural input as left and right channels automatically (the input from the E1 and E2 only). DVD mode Automatic chapter mark setting: Chapter marks will be put on recordings as you set before attempting to record. Automatic title list making: The unit makes a title list with the index automatically. Recording Deleting titles: You can delete titles which you do not need anymore. Putting names on titles: You can put your favorite names on titles. Setting / clearing chapter marks: You can set / clear chapter marks on titles. Hiding chapters: To keep others from playing back some chapters without permission, you can hide chapters. Setting pictures for thumbnails: You can change pictures for thumbnails. Dividing titles: You can divide a title into 2 or more. Putting name on disc: You can put your favorite disc name. Editing DVD mode Theater surround sound in your home: When connecting the unit to an amplifier or a decoder which is compatible with Dolby Digital, you can experi- ence the theater surround sound from discs with sur- round sound system. Quick search for what you want to watch: You can easily find the part you want to watch using the search function. Search for a desired point on a disc by title, chapter or time. Virtual surround system: You can enjoy stereophonic space through your existing 2 channel stereo system. Playback Available for playing back discs on a regular DVD player: Recorded discs can be played back on regular DVD players, including computer DVD drives compatible with DVD-video playback. Although DVD+R are playable on other units without finalization in most cases, it is recommended to finalize in order to stabilize the performance. For DVD-RW/-R, you need to finalize the recorded discs to play on other DVD players. Compatibility DVD mode Progressive scan system Unlike conventional interlace scanning, the progressive scan system provides less flickering and images in higher resolution than that of traditional television signals. HDMI (High-Definition Multimedia Interface) You can enjoy clearer audio/video output when connecting this unit to a display device with an HDMI- compatible port. Others Playing back MP3/Windows Media™ Audio/JPEG/ DivX® files: You can enjoy MP3/Windows Media™ Audio/JPEG/DivX® files which are recorded on CD-RW/-R. DivX® files can also be recorded on DVD+RW/+R or DVD- RW/-R. VCR mode Quick search for what you want to watch: You can easily find the part you want to watch using the index search/time search functions. An index mark will be assigned at the beginning of each recording you make. For time search function, you can go to a specific point on a cassette tape by entering the exact amount of time you wish to skip.

To specify for what disc type each function is, we put the following symbols at the beginning of each item to operate. * DVD-RW/-R recorded in VR mode or non compatible recording format are not playable. * DVD-RW recorded in the mode other than +VR is not recordable on this unit unless you erase all contents in the disc (refer to page 87). * DVD-R recorded in the mode other than +VR is not recordable on this unit. Symbol For Recording, Playing Back, and Editing For Recording and Playing Back Description Description refers to DVD+RW Description refers to DVD+R Description refers to DVD-RW Description refers to DVD-R For Playback only Description refers to audio CD Description refers to DVD-video Description refers to DVD+R DL Description refers to CD-RW/-R with MP3 files Description refers to CD-RW/-R with Windows Media™ Audio files Description refers to CD-RW/-R with JPEG files Description refers to DVD+RW/+R, DVD-RW/-R and CD-RW/-R with DivX® files If you do not find any of the symbols listed above under the function heading, the operation is applicable to all media. Description refers to VHS tapes Use only cassettes marked VHS ( ) FEATURES

ONE TOUCH RECORD NG • LONG PLAY DVD RECORDER / VCR DVDR 3545V STANDBY-ON REW F FWD PLAY PLAY REC STOP EJECT STOP R C CHANNEL SOURCE VCR DVD OPEN/CLOSE SV VIDEO L-AUDIO-R DV 22 21 20 19 18 17 16 15 13 11 12 14 10* 9 7 5 8 6 1 2 3* 4 Front Panel (*) The unit can also be turned on by pressing these buttons or inserting a cassette tape. 1. y STANDBY-ON button (DVD/VCR) Press to turn on and off the unit. Red LED lights up when power is on. 2. Cassette compartment (VCR) Insert a cassette tape here. 3. OPEN/CLOSE A button (DVD)* Press to open or close the disc tray. 4. Disc tray (DVD) Place a disc when it is open. 5. DV input jack (E3) (DVD/VCR) Use to connect the DV output of external device with a DV cable. 6. AUDIO input jacks (E2) (DVD/VCR) Use to connect external device with an RCA audio cable. 7. VIDEO input jack (E2) (DVD/VCR) Use to connect external device with an RCA video cable. 8. SV input jack (E2) (DVD/VCR) Use to connect the S-video output of external device with an S-video cable. 9. DVD REC I button (DVD) Press once to start a recording. Press repeatedly to start the one-touch timer recording. 10. DVD PLAY B button (DVD)* Press to start or resume playback. 11. STOP C button (DVD) Press to stop playback or recording. Press to stop the proceeding timer recording in DVD. 12. DVD indicator Lights up when the DVD output mode is selected. 13. SOURCE button (DVD/VCR) Press to select the component you wish to operate. 14. VCR indicator Lights up when the VCR output mode is selected. 15. CHANNEL L / K buttons (DVD/VCR) Press to change the channel up and down. 16. Display Refer to “Front Panel Display” on page 14. 17. Infrared sensor window (DVD/VCR) Receive signals from your remote control so that you can control the unit from a distance. 18. VCR REC I button (VCR) Press once to start a recording. Press repeatedly to start the one-touch timer recording. 19. VCR PLAY B button (VCR) Press to start playback. 20. STOP/EJECT C A button (VCR) Press to remove the cassette tape from the cassette compartment. Press to stop cassette tape playback or recording. Press to stop the proceeding timer recording in VCR. 21. F.FWD D button (VCR) Press to rapidly advance the cassette tape, or view the picture rapidly in forward during playback (forward search). 22. REW E button (VCR) Press to rewind the cassette tape, or to view the picture rapidly in reverse during playback (rewind search).

N VIDEO OUT COMPONENT V DEO OUT DVD/VCR ANTENNA HDMI OUT 1 2 5 3 9 11 13 10 8 6 7 4 12 Rear Panel FUNCTIONAL OVERVIEW Note • Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit. • This unit does not have the RF modulator. 1. AC Power Cord (DVD/VCR) Connect to a standard AC outlet to supply power to this unit. 2. HDMI OUT jack (DVD only) Use an HDMI cable to connect to a display with an HDMI compatible port. 3. ANTENNA OUT jack (DVD/VCR) Use to connect an RF coaxial cable to pass the signal from the ANTENNA IN to your TV monitor. 4. ANTENNA IN jack (DVD/VCR) Use to connect an antenna. 5. AUDIO OUT jacks (DVD/VCR) Use to connect a TV monitor, AV receiver or other device with an RCA audio cable. 6. VIDEO OUT jack (DVD/VCR) Use to connect a TV monitor, AV receiver or other device with an RCA video cable. 7. VIDEO IN jack (E1) (DVD/VCR) Use to connect external device with an RCA video cable. 8. AUDIO IN jacks (E1) (DVD/VCR) Use to connect external device with an RCA audio cable. 9. S-VIDEO IN jack (E1) (DVD/VCR) Use to connect the S-video output of external device with an S-video cable. 10. COMPONENT VIDEO OUT jacks (DVD only) Use to connect a TV monitor with component video inputs with a component video cable. 11. S-VIDEO OUT jack (DVD only) Use to connect the S-video input of a TV monitor, AV receiver or other device with an S-video cable. 12. AUDIO OUT jacks (DVD only) Use to connect a TV monitor, AV receiver or other device with an RCA audio cable. 13. COAXIAL DIGITAL AUDIO OUT jack (DVD only) Use to connect an AV receiver, Dolby Digital decoder or other device with a digital audio coaxial input jack with a digital audio coaxial cable.

3 1 2 4 5 6 9 11 22 23 20 21 24 26 10 27 12 28 14 15 17 18 19 16 31 32 33 34 13 29 25 7 8 30 Keep in mind the following when using the remote control: • Make sure that there are no obstacles between the remote control and the infrared sensor window on the unit. • Remote operation may become unreliable if strong sunlight or fluorescent light is shining on the infrared sensor window of the unit. • Remote control for different devices can interfere with each other. Avoid using remote control for other device located close to the unit. • Replace the batteries when you notice a fall off in the operating range of the remote control. • The maximum operable ranges from the unit are as follows. - Line of sight: approx. 23 feet (7m) - Either side of the center: approx. 16 feet (5m) within 30° - Above: approx. 16 feet (5m) within 15° - Below: approx. 10 feet (3m) within 30° Install the batteries (AAAx2) matching the polarity indicated inside battery compartment of the remote control. Note Incorrect use of batteries can result in hazards such as leakage and bursting. Please observe the following: • Do not mix new and old batteries together. • Do not use different kinds of batteries together. Although they may look similar, different batteries may have different voltages. • Make sure that the + and - ends of each battery match the indications in the battery compartment. • Remove batteries from battery compartment that is not going to be used for a month or more. • When disposing of used batteries, please comply with governmental regulations or environmental public instruction’s rules that apply in your country or area. • Do not recharge, short-circuit, heat, burn or disassemble batteries. DVD RECORDER 4 HEAD H -FI STEREO O E OU H R C RD G ONG L Y DVD R COR ER / CR DV R 35 5V S AN BY N W F F D P AY L Y EC S O E E T T P R C H N EL S UR E V R D D P N L S V I EO L A D O R V 16feet (5m) 30˚ 16feet (5m) 30˚ 23feet (7m) 1 Open the cover. 2 Insert batteries. Make sure to match + and - on the batteries to the marks indicated in the battery compartment. 3 Close the cover. Remote Control Installing the Batteries in the Remote Control

• Press to turn the unit on and off. 2. DTV/TV button (DVD/VCR) • Press to switch between digital TV (DTV) mode and analog TV (TV) mode. 3. SOURCE button (DVD/VCR) • Press to select the appropriate input. 4. HDMI button (DVD) • Press to set the HDMI connector’s video signal out- put mode. 5. DISC MENU button (DVD) • Press to display the disc menu. 6. AUDIO button (DVD/VCR) DTV mode: • Press to switch the audio language for digital TV. DVD mode: • Press to display the audio menu during playback. VCR mode: • During playback of a Hi-Fi videotape, press to change the audio out setting. 7. Cursor K / L / { / B buttons (DVD/VCR) • Press to select items or settings. 8. PLAY B button (DVD/VCR) • Press to start playback or resume playback. 9. BACK button (DVD/VCR) • Press to return to the previously displayed menu screen. 10. REW E button (DVD/VCR) DVD mode: • During playback, press to fast reverse playback. • When playback is paused, press to slow reverse playback. VCR mode: • During playback, press to rewind the cassette tape or to view the picture rapidly in reverse. 11. PAUSE F button (DVD/VCR) • Press to pause playback or recording. 12. PREV button (DVD) • During playback, press to return to the beginning of the current chapter, track or file. • When playback is in pause, press repeatedly to reverse the playback step by step. 13. REC I button (DVD/VCR) • Press once to start a recording. • Press repeatedly to start the one-touch timer recording. 14. SKIP button (DVD) • During playback, press to skip 30 seconds. 15. RAPID PLAY button (DVD) • During playback, press to play back in a slightly faster/slower mode with keeping the audio quality. 16. Number/Character buttons (DVD/VCR) • Press to select channel numbers. • Press to select a title/chapter/track/file on display. • Press to enter values for the settings in the main menu. • Press to enter title names. • Press to start the index/time search in VCR mode. 17. CLEAR button (DVD/VCR) DVD mode: • Press to clear the password once entered or to can- cel the programming for CD or to clear the selected marker number, etc. VCR mode: • Press to reset the tape counter. 18. REC MODE button (DVD/VCR) • Press to switch the recording mode. 19. TIMER button (DVD/VCR) • Press to display the timer programming list. 20. VCR button • Press to select the VCR output mode. 21. DVD button • Press to select the DVD output mode. 22. OPEN/CLOSE A button (DVD/VCR) DVD mode: • Press to open or close the disc tray. VCR mode: • Press to remove the cassette tape from the cassette compartment. 23. TITLE button (DVD) • Press to display the title list. 24. SETUP button (DVD/VCR) • Press to display the main menu. • During DVD playback, press and hold for more than 3 seconds to switch the progressive scanning mode to the interlace mode. 25. OK button (DVD/VCR) • Press to confirm or select menu items. 26. INFO button (DVD/VCR) • Press to display the display menu on or off. 27. FFW D button (DVD/VCR) DVD mode: • During playback, press to fast forward playback. • When playback is paused, press to slow forward playback. VCR mode: • During playback, press to rapidly advance the cassette tape or view the picture rapidly in forward. • When playback is paused, press to view the cassette tape in slow motion. 28. NEXT button (DVD) • During playback, press to skip to the next chapter, track or file. • When playback is in pause, press repeatedly to for- ward the playback step by step. 29. STOP C button (DVD/VCR) • Press to stop playback or recording. DVD mode: • Press to exit from the title list. 30. DIRECT DUBBING button (DVD/VCR) • Press to start VCR to DVD (DVD to VCR) duplication which you set in the main menu. 31. CH / buttons (DVD/VCR) DVD mode: • Press to change the channel up and down. VCR mode: • Press to change the channel up and down. • Press to adjust the tracking during playback or in slow motion of the cassette tape. • While playback is in still mode, you can adjust the picture blurred vertically. 32. Confirm ( • ) button (DVD/VCR) Analog mode: • Press to confirm the channel selection made by [the Number buttons]. Digital mode: • Press to confirm the major / minor channel selection made by [the Number buttons]. 33. SEARCH button (VCR) • Press to call up the index or time search menu. 34. TIMER SET button (DVD/VCR) • Press to set the unit in the timer standby mode. In the timer standby mode, press to cancel the mode and to turn the unit on. Note • If you turn off this unit, [OPEN/CLOSE A] on the remote control is not available. Be sure to use [OPEN/CLOSE A] or [STOP/EJECT C A] on the unit.

written on a disc. Appears when a disc is loaded on the disc tray. Appears when the disc tray is closing. Appears when the disc tray is opening. Display Message Appears when HDMI output mode (720p) is selected. Appears when HDMI output mode (1080p) is selected. Appears when HDMI output mode (480p) is selected. Appears when HDMI output mode (1080i) is selected. FUNCTIONAL OVERVIEW Front Panel Display PM DTV VCR DB DVD 1 5 3 4 2 1. PM : Appears in the afternoon with the clock display. 2. DTV : Appears when the channel is in DTV mode. 3. Title / track / file and chapter mark : Appears when indicating a title / track / file number. : Appears when indicating a chapter number. 4. Current status of the unit : Appears when playback is in pause, or in step by step playback. : Appears when playing back a disc, or a cassette tape. : Appears during slow forward / reverse playback. : Appears when the timer programming or OTR has been set or is proceeding. : Flashes when all timer recordings have been finished. : Flashes when there is an error in programming. : Appears during recording process. : Flashes when a recording is in pause. : Appears when this unit is in DVD output mode and a disc is in the unit. : Appears during duplication process. : Appears when this unit is in VCR output mode and a cassette tape is in the unit. : Appears during duplication process. VCR : Appears when this unit is in VCR output mode. : Appears when the timer recording is proceeding in VCR. : Appears when VCR is in the timer recording standby mode. : Flashes when a program cannot be performed for some reasons. DVD : Appears when this unit is in DVD output mode. : Appears when the timer recording is proceeding in DVD. : Appears when DVD is in the timer recording standby mode. : Flashes when a program cannot be performed for some reasons. DB : Appears during VCR to DVD duplication process. : Appears during DVD to VCR duplication process. 5. Displays the following • Elapsed playback time • Current title / chapter / track /file number • Recording time / remaining time • Clock • Selected channel number • Remaining time for one-touch timer recording • Selected HDMI OUTPUT mode • VCR tape counter

This section describes how to connect your unit to an antenna, cable box, etc. * Once connections are completed, turn on the TV and begin initial setting. Channel scanning is necessary for the unit to memorize all available channels in your area. (Refer to “INITIAL SETTING” on page 26.) Note • For your safety and to avoid damage to the device, please unplug the RF coaxial cable from the ANTENNA IN jack before moving the unit. • If you use an antenna to receive analog TV, it should also work for DTV reception. Outdoor or attic antennas will be more effective than set-top versions. • Antenna out is for tuner pass through only. DVD playback through the RF is not possible. 4 Plug in the power cord of this unit and your TV to the AC outlet. 1 Disconnect the power cord of your TV from the AC outlet. 2 Disconnect RF coaxial cable from antenna input jack of your TV. 3 Connect cables to the unit. Make the basic connection as illustrated below. Supplied cables used in this connection are as follows: • RF coaxial cable x 1 • RCA audio cable (L/R) x 1 • RCA video cable x 1 Please purchase the rest of the necessary cables at your local store. rear of your TV rear of this unit connect ANT IN VHF / UHF antenna cable TV company RF coaxial cable or rear of your TV disconnect disconnect 1 2 HDMI OUT L R L R OU IN IN -- AUD O - OUT N - V DEO - OUT DVD/VCR ANTENNA rear of this unit AUDIO IN L R VIDEO IN rear of your TV This connection is for TV loop through only OUT IN ANTENNA IN L R S-VIDEO IN --- AUDIO --- OUT IN --- VIDEO --- OUT DVD/VCR VHF / UHF antenna cable TV company RF coaxial cable or ANT IN RF coaxial cable RCA audio cable RCA video cable

If your TV has antenna in jack only, it is still possible to connect this unit to your TV by using a commercially available stereo audio/video RF modulator. In this case, follow the instructions below. 1) Disconnect the power cords of the devices from the AC outlet. 2) Make the connection as illustrated below. 3) Set your RF modulator’s channel 3/4 switch to either 3 or 4, whichever the TV channel is least used in your area. If your RF modulator has a modulator/antenna switch, set it according to the manual supplied with the RF modulator. 4) Plug in the power cords of the devices to the AC outlet. 5) Turn on your TV and choose the same channel as you set the RF modulator’s channel 3/4 switch to. For more details, follow the manual supplied with the RF modulator. Note • RF modulator is not supplied with this unit. You need to purchase it at your local store. • The quality of picture may become poor if this unit is connected to an RF modulator. Supplied cables used in this connection are as follows: • RF coaxial cable x 1 • RCA audio cable (L/R) x 1 • RCA video cable x 1 Please purchase the rest of the necessary cables at your local store. HDMI OUT N L R L R OU IN S VIDEO IN - AUD O - OUT N -- V DEO - OUT DVD/VCR ANTENNA rear of your RF modulator AUDIO IN ANT. IN TO TV L R CHANNEL 4 3 VIDEO IN Set channel 3 or 4 rear of this unit OUT IN ANTENNA IN L R S-VIDEO IN --- AUDIO --- OUT IN --- VIDEO --- OUT DVD/VCR VHF / UHF antenna cable TV company RF coaxial cable or RF coaxial cable RCA audio cable RCA video cable rear of your TV ANT. IN

1) Disconnect the power cords of the devices from the AC outlet. 2) Make the connection as illustrated below. 3) Plug in the power cords of the devices to the AC outlet. Note • Required cables and connecting methods differ depending on the cable/satellite box. For more information, please contact your cable/satellite provider. • Instead of using video out jack of this unit, you can also use S-VIDEO OUT jack, COMPONENT VIDEO OUT jack, or HDMI OUT jack (DVD only)(no audio out jack connection required) for connecting to your TV. With this setup: • You can record any unscrambled channel by selecting the channel on the cable/satellite box. Be sure that the cable/satellite box is turned on. • You cannot record one channel while watching another channel. Supplied cables used in this connection are as follows: • RF coaxial cable x 1 • RCA audio cable (L/R) x 1 • RCA video cable x 1 Please purchase the rest of the necessary cables at your local store. HDM OUT N L R L R OUT N S VIDEO N -- AUDIO -- OUT IN - VIDEO UT DVD/VCR ANTENNA AUDIO IN L R VIDEO IN AUDIO OUT L R VIDEO OUT rear of your TV ANT. IN RF OUT satellite dish cable TV company or rear of this unit OUT IN ANTENNA IN L R S-VIDEO IN --- AUDIO --- OUT IN --- VIDEO --- OUT DVD/VCR RCA video cable ANT. IN RCA video cable e.g.) RF coaxial cable RF coaxial cable cable/satellite box RCA audio cable RCA audio cable RF coaxial cable This connection is for TV loop through only

Note for HDMI connection • A simple 1-cable connection with a device having an HDMI (high-definition multimedia interface) connector allows digital transfer of the digital images of DVD-video and other devices. When connecting with an HDMI cable, the audio signal will be output as the digital audio signal simultaneously, so you do not need the analog audio connection described above. Note • Connect this unit directly to the TV. If the RCA audio/video cables are connected to a VCR, pictures may be distorted due to the copy protection system. • You will not be able to hear the sound being output from DVD if you are not connecting DVD AUDIO OUT when you made either S-video or component video out connection. To set progressive scan mode, refer to page 99 • This unit is compatible with the progressive scan system. The feature provides you with the higher quality images than the traditional output system does. To utilize this feature, you must set “Progressive Scan” to “ON”. CONNECTION TO A TV Supplied cables used in this connection are as follows: • RCA audio cable (L/R) x 1 • RCA video cable x 1 Please purchase the rest of the necessary cables at your local store. S-VIDEO IN DVD D GITAL AUDIO OUT AUDIO OUT S VIDEO OUT COAXIAL L R Y PB /CB PR /CR COMPONENT VIDEO OUT DVD DIGITAL AUDIO OUT AUDIO OUT S VIDEO OUT COAXIAL L R Y PB /CB PR /CR COMPONENT V DEO OUT Y PB/CB PR/CR COMPONENT VIDEO IN (Green) (Blue) (Red) (Green) (Blue) (Red) H MI UT D D A D O OU OUT OUT N CO X A L Y P C P C R R N V DEO UT DE OU VD VCR AUDIO IN L R VIDEO IN N L R L R S VIDEO N AUDIO OUT IN VIDEO OUT DVD/VCR TV analog audio this unit or RCA audio cable RCA video cable Method 1 Method 2 TV this unit and DVD DIG TAL AUDIO OUT AUD O OUT COAX AL L R AUDIO IN L R DVD D GITAL AUDIO OUT AUDIO OUT S VIDEO COAXIAL L R Y P /CB PR /CR COMPONEN VIDEO OU

Press [HDMI] to select the HDMI output mode. The output mode changes as follows every time [HDMI] is pressed. Front Panel Display Video Output Signal 480 Progressive Press [HDMI] 720 Progressive Press [HDMI] 1080 interlaced Press [HDMI] 1080 Progressive Press [HDMI] • The HDMI mode that is not supported by display device will be skipped. CONNECTION TO A TV *HDMI: High Definition Multimedia Interface Copyright protection system To play back the digital video images of a DVD via an HDMI connection, it is necessary that both the player and the display device (or an AV amplifier) support a copyright protection system called HDCP (high-bandwidth digital content protection system). HDCP is copy protection technology that comprises data encryption and authentication of the connected AV device. This unit supports HDCP. Please read the operating instructions of your display device (or AV amplifier) for more information. Note • When using HDCP-incompatible display device, the image will not be viewed properly. • Among the devices that support HDMI, some devices can control other devices via the HDMI connector; however, this unit cannot be controlled by another device via the HDMI connector. • The audio signals from the HDMI connector (including the sampling frequency, the number of channels and bit length) maybe limited by the device that is connected. • Among the monitors that support HDMI, some do not support audio output (for example, projectors). In connections with device such as this unit, audio signals are not output from the HDMI output connector. • When this unit’s HDMI connector is connected to a DVI-D compatible monitor (HDCP compatible) with an HDMI- DVI converter cable, the signals are output in digital RGB. Audio recording format of the disc Dolby Digital setting of this unit Actual output DVD-video Dolby Digital PCM 2channel PCM Stream Dolby Digital LPCM PCM 2channel PCM Stream DivX® Dolby Digital PCM 2channel PCM Stream Dolby Digital MP3 / MP2 PCM 2channel PCM Stream For audio CD, and MP3 / Windows Media™ Audio files, 2 channel PCM will be output regardless of the “Dolby Digital” setting. *1 If the connected device is not compatible with HDMI BITSTREAM, audio will be output as PCM even if you select “Stream” in “Dolby Digital” setting. Refer to pages 101-102 for “HDMI” setting. Actual Output Modes by Media

• When you change the connections, all devices should be turned off. • Refer to the manual accompanying external devices for more information. 2 Channel Analog Audio Connection Digital Audio Connection Note • The audio source on a disc in a Dolby Digital multi channel surround format cannot be recorded as digital sound by an MD or DAT deck. • By connecting this unit to a Dolby Digital decoder, you can enjoy high-quality Dolby Digital multi channel surround sound as heard in the movie theaters. • Playing back a DVD using incorrect settings may generate noise distortion and may also damage the speakers. Supplied cables used in this connection are as follows: • RCA audio cable (L/R) x 1 Please purchase the rest of the necessary cables at your local store. Setting Setup >General Setting >Playback >Disc Audio > Dolby Digital Connection If output is Dolby Digital encoded audio, connect to a Dolby Digital decoder. Stream Connecting to an MD deck or DAT deck. PCM If not connected to any external devices. PCM * To complete these settings, refer to page 94. D D OUT O T N L R L Y PB CB PR CR R L R IN VI EO OUT DE OUT DVD VCR AUDIO IN L R N L R S VIDEO IN AUDIO OUT IN VIDEO OUT DVD/VCR DVD DIGITAL AUDIO OUT AUDIO OUT S VIDEO OUT COAXIAL L R Y PB /CB PR /CR COMPONENT VIDEO OUT stereo system audio analog audio input jacks RCA audio cable AUDIO OUT Dolby Digital decoder, MD deck or DAT deck D G TAL UD O O T UD O OUT S V D O O T N COA IA L R L Y B /C R C R R OU N S V DEO IN UD O OUT I V D O UT CO PO EN I EO UT NTE NA DVD DIGITAL AUDIO OUT AUDIO OUT S VIDEO OUT COAXIAL L Y PB /CB PR /CR COMPONENT VIDEO OUT COAXIAL digital audio coaxial input jack digital audio coaxial cable DIGITAL AUDIO OUT this unit or

After you have completed all the connections, you must find the viewing channel (external input channel) on your TV. 1 After you have made all the necessary connections, press [STANDBY-ON y] to turn on the unit. 2 Turn on your TV. • If connected to your VCR make sure it is switched off or in standby mode before proceeding. 3 Press “2” on the TV’s remote control, then press channel down button repeatedly until you see the “Initial Setup” menu. Initial Setup OSD Language English Français Español This is the correct viewing channel (external input channel) for the recorder. • For some TVs, there may be a button on the TV’s remote control that accesses the external input channel. It may be labeled “SOURCE”, “AV”, or “SELECT”. In such case, press it repeatedly. Refer to your TV’s user manual for details. • If more than 10 minutes have past since you have turned on the unit, you may see the PHILIPS screen saver instead of “Initial Setup” menu. PHILIPS screen saver: 4 Proceed to step 2 in “INITIAL SETTING” on page 26. Finding the Viewing Channel on Your TV Note • Video input selection varies for different brand’s models of TVs. • Consult your TV manufacturer if none of the above is successful.

SP(2Hr) 1:53 6 5 1 5 1 2 4 3 * This is an example screen only for explanation. Displayed items vary depending on the disc you inserted. 1. Indicates a disc type and format mode. 2. Indicates a channel number or selected external input channel. 3. Indicates a recording mode and possible recording time left. 4. Indicates an operation status. 5. Each icon means: : Search : Audio : Subtitle : Angle : Repeat : Marker : Noise Reduction : Zoom : Surround 6. Indicates the current title number/total number of titles, the current chapter number/total number of chapters, and time lapse of the current title playback/ total duration of the title. This unit uses the following on-screen displays and menus to guide you to the easy operations. The on-screen displays give you the information on the loaded disc, the disc/file in playback, or the HDMI status, etc. The menus allow you to change the various kinds of settings for playing back, recording, or editing to suite your preference. Guide to On-Screen Display / Menu DTV Program Guide English 1/2 A Day of Memories KABC A quarter-century ago, which may now qualify as the good old days of newspapering, run-of-paper sales accounted for 80 percent of the industry's advertising revenues. DTV 6.1 1 5 2 3 4 1. Broadcast station 2. Program title (max. 2 lines displayed) 3. Audio language (“Other” is displayed when the audio language cannot be acquired, or the acquired languages are other than English, Spanish or French.) 4. Program guide (max. 6 lines displayed) 5. Channel number Note • When the program guide is displayed in more than 7 lines, use [K / L] to scroll. • “No description provided” is displayed when the program guide is not provided. Disc Information / Menu The on-screen display changes in the following order as you press [INFO]. OFF DTV Program Guide (only in DTV mode) Disc Information/Menu (only in DVD mode) or VCR Information (only in VCR mode) Title Name Information (only in DVD mode) (only when DVD+RW/DVD+R/DVD-RW/DVD-R is in playback) or File Name Information (only in DVD mode) (only when a CD with MP3/Windows Media™ Audio/ JPEG/DivX® files is in playback) Windows Media™ Audio Tag Information (only in DVD mode) (only when a Windows Media™ Audio file is in playback) HDMI Information (only in DVD mode) (only for the images output through the HDMI output) DVD mode BEFORE YOU START

• First, artist name will be displayed. • If you press [INFO] one more time, title name will be displayed. Windows Media™ Audio Tag Information Video Info. : 480p YCbCr Audio Info. : Bitstream 2 1 4 3 * This is an example screen only for explanation. 1. Indicates the resolution of the HDMI output image. 2. Indicates the HDMI video format. 3. Indicates the HDMI audio format. 4. Indicates an operation status. HDMI Information BEFORE YOU START Title Name Information Title Name My Title 1 File Name Information File Name My File 1 1. Displays title/file name. Title/File Name Information 0:00:00 HIFI SP 12:00AM CH 21 Stereo 5 6 4 1 2 3 * This is an example screen only for explanation. Displayed items vary depending on the cassette tape you inserted. 1. Indicates current video status. 2. Indicates the current time. 3. Indicates a current channel number (or selected external input channel) and an audio status of the program. 4. Indicates a recording or playing back mode. 5. Indicates a tape counter. 6. Audio status of the current cassette tape. VCR mode VCR Information

Allows you to rename the disc. 2. Erase Disc: (DVD+RW/DVD-RW only) Allows you to erase all contents in the disc and format it. 3. Make Edits Compatible: (DVD+RW only) Allows you to memorize the editing status on the disc if you have added or deleted chapters, or made chapters hidden on this unit, and to effect it when playing back on the other unit. Finalize: (DVD+R/DVD-RW/-R only) Allows you to finalize a disc containing recorded titles. 4. Disc Protect : Allows you to protect a disc from accidental editing or recording. 5. Random Play: Allows you to activate the random playback feature. 6. Program Play: (audio CD only) Allows you to activate the program playback feature. 7. Slide Show: (JPEG files only) Allows you to select the display time of the slide show mode. Disc Edit Edit Disc Name Erase Disc Make Edits Compatible Disc Protect OFF ON 1 2 3 4 CD Playback Mode Random Play Program Play PBC (Video CD only) Slide Show 5 6 7 Disc Edit Edit Disc Name Finalize Disc Protect OFF ON 1 3 4 BEFORE YOU START Main Menu Press [SETUP] to display the main menu. Then use [K / L] to select a menu and press [OK] to display the menu. These menus provide entries to all main functions of the unit. Disc Edit / CD Playback Mode Disc Edit Edit Disc Name Erase Disc Finalize Disc Protect OFF ON 1 2 3 4 1. General Setting: To go to general setting menu. 2. Timer Programming: To program a timer recording. 3. Title List: To call up the title list. 4. Disc Edit: To set up the DVD setting. 5. CD Playback Mode: To set up the CD playback setting. • “CD Playback Mode” is available only when an audio CD, a CD-RW/-R with MP3 / Windows Media™ Audio / JPEG files is inserted into the unit. Setup Timer Programming Title List Disc Edit CD Playback Mode General Setting 1 2 3 4 5 General Setting Menu General Setting Playback Display Video Recording Clock Channel DivX HDMI Reset All Parental Lock Disc Audio Disc Menu Language Audio Language Subtitle Language Angle Icon Still Mode 1 2 3 4 5 6 7 8 9 10 3. Video: To set up the video setting. 4. Recording: To set up the unit to record to discs as you prefer. 5. Clock: To set up the clock of the unit as you need. 6. Channel: To adjust the channel setting of the unit as you prefer. 7. DivX: To set up the setting for the DivX® playback. 8. HDMI: To set up the HDMI connection setting. 9. Reset All: To reset the setting to the factory default. 10. :DVD :VCR Indicates the available mode for the selected function. 1. Playback: To set up the unit to play back discs as you prefer. 2. Display: To set up the OSD screen as you prefer.

to operate. DVD RECORDER 4 HEAD HI FI STEREO O E TOU H REC RD NG • L NG PL Y DVD RECORDER / VCR DVDR 354 V ST NDBY ON REW F WD P AY L Y R C S O / J CT S OP R C C AN EL SO RCE CR D D OP N C OS V I EO L AU IO R DV SOURCE VCR DVD DVD indicator VCR indicator SOURCE button VCR button DVD button DVD mode Press [SOURCE] on the front panel, or press [DVD] on the remote control. (Verify that the DVD indicator is lit.) VCR mode Press [SOURCE] on the front panel, or press [VCR] on the remote control. (Verify that the VCR indicator is lit.) Note • You cannot switch the mode while in the timer-standby mode. 1) Press [OPEN/CLOSE A] to open the disc tray. 2) Place the disc on the disc tray with its label side facing up. Align the disc to the disc tray guide. 3) Press [OPEN/CLOSE A] to close the disc tray. It may take a while to load the disc. To eject the disc: Press [OPEN/CLOSE A] to open the disc tray, then remove the disc before turning off the unit. 1) Insert a cassette tape as illustrated below. 4 HEAD H -FI STEREO O E OU H R C RD G ONG L Y Cassette compartment • Insert from the flap side first with the window side facing up. To eject the cassette tape: Press [STOP/EJECT C A] on the front panel or press [OPEN/CLOSE A] on the remote control. How to Insert a Disc How to Insert a Cassette Tape How to Insert a Disc / Cassette Tape Switching DVD / VCR Mode BEFORE YOU START

1 Follow the procedure in “Finding the Viewing Channel on Your TV” on page 21 to display the “Initial Setup” menu. 2 Use [K / L] to select your desired language, then press [OK]. Initial Setup OSD Language English Français Español 3 Use [K / L] to select the type of broadcasting signal, then press [OK]. Initial Setup Channel Preset Make sure the antenna is connected to “ANTENNA IN” jack. Antenna Cable (Analog) Cable (Analog / Digital) The unit will start getting channels available in your area. Antenna: (When using antenna) The channels broadcasted in analog TV and digital TV are automatically scanned and memorized. Only the receivable channels in the area will be memorized. Cable (Analog): (When using basic cable) The channels broadcasted in analog CATV are automatically scanned and memorized. Cable (Analog / Digital): (When using basic cable) The channels broadcasted in analog CATV and digital CATV are automatically scanned and memorized. Auto Presetting Now CH 1 4 Press [OK] to activate “Clock Setting”. Initial Setup Clock Setting - - - / - - / - - - - ( - - - ) - - : - - - - 5 Proceed to step 5 in “Manual Clock Setting” on page 31. • If a PBS (public broadcasting station) is available in your area, follow “Auto Clock Setting” on page 30.

following procedures. 1 Press [SETUP] and use [K / L] to select “General Setting”, then press [OK]. “General Setting” menu will appear. 2 Use [K / L] to select “Channel”, then press [OK]. “Channel” menu will appear. 3 Use [K / L] to select “Auto Channel Preset”, then press [OK]. 4 Use [K / L] to select the type of broadcasting signal, then press [OK]. Auto Channel Preset Antenna Cable (Analog) Cable (Analog / Digital) The unit will start getting channels available in your area. • When aerial antenna is connected, select “Antenna”. • When connected to CATV, select “Cable (Analog)” or “Cable (Analog/Digital)”. To cancel the auto channel preset during scanning: Press [BACK ] or [SETUP] to cancel. 5 When scanning is over, press [SETUP] to exit. To cycle through only the memorized channels, use [CH / ]. To select a channel directly (including the ones not memorized), use [the Number buttons]. Auto Channel Scan Note • If the auto channel preset is canceled during presetting, some channels not yet preset may not be received. • You cannot change the channel when either VCR or DVD is in any recording mode (basic recording, one- touch timer recording or timer recording).

(DTV or TV) to/from which you want to add/delete channels. 2 Press [SETUP] and use [K / L] to select “General Setting”, then press [OK]. “General Setting” menu will appear. 3 Use [K / L] to select “Channel”, then press [OK]. “Channel” menu will appear. 4 Use [K / L] to select “Manual Channel Preset”, then press [OK]. Auto Channel Preset Manual Channel Preset TV Audio Select • If you are adding or deleting analog TV/CATV channels, go to ANALOG to continue. • If you are deleting digital TV/CATV channels, go to DIGITAL to continue. Adding / Deleting Channels CHANNEL SETTING You may want to add or delete TV channels if your channel lineup changes or if you no longer watch some channels. Adding channel is only available for the analog TV channels. Make sure • You perform “Auto Channel Scan” before adding or deleting the channels.

delete. • Use [CH / ] to cycle through only the memorized channels. • Use [{ / B] to cycle through all the channels including the ones not memorized. • Use [the Number buttons] to select a channel directly. • When a memorized channel is selected, “Add” is checked and highlighted as a default. • When an unmemorized channel is selected “Delete” is checked and highlighted as a default. 6 Use [K / L] to select “Add” or “Delete”, then press [OK]. CH 2 Add Delete Manual Channel Preset Your setting will be activated and it will automatically switch to the next channel so that you can continue adding or deleting channels. 7 Press [SETUP] to exit. DIGITAL 5 Select the channel number to delete. • Only the major channel is displayed in “Manual Channel Preset” menu. (The channel number displayed in the parenthesis is a virtual channel number) • Use [CH / ] to cycle through only the memorized channels. • You cannot use [{ / B] for the digital TV channel selection. • Use [the Number buttons] to select a channel directly. • When a memorized channel is selected, “Add” is checked and highlighted as a default. • When an unmemorized channel is selected “Delete” is checked and highlighted as a default. 6 Use [K / L] to select “Delete”, then press [OK]. Then select the next channel to delete. • If the setting is complete, press [BACK ] to activate “Manual Channel Preset”. Add Delete DTV 2 (CH - - - ) Manual Channel Preset Your setting will be activated. WARNING: • For the digital TV channels, you cannot recover the deleted channels once they are deleted unless you perform the auto channel preset again. 7 Press [SETUP] to exit. CHANNEL SETTING

Set the clock before you try the timer programming. If a PBS (public broadcasting station) is available in your area, follow “Auto Clock Setting” below. If not, follow “Manual Clock Setting” on page 31. Note • The clock may set itself automatically after you connect the antenna/cable signal and plug in the power cord. • Only the analog PBS channel signal is effective for auto clock setting. • The unit receives the clock data at 12:00 a.m. / p.m. from the PBS channel when the power is off. 1 Press [SETUP] and use [K / L] to select “General Setting”, then press [OK]. “General Setting” menu will appear. 2 Use [K / L] to select “Clock”, then press [OK]. “Clock” menu will appear. 3 Use [K / L] to select “Auto Clock Setting”, then press [OK]. 4 Use [K / L] to select “Auto”, then press [OK]. Auto Clock Setting OFF Auto Manual 5 Press [SETUP] to exit. 6 Press [STANDBY-ON y] to turn off the unit. This unit will search for the time only when the power is off. Leave it off for several minutes to give this unit time to set the clock. Auto Clock Setting This unit can set the time and date automatically by referring to a PBS station. Make sure • The antenna/cable TV connections are correct. • Channels are set. (Refer to page 27.) • If this unit is connected to a cable/satellite box, select the local PBS station on them to set the clock automatically. 1 Select “Manual” at step 4, then press [OK]. 2 Use [the Number buttons] or [K / L] to enter your PBS channel number, then press [OK]. Set Channel No. CH 1 3 Press [SETUP] and turn off the unit. If the unit chooses an incorrect PBS channel, set the PBS channel manually by following the steps below.

1 Press [SETUP] and use [K / L] to select “General Setting”, then press [OK]. “General Setting” menu will appear. 2 Use [K / L] to select “Clock”, then press [OK]. “Clock” menu will appear. 3 Use [K / L] to select “Daylight Saving Time”, then press [OK]. 4 Use [K / L] to select “ON (MAR - NOV)”, “ON (APR - OCT)” or “OFF”, then press [OK]. Daylight Saving Time ON (MAR - NOV) ON (APR - OCT) OFF ON (MAR - NOV): Move forward one hour on the second Sunday in March and move back one hour on the first Sunday in November. ON (APR - OCT): Move forward one hour on the first Sunday in April and move back one hour on the last Sunday in October. 5 Press [SETUP] to exit. Daylight Saving Time When “Daylight Saving Time” is “ON”, the unit clock will automatically adjust the time in order to fit the daylight saving time. “ON (MAR - NOV)” has been selected as the default. 1 Press [SETUP] and use [K / L] to select “General Setting”, then press [OK]. “General Setting” menu will appear. 2 Use [K / L] to select “Clock”, then press [OK]. “Clock” menu will appear. 3 Use [K / L] to select “Clock Setting”, then press [OK]. 4 Use [K / L] to select calendar or time, then press [OK]. Clock Setting JAN / 01 / 2007 ( MON ) 12 : 00 AM 5 Use [{ / B] to select an item to set, and use [K / L] to select the contents to suit your preference, then press [OK] when you finish setting all the contents. Clock Setting JAN / 01 / 2007 ( MON ) 12 : 00 AM Your setting will be activated. The clock start counting when you press [OK]. 6 Press [SETUP] to exit. Note • Your setting will be canceled if you press [BACK ] before pressing [OK] at step 5. • Your clock setting will be lost if either there is a power failure or this unit has been unplugged for more than 30 seconds when you set the clock manually. • For setting the day, year, hour, and minute, [the Number buttons] can also be used. • You can set the built-in calendar from the year 2007 up to 2056. Manual Clock Setting

Digital Mode You can easily switch the analog TV (NTSC) and digital TV (ATSC) with the remote control. Press [DTV/TV] on the remote control. • The analog mode and digital mode switch alternately. Note • When you switch the analog mode to the digital mode, it may take about 10 seconds until the digital channel selection is completed. The following screen is displayed while switching the mode. Now Scanning DTV 125. 1 Channel Selection Enter the major and minor channel number with [the Number buttons] to select a channel you want to watch. For 1-digit number e.g.) 2-2 ch: major channel [0] + [2] or [2] + [•] minor channel [0] + [2], [2] + [•] or [2] + leave it for 2 seconds. For 2-digit number e.g.) 35-16ch: major channel [3] + [5] minor channel [1] + [6] • If you enter 1 digit for major channel and leave it for 2 seconds, the number will be taken as the major channel and lowest minor channel of the major channel will be displayed. • If there is no minor channel input, lowest minor channel of the major channel will be displayed. Note • It may take up to 5 to 7 seconds to switch the digital TV channels. • In digital TV broadcasting, 2 or more channels, called minor channels, are simultaneously broadcast on one main channel, called major channel. About digital TV broadcasting: With its high definition broadcast, digital broadcasting far surpasses analog broadcasting in both its picture and sound quality. What is the minor channel? By using high compression technology, digital broadcasting offers a service that enables multiple signals to send simultaneously. Therefore, you can select more than one program per major channel since digital broadcasting technology distinguishes between multiple channels broadcast by a signal network. : change automatically : change manually by using [CH / ] CH4-1 18:00 18:30 19:00 19:30 20:00 CH4-2 CH4-1 CH4-1 CH4-3 smallest CH smallest CH CH4-3 CH4 CH4-2 CH4-1 smallest CH smallest CH ATSC (digital mode) NTSC (analog mode) [Air Time] major channel minor channel Select channels by using [CH / ] or [the Number buttons] found on remote control. [CH / ] Use [CH / ] to change the channel. [the Number buttons] Press the channel number with [the Number buttons] to select a channel you want to watch. Enter the channel number with [the Number buttons] to select a channel you want to watch. For 1-digit number e.g.) 2 ch: [0] + [2], [2] + [•] or [2] + leave it for 2 seconds. For 2-digit number e.g.) 12ch: [1] + [2]

available audio languages. English 1/2 • When you press [AUDIO], selected language will be displayed on the TV screen. • Every time you press [AUDIO], the language will be switched. e.g.) English 1/3 ➔ Spanish 2/3 ➔ Other 3/3 • Available languages differ depending on the broadcast. • The language information display will automatically disappear. • When you record digital TV broadcasting, the audio language you have selected will be recorded. Note • You cannot change the audio language for the timer recording of digital TV broadcasting. • Pressing [AUDIO] does not control external device audio. • When there is only one audio channel on the broadcast, pressing [AUDIO] does not display anything. TUNER SETTINGS This section describes how to switch the TV audio. When you record a TV program, only the audio selected here will be recorded. Selecting TV Audio Digital TV

select “General Setting”, then press [OK]. “General Setting” menu will appear. 2 Use [K / L] to select “Channel”, then press [OK]. “Channel” menu will appear. 3 Use [K / L] to select “TV Audio Select”, then press [OK]. 4 Use [K / L] to select “Stereo” or “SAP”, then press [OK]. TV Audio Select Stereo SAP Stereo: Outputs main-audio. SAP (secondary audio program): Outputs sub-audio. 5 Press [SETUP] to exit. Note on recording analog TV audio • When you record an analog TV program available in second audio or stereo, you have to select either “Stereo” or “SAP” in “General Setting” menu beforehand. Refer to the following table to check an appropriate setting. Selected audio Broadcast audio Disc recording Audio output Stereo STEREO+SAP STEREO STEREO STEREO STEREO STEREO MONO+SAP MONO MONO MONO MONO MONO SAP STEREO+SAP SAP SAP STEREO STEREO STEREO MONO+SAP SAP SAP MONO MONO MONO TUNER SETTINGS Selecting TV Audio (cont’d) Analog TV

select “General Setting”, then press [OK]. “General Setting” menu will appear. 2 Use [K / L] to select “Display”, then press [OK]. 3 Use [K / L] to select “CC Style”, then press [OK]. OSD Language Screen Saver FL Dimmer CC Style V-Chip 4 Use [K / L] to select “DTV CC”, then press [OK]. CC Style DTV CC User Setting Font Size Font Style Edge Type Font Opacity Font Color Back Opacity Back Color 5 Use [K / L] to the desired DTV closed caption, then press [OK]. DTV CC OFF Service1 Service2 Service3 Service4 Service5 Service6 OFF: Select if you do not want DTV CC. This is the default. Service 1 to Service 6: Select one of these before changing any other item in the closed caption menu. Choose “Service 1” under normal circumstances. 6 Press [SETUP] to exit. TUNER SETTINGS DTV Closed Caption Digital TV Digital TV has its own closed captions called DTV CC. Use this menu to change the settings for DTV CC. Note • Even if you set “DTV CC” to anything other than “OFF”, its effect will temporarily be canceled while recording.

select “General Setting”, then press [OK]. “General Setting” menu will appear. 2 Use [K / L] to select “Display”, then press [OK]. 3 Use [K / L] to select “CC Style”, then press [OK]. OSD Language Screen Saver FL Dimmer CC Style V-Chip 4 Use [K / L] to select “User Setting”, then press [OK]. CC Style DTV CC User Setting Font Size Font Style Edge Type Font Opacity Font Color Back Opacity Back Color 5 Use [K / L] to select “ON”, then press [OK]. User Setting ON OFF TUNER SETTINGS Closed Caption Style Digital TV Digital TV can also change the style of its closed caption such as font, color or size, etc.

switch the setting for each item you want to set, then press [OK]. • When “User Setting” is set to “ON”, you can set the following items. CC style set by “User Setting” will be displayed. • The setting description for each item is shown below. Font size of the displayed caption can be switched as below. Font Size Middle Large Small Font style of the displayed caption can be switched as below. Font Style Style1 Style2 Style3 Style4 Style5 Style6 Style7 Style8 Edge type of the displayed caption can be switched as below. Edge Type None Raised Depressed Uniform L.Shadow R.Shadow Font opacity of the displayed caption can be switched as below. Font Opacity Solid Translucent Flash Font color of the displayed caption can be switched as below. Font Color Transparent White Black Red Green Blue Yellow Magenta Cyan Background opacity of the displayed caption can be switched as below. Back Opacity Solid Translucent Flash Background color of the displayed caption can be switched as below. Back Color Transparent White Black Red Green Blue Yellow Magenta Cyan 7 Press [SETUP] to exit. TUNER SETTINGS