Speco HHDO15D1G Instruction Manual

Speco Technologies is constantly developing product improvements. We reserve the right to modify product design and specifications without notice and without incurring any obligation. Rev. 11/01/2012 HHDO15D1G

◑ Precautions.................................................. 2, 3 ◑ Safety Instructions....................................... 4 ◑ Package Contents........................................ 5 ◑ Camera Installation...................................... 6-8 ◑ Specifications............................................... 9 ◑ Camera Dimension...................................... 10 ◑ Features....................................................... 11 ◑ OSD Menu Details....................................... 12-35 ◑ Trouble Shooting.......................................... 36

extreme temperature conditions. Do not touch the front lens of the camera. Never keep the camera pointed directly at strong light. Do not expose the camera to radioactivity. Do not install the camera under unstable lighting conditions. Do not drop the camera or subject it to physical shocks. Only use the camera under conditions where temperatures are between -4°F ~ +140°F. Be especially careful to provide ventilation when operating under high temperatures. This is one of the most important parts of the camera. Be careful not to leave fingerprints on the lens cover. It can cause malfunctions to occur. If exposed to radioactivity the CCD will fail. Severe lighting change or flicker can cause the camera to work improperly. Housing damage can compromise weatherproof ratings. NOTE * If the camera is exposed to spotlight or object reflecting strong light, smear or blooming may occur. * please check that the power satisfies the normal specification before connecting the camera.

DO NOT OPEN CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER(OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. ISO14001 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER(OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. ISO14001 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER(OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. ISO14001 The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. INFORMATION - This equipment has been tested and found to comply with limits for a Class A digital device, pursuant to part 15 of the FCC Rules & CE Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. WARNING - Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. This installation should be made by a qualified service person and should conform to all local codes. CAUTION : To prevent electric shock and risk of fire hazards: ☞Do NOT use power sources other than those specified.

Please handle this camera carefully : ◑ This camera should be installed by qualified personnel only ◑ There are no user serviceable parts inside ◑ Do not disassemble this camera other than to make initial adjustments ◑ Use a UL approved regulated 24 volt AC or 12 volt DC power supply ◑ Use appropriate low voltage power cable to prevent fire or electrical shock ◑ Please insure that your installation area can support the weight of the camera ◑ Do not use a strong or abrasive detergent when cleaning the camera ◑ Do not install near cooling or heating device

1) HHDO15D1G • 1 Video Test Connector, Power Jack • 1 Chameleon Cover • 1 Wrench • Set Screw - 3 Tapping Screws 4x40 - 3 Plastic Anchor

6 CAMERA INSTALLATION jvuulj{Gwv~lyGjhislG XUG~oluG|zpunGXYG}vs{zGkjGOŠ–•š›ˆ•›G–“›ˆŽŒG\WWG”hPG YUG~oluG|zpunGY[G}vs{zGhjGO[WG}–“›Gh”—šP ZUGjvuulj{G}pklvGjhislG T jvuulj{GiujGjhislG{vG{olGiujGqhjrUG kjGXY}Gw–žŒ™Gzœ——“ w–žŒ™Gp•—œ›Gaylk jŒ•›Œ™GaGORP ishjraOTP ylkORP w–žŒ™Gzœ——“ hjGY[}

BODY OUTER COVER TAPPING SCREW 4X40, 3EA VANDAL DOME BASE ASSEMBLY PLASTIC ANCHOR 6x30, 3EA

DC Auto Iris Varifocal Lens 2.8-10mm MODEL HHDO15D1G 1/3" PANASONIC 2.1Mega CMOS Sensor 2010(H) X 1092(V), 2.22M Pixels 1944(H) X 1092(V), 2.12M Pixels 1920 X 1080P (1080P / 30fps) Progressive Scan COLOR : 0.5 Lux @ F1.2 , 0.01 Lux(Sens-UP X60) BW : 0.3 Lux @ F1.2 , 0.001 Lux(Sens-UP X60) HD-SDI, CVBS 1080P / 720P More than 50dB (AGC off) f = 2.8mm ~ 10mm 2 Mega DC Auto Iris OFF/LOW/MIDDLE/HIGH AUTO,1/25~ 1/50.000 sec, x2~x30 OFF/Auto x2 ~ x30 1 ~ 100 Level Adjustable ON/OFF OFF/BLC/HSBLC OFF/ON COLOR/BW/AUTO/EXT ATW/AWC->SET/INDOOR/OUTDOOR/MANUAL OFF/LOW/MIDDLE/HIGH X64 (PIP) OFF/LOW/MIDDLE/HIGH OFF/8 Zone 3 Zone On/Off/Sensitivity/Area setting Dual POWER(DC12V/AC24V) DC : 250mA ±10% AC : 120mA ±10% -4°F~140°F(Humidity : 20%RH ~ 95%RH) -4°F~140°F(Humidity : 20%RH ~ 80%RH) 5.1" (Dia) * 3.46" (H) 1 Ibs HHDO15D1G (2.8-10mm) ■ Sensor Type Total Pixels Active Pixels Focal Length Drive Type AGC Shutter Speed Digital Slow Shutter(Sens-UP) Sharpness BLC/HSBLC LSC Day&Night White Balance DNR D-ZOOM ACCE Privacy Motion Detection Image Sensor Resolution Scanning System Min. Illumination Video Output HD Format S/N Ratio Lens Function Power Source Power Consumption Storage Temperature Operating Temperature Dimension(WxHxD) Weight Level Resoution

SPECO DNR technology utilizes both an adaptive 2D filter reducing noise in the brightness of the image and an adaptive 3D filter reducing noise caused by movement. The result is that HD-SDI camera supports Motion Adaptive DNR function that removes noise and greatly reduce motion blur. HD(High Definition) Surveillance HD-SDI Camera provides the superb surveillance conditions than normal VGA camera. ACCE(Adaptive Color & Contrast Enhanment) HD-SDI Image Enhancer source of the software can be activated. HD-SDI Image Enhancer improves the clarity of images taken in poor conditions such as fog, smoke, rain or snow. Applied to live or recorded color video, it delivers real-time results and displays visual details that would otherwise have been difficult to see. HLC(High Light Compensation) High Light Compensation function is especially effective for reading car number plates at night time. Users can select and define the required observation area for the target object and ignore strong highlight areas. Illumination With an Incredibly Minimum Illumination of Amazing 0.001Lux can Capture Good Images Even in Extremely Low Light Conditions and Related Noises are Significantly Reduced by the Ultra Advanced DNR(Digital Noise Reduction) Technology. Privacy Zone A "Privacy zone" can be set if you desire to block viewing of specific areas in the picture. Additional Functions OSD - On Screen Display menu Privacy Masking - 8 zones, Sens-Up - x60 times, Digital Zoom - x64 ☞ ☞ ☞ ☞ ☞ ☞ ☞ DNR Digital Reduction Noise 0.017 Lux Illumination Minimum High Definition HD Contrast Enhanment Adaptive Color ACCE DSP 3D-DNR OSD Privacy Zone HLC DNR Digital Reduction Noise 0.017 Lux Illumination Minimum High Definition HD Contrast Enhanment Adaptive Color ACCE DSP 3D-DNR OSD Privacy Zone HLC DNR Digital Reduction Noise 0.017 Lux Illumination Minimum High Definition HD Contrast Enhanment Adaptive Color ACCE DSP 3D-DNR OSD Privacy Zone HLC DNR Digital Reduction Noise 0.001 Lux Illumination Minimum High Definition HD Contrast Enhanment Adaptive Color ACCE DSP 3D-DNR OSD Privacy Zone HLC DNR Digital Reduction Noise 0.017 Lux Illumination Minimum High Definition HD Contrast Enhanment Adaptive Color ACCE DSP 3D-DNR OSD Privacy Zone HLC DNR Digital Reduction Noise 0.017 Lux Illumination Minimum High Definition HD Contrast Enhanment Adaptive Color ACCE DSP 3D-DNR OSD Privacy Zone HLC 3D-DNR Digital Reduction Noise 0.00001 Lux Illumination Minimum Resolution Horizontal 600 Wide Dynamic Range Digital WDR Backlight Compensation BLC DSP 3D-DNR OSD Smart-IR

How to Set Up the camera menu ΄Ͷ΅͑Ά΁͑;ͶͿΆ ͵ͶͷͲΆͽ΅͑΄Ͷ΅ ·ͺ͵Ͷ΀ ;ͲͿΆͲͽ ΀ͷͷ ͽ΀Έ͑ ;ͺ͵͵ͽͶ ͑ ΀ͷͷ ͳ΃ͺ͸͹΅ͿͶ΄΄ ͡ί͑͢͡͡ͽΖΧΖΝ͑΄ΖΝΖΔΥΒΓΝΖ ΀ͷͷ ͽ΀Έ͑ ;ͺ͵͵ͽͶ ͹ͺ͸͹ ΀ͷͷ ͽ΀Έ͑ ;ͺ͵͵ͽͶ ͹ͺ͸͹ ΀ͷͷ ͵ͶͷͲΆͽ΅ ΄ͶͽͶʹ΅ Ͳ΃ͶͲ͑͢ί͑Ͳ΃ͶͲͥ ΁΀΄ͺ΅ͺ΀Ϳ ΄ͺ΋Ͷ ΃Ͷ΅͠Ͳ͸ͲͺͿ ΀ͷͷ ͽͶ·Ͷͽ ͳͽͲʹͼ͑;Ͳ΄ͼ ͵ͶͷͲΆͽ΅ ΃Ͷ΅ ͶͿ͵ Ͳ΅Έ ͲΈʹͯ͞΄Ͷ΅ ʹ΀ͽ΀΃ ͳΆ΃΄΅ ΀Ϳ͠΀ͷͷ ͽͶ·Ͷͽ ͑͡ί͑ͦ͑͢ͽΖΧΖΝ͑΄ΖΝΖΔΥΒΓΝΖ ΁΀΄ͺ΅ͺ΀Ϳ ΄ͺ΋Ͷ ΃Ͷ΅͠Ͳ͸ͲͺͿ ΀ͷͷ ͺ΃͑ͽͶ͵ ͺ΃͑΁Έ; ͵ͶͽͲΊ ͵ͶͽͲΊ ͵͑ͯ͑͞͞Ϳ͙͑Ͳ͸ʹ͚ Ϳ͑ͯ͑͞͞͵͙͑Ͳ͸ʹ͚ ͽͶͿ΄ ͺͿ͵΀΀΃ ΀Ά΅͵΀΀΃ Ͳ͸ʹ ΄ͶͿ΄Ͷ͞Ά΁ ͸ͲͺͿ ΃Ͷ΅Ά΃Ϳ ΃Ͷ΅Ά΃Ϳ Ͳ΃ͶͲ ΃Ͷ΅Ά΃Ϳ Έ͹ͺ΅Ͷ͑ͳͲͽ ͵ͲΊ͠Ϳͺ͸͹΅ ͳͽʹ ;΀͵Ͷ ΃Ͷ΅Ά΃Ϳ ͲΆ΅΀ ΃Ͷ΅Ά΃Ϳ ΃Ͷ΅Ά΃Ϳ ;ͲͿΆͲͽ ΃Ͷ΅Ά΃Ϳ ͳ͠Έ ;ͶͿΆ ͲΆ΅΀ͣͦͤͧͦ͑͢͢͢͢͝͠͝͠͡͝͠͡͝͠͡͝ͷͽͼͣ͑ͣͦ͑ͦ͑͑ͣ͑ͦ͑ͦ͢͢͢͢͢͢͢͢͢͢͢͝͠͡͠͡͝͠͡͡͝͠͡͡͡͝͠͡͡͡͝͠͡͡͡͝͠͡͡͡͡͝͠͡͡͡͡͝ Ωͣ͑͝Ωͥ͑͝Ωͧ͑͝Ωͩ͑͝Ω͑͢͡͝Ωͦ͑͢͝Ωͣ͑͡͝Ωͣͦ͑͝Ωͤ͑͡͝Ωͧ͡ ͵ͺ΄΁ͽͲΊ ͹΄ͳͽʹ ΀Ϳ ΄ͶͿ΄Ͷ͞Ά΁͙Ωͣ͑ί͑Ωͧ͑͡ͽΖΧΖΝ͑΄ΖΝΖΔΥΒΓΝΖ͚ ͵Ͷͷ΀͸ ͳͽʹ ͶΉ΅ ΃Ͷ΅Ά΃Ϳ ΄͹Ά΅΅Ͷ΃ ͶΉ΁΀΄Ά΃Ͷ Ϳ΅΄ʹ͑ͫ͑ͲΆ΅΀ͤͧ͑͢͢͝͠͡͝͠͡͝ͷͽͼ͑ͣͦ͑ͦ͑͑ͣ͑ͦ͑ͦ͑͢͢͢͢͢͢͢͢͢͝͠͡͝͠͡͡͝͠͡͡͡͝͠͡͡͡͝͠͡͡͡͝͠͡͡͡͡͝͠͡͡͡͡͝Ωͣ͑͝Ωͥ͑͝Ωͧ͑͝Ωͩ͑͝Ω͑͢͡͝Ωͦ͑͢͝Ωͣ͑͡͝Ωͤ͡ ͑ ΁Ͳͽ͑ͫ͑͑ͲΆ΅΀ͣͦͦ͑͢͢͝͠͝͠͡͝ͷͽͼ͑ͣͦ͑ͦ͑͑ͣ͑ͦ͑ͦ͑͢͢͢͢͢͢͢͢͢͝͠͡͝͠͡͡͝͠͡͡͡͝͠͡͡͡͝͠͡͡͡͝͠͡͡͡͡͝͠͡͡͡͡͝Ωͣ͑͝Ωͥ͑͝Ωͧ͑͝Ωͩ͑͝Ω͑͢͡͝Ωͦ͑͢͝Ωͣ͑͡͝Ωͤ͑͡͝ ͳͽΆͶ͙͑͑͡ί͑͢͡͡ͽΖΧΖΝ͑΄ΖΝΖΔΥΒΓΝΖ͚ ͶͿ͵ ΃Ͷ΅ ͲΆ΅΀ ͲʹʹͶ ͵ʹ ΃Ͷ΅Ά΃Ϳ ΃Ͷ΅ ͶͿ͵ ΀Ϳ͠΀ͷͷ ͑͡ίͧ͑͡ͽΖΧΖΝ͑΄ΖΝΖΔΥΒΓΝΖ ΃Ͷ΅͑ ͶͿ͵ ΃Ͷ΅ ͶͿ͵ ͑͡ί͑͑͢͡͡ͽΖΧΖΝ͑΄ΖΝΖΔΥΒΓΝΖ ΃Ͷ΅͑ ͶͿ͵ ΃Ͷ΅ ͶͿ͵ ΃Ͷ͵͙͑͑͡ί͑͢͡͡ͽΖΧΖΝ͑΄ΖΝΖΔΥΒΓΝΖ͚ Ͳ΃ͶͲ ͺ΃͑΄;Ͳ΃΅ ͹ͺ͸͹ ;ͺ͵͵ͽͶ ΀Ϳ͠΀ͷͷ Ϳͺ͸͹΅ Ͳͽͽ͑͵ͲΊ ͑͡ί͑͑͢͡͡ͽΖΧΖΝ͑΄ΖΝΖΔΥΒΓΝΖ ͶͿ͵ ΃Ͷ΅ ΀Ϳ ͽ΀Έ ΃Ͷ΅ ͶͿ͵ ͑͡ίͧ͑͡ͽΖΧΖΝ͑΄ΖΝΖΔΥΒΓΝΖ ͑͡ί͑͑͢͡͡ͽΖΧΖΝ͑΄ΖΝΖΔΥΒΓΝΖ ͑͡ί͑͑͢͡͡ͽΖΧΖΝ͑΄ΖΝΖΔΥΒΓΝΖ Ͳ͸ͲͺͿ ΄ͺ΋Ͷ ΁΀΄ͺ΅ͺ΀Ϳ

13 ͣ͵Ϳ΃ ΀Ϳ͠΀ͷͷ ΄͞ͽͶ·Ͷͽ Ͷ͞ͽͶ·Ͷͽ ͽͶ·Ͷͽ ͑͡ί͑͑͢͡͡ͽΖΧΖΝ͑΄ΖΝΖΔΥΒΓΝΖ ΄;Ͳ΃΅͑Ϳ΃ ΀Ϳ͠΀ͷͷ ΃Ͷ΅ ͶͿ͵ ΀Ϳ ͑ ΀ͷͷ ͷ΃ͶͶ΋Ͷ ΀Ϳ͠΀ͷͷ ;ͺ΃΃΀΃ ·͞ͷͽͺ΁ ΃΀΅Ͳ΅Ͷ ΀ͷͷ ΁ͺ΁ ΀Ϳ͠΀ͷͷ ͵͞΋΀΀; Ωͣ͑ί͑Ωͧͥ͑ͽΖΧΖΝ͑΄ΖΝΖΔΥΒΓΝΖ ΁ͲͿ͗΅ͺͽ΅ ΁ͺ΁͠͵͞΋΀΀; ͵ͶͷͲΆͽ΅ ΃Ͷ΅ ͶͿ͵ ͿͶ͸͑͟ͺ;Ͳ͸Ͷ Ͳ΃ͶͲ͑΄ͶͽͶʹ΅ ΁΀΄ͺ΅ͺ΀Ϳ ΄ͺ΋Ͷ ΃Ͷ΅͠Ͳ͸ͲͺͿ ΄ͶͿ΄ͺ΅ͺ·ͺ΅Ί ;΀΅ͺ΀Ϳ͑·ͺͶΈ ͵ͶͷͲΆͽ΅ ΀ͷͷ Ͳ΃ͶͲ͑΄ͶͽͶʹ΅ ͑Ͳ΃ͶͲ͑͢ί͑Ͳ΃ͶͲͩ ΁΀΄ͺ΅ͺ΀Ϳ ΄ͺ΋Ͷ ΃Ͷ΅͠Ͳ͸ͲͺͿ ʹ΀ͽ΀΃ ͵ͶͷͲΆͽ΅ ΀ͷͷ ͽͺ·Ͷ͑͵΁ʹ ͽͶ·Ͷͽ ΄΅Ͳ΅ͺʹ͑͵΁ʹ ΄΅Ͳ΃΅ ͽͶ·Ͷͽ ΄ͶͿ΄͞Ά΁ ΄͹Ͳ΃΁ͿͶ΄΄ ͽͶ·Ͷͽ ΃Ͷ΄΀ͽΆ΅ͺ΀Ϳ ͸Ͳ;;Ͳ ͲΆ΅΀͝Ά΄Ͷ΃͢͝Ά΄Ͷ΃ͣ͑ͥͦ͑͟͝͡ί͑͑͢͟͡͡ͽΖΧΖΝ͑΄ΖΝΖΔΥΒΓΝΖ ͳͽΆͶ͑͸ͲͺͿ͑ ΃Ͷ͵͑͸ͲͺͿ͑ ͳͽͲʹͼ͑ͽͶ·Ͷͽ ͳͽΆͶ͑͸ͲͺͿ͑ ΃Ͷ͵͑͸ͲͺͿ͑ ͑Ͳ΃ͶͲ͑͢ί͑Ͳ΃ͶͲͤ ͶͿ͵ ΃Ͷ΅ ΀Ϳ͠΀ͷͷ ΀Ϳ͠΀ͷͷ ͑͡ί͑ͧ͑͡ͽΖΧΖΝ͑΄ΖΝΖΔΥΒΓΝΖ Ͳ͸ͲͺͿ ΄ͺ΋Ͷ ΁΀΄ͺ΅ͺ΀Ϳ ΀ͷͷ ͑͢ί͑ͧ͑͢΄ΖΝΖΔΥΒΓΝΖ ΀ͷͷ ͶͿ͵ ΃Ͷ΅ ΀Ϳ͠΀ͷͷ ͑͡ί͑ͧ͑͡ͽΖΧΖΝ͑΄ΖΝΖΔΥΒΓΝΖ ͲΆ΅΀͠΀Ϳ͠΀ͷͷ ͶͿ͵ ͶͿ͵ ΃Ͷ΅ Ωͣ͑ί͑Ωͧ͑͡ͽΖΧΖΝ͑΄ΖΝΖΔΥΒΓΝΖ ͑͡ί͑ͧ͑͡ͽΖΧΖΝ͑΄ΖΝΖΔΥΒΓΝΖ ΀Ϳ͠΀ͷͷ ͑͡ί͑͑͢͡͡ͽΖΧΖΝ͑΄ΖΝΖΔΥΒΓΝΖ ΃Ͷ΅ ͶͿ͵ ΃Ͷ΅ ͶͿ͵ ΃Ͷ΅Ά΃Ϳ ͤ͑͞͡ί͑ͤ͑͡ͽΖΧΖΝ͑΄ΖΝΖΔΥΒΓΝΖ ͑͡ί͑͑͢͡͡ͽΖΧΖΝ͑΄ΖΝΖΔΥΒΓΝΖ ͶͿ͵ ΃Ͷ΅ ΀Ϳ͠΀ͷͷ ΃Ͷ΅ ΃Ͷ΅ ͶͿ͵ ͤ͵Ϳ΃ ΃Ͷ΅Ά΃Ϳ ΀Ϳ ΃Ͷ΅Ά΃Ϳ ΀ͷͷ ;΀Ϳͺ΅΀΃ ͑͡ί͑͢͡͡ͽΖΧΖΝ͑΄ΖΝΖΔΥΒΓΝΖ ͽʹ͵ ʹ΃΅ ΃Ͷ΅Ά΃Ϳ ΃Ͷ΅Ά΃Ϳ ΀Ϳ ΃Ͷ΅Ά΃Ϳ ͵ͺ΄΁ͽͲΊ ΀Ϳ ͵ͶͷͶʹ΅ ΄΁ͶʹͺͲͽ Ͳ͵ͻΆ΄΅ ͑͡ί͑͑͢͡͡ͽΖΧΖΝ͑΄ΖΝΖΔΥΒΓΝΖ ͑͡ί͑͑͢͡͡ͽΖΧΖΝ͑΄ΖΝΖΔΥΒΓΝΖ ;΀΅ͺ΀Ϳ ΁΃ͺ·ͲʹΊ ΃Ͷ΅Ά΃Ϳ ΄͹Ͳ΃΁ͿͶ΄΄ ΃Ͷ΅Ά΃Ϳ ʹͲ;͑΅ͺ΅ͽͶ ΃Ͷ΅Ά΃Ϳ ΃Ͷ΅Ά΃Ϳ ΃Ͷ΅Ά΃Ϳ ΃Ͷ΅Ά΃Ϳ ;ͺ΃΃΀΃ Ͳ΃ͶͲ͑͵ͺ΄΁ͽͲΊ ͵͞΋΀΀; ΀Ϳ Ͳ΃ͶͲ͑͵ͺ΄΁ͽͲΊ ΀Ϳ ΀Ϳ ΃Ͷ΅ ͑͡ί͑͑͢͡͡ͽΖΧΖΝ͑΄ΖΝΖΔΥΒΓΝΖ ͑͡ί͑͑͢͡͡ͽΖΧΖΝ͑΄ΖΝΖΔΥΒΓΝΖ ͵͞ͶͷͷͶʹ΅ Ϳ΃ ͶͿ͵

14 ΅ͶΉ΅͑ʹ΀ͽ΀΃ ΀Ά΅ͽͺͿͶ ͽ΄ʹ ΃Ͷ΄΀ͽΆ΅ͺ΀Ϳ ͷͲʹ΅΀΃Ί ͶΉͺ΅ ΃Ͷ΄Ͷ΅ ΃Ͷ΅ ͶͿ͵ ΃Ͷ΅Ά΃Ϳ Ϳ΅΄ʹ͑͑͠΁Ͳͽ ΀Ϳ͠΀ͷͷ Ϳ΅΄ʹ ΁Ͳͽ ΃Ͷ΅ ͶͿ͵ ΃Ͷ΅ ΀Ϳ͠΀ͷͷ ͑͢ί͑ͩ͑ͽΖΧΖΝ͑΄ΖΝΖΔΥΒΓΝΖ ͨͣ͡΁͑͑ͩ͢͠͡͡΁ ΃Ͷ΄Ͷ΅ ΃Ͷ΅Ά΃Ϳ ΀΄͵ Ͳ͵ͻΆ΄΅ ΃Ͷ΅Ά΃Ϳ ͶͿ͵

1. Press the Set Up button. * The Set Up menu will be displayed on the monitor. 2. Move and select the required function using the Up and Down button. * Move the arrow indicator Up or Down to select the desired feature by pressing the Up or Down button. Menu Set Up SETUP 1.LENS 2.EXPOSURE 3.WHITE BAL 4.DAY / NIGHT 5.NR 6.SPECIAL 7.ADJUST 8.RESET 9.EXIT DC ATW COLOR SETUP 1.LENS 2.EXPOSURE 3.WHITE BAL 4.DAY / NIGHT 5.NR 6.SPECIAL 7.ADJUST 8.RESET 9.EXIT DC ATW COLOR

* Available values or Status are displayed by pressing the Left or Right buttons. Press the button until desired value / status is displayed. 4. After Changing the setting, move the arrow indicator to EXIT and press the SET button to EXIT. 1. Move the arrow indicator to LENS using the Up and Down buttons on the Set Up menu screen. 2. Select the desired lens type by pressing the Left or Right button. NOTE * Move to the available submenu by moving arrow to desired feature. * Submenu is not available when this symbol is displayed Lens DC: DC Auto Iris Lens SETUP 1.LENS 2.EXPOSURE 3.WHITE BAL 4.DAY / NIGHT 5.NR 6.SPECIAL 7.ADJUST 8.RESET 9.EXIT DC ATW COLOR 3. Press the RETURN to return to the SETUP menu.

1. On the Set Up menu screen select EXPOSURE by using the Up or Down button. 2. Select the desired shutter mode by pressing the Left or Right button. * FLK : Select FLK mode when flickering occurs; caused by the unmatched frequency of electric lights. Exposure SETUP 1.LENS 2.EXPOSURE 3.WHITE BAL 4.DAY / NIGHT 5.NR 6.SPECIAL 7.ADJUST 8.RESET 9.EXIT DC ATW COLOR EXPOSURE SHUTTER AGC SENS-UP BRIGHTNESS ACCE DEFOG BLACKLIGHT RETURN AUTO HIGH AUTO OFF OFF OFF RET NOTE *Shutter: Select Shutter using the Up or Down button, you can adjust the shutter speed from AUTO,1/30,1/60, FLK, 1/250, 1/500, 1/1000, 1/2000, 1/5000, 1/10000,1/50000, x2, x4, x6, x8, x10, x15, x20, x30, x60 →FLK: Select FLK mode if flickering occurs; caused by the unmatched frequency of electric light. If select FLK mode, sense-up does not operate. *Low Shutter Control: sensitivity boost up by frame accumulation for extremely low illumination conditionspeed 100

A higher gain increases brightness but also increases any noise. OFF : Deactivate the AGC function LOW : Set automatic gain control to LOW. MIDDLE : Set utomatic gain control to MIDDLE. HIGH : Set automatic gain control to HIGH * SENS - UP: At night and/or in dark conditions, the Sens-Up mode can be selected to desired value from x2 ~ x60 * When DC is selected, the brightness can be adjusted. The brightness control range is 1 ~ 100. LENS BRIGHTNESS 100

NOTE * Pressing the SET button in AUTO mode allows adjustment of image brightness by increasing or decreasing the shutter speed (x2 ~x60). * The higher the level, the brighter the image becomes, but it is possible that an after image (ghosting) could appear. * When SENS-UP is activated the increased magnification can induce noise and pixelation; this is quite normal. * HSBLC: HSBLC function is especially effective for reading car number plates at the night time. You can select and define the required observation area for the target object and ignore a strong light area. Press the "ENTER" button at the AREA menu, you can change the position as shown in Picture 1. Press the "ENTER" button again after area setting, you can change the position as shown in Picture 2. Default: Press the Default to return to factory defaults. PICTURE 1 PICTURE 2 POSITION SIZE HSBLC SELECT DISPLAY LEVEL MODE BLACK AEFAOLT RETURN AREA1 ON 100 ALL DAY MASK ON

→OFF: ACCE function does not operate. WDR compensates for bright and dark areas in the same scene. * RETURN: Select Return to save the changes in the EXPOSURE menu and return to the SETUP menu. * DEFOG: Adapt visibility enhancement on the low contrast scene. HSBLC OFF ACCE OFF HSBLC ON ACCE ON

* BLC: Select LOW/MID/HIGH User can select and define a specific area in scene and view the area clearly. Press the Enter button to adjust the position of the area selected as shown in picture 1. Press the Enter button again to adjust the area size as shown in picture 2. Default: Press the Default to return to factory defaults. BLC GAIN AREA DEFAULT RETURN MIDDLE RET PICTURE 1 PICTURE 2 POSITION SIZE * BLC(Back Light): This camera witch is using 3D-DNR DSP provides intelligent light level control to overcome even strong backlight conditions.

1. Move the arrow indicator to WHITE BAL on the SETUP menu screen using the Up and Down button. 2. Select the desired mode by using the Left or Right button. * There are three user selectable White Balance settings available. * ATW : (Auto Tracking White Balance) Normal setting; when the color temperature range is from 1,800˚K to 10,500˚K. (Ex: a fluorescent lamp or outdoors) * AWC → SET : To obtain the best results, press the SET button while the camera is focusing onto white paper. If the environment and/or light source changes, the White Balance will require re-adjustment. * MANUAL : Use for fine adjustment of White Balance. Set White Balance first using ATW or AWC then change to MANUAL and press SETUP button. Increase or decrease the value of R-Gain(Red) and B-Gain(Blue) while monitoring the color of the image. MANUAL WB BLUE RED RETURN 50 50 RET SETUP 1.LENS 2.EXPOSURE 3.WHITE BAL 4.DAY / NIGHT 5.NR 6.SPECIAL 7.ADJUST 8.RESET 9.EXIT DC ATW COLOR

Picture can be displayed in either color of black and white. 1. Select DAY / NIGHT using the Up or Down button on the SETUP menu screen. 2. Select the desired mode using the Left and Right buttons. * COLOR : The picture is always displayed in color. * BW : This picture is always displayed in black and white. Select BW using the button and press the menu to activate COLOR BURST option. IR SMART : It controls the IR LED(bright portion base), satuation is not expected. B/W DAY NIGHT BURST IR SMART IR LED IR PWM RETURN OFF ON OFF 100 RET SETUP 1.LENS 2.EXPOSURE 3.WHITE BAL 4.DAY / NIGHT 5.NR 6.SPECIAL 7.ADJUST 8.RESET 9.EXIT DC ATW COLOR

SMART IR OFF SIZE IR SMART GAIN AREA RETURN 15 RET → AUTO: The mode will automatically switch to COLOR in normal condition and switch to BW mode when ambient illumination is low. Press the SET button to set the switching time or D→N(AGC), N→D(AGC) in AUTO mode. DAY & NIGHT AUTO DELAY D→N(AGC) N→D(AGC) RETURN 60 100 100 RET

1. Move the arrow indicator to NR by using the Up and Down button. 2. Select whether or not to activate 2DNR by using the Left and Right buttons. : based on noise variance from AGC value : 2D-edge preserving & flat area noise reduction 3. Select whether or not to activate 3DNR by using the Left and Right buttons. : motion adaptive temporal IR filtering : edge preserving & ghost elimination : adaptive weight control by noise level * Select RETURN by using the Up or Down button to return to Set Up menu. NR 2D & 3D NR 2DNR 3DNR LEVEL SMART IR RETURN OFF ON 80 OFF RET SETUP 1.LENS 2.EXPOSURE 3.WHITE BAL 4.DAY / NIGHT 5.NR 6.SPECIAL 7.ADJUST 8.RESET 9.EXIT DC ATW AUTO

Select one of the mode using the Up and Down button. 1. CAM TITLE : When input, the Camera ID is displayed on the monitor. 1-1) Move the arrow indicator to CAMERA ID using the Up or Down button on the SETUP menu screen. 1-2) Set to ON using the Left or Right button. SPECIAL 1. CAM TITLE 2. D - EFFECT 3. MOTION 4. PRIVACY 5. DEFECT 6. RETURN OFF OFF OFF RET SETUP 1.LENS 2.EXPOSURE 3.WHITE BAL 4.DAY / NIGHT 5.NR 6.SPECIAL 7.ADJUST 8.RESET 9.EXIT DC ATW AUTO

CAM TITLE CAM TITLE 0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z ▷ → ← ↑ ↓ ( ) - ㅡ_ □ / = & : ~ , . ← → C L R P O S E N D 0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z ▷ → ← ↑ ↓ ( ) - ㅡ_ □ / = & : ~ , . ← → C L R P O S E N D NOTE * When CAMERA TITLE is set to OFF, the CAMERA TITLE is not displayed on the monitor. 1-4) The CAMERA TITLE can be up to 15 alphanumeric characters in length. ① Move the cursor to choose an alphanumeric character. ② Choose a character in displayed range A~Z, a~z, 0~9 using the Up, Down, Left and Right buttons. ③ Select the desired character by pressing the SETUP button. - The cursor moves to the next position, after character input, by pressing the SETUP button. ④ Repeat the above steps until the Camera ID has been created.

Move the cursor to CLR and press SETUP button to erase characters from left to right, and repeat the above steps to input the characters again. 1-5) How to select the position where the Camera ID should be displayed on the screen. ① Move the cursor to POS and press the SET button. CAM TITLE 0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z ▷ → ← ↑ ↓ ( ) - ㅡ_ □ / = & : ~ , . ← → C L R P O S E N D ② Created camera ID is displayed. (Factory default position) CAM1

directional button, Press the SET button to confirm the position. CAM1 2. D - EFFECT Move the cursor to D-EFFECT and press the SET button to set the other image functions. D-EFFECT D-EFFECT FREEZE MIRROR D-ZOOM NEG.IMAGE RETURN FREEZE MIRROR D-ZOOM NEG.IMAGE RETURN OFF OFF OFF OFF RET OFF OFF OFF OFF RET 2 -1) MIRROR : Flip the image horizontally on the screen.

PAN : The pan range can be controlled between -10 ~ + 100 TILT : The tilt range can be controlled between -10 ~ + 100 * V-FLIP : Flip the image vertically on the screen. * ROTATE : Flip the image vertically and horizontally on the screen. * OFF : Disabled. MIRROR ON MIRROR OFF NOTE * Pan and tilt functions are available when digital zoom function is activated. D-ZOOM PIP D-ZOOM PAN & TILT DEFAULT RETURN ON x2

ON : Activate negative image just like film OFF : Normal image 2-4) RETURN : Move the arrow indicator to RETURN after complete the setup to return to SPECIAL menu. 3. MOTION 3-1) When the special menu screen is displayed, use the Up or Down botton to access the MOTION menu. AREA SELECT : You can select from area 1~3 position. AREA DISPLAY) ON: Display the Motion Detected area on the screen. You can set the location and size like picture 1,2. SENSITIVITY: To setup the motion sensitivity, you can adjust the motion sensitivity of a movement between level 0~40. MOTION VIEW : If camera detects movement, the word "MOTION DETECTION" will appear on the monitor. RETURN : Return to the SPECIAL menu after completing the setup. MOTION SELECT DISPLAY SENSITIVITY MOTION VIEW DEFAULT RETURN AREA1 ON OFF RET 40 POSITION SIZE

4-1). When the SPECIAL menu screen is displayed, press the Up and Down buttons to set to PRIVACY. 4-2). Set up the area mode using the 4 direction buttons. ① AREA SELECT : You can select up to 8 MD area. ② AREA DISPLAY : OFF : Disabled ON : Activate area display PRIVACY SELECT DISPLAY COLOR DEFAULT RETURN AREA1 ON RET 15 POSITION SIZE

④ Adjust the height of the area by using the left/right button. ⑤ Move the arrow indicator to the LEFT / RIGHT and TOP / BOTTOM to select the desired area positon by using the LEFT or RIGHT button. ⑥ Move the arrow indicator to COLOR to select the desired color of each area cells by using the Left / Right button to select between the 15 different colors. RETURN : Move the arrow indicator to RETURN after completing the setup to return to SPECIAL menu. 5. DEFECT SENSE-UP : To eliminate defect, set the high level of sense-up. You can set to max 60x, but 10x is best to eliminate defect. DIFF : You can set the size of DEFECT from 1 to 6. START : After pressing the "ENTER" button, it will start to eliminate defects and "PROCESSING NOW..." will be displayed on the monitor. DEFECT LIVE DPC LEVEL STATIC DPC START LEVEL SENS-UP RETURN AUTO - - - ON 60 x8 RET

SETUP 1.LENS 2.EXPOSURE 3.WHITE BAL 4.DAY / NIGHT 5.NR 6.SPECIAL 7.ADJUST 8.RESET 9.EXIT DC ATW AUTO 2. Select the desired mode by using Up or Down button. SHARPNESS : Improve clarity in image. The level can be adjusted to obtain an improved image. However, when the level is set too high, it can distort the image or cause noise. You can adjust from level 1 to 100, and can set to monitor function as LCD, and CRT. ADJUST SHARPNESS SHARPNESS MONITOR OSD LSC NTSC/PAL RESOLUTION RETURN SHARPNESS LEVEL RESOLUTION RETURN LCD NTSC 1080P RET ON 50 OFF RET MONITOR MONITOR LCD CRT GAMMA BLUE GAIN RED GAIN RETURN BLACK LEVEL BLUE GAIN RED GAIN RETURN 0.50 RET RET 50 50 30 50 50

Exit Press the SET button in the EXIT menu to save the current settings and exit the SETUP menu. SETUP 1.LENS 2.EXPOSURE 3.WHITE BAL 4.DAY / NIGHT 5.NR 6.SPECIAL 7.ADJUST 8.RESET 9.EXIT DC ATW AUTO RESET FACTORY RETURN RESET RET SETUP 1.LENS 2.EXPOSURE 3.WHITE BAL 4.DAY / NIGHT 5.NR 6.SPECIAL 7.ADJUST 8.RESET 9.EXIT DC ATW AUTO LSC(Lens Shading Compensation) : Improve shading of the Lens. LSC OFF LSC ON

PROBLEM Northing appears on the screen. FCheck the power cable, power supply output and video connection between the camera and monitor. FAre the camera lens or the lens glass dirty? Clean the lens / glass with a soft clean cloth. FAdjust the monitor controls, as required. FIf the camera is facing a very strong light, change the camera position. FAdjust the lens focus. FAdjust the contrast control of the monitor. FIf there is an intermediate device, correctly set the 75Ω/Hi-z. FHas MOTION DET been set to ON in the menu? FHas MD AREA been properly defined? FCheck that the AGC setting in the EXPOSURE menu is’t set to OFF. FCheck the EXPOSURE menu and make sure SHUTTER is set to------. FMake sure that the camera isn’t facing direct sunlight or fluorescent lighting. If necessary,change the camera position. FCheck the settings in WHITE BALANCE menu. FCheck the camera is correctly connected to an appropriate regulated power source. The image on the screen is dim. The camera is not working properly and the surface of the camera is hot. The image on the screen is dark. Motion Detection is not activated. The color of the picture is not correct. The image on the screen flickers. The INTENSIFY does not work. POSSIBLE CAUSE