Philips SHB9100WT Quick Start Manual

Philips Bluetooth stereo headset SHB9100WT Pair the headset with your mobile phone 1 Make sure that your mobile phone is turned on and its Bluetooth feature is activated. 2 Make sure that the headset is charged and turned off. 3 Press and hold until the LED starts flashing white and blue alternately. » » The headset is in pairing mode, which lasts five minutes. 4 Pair the headset with your mobile phone. For details, refer to the user manual of the mobile phone. Enter “0000” (4 zeros), if prompted to enter the pin code of the headset. EN Please refer to www.philips.com/welcome for full user manual. Settings Select Back Connectivity 10:37 Enter Password **** 0000 Settings Bluetooth Select Back Connectivity 10:35 Add Bluetooth device Settings Devices Found Select Back 10:36 Philips SHB6000 Settings Select Back Connectivity 10:37 Enter Password **** 0000 Settings Bluetooth Select Back Connectivity 10:35 Add Bluetooth device Settings Devices Found Select Back 10:36 Philips SHB9100WT

Press and hold for more than 4 seconds Turn the headset off. Press and hold for more than 4 seconds Play or pause music. Press Pick up or terminate a call. Press Reject a call. Press and hold Redial the last number. Press twice Switch caller in a call. Press twice Transfer a call to your mobile phone. (This function is available if your mobile phone supports this feature.) Press and hold for more than 4 seconds Adjust volume. Slide up / down VOL +/- Skip forward. Press Skip backward. Press twice Mute/unmute the microphone in a call. Press Activate voice dialing Press twice Use your headset *Available if supported by your mobile phone. The headset is connected to a Bluetooth device, while the headset is in standby mode or while you are listening to music. Blue LED flashes every 8 seconds. The headset is ready for pairing. LED flashes whiteand blue alternately. The headset is on but not connected to a Bluetooth device. Blue LED flashes fast. There is an incoming call. Blue LED flashes twice per second. Low battery. White LED flashes. Battery is fully charged. White LED flashes. The LED is off. The headset is off./Charging is finished. The headset beeps every 5 seconds The Mic is muted. Other status and indicators © 2012 Koninklijke Philips Electronics N.V. All rights reserved. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. V2.0 Welcome to Philips! For an optimal experience, register your product at www.philips.com/welcome