Philips HTS3000/98 Quick Start Manual

Quick Start Guide Connect Set up Enjoy 1 2 3 What’s in the box? Start disc playback A Press OPEN/CLOSE ç to open the disc tray. B Place a disc with the disc label facing up. C Press OPEN/CLOSE ç to close the disc tray. D Playback starts automatically. E If the disc menu appears on the TV, use W XST keys or numeric keypad to select an option in the menu and press OK to start playback. z To enjoy the powerful surround sound from the speakers, press SURROUND on the remote control to turn on the multi-channel surround mode. F Press „ to stop playback. Note When you press u button, playback resumes from where it last stopped. To start playback from the beginning, you have to press . Listen to radio A Press RADIO. The display panel shows ‘AUTO INSTALL PRESS PLAY’. B Press u. All the available radio stations with strong reception signal will be stored automatically. C Once complete, use í / ë keys to select a preset radio station. Troubleshooting For more troubleshooting tips, see the user manual. No picture. • Press DISC on the remote control. • Check the connection to the TV and ensure the plugs are fi rmly in place. No sound. • Check the speaker connections and settings. • Check the audio connections and press SOURCE to select the correct input source. • Press SURROUND to turn on the multi-channel surround output. The main unit does not work. • Disconnect the power cord from the power outlet for a few minutes. Reconnect the power cord and try again. HTS3000 Main Unit Remote Control and 2 batteries User Manual 1 centre, 2 front, 2 rear speakers and subwoofer FM wire antenna AM/MW loop antenna Need help? User Manual See the user manual that came with your Philips DVD Home Theatre System. Online Go to www.philips.com/welcome 2007 C Koninklijke Philips N.V. All rights reserved. www.philips.com Composite video cable Power cable

ensure optimum sound performance. FRONT RIGHT FRONT LEFT CENTER REAR RIGHT REAR LEFT SUBWOOFER A Place the centre speaker above or close to the TV. B Place the subwoofer on the floor, at least one metre away from the TV. C Place the front speakers at equal distances from the TV. D Place the rear speakers at normal listening ear level. B Connect the main unit to TV SPEAKERS AM/ MW VIDEO OUT Pr Y VIDEO IN (CVBS) VIDEO IN (CVBS) z Connect a composite video cable (supplied) from the CVBS socket on the main unit to the VIDEO IN socket on your TV. Note It is important to connect the main unit directly to your TV. 2 Set up C Connect the speakers and subwoofer Connect the various coloured plugs from the speakers and subwoofer to the same coloured sockets at the rear of the main unit. SPEAKERS AM/ MW Main Unit (rear) A Finding the viewing channel A Press 2 (STANDBY ON) on the main unit to turn it on. B Turn on the TV. Use the TVs remote control to select the correct viewing channel. STANDBY-ON Note To search for the correct viewing channel, press the Channel Down button on the TVs remote control repeatedly (or AV, SELECT, ° button) until you see the Video In channel. B Select the display language on the screen A Press SETUP. The { General Setup Page } appears. General Setup Page Disc Lock Display Dim Program OSD Language Screen Saver Sleep DivX(R) VOD Code English Melayu Русский B Press T to select { OSD Language } and press X. C Use TS keys to select a language option in the menu and press OK to confirm. D Press SETUP to exit. Note The language set here is only for the menus that are shown on the TV while operating this Home Theatre system, not for the DVD disc menu. There are various setup options (Audio Setup, Video Setup, Preference Setup) available on this Home Theatre System. Refer to the user manual for more information. D Connect the radio antennas Keep the antennas away from the electronic devices to prevent unwanted interference. SPEAKERS AM/ MW A C B A Connect the FM antenna to the inner pin of the FM 75  socket. For optimum reception, extend the wire and fix its end to the wall. B Unfold the AM/MW loop antenna and fix the claw into the slot. Push the tabs and insert the wires into the AM/MW sockets. C Connect in the power cable from the main unit to the AC power outlet. E Connect audio output from TV (optional) To hear the TV audio through this home theatre system, use a red and white audio cables (not supplied) to connect the AUDIO IN-TV sockets on the main unit to the AUDIO OUT sockets on your TV. SPEAKERS AM/ MW AUDIO OUT AUDIO IN AUDIO OUT AUDIO OUT Note When watching the TV programmes, you can press TV on the remote control to get the sound output from the speakers. Main Unit (rear) Television (rear) Main Unit (rear) Main Unit (rear) FM antenna AM/MW antenna SUBWOOFER FRONT RIGHT FRONT LEFT REAR RIGHT REAR LEFT FRONT CENTRE SETUP Television (rear)