Philips HTS3264D/37 Quick Start Manual

A Press ç to open the disc tray. B Place a disc with the disc label facing up. C Press ç to close the disc tray. D Playback starts automatically. E If the disc menu appears on the TV, use W XST keys or the numeric keypad to select an option in the menu and press OK to start playback. z To enjoy the powerful surround sound from the speakers, press SURROUND on the remote control to turn on the multi-channel surround mode. F Press „ to stop playback. Note When you press u button, playback resumes from where it last stopped. To start playback from the beginning, you have to press . Playback other supported devices DOCK Apple iPod A Connect the docking station to the DOCK jack. B Dock your ipod in the docking station and adjust the support to fit it. Then turn on the ipod. C Press DOCK to switch to ‘DOCK’ mode. D Press PLAY on your iPod. MP3 LINK MP3 LINK USB device A Connect your USB device to the (USB) jack. B Press USB to switch to ‘USB’ mode. C Press u to start playback. D To stop playback, press DISC to switch to ‘DISC’ mode. You can unplug your USB device now. Other portable audio player A Use a 3.5mm stereo audio cable (not supplied) to connect the headphone output jack on your portable audio player to MP3 LINK jack. B Press PLAY on your portable audio player. C Press AUX (MP3 LINK) repeatedly until ‘MP3 LINK’ is displayed to listen to the playback. Need help? User Manual See the user manual that came with your Philips DVD Home Theatre System. Register your product and get support at www.philips.com/welcome Quick Start Guide Connect Set up Enjoy 1 2 3 HTS3264D 2008 C Philips Consumer Electronics A Division of Philips Electronics North America Corp P.O. Box 671539 Marietta, GA 30006 0026 All rights reserved. Printed in China What’s in the box? Main Unit Remote Control and 2 batteries User Manual 1 center, 2 front, 2 rear speakers and subwoofer FM wire antenna Docking station Composite video cable hts3264D_37_qsg_eng2_final811.in1 1 hts3264D_37_qsg_eng2_final811.in1 1 2008-03-13 11:19:19 AM 2008-03-13 11:19:19 AM

ensure optimum sound performance. FRONT RIGHT SUBWOOFER FRONT LEFT CENTER REAR RIGHT REAR LEFT A Place the centre speaker above or close to the TV. B Place the subwoofer on the floor, at least one metre away from the TV. C Place the front speakers at equal distances from the TV. D Place the rear speakers at the back or beside the listening position. B Connect the main unit to TV VIDEO IN (CVBS) VIDEO IN (CVBS) z Use the supplied composite video cable to connect the CVBS jack on the main unit to the VIDEO IN jack on your TV. Note It is important to connect the main unit directly to your TV. 2 Set up C Connect the speakers and subwoofer Connect the various colored plugs from the speakers and subwoofer to the same colored jacks at the rear of the main unit. A Finding the viewing channel A Press 2 (Standby-On) on the main unit to turn it on. B Turn on the TV. Use the TVs remote control to select the correct viewing channel. Note To search for the correct viewing channel, press the Channel Down button on the TVs remote control repeatedly (or AV, SELECT, ° button) until you see the Video In channel. If you are using a RF modulator, set the TV to channel 3 or 4. B Select the display language on the screen A Press OPTIONS. The { General Setup } appears. B Press X. Press OPTIONS to exit menu General Setup Disc Lock Display Dim OSD Language Screen Saver DivX(R) VOD Code Sleep Français Español English C Use TS keys to select { OSD Language } and press X. D Use TS keys to select a language option in the menu and press OK to confirm. E Press OPTIONS to exit. Note The language set here is only for the menus that are shown on the TV while operating this Home Theatre system, not for the DVD disc menu. There are various setup options (Audio Setup, Video Setup, Preferences) available on this Home Theatre System. Refer to the user manual for more information. D Connect the radio antenna and power cable Keep the antennas away from the electronic devices to prevent unwanted interference. B A A Connect the FM antenna (supplied) to the inner pin of the FM 75  jack. (For some models, it has been connected in the factory.) Extend the wire for optimum reception. B Connect the power cable from the main unit to the AC power outlet. E Connect audio output from TV (optional) To hear the TV audio through this unit, use a red and white audio cables (not supplied) to connect the AUDIO IN-AUX jacks on the main unit to the AUDIO OUT jacks on your TV. AUDIO OUT AUDIO IN AUDIO OUT AUDIO OUT Note When watching the TV programs, you can press AUX (MP3 LINK) repeatedly on the remote control until ‘AUX 1’ or “AUX 2’ is displayed to get the sound output from the speakers. Main Unit (rear) Television (rear) Main Unit (rear) Main Unit (rear) FM antenna SUBWOOFER FRONT RIGHT FRONT LEFT REAR RIGHT REAR LEFT FRONT CENTER Main Unit (rear) Main Unit (Front) Standby button TV (rear) hts3264D_37_qsg_eng2_final811.in2 2 hts3264D_37_qsg_eng2_final811.in2 2 2008-03-13 11:19:22 AM 2008-03-13 11:19:22 AM