Philips HTS9540/12 Operation & User’s Manual

www.philips.com/welcome EN User manual DA Brugervejledning DE Benutzerhandbuch EL Εγχειρίδιο χρήσης ES Manual del usuario FI Käyttöopas FR Mode d’emploi IT Manuale utente NL Gebruiksaanwijzing NO Brukerhåndbok PT Manual do utilizador SV Användarhandbok TR Kullanım kılavuzu

20 Access the setup menu 20 Change video settings 20 Change audio settings 21 Set up surround sound automatically 21 Set up surround sound manually 22 Set up network 22 Set up EasyLink 22 Multiview 23 Change preference settings 23 Change advanced settings 23 6 Update software 24 Check software version 24 Update software from the network 24 Update software from a USB 24 Update electronic user manual 25 7 Product specifications 25 8 Troubleshooting 27 Main unit 27 Picture 27 Sound 27 Play 27 Network 28 9 Index 29 Contents 1 Important 2 Safety 2 Product care 2 Disposal of your old product and batteries 3 3D health warning 3 2 Your home theater 4 Main unit 4 Remote control 4 3 Connect your home theater 7 Connectors 7 Connect to the TV 8 Connect audio from TV or other devices 9 Connect to a computer network and the Internet 10 Connect a wireless module 11 4 Use your home theater 11 Before you start 11 Access the home menu 11 Choose your sound 12 Play a disc 13 Use Bonus View on Blu-ray 13 Access BD-Live on Blu-ray 14 Play 3D video 14 Play from a USB storage device 14 More play features for disc or USB 15 Play from PC (DLNA) 16 Browse Net TV 17 Access online video stores 17 Play from radio 18 Play audio from TV or other devices 19 Play from an MP3 player 19 Play from an iPod or iPhone 19 Use Philips EasyLink 19 English EN

supplied stands. Secure the stands to the speakers tightly. Place the assembled stands on flat, level surfaces that can support the combined weight of the speaker and stand. • Never place the product or any objects on power cords or on other electrical equipment. • If the product is transported in temperatures below 5°C, unpack the product and wait until its temperature matches room temperature before connecting it to the power outlet. • Visible and invisible laser radiation when open. Avoid exposure to beam. • Do not touch the disc optical lens inside the disc compartment. Risk of overheating! • Never install this product in a confined space. Always leave a space of at least four inches around the product for ventilation. Ensure curtains or other objects never cover the ventilation slots on the product. Risk of contamination! • Do not mix batteries (old and new or carbon and alkaline, etc.). • Remove batteries if they are exhausted or if the remote control is not to be used for a long time. • Batteries contain chemical substances, they should be disposed of properly. Product care • Do not insert any objects other than discs into the disc compartment. • Do not insert warped or cracked discs into the disc compartment. • Remove discs from the disc compartment if you are not using the product for an extended period of time. • Only use microfiber cloth to clean the product. 1 Important Read and understand all instructions before you use your home theater. If damage is caused by failure to follow instructions, the warranty does not apply. Safety Risk of electric shock or fire! • Never expose the product and accessories to rain or water. Never place liquid containers, such as vases, near the product. If liquids are spilt on or into the product, disconnect it from the power outlet immediately. Contact Philips Consumer Care to have the product checked before use. • Never place the product and accessories near naked flames or other heat sources, including direct sunlight. • Never insert objects into the ventilation slots or other openings on the product. • Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. • Disconnect the product from the power outlet before lightning storms. • When you disconnect the power cord, always pull the plug, never the cable. Risk of short circuit or fire! • Before you connect the product to the power outlet, ensure that the power voltage matches the value printed on the back or bottom of the product. Never connect the product to the power outlet if the voltage is different. Risk of injury or damage to the home theater! • For wall-mountable products, use only the supplied wall mount bracket. Secure the wall mount to a wall that can support the combined weight of the product and the wall mount. Koninklijke Philips Electronics N.V. bears no responsibility for improper wall mounting that results in accident, injury or damage. EN

If you or your family has a history of epilepsy or photosensitive seizures, consult a medical professional before exposing yourself to flashing light sources, rapid image sequences or 3D viewing. To avoid discomfort such as dizziness, headache or disorientation, we recommend not watching 3D for extended periods of time. If you experience any discomfort, stop watching 3D and do not immediately engage in any potentially hazardous activity (for example driving a car) until your symptoms have disappeared. If symptoms persist, do not resume watching 3D without consulting a medical professional first. Parents should monitor their children during 3D viewing and ensure they do not experience any discomfort as mentioned above. Watching 3D is not recommended for children under six years of age as their visual system is not fully developed yet. Disposal of your old product and batteries Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/ EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health. Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed with normal household waste. Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health. English EN

following remote controls. Remote control - A 2 5 6 7 10 11 12 1 3 4 8 14 13 9 17 18 19 15 16 2 Your home theater Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your home theater at www.philips.com/welcome. Main unit a +/- (Volume) Increases or decreases volume. b SOURCE Selects an audio/video source for the home theater. c (Standby-On) Switches on the home theater or switches to standby mode. d (Play/Pause) Starts, pauses or resumes play. e (Stop) Stops play. f (Open/Close) Opens or closes the disc compartment. g Display panel h Disc compartment EN

• Stops play. • Press and hold to eject the disc or open the disc compartment. • In radio mode, erases the current preset radio station. p (Mute) Mutes or restores volume. q BACK Returns to a previous menu screen. r POP-UP MENU/DISC MENU Accesses or exits the disc menu. s Source buttons • Color buttons (for Blu-ray discs): Selects tasks or OPTIONS. • DISC: Switches to disc source. • RADIO: Switches to FM radio. • DOCK for iPod: Switches to Philips Dock for iPod/iPhone. • SOURCE: Selects an audio input source. a (Standby-On) • Switches the home theater on or to standby. • When EasyLink is enabled, press and hold for at least three seconds to switch all connected HDMI CEC compliant devices to standby. b (Home) Accesses the home menu. c SOUND SETTINGS Accesses or exits various sound OPTIONS. d Navigation buttons • Navigates menus. • In radio mode, press left or right to start auto search. e OK • Confirms an entry or selection. f OPTIONS • Accesses more play OPTIONS during playback. • In radio mode, programs radio stations. g +/- (Volume) Increases or decreases volume. h (Play) Starts or resumes play. i (Pause) Pauses play. j / (Fast Backward/Fast Forward) Fast backwards or fast forwards. Press repeatedly to change the search speed. k Alphanumeric buttons Enters values or letters (using SMS style entry). l SUBTITLE Selects subtitle language for video. m TOP MENU Accesses the main menu of a video disc. n / (Previous/Next) • Skips to the previous or next track, chapter or file. • In radio mode, selects a preset radio station. English EN

c (Disc menu) Accesses or exits the disc menu. d Navigation buttons • Navigates menus. • In radio mode, press left or right to start auto search. e / (Previous/Next) • Skips to the previous or next track, chapter or file. • In radio mode, selects a preset radio station. f OK Confirms an entry or selection. g (Sound OPTIONS) Accesses or exits various sound OPTIONS. h (OPTIONS) • Accesses more play OPTIONS during playback. • In radio mode, programs radio stations. i (Play) Starts or resumes play. j +/- (Volume) Increases or decreases volume. k (Pause) Pauses play. l Source buttons / Color buttons • Blu-ray discs: Selects tasks or OPTIONS. • AUDIO SOURCE: Selects an audio input source. • DOCK for iPod: Switches to Philips Dock for iPod/iPhone. • RADIO: Switches to FM radio. • DISC: Switches to disc source. m Alphanumeric buttons Enters values or letters (using SMS style entry). n TOP MENU Accesses the main menu of a video disc. o SUBTITLE Selects subtitle language for video. Remote control - B a (Standby-On) • Switches the home theater on or to standby. • When EasyLink is enabled, press and hold for at least three seconds to switch all connected HDMI CEC compliant devices to standby. 3 4 6 7 8 9 11 12 13 14 1 2 5 15 5 16 10 18 17 EN

theater This section helps you connect your home theater to a TV and other devices. The basic connections of the home theater with its accessories are provided in the Quick Start. For a comprehensive interactive guide, see www.connectivityguide.philips.com. Note •• Refer to the type plate at the back or bottom of the product for identification and supply ratings. •• Before you make or change any connections, ensure that all devices are disconnected from the power outlet. Connectors Connect other devices to your home theater. Front connectors a (USB) Audio, video or picture input from a USB storage device. b MP3 LINK • Audio input from an MP3 player. • Connects to the auto calibration microphone. p (Stop) • Stops play. • Press and hold to eject the disc or open the disc compartment. • In radio mode, erases the current preset radio station. q / (Fast Backward/Fast Forward) Fast backwards or fast forwards. Press repeatedly to change the search speed. r (Back) Returns to a previous menu screen. English EN

Connect your home theater directly to a TV through one of the following connectors (from highest to basic quality video): a HDMI b Component video c Composite video Option 1: Connect to the TV through HDMI Note •• The HDMI connector on the TV might be labeled HDMI IN or HDMI ARC. •• If the TV supports HDMI Audio Return Channel (ARC), you can use it to output digital audio to the home theater. •• If the HDTV has a DVI connector, connect using an HDMI/DVI adapter. •• If the TV supports EasyLink HDMI CEC, control the home theater and TV with one remote control (see ‘Use Philips EasyLink’ on page 19). Option 2: Connect to the TV through YPbPr (component video) Note •• The component video cable or connector might be labeled Y Cb Cr or YUV. TV Back connectors a AC MAINS~ Connects to the power supply. b AUDIO IN-AUX 1/AUX 2 Connects to the analog audio output on the TV or an analog device. c SUBWOOFER Connects to the supplied subwoofer. d LAN Connects to the LAN input on a broadband modem or router. e HDMI OUT (ARC) Connects to the HDMI input on the TV. f VIDEO OUT Connects to the video input on the TV. g SD CARD Slot for SD card. Downloads video from online video stores (see ‘Access online video stores’ on page 17). h ANTENNA FM 75 Signal input from an antenna, cable or satellite. i VIDEO OUT (Y Pb Pr) Connects to the component video input on the TV. j DIGITAL IN-OPTICAL Connects to the optical audio output on the TV or a digital device. k DIGITAL IN-COAXIAL Connects to the coaxial audio output on the TV or a digital device. l DOCK for iPod Connects to a Philips Dock for iPod/iPhone. (See Quick Start guide.) m Wireless Rear Audio Connects to a Philips wireless module. (Model: Philips RWSS9500, sold separately.) n SPEAKERS Connects to the supplied speakers. EN

audio cables (Cable not supplied) Option 2: Connect audio through coaxial cable Note •• The digital coaxial cable or connector might be labeled COAXIAL/DIGITAL OUT or SPDIF OUT. (Cable not supplied) TV TV (Cable not supplied) Option 3: Connect to the TV through composite video (CVBS) Note •• The composite video cable or connector might be labeled AV IN, VIDEO IN, COMPOSITE or BASEBAND. Connect audio from TV or other devices Use your home theater to play audio from the TV or other devices such as a cable box. Tip •• Press SOURCE / AUDIO SOURCE repeatedly to select the audio output of your connection. Component Video Out Component Video In TV TV English EN

Set up network 1 Connect the home theater to a network router through wired or wireless network connection. This home theater has a built-in Wi-Fi for easy access to the wireless network. 2 Turn on your TV and switch to the correct source for the home theater. 3 Press (Home). 4 Select [Setup], then press OK. 5 Select [Network] > [Network Installation], then press OK. • For wired network, select [Wired (Ethernet)] and press OK. • For wireless network, select [Wireless (Wi-Fi)] and press OK. 6 Follow the instructions on the TV to complete the setup. » » The home theater connects to the Internet. If connection fails, select [Retry], then press OK. 7 Select [Finish], then press OK to exit. Caution •• Familiarize yourself with the network router, media server software and networking principles before attempting to connect the home theater to a computer network. If necessary, read documentation accompanying network components. Philips is not responsible for lost, damaged or corrupt data. LAN www Option 3: Connect audio through a digital optical cable Note •• The digital optical cable or connector might be labeled as SPDIF OUT or OPTICAL OUT. (Cable not supplied) Connect to a computer network and the Internet Connect the home theater to a computer network and enjoy: • Multimedia content streamed from your computer : view photos, play music and watch video files streamed from your computer (see ‘Play from PC (DLNA)’ on page 16). • Net TV : browse Net TV services (see ‘Browse Net TV’ on page 17). • Software update : update the software of the home theater through the network (see ‘Update software from the network’ on page 24). What you need: • A network router (with DHCP enabled). • A network cable (RJ45 straight cable). • A computer with media server software installed (see ‘Set up media server software’ on page 16). • For Net TV and software update, make sure that the network router has access to the Internet and is not restricted by firewalls or other security systems. TV EN

theater This section helps you use the home theater to play media from a wide range of sources. Before you start Check that you: • Make the necessary connections described in the Quick Start and User Manual. • Complete the first time setup. First time setup appears when you turn on the home theater for the first time. If you do not complete the setup, you are prompted to complete it each time you turn on the home theater. • Switch the TV to the correct source for the home theater. Access the home menu The home menu gives you easy access to connected devices, audio and video settings, and other features. 1 Press (Home). » » The home menu appears. 2 Press the Navigation buttons and OK to select the following: • [play Disc] : Starts disc play. • [browse USB] : Accesses the content browser of the connected USB storage device. • [browse iPod] : Accesses the content browser of the connected iPod or iPhone. • [browse PC] : Accesses the content browser of the connected PC network. • [browse Net TV] : Accesses Net TV. • [Setup] : Accesses menus to change picture, sound and other settings. • [User Manual] : Launches the electronic user manual. Connect a wireless module Note •• When you connect and switch on the wireless module, the rear speaker connectors on the home theater are muted, the rear surround sound is output through the connectors on the wireless receiver. (Wireless module not supplied - Philips RWSS9500) Wireless Rear Audio English EN

Select predefined sound modes to suit your video or music. 1 Press SOUND SETTINGS / (Sound OPTIONS). 2 Select SOUND, then press OK. 3 Press the Navigation buttons (up/down) to select the following settings: • ACTION/ROCK : Enhanced low and high-range. Ideal for action movies and rock or pop music. • DRAMA/JAZZ : Clear mid and high- range. Ideal for drama movies and jazz music. • GAMING/PARTY : Moderate low- range and strong mid-range. Ideal for video games and party. • CONCERT/CLASSIC : Neutral sound. Ideal for live concerts and classical music. • SPORTS : Moderate mid-range and surround effects for clear vocals and the atmosphere of a live sport venue. • NEWS : Enhanced mid-range for clear vocals and speech. 4 Press OK to confirm your choice. Change surround sound mode Experience an immersive audio experience with surround sound modes. 1 Press SOUND SETTINGS / (Sound OPTIONS). 2 Select SURROUND, then press OK. 3 Press the Navigation buttons (up/down) to select the following settings: • 360SOUND : 9.1 surround sound mode, best cinematic experience. • 360SOUND STEREO : Enhanced stereo mode with 4.1 channels. • STEREO : Two-channel stereo sound. Ideal for listening to music. • MULTI-CH : Traditional 5.1 channels for a more relaxing cinematic experience. 4 Press OK to confirm your choice. Choose your sound This section helps you choose the ideal sound for your video or music. 1 Press SOUND SETTINGS / (Sound OPTIONS). 2 Press the Navigation buttons (left/right) to access the sound OPTIONS. Sound experience Description AUTO VOLUME Sets a constant output signal at the speaker output. This option is best for TV audio input where the commercial signal level is usually higher than the content. SOUND Selects a sound mode. SURROUND Selects a surround sound or stereo sound. TREBLE Adjusts the high frequency output. MID Adjusts the middle frequency output. BASS Adjusts the low frequency output. AUDIO SYNC Delays the audio to match the video. 3 Select an option, then press OK. 4 Press BACK to exit. If you do not press a button within five seconds, it automatically exits the menu. Change auto volume Select the level of volume which output from your TV or other devices to the home theater. 1 Press SOUND SETTINGS / (Sound OPTIONS). 2 Select AUTO VOLUME, then press OK. 3 Press the Navigation buttons (up/down) to select ON or OFF. 4 Press OK to confirm your choice. EN

next track, chapter or file. / Fast backwards or fast forwards. Press repeatedly to change the search speed. Navigation buttons (up/down) Rotates the picture counter-clockwise or clockwise. SUBTITLE Selects subtitle language for video. POP-UP MENU/ DISC MENU / (Disc menu) Accesses or exits the disc menu. OPTIONS / (OPTIONS) Accesses more play OPTIONS during playback. For video formats such as, DivX and WMV: • To stop play, press . • To resume the video from where you stopped, press (Play). • To play the video from the start, press OK. Note •• To play DivX DRM - protected files from a disc or a USB storage device, connect your home theater to a TV through an HDMI cable. Use Bonus View on Blu-ray Blu-ray discs that support the Bonus View feature (also known as Picture-In-Picture) allow you to view special content such as a director’s commentary while watching the main feature. 1 If necessary, enable BonusView (or Picture- In-Picture) in the Blu-ray disc menu. 2 During playback of the main feature, press OPTIONS / (OPTIONS). » » The OPTIONS menu is displayed. 3 Select [PIP Selection] > [PIP], then press OK. » » PIP OPTIONS [1]/[2] depend on the video contents. » » The picture-in-picture video appears in a small window. Change treble, mid and bass Change the high frequency (treble), mid frequency (mid) and low frequency (bass) settings of the home theater to suit your video or music. 1 Press SOUND SETTINGS / (Sound OPTIONS). 2 Select TREBLE, MID or BASS, then press OK. 3 Press the Navigation buttons (up/down) to adjust the frequency level. 4 Press OK to confirm. Synchronize audio with video If the audio and video are not synchronized, you can delay the audio to match the video. 1 Press SOUND SETTINGS / (Sound OPTIONS). 2 Select AUDIO SYNC, then press OK. 3 Press the Navigation buttons (up/down) to sync the audio with the video. 4 Press OK to confirm. Play a disc The home theater can play a wide variety of discs, including video, audio and mixed media (for example, a CD-R that contains JPEG pictures and MP3 music). 1 Insert a disc into the home theater. 2 Press DISC, or select [play Disc] in the home menu and press OK. » » The disc plays or the disc main menu appears. 3 Press the following buttons to control play: Button Action Navigation buttons Navigate menus. OK Confirms an entry or selection. (Play) Starts or resumes play. Pauses play. Stops play. English EN

Your home theater can play 3D videos on 3D TVs. Before you start, make sure that: • your TV is a 3D TV, and is connected to your home theater through HDMI, • your disc is a Blu-ray 3D disc, and • you have 3D glasses that are compatible with your 3D TV. 1 Insert a Blu-ray 3D disc into your home theater. » » Your TV switches to the correct HDMI source, and the disc plays automatically. 2 If the disc does not play automatically, press DISC or select [play Disc] in the home menu, and then press OK. 3 Press the play buttons to control play. When you search forward or backward, and in some other play modes, the video displays in 2D. It returns to 3D when you play normally again. 4 Put on the 3D glasses to enjoy the 3D effects. Play 3D discs in 2D 1 Press (Home). 2 Select [Setup] > [Video] > [Blu-ray 3D video] > [Off]. 3 Press OK. 4 Play your Blu-ray 3D disc. » » The 3D video is displayed in 2D. Play from a USB storage device The home theater is fitted with a USB connector that allows you to view pictures, listen to music or watch movies stored on a USB storage device. 1 Connect the USB storage device to the home theater. 2 Press (Home). » » The home menu appears. 3 Select [browse USB], then press OK. » » A content browser appears. 4 Select a file, then press OK. 5 Press the playback buttons to control play (see ‘Play a disc’ on page 13). 4 Select [2nd Audio Language] or [2nd Subtitle Language], then press OK. 5 Select the language to play, then press OK. Note •• To turn off the Bonus View (Picture-in- Picture), press OPTIONS / (OPTIONS), select [PIP Selection] > [Off], then press OK. Access BD-Live on Blu-ray BD-Live enabled Blu-ray discs include exclusive services such as movies and other online bonuses. 1 Prepare the internet connection and set up the network (see ‘Connect to a computer network and the Internet’ on page 10). 2 Connect the USB storage device to the home theater. 3 Select the BD-Live icon in the disc menu, then press OK. » » BD-Live starts to load. The loading time depends on the disc and your internet connection. 4 Press the Navigation buttons to navigate BD-Live. 5 Press OK to select an item. Note •• The range of BD-Live services depends on the disc. •• When you use BD-Live, data on the disc and home theater are accessed by the content provider. •• Use a USB storage device with at least 1GB of free space to store the downloaded files. •• If there is insufficient memory to download BD-Live content, clear memory space. EN

• [Chapters] : Selects a specific chapter. • [Angle List] : Selects a different camera angle. • [Menus] : Displays the disc menu. • [PIP Selection] : Displays Picture-in- Picture window. • [Zoom] : Zooms into a video scene or picture. Press the Navigation buttons (left/right) to select a zoom factor. • [Repeat] : Repeats a chapter or title. • [Repeat A-B] : Marks two points within a chapter or track for repeat play, or turns off repeat mode. • [Picture Settings] : Selects a predefined color setting. Use picture OPTIONS Access several useful features while viewing pictures. 1 Press OPTIONS / (OPTIONS). » » The pictures OPTIONS menu appears. 2 Press the Navigation buttons and OK to select and adjust: • [Rotate +90] : Rotates the picture 90 degree clockwise. • [Rotate -90] : Rotates the picture 90 degree counter-clockwise. • [Zoom] : Zooms into a video scene or picture. Press the Navigation buttons (left/right) to select a zoom factor. • [Info] : Displays picture information. • [Duration per slide] : Sets the display speed for each picture in a slide show. • [Slide Animation] : Selects animation for the slide show. • [Picture Settings] : Selects a predefined color setting. • [Repeat] : Repeats a selected folder. Note •• If the USB storage device does not fit into the connector, use a USB extension cable. •• The home theater does not support digital cameras that need a computer program to display photos. •• The USB storage device must be NTFS, FAT or DOS-formatted, and Mass Storage Class compliant. More play features for disc or USB Several advanced features are available for video or picture playback from a disc or USB storage device. Use video OPTIONS Access several useful features while viewing video. Note •• Available video OPTIONS depend on the video source. 1 Press OPTIONS / (OPTIONS). » » The video OPTIONS menu appears. 2 Press the Navigation buttons and OK to select and adjust: • [Audio Language] : Selects audio language for video. • [Subtitle Language] : Selects subtitle language for video. • [Subtitle Shift] : Adjusts the subtitle position on the screen. • [Info] : Displays information about what is playing. • [Character Set] : Selects a character set that supports the DivX subtitle. • [Time Search] : Skips to a specific part of the video by entering the time of the scene. • [2nd Audio Language] : Selects the second audio language to play. • [2nd Subtitle Language] : Selects the second subtitle language to play. English EN

Before you start: • Connect your home theater to your home network (see ‘Connect to a computer network and the Internet’ on page 10). • Connect your PC to the same home network. • Make sure that your PC firewall allows you to run Windows Media Player programs. In Microsoft Windows Media Player 11 1 Connect the home theater to a network router (see ‘Connect to a computer network and the Internet’ on page 10). 2 Switch on the computer and router. 3 Open Windows Media Player on the computer. 4 Select Library > Media Sharing, then select settings to share your media. 5 Select Library > Add to Library, then select settings to share the folder containing your media. 6 Select Advanced OPTIONS, then add the folders to share. 7 Select Library > Apply Media Information Changes to activate the changes. In Macintosh OS X Twonky Media (v4.4.2) 1 Connect the home theater to a network router (see ‘Connect to a computer network and the Internet’ on page 10). 2 Switch on the Macintosh and router. 3 Visit www.twonkymedia.com to purchase the software or download a free 30-day trial to your Macintosh. 4 Open Twonky Media on the Macintosh. » » The media sharing setting is turned on by default, thus enabling you to directly add folders for media sharing. 5 Select Basic Setup > Sharing, then select settings to add a folder location or add more folders. 6 Select Save Changes to activate the changes. Use audio OPTIONS Access several useful features while audio is played. 1 Press OPTIONS / (OPTIONS) repeatedly to cycle through the following functions: • REPEAT TRACK : Repeats the current track. • REPEAT DISC : Repeats all the tracks on the disc or folder. • REPEAT RANDOM : Plays audio tracks in random order. • REPEAT OFF : Turns off repeat mode. Play a musical slideshow Play music and pictures simultaneously to create a musical slideshow. 1 Select a music track, then press OK. 2 Press BACK and go to the picture folder. 3 Select a picture, then press OK to start slideshow. 4 Press to stop slideshow. 5 Press again to stop music. Play from PC (DLNA) When you connect your home theater to your home network, you can play music, photo, and video from a computer or other media server on that network. What you need: • A wired or wireless home network, connected with a Universal Plug and Play (uPnP) router. • A Philips wireless USB adapter or a LAN able to connect your home theater to your home network. • A media server such as: • PC running Windows Media Player 11 or higher; or • Mac running Twonky Media Server. For help to use other media servers, such as TVersity, see the web site of the media server. EN

Clear browsing history to remove passwords, cookies and browsing data from your home theater. 1 Press (Home). 2 Select [Setup], then press OK. 3 Select [Network] > [Clear Net TV Memory], then press OK . Access online video stores Rent videos from online stores, through your home theater. You can watch them right away or later. Many online video stores offer a huge choice of video, with different rental prices, periods, and conditions. For some stores, you must create an account before you can rent. What you need: • A high-speed internet connection to the home theater (see ‘Connect to a computer network and the Internet’ on page 10). • An HDMI connection between your home theater and TV. • An SD memory card of type SDHC Class 6, with at least 4GB of memory. Format an SD card Before you can rent online videos, your SD card must be in the SD card slot and formatted. After formatting, leave the card in place so that you are always ready to rent or watch. When you have downloaded a video to your card, you can watch it only on your home theater. You can’t move the card and watch it on another device. If you move the card and format it in another device, your downloaded video is erased. You must download your video again before you can watch. To format an SD card 1 Switch your TV to the correct HDMI source for your home theater. Play multimedia content Note •• Before playing multimedia content from the computer, ensure that the home theater is connected to the computer network and the media server software is properly set up. 1 Press (Home). » » The home menu appears. 2 Select [browse PC], then press OK. » » A content browser appears. 3 Select a file, then press OK. 4 Press the playback buttons to control play (see ‘Play a disc’ on page 13). Browse Net TV With the home theater connected to the Internet, you can use Net TV to access videos, pictures, music, information, games and other online services. Note •• Koninklijke Philips Electronics N.V. bears no responsibility for content provided by Net TV service providers. Access Net TV 1 Prepare the internet connection and set up the network (see ‘Connect to a computer network and the Internet’ on page 10). 2 Press (Home). » » The home menu appears. 3 Select [browse Net TV], then press OK. » » The Net TV home page appears. 4 Press the Navigation buttons to navigate Net TV web pages or services. 5 Press OK to view or select an item. 6 Press BACK to return to the previous page, or press (Home) to exit. English EN

The home theater can store up to 40 radio stations. 1 Check that the FM antenna is connected. 2 Press RADIO. » » “AUTO INSTALL...PRESS PLAY’ appears on the display panel if you have not installed any radio stations. Press (Play). 3 Press the following buttons to control play: Button Action / Selects a preset radio station. Navigation buttons (left/right) Searches for a radio station. Navigation buttons (up/down) Fine tunes a radio frequency. Press and hold to erase the preset radio station. Press to stop the installation of radio stations. OPTIONS / (OPTIONS) Manual: Press once to access program mode, and press again to store the radio station. Automatic: Press and hold for five seconds to reinstall radio stations. RADIO Toggles between stereo and mono sound. Note •• AM and digital radio are not supported. •• If no stereo signal is detected, you are prompted to install the radio stations again. •• For the best reception, place the antenna away from the TV or other sources of radiation. 2 Insert the SD memory card into the SD CARD slot on your home theater. 3 Follow the on-screen instructions to format the card. » » Any content on the card is erased during formatting. 4 After formatting, leave the card in the SD CARD slot. Rent and play online video 1 Prepare the internet connection (see ‘Connect to a computer network and the Internet’ on page 10). 2 Press (Home). 3 Select [browse Net TV] > Video stores (Video stores), and then press OK. 4 Press the Navigation buttons to navigate to a video store, and press OK. 5 If prompted, follow the video store instructions to register or log in to an account. » » You see an option to rent videos. » » If you have rented videos and are still within the rental period, you also see an option to watch the videos. 6 Follow the video store instructions to rent or watch a video. » » The video is downloaded to your SD memory card. You can watch it now or at any time within the rental period. 7 Press the play buttons on your remote control to play, pause, search, and stop the video. EN

1 Dock your iPod or iPhone (see ‘Dock your iPod or iPhone’ on page 999). 2 Press DOCK for iPod on the home theater remote control. » » The playlists are displayed on the TV. 3 Press the Navigation buttons and OK to select and play tracks. Watch video or view slideshows Note •• On iPod, enable the TV ON setting. •• On iPhone, select the TV Out option. 1 Dock your iPod or iPhone (see ‘Dock your iPod or iPhone’ on page 999). 2 Switch the TV to the AV/VIDEO source (corresponding to the yellow composite cable). » » The TV screen goes blank. 3 Browse on the iPod or iPhone screen to select videos or photos. 4 Press (Play) to play the video and photos. » » The picture is displayed on the TV. Use Philips EasyLink The home theater supports Philips EasyLink, which uses the HDMI CEC (Consumer Electronics Control) protocol. EasyLink- compliant devices that are connected through HDMI connectors can be controlled by a single remote control. Note •• Philips does not guarantee 100% interoperability with all HDMI CEC devices. 1 Switch on the HDMI CEC operations on the TV and other connected devices. See the manual of the TV or other devices for details. 2 Press (Home). Play audio from TV or other devices Press SOURCE / AUDIO SOURCE repeatedly to select the audio output of the connected device. Play from an MP3 player Connect and play audio files from an MP3 player or other external audio devices. 1 Connect the MP3 player to the home theater as described in the Quick start guide. 2 Press SOURCE / AUDIO SOURCE repeatedly until ‘MP3 LINK’ appears on the display panel. 3 Press the buttons on the MP3 player to select and play audio files. Play from an iPod or iPhone By connecting and installing a Philips Dock for iPod/iPhone, you can use the home theater to play music, movies and photos from your iPod or iPhone. Note •• You can charge your iPod/iPhone on the dock while the home theater is in iPod mode. Dock your iPod or iPhone 1 Move the slide at the bottom of the dock to ‘STANDARD’, then connect the dock to the home theater. 2 Connect the yellow composite cable from the dock to the TV. 3 Switch on the iPod or iPhone and place it in the dock. 4 On the home theater remote control, press (Home), then select [browse iPod] and press OK. English EN

your home theater. Caution •• Most of the settings are already configured with the best value for the home theater. Unless you have a specific reason to change a setting, it is best to leave it at the default value. Access the setup menu 1 Press (Home). 2 Select [Setup], then press OK. » » The setup menu appears. 3 Select a setup menu, then press OK. See the following sections for information about how to change the settings of your home theater. 4 Press BACK to return to the previous menu, or press to exit. Note •• You cannot change a setting that is grayed out. Change video settings 1 Press (Home). 2 Select [Setup], then press OK. 3 Select [Video], then press OK. 4 Select and adjust the following settings: • [TV Display]: Selects a picture display format to fit the TV screen. • [HDMI Video]: Selects the HDMI video resolution. • [HDMI Deep Color]: Displays colors with more shades and hues when the video content is recorded in Deep Color and the TV supports this feature. 3 Select [Setup], then press OK. 4 Select [EasyLink] > [EasyLink], then press OK. 5 Select [On], then press OK. 6 You can now enjoy the following Philips EasyLink controls. One-touch play When you play a disc, the TV automatically switches to the correct channel. One-touch standby When you press and hold (Standby) on the remote control, the home theater and all the connected HDMI CEC devices (if they support one-touch standby) switch to standby mode simultaneously. System Audio Control When you play a device that has its audio output routed to the home theater, the home theater switches to the corresponding audio source automatically. To use one-touch audio, enable this feature and follow the instructions on the TV to map the connected devices correctly to the audio input jacks of the home theater. Audio Input Mapping Updates audio input mapping if there are new devices connected. EN

Note •• For settings related to HDMI, the TV must be connected through HDMI. •• Night mode is available for Dolby encoded DVD and Blu-ray discs (for models support Blu-ray playback). Set up surround sound automatically When you set up the home theater for the first time, the setup menu prompts you to calibrate your speakers for the best surround sound. If you move your speakers or change the layout of the room, calibrate the speakers again to continue getting the best sound. Before you start, make sure that the calibration microphone is less than 5m from each of the speakers. If it is more, set up your sound manually (see ‘Set up surround sound manually’ on page 22). 1 Connect your speakers and subwoofer as described in the Quick Start. For the best surround sound, turn your rear speakers to face your listening position. 2 Connect the calibration microphone to the MP3 LINK connector on your home theater and place it in your usual listening place, at ear height. • [Component Video]: Selects the component video resolution. Copy- protected DVDs can display only 480p/576p or 480i/576i. • [Blu-ray 3D video]: Selects the 3-dimensional video output when you play a 3D video on your home theater. The home theater must be connected to a 3D TV through HDMI. • [Picture Settings]: Selects a predefined color setting. 5 Press OK to confirm your choice. Note •• The best setting is automatically selected for the TV. If you change the setting, ensure that the TV supports the new setting. •• For settings related to HDMI, the TV must be connected through HDMI. •• For settings related to progressive or component video, the TV must be connected through Component Video. Change audio settings 1 Press (Home). 2 Select [Setup], then press OK. 3 Select [Audio], then press OK. 4 Select and adjust the following settings: • [Night Mode]: Selects quiet or full dynamic sound. Night mode decreases the volume of loud sounds and increases the volume of soft sounds such as speech. • [HDMI Audio]: Selects HDMI audio format or disables HDMI audio output for the TV. • [360Sound Setup]: Calibrates the speakers to 360 degrees SOUND SETTINGS when a calibration microphone is connected to the home theater. • [Speaker Setup]: Sets the volume level and distance of each speaker to obtain the best possible surround sound based on your room setup. English EN

the current network settings. • [View Wireless Settings] : Displays the current Wi-Fi settings. • [Net TV User Location] : Selects the location for accessing Net TV content and services. • [Clear Net TV Memory] : Clears Net TV memory, delete the temporary downloaded files (e.g., cookies) of the Net TV browser. 5 Press OK to confirm your choice. Set up EasyLink 1 Press (Home). 2 Select [Setup], then press OK. 3 Select [EasyLink], then press OK. 4 Select and adjust the following settings: • [EasyLink] : Enables or disables EasyLink. • [One Touch Play] : Enables or disables One Touch Play. If enabled, you can use the remote control to start disc play in the home theater and the TV switches automatically to the correct channel. • [One Touch Standby] : Enables or disables One Touch Standby. If enabled, the home theater can be switched off to standby by a remote control from the TV or other connected HDMI CEC devices. • [System Audio Control] : Enables or disables System audio control. If enabled, follow the instructions on the TV to map the connected devices correctly to the audio connectors of the home theater. The home theater switches automatically to the audio source of the connected device. • [Audio Input Mapping] : Updates audio input mapping if there are new devices connected. 5 Press OK to confirm your choice. Note •• The connected devices must be connected through HDMI and switched on. 3 Make sure that there is nothing between the speakers and the microphone to block the sound, and make sure that the room is quiet. For example, switch off your TV or radio, close doors and windows, and switch off the air conditioning. Don’t put the microphone on top of speaker. 4 Press (Home) on your home theater remote control, and select [Setup] > [Audio] > [360Sound Setup]. 5 Follow the onscreen instructions to set up the sound. » » During the calibration, you hear a series of test tones from the speakers and the subwoofer. These sounds are normal - don’t change the volume or move the speakers, and be sure to keep quiet until the calibration finishes. 6 After the auto calibration, disconnect the calibration microphone. Set up surround sound manually Your home theater has a calibration microphone that allows you to calibrate your speakers automatically. If your speakers are more than 5m (16 feet) away from the calibration microphone, you can still get the best surround sound by setting them up manually. 1 Connect your speakers and subwoofer as described in the Quick Start. For the best surround sound, turn your rear speakers to face your listening position. 2 Press (Home) on your home theater remote control, and select [Setup] > [Audio] > [Speaker Setup]. 3 Enter the distance for each speaker, and then listen to the test tones and adjust the volume. Set up network 1 Press (Home). 2 Select [Setup], then press OK. 3 Select [Network], then press OK. 4 Select and adjust the following settings: • [Network Installation] : Starts wired (Ethernet) or wireless setup. Follow the instructions to set up the network connection. EN

switch the home theater to standby after a specific time. 5 Press OK to confirm your choice. Note •• If your preferred disc language is not available, you can select [Other] from the list and enter the 4-digit language code which can be found at the back of this manual. •• If you select a language that is not available on a disc, the home theater uses the default language of the disc. Change advanced settings 1 Press (Home). 2 Select [Setup], then press OK. 3 Select [Advanced], then press OK. 4 Select and adjust the following settings: • [BD-Live Security] : Restricts or allows access to BD-Live. • [Enhanced Audio] : Enables or disables the audio post processing at the speaker output. • [Software Update] : Selects to update software from the network or from USB storage device. • [Clear memory] : Clears local memory, delete the BD-Live files that you previously downloaded. If using an USB storage device, the local storage folder is ‘BUDA’. • [DivX® VOD Code] : Displays the DivX VOD registration code for the home theater. • [Version Info.] : Displays the software version for the home theater. • [Restore default settings] : Resets the home theater to the default settings programmed at the factory. 5 Press OK to confirm your choice. Note •• You cannot restrict internet access on commercial Blu-ray discs. •• Before you purchase DivX videos and play them on the home theater, register the home theater on www.divx.com using the DivX VOD code. •• You cannot reset parental control setting to its default value. Multiview On Philips 21:9 Cinema TV (model 58PFL9955H/12), you can watch two video sources side by side. The sources can be: • video from your home theater, • TV broadcasts, and • Net TV. For information about how to set up multi-view, see your TV user manual. Change preference settings 1 Press (Home). 2 Select [Setup], then press OK. 3 Select [Preference], then press OK. 4 Select and adjust the following settings: • [Menu language] : Selects the on-screen display menu language. • [Audio] : Selects audio language for video. • [Subtitle] : Selects subtitle language for video. • [Disc Menu] : Selects menu language for video disc. • [Parental Control] : Restricts access to discs that are recorded with ratings. To play all discs irrespective of the rating, select level ‘8’. • [Screen Saver] : Enables or disables screen saver mode. If enabled, the screen enters idle mode after 10 minutes of inactivity (for example, in pause or stop mode). • [Auto Subtitle Shift] : Enables or disables shift subtitle. If enabled, it adjusts the subtitle position automatically to fit the TV screen. • [Change Password] : Sets or changes a PIN code to play a restricted disc. Enter ‘0000’ if you do not have a PIN or if you have forgotten your PIN. • [Display Panel] : Changes the brightness of the display panel. • [Auto Standby] : Enables or disables auto standby. If enabled, the home theater switches to standby after 30 minutes of inactivity (for example, in pause or stop mode). • [VCD PBC] : Displays or skips the content menu for VCD and SVCD discs. English EN

1 Check for the latest software version on www.philips.com/support. • Search for your model and click on ‘software and drivers’. 2 Create a folder named ‘UPG’ in the root directory of your USB storage device. 3 Download the software into the ‘\UPG’ folder of the USB storage device. 4 Unzip the software in the ‘\UPG’ folder. 5 Connect the USB storage device to the home theater. 6 Press (Home) and select [Setup]. 7 Select [Advanced] > [Software Update] > [USB]. 8 Follow the instructions on the TV to confirm the update. » » When complete, the home theater automatically switches off and restarts. • If not, disconnect the power cord for a few seconds and then reconnect it. Caution •• Do not turn off the power or remove the USB storage device when the software update is in progress because you might damage the home theater. 6 Update software To check for new updates, compare the current software version of your home theater with the latest software version (if available) on the Philips web site. Check software version 1 Press (Home). 2 Select [Setup], then press OK. 3 Select [Advanced] > [Version Info.], then press OK. » » The software version is displayed. Update software from the network 1 Prepare the internet connection (see ‘Connect to a computer network and the Internet’ on page 10). 2 Press (Home) and select [Setup]. 3 Select [Advanced] > [Software Update] > [Network]. » » If an upgrade media is detected, you are prompted to start or cancel the update. 4 Follow the instruction on the TV to confirm the update. » » When complete, the home theater automatically switches off and restarts. • If not, disconnect the power cord for a few seconds and then reconnect it. Note •• If the home theater is unable to connect to the Philips server, press (Home), select [Setup] > [Network] > [Network Installation] to set up the network. EN

without notice. Region code The type plate on the back or bottom of the home theater shows which regions it supports Playback media •• AVCHD, BD-RE, BD-Video, DVD-Video, DVD+R/+RW, DVD-R/-RW, DVD+R/-R DL, CD-R/CD-RW, Audio CD, Video CD/ SVCD, Picture files, MP3 media, WMA media, DivX (Ultra)/DivX Plus HD media, USB storage device File Format •• Audio: .mp3, .wma, .wav •• Video: .avi, .divx, .mp4, .mkv, .wmv •• Picture: .jpg, .gif, .png Amplifier •• Total output power: 800W RMS •• Frequency response: 40 Hz-20 kHz / ±3dB •• Signal-to-noise ratio: > 65 dB (CCIR) / (A-weighted) Country DVD BD Europe, United Kingdom Korea Latin America Australia, New Zealand Russia, India China A A C C Asia Pacific, Taiwan, Update electronic user manual 1 Check the current version of the electronic user manual installed in your home theater (see ‘Check software version’ on page 24). 2 Insert a USB storage device into your PC. 3 In your web browser, navigate to www. philips.com/support, and find your product. 4 Click on ‘Software and drivers’ in the left panel, and then locate the ‘Electronic Manual’. The electronic user manual is compressed into a *.zip archive. 5 If the *.zip file at the Philips Support website is a later version than the file in your home theater, download the file in the root directory of your USB storage device. 6 Unzip the downloaded file in the root directory of the USB storage device. » » A file named ‘HTSxxxxeDFU.zip’ is extracted in the ‘\UPG’ folder of your USB storage device, ‘xxxx’ being the model number of your home theater. 7 Disconnect the USB storage device from the PC, and connect it to the home theater. 8 Press (Home). • Ensure that there is no disc inside the disc compartment of your home theater and it is closed. 9 Press [3], [3], [8] on the remote control. » » Software update starts. When complete, the home theater automatically switches off and restarts. 10 When complete, disconnect the USB storage device from the home theater. Caution •• Do not turn off the power or remove the USB storage device during the update. •• If power failure occurs during the update, do not remove the USB flash drive from the home theater. The home theater continues the update as soon as the power is restored. •• If an error occurs during the update, retry the procedure. If the error reoccurs, contact Philips Consumer Care. English EN

•• Speaker drivers: 165 mm (6.5”) woofer •• Frequency response: 40 Hz-150 Hz •• Dimensions (WxHxD): 196 x 397 x 342 (mm) •• Weight: 6.4 kg •• Cable length: 3 m Speakers •• System: full range satellite •• Speaker impedance: 4 ohm (center), 6 ohm (Front/Rear) •• Speaker drivers: • Center: 2 x 2.5” woofer + 1” soft-dome tweeter • Front/Rear: 2 x 2.5” full range + 2.5” woofer + 1” soft-dome tweeter •• Frequency response: 150 Hz-20 kHz •• Dimensions (WxHxD): • Center: 435 x 85 x 111 (mm) • Front/Rear : 99 x 247 x 117 (mm) •• Weight: • Center: 1.67 kg • Front/Rear : 1.17 kg/each •• Cable length: • Center: 2 m • Front: 3 m • Rear: 10 m Laser Specification •• Laser Type (Diode): InGaN/AIGaN (BD), AIGaInP (DVD/CD) •• Wave length: 405 +5nm/-5nm (BD), 655 +5nm/-10nm (DVD), 790 +10nm/-10nm (CD) •• Output power (Max. ratings): 20mW (BD), 6mW (DVD), 7mW (CD) •• Input sensitivity: • AUX1, AUX2: 400 mV • MP3 LINK: 150 mV Video •• Signal system: PAL / NTSC •• Component video output: 480i/576i, 480p/576p, 720p, 1080i •• HDMI output: 480i/576i, 480p/576p, 720p, 1080i, 1080p, 1080p24 Audio •• S/PDIF Digital audio input: • Coaxial: IEC 60958-3 • Optical: TOSLINK •• Sampling frequency: • MP3: 32 kHz, 44.1 kHz, 48 kHz • WMA: 44.1 kHz, 48 kHz •• Constant bit rate: • MP3: 112 kbps - 320 kbps • WMA: 48 kbps - 192 kbps Radio •• Tuning range: • Europe/China: FM 87.5-108 MHz (50 kHz) • Asia Pacific/Russia/Latin America/India: FM 87.5-108 MHz (50/100kHz) •• Signal-to-noise ratio: FM 55 dB •• Frequency response: FM 60 Hz-12.5 kHz / ±3dB USB •• Compatibility: Hi-Speed USB (2.0) •• Class support: UMS (USB Mass Storage Class) •• File system: NTFS, FAT16, FAT32 •• Maximum memory support: < 160GB Main Unit •• Power supply: • Europe/China: 220-240V, ~50 Hz; • Latin America/Asia Pacific: 110-127V/220-240V, ~50-60Hz; • Russia/India: 220-240V, ~50Hz •• Power consumption: 125 W •• Standby power consumption: ≤ 0.22 W •• Dimensions (WxHxD): 437 x 75 x 342 (mm) •• Weight: 4.5 kg EN

and select the correct input source (for example, SOURCE / AUDIO SOURCE) for the device you want to play. No sound on HDMI connection. •• You might not hear any sound if the connected device is not HDCP (High- bandwidth Digital Content Protection) compliant or only DVI compatible. Use an analog or digital audio connection. •• Ensure that the [HDMI Audio] is enabled. No sound from TV program. •• Connect an audio cable from the audio input on the home theater to the audio output on the TV, then press SOURCE / AUDIO SOURCE repeatedly to select the correct audio source. Distorted sound or echo. •• Ensure that the TV volume is muted or set to minimum if you are playing audio through the home theater. Audio and video are not synchronized. •• 1) Press SOUND SETTINGS / (Sound OPTIONS) . 2) Press the Navigation buttons (left/right) repeatedly until AUDIO SYNC is displayed, then press OK. 3) Press the Navigation buttons (up/down) to sync the audio with the video. Cannot calibrate the speakers by using the calibration microphone. •• Ensure that the speakers, subwoofer, and calibration microphone are connected as described in the Quick Start. •• Try a different position for the speakers, and then calibrate the speakers again. •• Ensure that you follow all the steps for auto calibration (see ‘Set up surround sound automatically’ on page 21). •• If you cannot calibrate the speakers automatically, or are unhappy with the automatic settings, set up the speakers manually (see ‘Set up surround sound manually’ on page 22). Play Disc cannot be played. •• Clean the disc. •• Ensure that the home theater supports the disc (see ‘Product specifications’ on page 25). 8 Troubleshooting Warning •• Risk of electric shock. Never remove the casing of the product. To keep the warranty valid, never try to repair the product yourself. If you have problems using this product, check the following points before you request service. If you still have a problem, register your product and get support at www.philips.com/welcome. If you contact Philips, you will be asked for the model and serial number of your product. The model number and serial number are on the back or bottom of your product. Write the numbers here: Model No. __________________________ Serial No. ___________________________ Main unit The buttons on this home theater do not work. •• Disconnect the home theater from the power outlet for a few minutes, then reconnect. Picture No picture. •• Ensure that the TV is switched to the correct source for the home theater. No picture on HDMI connection. •• Change the HDMI video setting or wait for 15 seconds for auto recover. •• Check if the HDMI cable is faulty. Replace with a new HDMI cable. No picture on the Component (Y Pb Pr) connection. •• If the HDMI video connection is set to [Auto] or [1080p/24Hz], there is no video output through the component connection. Change the HDMI video setting or remove the HDMI connection. No high-definition video signal on the TV. •• Ensure that the disc contains high-definition video. •• Ensure that the TV supports high-definition video. English EN

•• Connect a yellow composite cable from the dock to the TV. •• Switch the TV to the AV/VIDEO source (corresponding to the yellow composite cable). •• Press PLAY on the iPod or iPhone to start the slideshow. The audio is interrupted when I play music from my iPod or iPhone in the docking station. •• Ensure that you have installed the latest firmware on your iPod or iPhone. For more information, refer to the support website of your iPod or iPhone. My 3D video plays in 2D mode. •• Ensure that your home theater is connected to your 3D TV through HDMI. •• Ensure that your disc is a Blu-ray 3D disc. •• Ensure that the [Blu-ray 3D video] setting is turned on (see ‘Change video settings’ on page 20). I see black video on my TV screen. •• Ensure that your home theater is connected to the TV through HDMI. •• Switch to the correct HDMI source on your TV. I cannot download the video from the online video store. •• Ensure that your home theater is connected to the TV through HDMI. •• Ensure that the SD card is in place and formatted. •• Ensure that the SD memory card has enough memory to download the video, and is of type SDHC Class 6. •• Ensure that you have paid for the video and are within the rental period. •• Check the network connection (see ‘Connect to a computer network and the Internet’ on page 10). •• Contact the online video store for more help. Network Wireless network not found or distorted. •• Ensure that the wireless network is not disturbed by the microwave ovens, dect phones or other Wi-Fi devices in your neighbourhood. •• Try the wired network installation if the wireless network does not work properly (see ‘Set up network’ on page 999). •• Ensure that the home theater supports the region code of the disc. •• For DVD±RW or DVD±R, ensure that the disc is finalized. DivX video files cannot be played. •• Ensure that the DivX file is encoded according to the ‘Home Theater Profile’ with the DivX encoder. •• Ensure that the DivX video file is complete. DivX subtitles do not display correctly. •• Ensure that the subtitle file name is the same as the movie file name. •• Select the correct character set: 1) Press OPTIONS / (OPTIONS). 2) Select [Character Set]. 3) Select the supported character set. 4) Press OK. The contents of a USB storage device cannot be read. •• Ensure that the format of the USB storage device is compatible with the home theater (see ‘Product specifications’ on page 25). •• Ensure that the USB storage device is formatted with a file system that is supported by the home theater. ‘No entry’ or ‘x’ sign appears on the TV. •• The operation is not possible. EasyLink feature does not work. •• Ensure that the home theater is connected to a Philips brand EasyLink TV and that EasyLink is on. I do not want my home theater to be switched on when I switch on my TV. •• This is the correct behavior for Philips EasyLink (HDMI-CEC). To make the home theater work independently, switch off EasyLink. I cannot access BD-Live features. •• Check the network connection (see ‘Connect to a computer network and the Internet’ on page 10) or ensure that the network has been set up (see ‘Set up network’ on page 10). •• Clear memory storage. (see ‘Change advanced settings’ on page 23) •• Ensure that the Blu-ray disc supports BD- Live feature. The video (movies, photos, video clips, etc.) contents of the iPod/iPhone do not display on TV. •• Video and photo browsing is not supported, you can only browse the video and photo contents on the iPod/iPhone itself. EN

17 H HDMI CEC (see Easylink) 19 I Internet BD-Live 14 connect 10 online video stores 17 software update 24 iPod play 19 slideshow 19 L language audio 15, 23 disc menu 23 on-screen display 23 subtitle 15, 23 M manual speaker setup 22 media server software set up 16 MP3 play 19 Multiview 23 N Net TV 17 network connect 10 set up 10 software update 24 9 Index 3 360 degree sound 21, 22 3D video 14 A amplifier 25 audio connection 9 language 23 synchronize with video 13 audio input mapping 19, 22 auto calibration 21 automatic speaker setup 21 B BD-Live access 14 set up 10 Bonus View 13 Browse Net TV 17 PC 17 C calibration 21 care 2 change settings 20 chapter 15 connect audio from TV 9, 19 guide 7 network 10 other devices 9 TV 8 wireless module 11 connectors 7 contact us 27 D disc play 13 supported discs 25 disposal of your product 3 DivX character set 15 DLNA 16 Download video 17 English EN

19 play musical slideshow 16 software update 24 version 24 sound auto volume 12 mode 12 surround 12 treble and bass 13 troubleshooting 27 speaker setup 21, 22, 21 subtitle language 15, 23 subtitle shift 15, 23 Surround sound setup 21, 22 system audio control 19 T time search video 15 title 15 troubleshooting 27 TV audio from TV 9, 19 connect 8 U USB play 14 software update 24 V video online video stores 17 OPTIONS 15 rent and watch a video 17 synchronize with audio 13 W wireless wireless module 11 O one-touch play 19, 22 one-touch standby 19, 22 online video stores 17 overview connectors 7 main unit 4 remote control 4 P password (PIN code) 23 picture OPTIONS 15 rotate 15 slide show 16, 15 troubleshooting 27 picture-in-picture 2nd audio language 13 2nd subtitle language 13 enable 13 play 2D video 14 3D video 14 disc 13 from PC 16 MP3 player 19 multimedia content 16 OPTIONS 13 radio 18 troubleshooting 27 USB storage device 14 product care 2 product specifications 25 R radio play 18 program 18 tune 18 recycle 3 region code 25 remote control 4 rent video 17, 18 repeat 15, 13 rotate pictures 15 S safety 2 SD card 17 settings EasyLink 22 EN

9072 Chuang; Zhuang 9065 Church Slavic; Slavonic 6785 Chuvash 6786 Corsican 6779 Česky 6783 Dansk 6865 Deutsch 6869 Dzongkha 6890 English 6978 Esperanto 6979 Estonian 6984 Euskara 6985  6976 Faroese 7079 Français 7082 Frysk 7089 Fijian 7074 Gaelic; Scottish Gaelic 7168 Gallegan 7176 Georgian 7565 Gikuyu; Kikuyu 7573 Guarani 7178 Gujarati 7185 Hausa 7265 Herero 7290 Hindi 7273 Hiri Motu 7279 Hrwatski 6779 Ido 7379 Interlingua (International)7365 Interlingue 7365 Inuktitut 7385 Inupiaq 7375 Irish 7165 Íslenska 7383 Italiano 7384 Ivrit 7269 Japanese 7465 Javanese 7486 Kalaallisut 7576 Kannada 7578 Kashmiri 7583 Kazakh 7575 Kernewek 7587 Khmer 7577 Kinyarwanda 8287 Kirghiz 7589 Komi 7586 Korean 7579 Kuanyama; Kwanyama 7574 Kurdish 7585 Lao 7679 Latina 7665 Latvian 7686 Letzeburgesch; 7666 Limburgan; Limburger 7673 Lingala 7678 Lithuanian 7684 Luxembourgish; 7666 Macedonian 7775 Malagasy 7771 Magyar 7285 Malayalam 7776 Maltese 7784 Manx 7186 Maori 7773 Marathi 7782 Marshallese 7772 Moldavian 7779 Mongolian 7778 Nauru 7865 Navaho; Navajo 7886 Ndebele, North 7868 Ndebele, South 7882 Ndonga 7871 Nederlands 7876 Nepali 7869 Norsk 7879 Northern Sami 8369 North Ndebele 7868 Norwegian Nynorsk; 7878 Occitan; Provencal 7967 Old Bulgarian; Old Slavonic 6785 Oriya 7982 Oromo 7977 Ossetian; Ossetic 7983 Pali 8073 Panjabi 8065 Persian 7065 Polski 8076 Português 8084 Pushto 8083 Russian 8285 Quechua 8185 Raeto-Romance 8277 Romanian 8279 Rundi 8278 Samoan 8377 Sango 8371 Sanskrit 8365 Sardinian 8367 Serbian 8382 Shona 8378 Shqip 8381 Sindhi 8368 Sinhalese 8373 Slovensky 8373 Slovenian 8376 Somali 8379 Sotho; Southern 8384 South Ndebele 7882 Sundanese 8385 Suomi 7073 Swahili 8387 Swati 8383 Svenska 8386 Tagalog 8476 Tahitian 8489 Tajik 8471 Tamil 8465 Tatar 8484 Telugu 8469 Thai 8472 Tibetan 6679 Tigrinya 8473 Tonga (Tonga Islands) 8479 Tsonga 8483 Tswana 8478 Türkçe 8482 Turkmen 8475 Twi 8487 Uighur 8571 Ukrainian 8575 Urdu 8582 Uzbek 8590 Vietnamese 8673 Volapuk 8679 Walloon 8765 Welsh 6789 Wolof 8779 Xhosa 8872 Yiddish 8973 Yoruba 8979 Zulu 9085 中文 Language Code 1_HTS5220_12_EN-US.indd Sec2:33 4/14/2010 10:24:07 AM

All rights reserved. sgptt_1138/12_v4 book1 back page.indd 4 book1 back page.indd 4 12/29/2010 3:28:13 PM 12/29/2010 3:28:13 PM