Philips DVDR5350H/05 Quick Start Manual

HDD or an empty DVD recordable disc. 1 2 2.5 3 4 6 8 DVD±R/ DVD±RW HDD (160 GB) 31 62 78 94 125 157 250 DVD+R Double Layer 2 4 5 6 8 12 16 Start playback From the hard disk 1 Press HDD-BROWSER , then press RIGHT until you see the { TITLES } and { INFO } menus. 2 Press UP or DOWN to select a title. 3 Press PLAY to start playback. Search TV programmes 1 Press UP until you highlight the menu bar (‘Grid’, ‘Search’, ‘My TV’, etc.) 2 Highlight { Search } and press DOWN . 3 Press RIGHT or LEFT to select a search category and press DOWN . 4 Press DOWN to select a sub-category and press to start the search. 5 Select a programme and press to start viewing. Note If ‘No programme found’ appears, that means there are no programmes of that category for that day. Using the GUIDE Plus+ system Make sure that the TV listing data download is completed. Record TV programmes 1 Press GUIDE . 2 Press DOWN to select a TV channel. Note Press the YELLOW to see an overview of all the available channels and choose from there. 3 Press RIGHT or LEFT to select a TV programme. Note Press DAY- or DAY+ to go directly to a day before or the next day TV listings. 4 Press the RED button to set the highlighted programme for recording. Note You can store up to 25 programmes for recording. Watch TV - Pause live TV Your Philips Recorder allows you to control the TV programme. You can PAUSE it as if you were in control of the live broadcast. 1 Turn on your recorder and press CHANNEL +/- to select a TV programme. 2 Press PAUSE to suspend it. 3 Press PLAY to continue. Note When the recorder is turned on, the programme you are watching will be stored in the temporary hard disk storage. When you switch the recorder to another input signal (e.g. CAM) or to standby mode, the programme will be erased. 4 Press TUNER to return to the live broadcast. Record to hard disk Current TV programme 1 Press REC to start recording. It can record up to 6 hours. Note To set the recording time, press REC repeatedly to extend the recording time in 30 minutes increments for up to 6 hours. If the GUIDE Plus+ system is available, ‘Record 1 program’ is displayed and the current programme will be recorded. 2 Press STOP to stop the recording immediately. Contents in the temporary HDD storage 1 Press INFO to see what is temporarily stored in the hard disk storage. 2 Press UP or DOWN to choose the title you want to record. 3 Press REC to record the title. Note The title will be marked in red and the recording will only take effect when you turn off the recorder. From a disc 1 Hold down the STOP until the disc tray opens, load in a disc and close the disc tray. 2 If the content menu appears, press RIGHT until you see the { TITLES }, { TRACKS } or { PHOTO ROLLS } menu, depending on the disc type. 3 Press UP or DOWN to select a title. 4 Press PLAY to start playback. Need help? GUIDE Plus+ system Go to www.europe.guideplus.com User Manual See the user manual that came with your Philips Recorder Online Go to www.philips.com/support 2005 © Koninklijke Philips N.V. All rights reserved. 12 NC 31 39 246 17781 www.philips.com Quick Start Guide DVDR 535 HDD & DVD Player / Recorder RF coaxial cable Scart cable G-LINK cable & transmitter Power cable Quick start g Remote control and 2 batteries User manu DVD recorder/hard disk What’s in the Box SOURCES 1/3 Hard Disk Disc Tray Disc Library Video Audio Photo CONTENT [BROWSER] DAY- GUIDE DAY+ BACK

or cable box Setup External Receiver 1 Has the External Receiver 1 changed to Programme Number 101? Television (rear) Philips Recorder (rear) Television (rear) Philips Recorder (rear) p VCR or similar device (rear) Positioning of G-LINK transmitter set-top box G-LINK transmitter Television (rear) To source GUIDE From an off-air antenna or cable box Basic connection Before connecting Unplug the antenna cable that is currently connected to your TV. Connecting Connection with VCR or similar device Before connecting Your new Philips Recorder replaces the VCR for your recording needs. First, unplug all the connections from your VCR. Connecting 1 Follow step 1 to 4 of 'Basic connection' to connect this recorder before you proceed to step 2 below. 2 Use another scart cable (not supplied) to connect the EXT2 AUX-I/O Scart socket on this recorder to the SCART OUT socket on your VCR. 3 Connect the power cable from the VCR to an AC power outlet. Note In this setup, the VCR cannot record TV programmes. Connection with set-top box Your new Philips Recorder provides a G-LINK transmitter which allows you to control the tuner of the set-top box (satellite receiver, cable TV box) through the GUIDE Plus+ system. You can record the TV programmes that are received through the set-top box. Connecting 1 Follow step 1 to 4 of 'Basic connection' to connect this recorder before you proceed to step 2 below. 2 Connect the supplied G-LINK cable to the G-LINK socket on this recorder. 3 Place the G-LINK transmitter in front of your set-top box in such a way that it can acquire the signal broadcasted by the transmitter. 4 Connect the power cable from the set-top box to an AC power outlet. Finding the viewing channel 1 Press STANDBY-ON on the recorder. The recorder will display ‘IS THE TV ON?’. 2 Switch on the TV. You should see the { EASY SETUP } menu. Note If connected to your VCR, make sure it is turned off before proceeding. 3 If not, press the Channel Down button on your TV's remote control repeatedly (or AV, SELECT button) until you see the menu. This is the correct viewing channel for the recorder. Start basic setup Use the recorder's remote control and follow the on-screen instructions to complete the installation. 1 Select the desired menu language, your country and the TV shape. Note Select { Done } in the menu and press to go to the next screen. 2 Activate automatic channel search. 3 Check the date and time and press . 4 To continue with the GUIDE Plus+ installation, select { Continue } and press . Otherwise, select { Install later } and press . Wait until the recorder has finished initialising the system, then press again. Install the GUIDE Plus+ system 1 Check your language, country and postal code To change, press and follow the on-screen instructions. Install the set-top box If you do not have a set-top box, skip ‘D’ and go to ‘E’. 1 Press DOWN to select ‘External Receiver 1’ and press . 2 Press again to continue. 3 Select the type of reception, service provider and brand name of the connected set-top box Note Press to go to the next screen. Select { None } if none of the entries are applicable. 4 Select the recorder socket through which your set-top box is connected (e.g. 'EXT2' for EXT 2 AUX-I/O socket) and press . 5 Turn on your set-top box and select channel number 02 on the set-top box. 6 Read the instructions on the TV and press . 7 The recorder will now attempt to change the set-top box’s channel through the G-LINK transmitter. If the set-top box has switched to the same programme number as displayed on the TV, select { Yes } in the menu and press Note If not, select { No } and press to try different code. 8 Your set-top box is now installed. Load the TV listing data 1 Press the GREEN button to leave the menu. Note To switch the GUIDE Plus+ system’s host channel manually, go to { Host Channel Setup }. 2 Press GUIDE to exit the GUIDE Plus+ system. Leave the recorder in 'standby' mode and turn 'on' the set-top box overnight to collect the TV listing data, this may take up to 24 hours. Note If you tune to your Host Channel before going to 'standby' mode, this recorder will start immediately to download the TV listings data. 3 Check the { Editor } screen the next day to ensure the source and programme numbers are matching for all channels. 1 Disconnect the antenna cable from your TV and connect it to the ANTENNA socket on this recorder. 2 Use the supplied RF coaxial cable to connect the TV socket on this recorder to the Antenna In socket on your TV. 3 Use the supplied scart cable to connect the EXT1 TO TV-I/O Scart socket on this recorder to the SCART IN socket on your TV. Note See the accompanying user manual for other possible connections (e.g. S-VIDEO, Component Video). 4 Connect the power cable from the recorder to an AC power outlet. Start with the 'Basic connection'. If you have a VCR, follow the instructions for ‘Connection with VCR or similar device’. If you have a set-top box, follow the instructions for ‘Connection with set-top box’.