Philips HTS5120 User Manaul

16 Check software version 16 Update software from a CD-R or USB 16 8 Product speci cations 17 9 Troubleshooting 18 10 Index 20 Contents 1 Notice 2 Copyright 2 Compliance 2 Mains fuse (UK only) 2 Trademarks 2 2 Important 3 Safety 3 Product care 4 Disposal of your old product and batteries 4 3 Your home theater 5 Main unit 5 Remote control 5 4 Connect your home theater 7 Connectors 7 Connect to the TV 7 Connect audio from TV or other devices 8 Connect a Philips Dock for iPod/iPhone 9 5 Use your home theater 10 Before you start 10 Choose your sound 10 Play a disc 10 Play from a USB storage device 11 More play features 12 Play from radio 12 Play audio from TV or other devices 13 Play from an MP3 player 13 Play from an iPod or iPhone 13 Use Philips EasyLink 13 6 Change settings 14 Access the setup menu 14 Change general settings 15 Change audio settings 15 Change video settings 15 Change preference settings 16 English EN

1362 and have the ASTA approval mark. If the fuse is lost, contact your dealer in order to verify the correct type. 3 Refi t the fuse cover. Note To conform with the EMC directive • (2004/108/EC), the mains plug on this product must not be detached from the mains cord. Trademarks DivX ® and DivX Ultra ® are registered trademarks of DivX, Inc. and are used under license. DivX Ultra ® Certifi ed to play DivX ® video with advanced features and premium content. ABOUT DIVX VIDEO: DivX ® is a digital video format created by DivX, Inc. This is an offi cial DivX Certifi ed device that plays DivX video. Visit www.divx.com for more information and software tools to convert your fi les into DivX video. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certifi ed ® device must be registered in order to play DivX Video-on-Demand (VOD) content. To generate the registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com with this code to complete the registration process and learn more about DivX VOD. Manufactured under license from Dolby Laboratories. Dolby, Pro Logic and the double-D symbol are trademarks of Dolby Laboratories. 1 Notice Copyright This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. Copyright in the UK Recording and playback of material may require consent. See Copyright Act 1956 and The Performers Protection Acts 1958 to 1972. Compliance This product is in compliance with the essential requirements and other relevant provisions of Directives 2006/95/EC (Low Voltage), 2004/108/ EC (EMC). Hereby, Philips Consumer Lifestyle, declares that this Home Theater System HTS5120 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Mains fuse (UK only) This product is fi tted with an approved moulded plug. Should it become necessary to replace the mains fuse, this must be replaced with a fuse of the same value as indicated on the plug (example 10A). 1 Remove fuse cover and fuse. EN

use your home theater. If damage is caused by failure to follow instructions, the warranty does not apply. Safety Risk of electric shock or  re! Never expose the product and accessories • to rain or water. Never place liquid containers, such as vases, near the product. If liquids are spilt on or into the product, disconnect it from the power outlet immediately. Contact Philips Consumer Care to have the product checked before use. Never place the product and accessories • near naked fl ames or other heat sources, including direct sunlight. Never insert objects into the ventilation • slots or other openings on the product. Where the mains plug or an appliance • coupler is used as the disconnect device, the disconnect device shall remain readily operable. Disconnect the product from the power • outlet before lightning storms. When you disconnect the power cord, • always pull the plug, never the cable. Risk of short circuit or  re! Before you connect the product to the • power outlet, ensure that the power voltage matches the value printed on the back or bottom of the product. Never connect the product to the power outlet if the voltage is different. Risk of injury or damage to the home theater! For wall-mountable products, use only the • supplied wall mount bracket. Secure the wall mount to a wall that can support the combined weight of the product and the wall mount. Koninklijke Philips Electronics N.V. bears no responsibility for improper wall mounting that results in accident, injury or damage. For speakers with stands, use only the • supplied stands. Secure the stands to the speakers tightly. Place the assembled stands on fl at, level surfaces that can support the combined weight of the speaker and stand. ‘DVD Video’ is a trademark of DVD Format/ Logo Licensing Corporation. HDMI, and HDMI logo and High-Defi nition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC. The USB-IF Logos are trademarks of Universal Serial Bus Implementers Forum, inc. Windows Media and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/ or other countries. Manufactured under licence under U.S. Patent #s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks and DTS Digital Surround and the DTS logos are trademarks of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved. CLASS 1 LASER PRODUCT English EN

and batteries Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/ EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health. Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed with normal household waste. Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health. Never place the product or any objects • on power cords or on other electrical equipment. If the product is transported in • temperatures below 5°C, unpack the product and wait until its temperature matches room temperature before connecting it to the power outlet. Visible and invisible laser radiation when • open. Avoid exposure to beam. Do not touch the disc optical lens inside the • disc compartment. Risk of overheating! Never install this product in a confi ned • space. Always leave a space of at least four inches around the product for ventilation. Ensure curtains or other objects never cover the ventilation slots on the product. Risk of contamination! Do not mix batteries (old and new or • carbon and alkaline, etc.). Remove batteries if they are exhausted or • if the remote control is not to be used for a long time. Batteries contain chemical substances, they • should be disposed of properly. Product care Do not insert any objects other than discs • into the disc compartment. Do not insert warped or cracked discs into • the disc compartment. Remove discs from the disc compartment • if you are not using the product for an extended period of time. Only use microfi ber cloth to clean the • product. EN

Switches the home theater on or to • standby. When EasyLink is enabled, press • and hold for at least three seconds to switch all connected HDMI CEC compliant devices to standby. b OPEN/CLOSE Opens or closes the disc compartment. 22 17 1 3 2 4 5 6 11 13 12 15 14 16 18 19 7 8 10 9 20 21 23 3 Your home theater Congratulations on your purchase, and welcome to Philips! To fully benefi t from the support that Philips offers, register your home theater at www. philips.com/welcome. Main unit a Disc compartment b ( Open/Close ) Opens or closes the disc compartment. c ( Play/Pause ) Starts, pauses or resumes disc play. d SOURCE Selects an audio/video source for the home theater. e ( Standby-On ) Switches the home theater on or to standby. f +/- ( Volume ) Increases or decreases volume. g Display panel English EN

Selects video resolution of HDMI • output from the home theater. Displays options for different camera • angles. q SUBTITLE Selects subtitle language for video. r SURROUND Selects Dolby Virtual Speaker surround sound. s +/- Increases or decreases volume. t ( Mute ) Mutes or restores volume. u / ( Previous/Next ) Skips to the previous or next track, chapter or fi le. v BACK Returns to a previous menu screen. w OK Confi rms an entry or selection. c Audio Source • DISC: Switches to disc source. • USB: Switches to USB storage device. • RADIO: Switches to FM radio. • AUDIO SOURCE: Selects an audio input source. • DOCK for iPod: Switches to Philips Dock for iPod/iPhone. d SETUP Accesses or exits the setup menu. e ( Navigation buttons ) Navigate menus. • In video mode, press left or right to • fast backward or fast forward. In radio mode, press left or right to • search a radio station; press up or down to fi ne tune a radio frequency. f ( Fast Backward ) ( Fast Forward ) Fast backwards or fast forwards. Press repeatedly to change the search speed. g INFO Displays information about what is playing. h ( Play/Pause ) Starts, pauses or resumes disc play. i ( Stop ) Stops disc play. • In radio mode, erases the current • preset radio station. j TREBLE / BASS Changes treble or bass. Use with +/-. k Numeric buttons Selects an item to play. l AUDIO SYNC Selects an audio language or channel. • Press and hold to synchronize audio • with video. Use with +/-. m SOUND MODE Selects a predefi ned sound effect. n REPEAT / PROGRAM Selects a repeat or shuffl e mode. • In radio mode, programs radio stations. • o ZOOM Zooms into a video scene or picture. EN

Connects to the AC-DC adapter. b FM ANTENNA Connects the FM antenna for radio reception. c AUX IN Connects to the analog audio output on the TV or an analog device. d VIDEO OUT Connects to the composite video input on the TV. e COMPONENT VIDEO OUT Connects to the component video input on the TV. f HDMI OUT Connects to the HDMI input on the TV. g COAXIAL IN Connects to the coaxial audio output on the TV or a digital device. h OPTICAL IN Connects to the optical audio output on the TV or a digital device. Connect to the TV Connect your home theater directly to a TV through one of the following connectors (from highest to basic quality video): a HDMI b Component video c Composite video d SCART 4 Connect your home theater This section helps you connect your home theater to a TV and other devices. The basic connections of the home theater with its accessories are provided in the Quick Start. For a comprehensive interactive guide, see www.connectivityguide. philips.com. Note Refer to the type plate at the back or bottom • of the product for identifi cation and supply ratings. Before you make or change any connections, • ensure that all devices are disconnected from the power outlet. Connectors Side connectors a ( USB ) Audio, video or picture input from a USB storage device. b MP3 LINK Audio input from an MP3 player. c DOCK for iPod Connects to a Philips Dock for iPod/iPhone. (sold separately) English EN

composite video (CVBS) Note The composite video cable or connector might • be labeled AV IN, VIDEO IN, COMPOSITE or BASEBAND. Option 4: Connect to the TV through SCART Use the supplied scart adapter. Connect audio from TV or other devices Use your home theater to play audio from the TV or other devices such as a cable box. Choose from the following connectors. Tip Press • AUDIO SOURCE repeatedly to select the audio output of your connection. TV TV Option 1: Connect to the TV through HDMI Note If the HDTV has a DVI connector, connect • using an HDMI/DVI adapter. If the TV supports EasyLink HDMI CEC, • control the home theater and TV with one remote control (see ‘Use Philips EasyLink’ on page 13 ). Option 2: Connect to the TV through YPbPr (component video) Note The component video cable or connector • might be labeled Y Cb Cr or YUV. TV TV Component Video In EN

HDMI cable Note The • HDMI connector on the TV might be labeled HDMI 1 or HDMI ARC. This feature works with Audio Return Channel (ARC) compatible devices only. Connect a Philips Dock for iPod/iPhone Note Philips iPod Dock is sold separately. • You can use the iPod Dock to charge the iPod • while the home theater is in iPod mode. TV DOCK for iPod Option 1: Connect audio through a digital coaxial cable Note The digital coaxial cable or connector might be • labeled COAXIAL DIGITAL OUT or SPDIF OUT. (Cable not supplied) Option 2: Connect audio through a digital optical cable Note The digital optical cable or connector might be • labeled SPDIF OUT or OPTICAL OUT. (Cable not supplied) Option 3: Connect audio through analog audio cables (Cable not supplied) TV TV English EN

Ideal for action movies and rock or pop music. DRAMA / JAZZ Clear mid and high-range. Ideal for drama movies and jazz music. CONCERT / CLASSIC Neutral sound. Ideal for live concerts and classical music. SPORTS Moderate mid-range and surround effects for clear vocals and the atmosphere of a live sport venue. NIGHT Dynamically controlled sound mode suitable for watching movies at night or for non- intrusive background music. Change surround mode DVS (Dolby Virtual Speaker) technology creates a highly compelling 5.1-channel listening experience from as few as two speakers. Select surround sound During play, press SURROUND to switch on or off the surround sound effect. Play a disc The home theater can play a wide variety of discs, including video, audio and mixed media (for example, a CD-R that contains JPEG pictures and MP3 music). 1 Insert a disc into the home theater. 2 Press DISC. The disc plays or the disc main menu » appears. 5 Use your home theater This section helps you use the home theater to play media from a wide range of sources. Before you start Check that you: Make the necessary connections and • complete the setup as described in the Quick Start. Switch the TV to the correct source for the • home theater. Choose your sound This section helps you choose the ideal sound for your video or music. Change treble or bass Change the high frequency (treble) or low frequency (bass) settings of the home theater to suit your video or music. 1 Press TREBLE or BASS. 2 Press +/- within fi ve seconds to increase or decrease treble or bass. Change sound mode Select predefi ned sound modes to suit your video or music. Press SOUND MODE repeatedly to cycle through the available sound modes. EN

Access several useful features while viewing pictures. Button Action / Rotates the picture counter- clockwise or clockwise. / Skips to the previous or next picture. REPEAT Repeats a single fi le in the folder or repeats the entire folder. Shuffl es fi les in a folder. INFO Displays photo albums in a thumbnail overview. Use audio options Access several useful features while audio is played. Button Action REPEAT Repeats a track, the entire disc or shuffl e tracks. Play from a USB storage device The home theater is fi tted with a USB connector that allows you to view pictures, listen to music or watch movies stored on a USB storage device. 1 Connect the USB storage device to the home theater. 2 Press USB. A content browser appears. » 3 Select a fi le, then press OK. 4 Press the playback buttons to control play (see ‘Play a disc’ on page 10 ). Note If the USB storage device does not fi t into the • connector, use a USB extension cable. The home theater does not support digital • cameras that need a computer program to display photos. The USB storage device must be FAT or DOS- • formatted, and Mass Storage Class compliant. 3 Press the following buttons to control play: Button Action Navigation buttons Navigate menus. OK Confi rms an entry or selection. Starts, pauses or resumes play. Stops play. / Skips to the previous or next track, chapter or fi le. / Fast backwards or fast forwards. Press repeatedly to change the search speed.In pause mode, steps backward (DVD only) or forward by one frame. ZOOM Zooms into a video scene or picture. Use video options Access several useful features while viewing video. Available video options depend on the video source. Button Action / Searches slow-backward or slow-forward. Press repeatedly to change the search speed. For VCD/SVCD, slow-backward search is not available. AUDIO SYNC Selects an audio language or channel. SUBTITLE Selects subtitle language for video. INFO Displays information about what is playing. REPEAT Repeats a chapter or title. ANGLE Displays options for different camera angles. English EN

Select sections of audio or video for repeat playback. 1 During playback, press INFO. 2 Select [Repeat] > [Repeat AB] in the menu. 3 Press OK to mark the start point. 4 Press OK again to mark the end point. Repeat play starts. » To cancel repeat A-B, press • INFO, select [Repeat] > [Off], then press OK. Note Repeat play is only possible within a track/ • chapter. Play from radio 1 Check that the FM antenna is connected. 2 Press RADIO. “ » AUTO INSTALL...PRESS PLAY’ appears on the display panel if you have not installed any radio stations. Press . 3 Press the following buttons to control play: Button Action / Selects a preset radio station. / Searches for a radio station. Fine tunes a radio frequency. Press and hold to erase the preset radio station. PROGRAM Manual: Press once to access program mode, press / to assign a number to the radio station, then press again to store the radio station. Automatic: Press and hold for three seconds to reinstall radio stations. More play features Several advanced features are available for video or picture playback from a disc or USB storage device. Play a musical slideshow Play music and pictures simultaneously to create a musical slideshow. The fi les must be stored on the same disc or USB storage device. 1 Select a music track, then press OK. 2 Press BACK and go to the picture folder. 3 Select a picture, then press OK to start slideshow. 4 Press to stop slideshow. 5 Press again to stop music. Synchronize audio with video If the audio and video are not synchronized, you can delay the audio to match the video. 1 Press and hold AUDIO SYNC until the audio sync message appears on the display panel. 2 Press +/- within fi ve seconds to sync the audio with your video. Quick skip play to a speci c time Quick skip to a specifi c part of a video by entering the time of a scene. 1 During video play, press INFO. 2 Press the Navigation buttons and OK to select: • [TT Time] : Title time. • [Ch Time] : Chapter time. • [Disc Time] : Disc time. • [Track Time] : Track time. 3 Enter the time of the scene, then press OK. EN

Connect a video cable from the • docking station to the TV. For iPod, check that the TV ON setting • on the player is enabled. For iPhone, select the TV Out options • on the player. 4 Press DOCK for iPod. The home theater tests the compatibility » of the player. The time it takes depends on the model. 5 Use the controls on the player to select and play content. Use Philips EasyLink The home theater supports Philips EasyLink, which uses the HDMI CEC (Consumer Electronics Control) protocol. EasyLink- compliant devices that are connected through HDMI connectors can be controlled by a single remote control. Note Philips does not guarantee 100% • interoperability with all HDMI CEC devices. 1 Switch on the HDMI CEC operations on the TV and other connected devices. See the manual of the TV or other devices for details. 2 Press SETUP. 3 Select [General Setup], then press OK. 4 Select [EasyLink Setup], then press OK. Note The home theater can store up to 40 radio • stations. Press • to stop the installation. AM and digital radio are not supported. • If no stereo signal is detected, or if fewer than • fi ve stations are found, you are prompted to install the radio stations again. For the best reception, place the antenna away • from the TV or other sources of radiation. Play audio from TV or other devices Press AUDIO SOURCE repeatedly to select the audio output of the connected device (see ‘Connect audio from TV or other devices’ on page 8). Play from an MP3 player Connect and play audio fi les from an MP3 player or other external audio devices. 1 Connect the MP3 player to the home theater. 2 Press AUDIO SOURCE repeatedly until ‘MP3 LINK’ appears on the display panel. 3 Press the buttons on the MP3 player to select and play audio fi les. Play from an iPod or iPhone By connecting and installing a Philips Dock for iPod/ iPhone, you can use the home theater to play music, movies and pictures from your iPod or iPhone. Note Philips Dock for iPod/iPhone is sold separately. • You can use the Dock for iPod/iPhone to • charge the iPod or iPhone while the home theater is in iPod mode. 1 Connect the Philips Dock for iPod/iPhone to the home theater. 2 Switch on and dock the iPod or iPhone. English EN

your home theater. Caution Many of the settings are already confi gured • with the best value for the home theater. Unless you have a specifi c reason to change a setting, it is best to leave it at the default value. Access the setup menu 1 Press SETUP. The following menu appears. » Symbol Description [General Setup] [Audio Setup] [Video Setup] [Preference Setup] 2 Select a setup menu, then press OK. See the following sections for information about how to change the settings of your home theater. 3 Press BACK to return to the previous menu, or press SETUP to exit. Note You cannot change a setting that is grayed out. • 5 Select and adjust the following settings: • [EasyLink] : Enables or disables EasyLink. • [One Touch Play] : Enables or disables One Touch Play. If enabled, you can use the remote control to start disc play in the home theater and the TV switches automatically to the correct channel. • [One Touch Standby] : Enables or disables One Touch Standby. If enabled, the home theater can be switched off to standby by a remote control from the TV or other connected HDMI CEC devices. • [System Audio Control] :Enables or disables System audio control. If enabled, follow the instructions on the TV to map the connected devices correctly to the audio connectors of the home theater. The home theater switches automatically to the audio source of the connected device. • [Audio Input Mapping] : Updates audio input mapping if there are new devices connected. 6 Press OK to confi rm your choice. Note The connected devices must be connected • through HDMI and switched on. EN

1 Press SETUP. 2 Select [Video Setup], then press OK. 3 Select and adjust the following settings: • [TV System] : Selects a TV system that is compatible with the TV. • [TV Display] : Selects a picture display format to fi t the TV screen. • [Picture Settings] : Selects a predefi ned color setting. • [HDMI Setup] : Selects HDMI video resolution and the wide screen display format for the TV. The Wide Screen Display option is only available for 16:9 wide screen TV display setting. • [Progressive] : Enables or disables progressive scan mode. 4 Press OK to confi rm your choice. Note The best setting is automatically selected for • the TV. If you need to change the setting, ensure that the TV supports the new setting. Some video settings depend on the video • source, ensure that the disc and the TV support the setting or feature. For settings related to HDMI, the TV must be • connected through HDMI. For settings related to progressive scan • mode, the TV must be connected through Component Video. Change general settings 1 Press SETUP. 2 Select [General Setup], then press OK. 3 Select and adjust the following settings: • [EasyLink Setup] : Sets up EasyLink to enjoy easy controls of all the HDMI CEC compliant devices using a single remote control (see ‘Use Philips EasyLink’ on page 13 ). • [Disc Lock] : Restricts play to disc. Password (PIN code) is required to unlock the disc before play. • [Display Dim] : Changes the brightness of the display panel. • [OSD Language] : Selects the on- screen display menu language. • [Screen Saver] : Enables or disables screen saver mode. If enabled, the screen enters idle mode after 10 minutes of inactivity (for example, in pause or stop mode). • [Sleep Timer] : Sets a sleep timer to switch the home theater to standby after a specifi c time. • [DivX® VOD Code] : Displays the DivX VOD registration code for the home theater. 4 Press OK to confi rm your choice. Note Before you purchase DivX videos and play • them on the home theater, register the home theater on www.divx.com using the DivX VOD code. Change audio settings 1 Press SETUP. 2 Select [Audio Setup], then press OK. 3 Select and adjust the following setting: [HDMI Audio] : Enables or disables HDMI audio output for the TV.For settings related to HDMI, the TV must be connected through HDMI. 4 Press OK to confi rm your choice. English EN

software version of your home theater with the latest software version (if available) on the Philips web site. Check software version 1 Press SETUP. 2 Select [Preference Setup] > [Version Info.], then press OK. The software version is displayed. » Update software from a CD-R or USB 1 Check for the latest software version on www.philips.com/support. Search for your model and click on • ‘software&drivers’. 2 Download the software onto a CD-R or USB storage device. 3 Insert the CD-R or connect the USB storage device to the home theater. 4 Follow the instructions on the TV to confi rm the update. When the update is complete, the home » theater automatically switches to standby. 5 Disconnect the power cord for a few seconds and then reconnect it. Caution Do not turn off the power or remove the • CD-R or USB storage device when the software update is in progress because you might damage the home theater. Change preference settings 1 Press SETUP. 2 Select [Preference Setup], then press OK. 3 Select and adjust the following settings: • [Audio] : Selects audio language for video. • [Subtitle] : Selects subtitle language for video. • [Disc Menu] : Selects menu language for video disc. • [Parental] : Restricts access to discs that are recorded with ratings. To play all discs irrespective of the rating, select level ‘8’. • [PBC] : Displays or skips the content menu for VCD and SVCD discs. • [MP3/JPEG Display] : Displays the MP3/JPEG folders or all the fi les. • [Password] : Sets or changes a PIN code to play a restricted disc. Enter ‘0000’ if you do not have a PIN or if you have forgotten your PIN. • [DivX Subtitle] : Selects a character set that supports the DivX subtitle. • [Version Info.] : Displays the software version for the home theater. • [Default] : Resets the home theater to the default settings programmed at the factory. 4 Press OK to confi rm your choice. Note If you select a language that is not available • on a disc, the home theater uses the default language of the disc. You cannot reset disc lock, password (PIN • code) and parental control settings to their default values. EN

• Component video output: 480i/576i, • 480p/576p, 720p, 1080i HDMI output 480p, 576p, 720p, 1080i, • 1080p Audio S/PDIF Digital audio input: • Coaxial: IEC 60958-3 • Optical: TOSLINK • Sampling frequency: • MP3: 32 kHz, 44.1 kHz, 48 kHz • WMA: 44.1 kHz, 48 kHz • Constant bit rate: • MP3: 112 kbps - 320 kbps • WMA: 48 kbps - 192 kbps • Radio Tuning range: FM 87.5-108 MHz (50 kHz) • Signal-to-noise ratio: FM 50 dB • Frequency response: FM 180 Hz-10 kHz / • ±6dB USB Compatibility: Hi-Speed USB (2.0) • Class support: UMS (USB Mass Storage • Class) File system: FAT12, FAT16, FAT32 • Maximum memory support: < 160GB. • Main Unit Power supply: 100-240 V; 50-60 Hz • Power consumption: 35 W • Standby power consumption: < 1 W • Impedance: 8 ohm woofer, 8 ohm tweeter • Speaker drivers: 3” woofer, 1.5” tweeter • Frequency response: 150 Hz ~ 20 kHz • Dimensions (WxHxD): 790.6 x 145 x 57.4 • (mm) Weight: 2.23 kg • Subwoofer Power supply: 220-240 V; ~50 Hz • Power consumption: 45 W • Standby power consumption: < 1 W • System: Bass Refl ex System • Impedance: 8 ohm • Speaker driver: 6” woofer • Frequency response: 35 Hz ~ 200 Hz • Dimensions (WxHxD): 182 x 365 x 306 • (mm) Weight: 6 kg • 8 Product specifications Note Specifi cation and design are subject to change • without notice. Region code Playback media DVD-Video, DVD+R/+RW, DVD-R/-RW, DVD+R DL, CD-R/CD-RW, Audio CD, Video CD/SVCD, Picture CD, MP3-CD, WMA-CD, DivX-CD, USB storage device File Format Audio: .mp3, .wma • Video: .avi, .divx, .wmv • Picture: .jpg • Ampli er Total output power: 400 W RMS • Frequency response: 20 Hz-20 kHz / ±3dB • Signal-to-noise ratio: > 65 dB (CCIR) / • (A-weighted) Input sensitivity: • AUX: 2 V • MP3 LINK: 1 V • Country DVD Europe, United Kingdom Latin America Australia, New Zealand Russia, India China Asia Pacific, Taiwan, Korea English EN

• casing of the product. To keep the warranty valid, never try to repair the product yourself. If you have problems using this product, check the following points before you request service. If you still have a problem, register your product and get support at www.philips.com/welcome. If you contact Philips, you will be asked for the model and serial number of your product. The model number and serial number are on the back or bottom of your product. Write the numbers here: Model No. __________________________ Serial No. ___________________________ Main unit The buttons on this home theater do not work. Disconnect the home theater from the • power outlet for a few minutes, then reconnect. Picture No picture. Ensure that the TV is switched to the • correct source for the home theater. No picture on HDMI connection. Check if the HDMI cable is faulty. Replace • with a new HDMI cable. If this happens when you change the HDMI • video resolution, press HDMI repeatedly until picture appears. Wall Mount Dimensions (WxHxD): 440 x 60 x 23 (mm) • Weight: 0.54 kg • Laser speci cation Type: Semiconductor laser GaAIAs (CD) • Wave length: 645 - 665 nm (DVD), 770 - • 800 nm (CD) Output power: 6 mW (DVD), 7 mW • (VCD/CD) Beam divergence: 60 degrees. • EN

Clean the disc. • Ensure that the home theater supports the • disc (see ‘Product specifi cations’ on page 17 ). Ensure that the home theater supports the • region code of the disc. For DVD±RW or DVD±R, ensure that the • disc is fi nalized. DivX video  les cannot be played. Ensure that the DivX fi le is encoded • according to the ‘Home Theater Profi le’ with the DivX encoder. Ensure that the DivX video fi le is complete. • DivX subtitles do not display correctly. Ensure that the subtitle fi le name is the • same as the movie fi le name. Select the correct character set: 1) Press • SETUP. 2) Select [Preference Setup]. 3) Select [DivX Subtitle]. 4) Select a supported character set. 5) Press OK. The contents of a USB storage device cannot be read. Ensure that the format of the USB storage • device is compatible with the home theater (see ‘Product specifi cations’ on page 17 ). Ensure that the USB storage device • is formatted with a fi le system that is supported by the home theater (note that NTFS is not supported). ‘No entry’ or ‘x’ sign appears on the TV. The operation is not possible. • EasyLink feature does not work. Ensure that the home theater is connected • to a Philips brand EasyLink TV and that EasyLink is on . I do not want my home theater to be switched on when I switch on my TV. This is the correct behavior for Philips • EasyLink (HDMI-CEC). To make the home theater work independently, switch off EasyLink . Sound No sound from subwoofer 1 In Standby, press and hold ( Stop) on the remote control until [PAIRING] fl ashes on the main unit. 2 Press and hold PAIR on the subwoofer until the blue and green indicators on the subwoofer fl ash alternately. 3 If the wireless connection succeeds, [PAIR OK] is displayed and the green indicator on the subwoofer lights up. If the wireless connection fails, • [PAIR FAIL] is displayed, and the blue and green indicators on the subwoofer remain lit. Check whether there is any interference from nearby electronic devices. Remove the confl ict or strong interference, then repeat the above procedures. No sound. Ensure that the audio cables are connected • and select the correct input source (for example, AUDIO SOURCE, USB) for the device you want to play. No sound on HDMI connection. You might not hear any sound if the • connected device is not HDCP (High- bandwidth Digital Content Protection) compliant or only DVI compatible. Use an analog or digital audio connection. Ensure that the • [HDMI Audio] is enabled . No sound from TV program. Connect an audio cable from the audio • input on the home theater to the audio output on the TV, then press AUDIO SOURCE repeatedly to select the correct audio source. Distorted sound or echo. Ensure that the TV volume is muted or set • to minimum if you are playing audio through the home theater. Audio and video are not synchronized. 1) Press and hold • AUDIO SYNC. 2) Press +/- within fi ve seconds. English EN

thumbnail overview 11 troubleshooting 18 play disc 10 MP3 player 13 options 10 radio 12 troubleshooting 19 USB storage device 11 product care 4 product speci cations 17 R radio play 12 program 12 tune 12 recycle 4 region code 17 remote control 5 repeat 10 , 12 rotate pictures 11 10 Index A ampli er 17 audio connection 8 language 16 synchronize with video 12 audio input mapping 13 C care 4 change settings 14 connect audio from TV 8, 13 guide 7 other devices 8 TV 7 connectors 7 contact us 18 D disc play 10 supported discs 17 disposal of your product 4 DivX registration code 15 subtitle 16 E EasyLink settings 13 F  le formats 17 H HDMI CEC (see Easylink) 13 I iPod connect 9 play 13 EN

16 software update 16 version 16 sound mode 10 treble and bass 10 troubleshooting 19 system audio control 13 T time search video 12 troubleshooting 18 TV audio from TV 8, 13 connect 7 U USB play 11 software update 16 V video synchronize with audio 12 video on demand (VOD) 15 English EN