Hitachi DH24PB3 Handling Instructions Manual

This rotary hammer can be set to rotation only mode by pressing the push button and turning the change lever to the mark (Fig. 9 or Fig. 10). To drill wood or metal material using the drill chuck and chuck adapter (optional accessories), proceed as follows. Installing drill chuck and chuck adapter (Fig. 11). (1) Attach the drill chuck to the chuck adapter. (2) The part of the SDS-plus shank is the same as the drill bit. Therefore, refer to the item of “Mounting the drill bit” for attaching it. CAUTION  Application of force more than necessary will not only exp ...

SDS-plus Drill bit Outer dia. Overall length Effective length 4.0 mm 110 mm 50 mm 5.0 mm 110 mm 50 mm 160 mm 100 mm 5.5 mm 110 mm 50 mm 6.5 mm 160 mm 100 mm 7.0 mm 160 mm 100 mm 8.0 mm 160 mm 100 mm 8.5 mm 160 mm 100 mm 9.0 mm 160 mm 100 mm 12.0 mm 166 mm 100 mm 260 mm 200 mm 12.7 mm 166 mm 100 mm 14.0 mm 166 mm 100 mm 15.0 mm 166 mm 100 mm 16.0 mm 166 mm 100 mm 260 mm 200 mm 17.0 mm 166 mm 100 mm 19.0 mm 260 mm 200 mm 20.0 mm 250 mm 200 mm 22.0 mm 250 mm 200 mm 25.0 mm 450 mm 400 mm 30.0 mm 450 mm 400 mm Drill bit (slender shaft) Outer dia. Overa ...

Rotación y función de golpeteo  Perforación de orificios de anclaje  Perforación de orificios de hormigón  Perforación de orificios de baldosa Rotación solamente  Perforación de orificios en hormigón o madera (con accesorios facultativos)  Apretar tornillos en metal o madera (con accesorios facultativos) 〈DH24PC3 solamente〉 Función de golpeteo solamente  Cincelado ligero de hormigón, formación de ranuras y ajuste preciso del ancho. ANTES DE LA PUESTA EN MARCHA 1. Alimentación Asegurarse de que la alimentación de red que ...