StarTech.com SP123DP Instruction Manual

FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com Manual Revision: 10/27/2011 For the most up-to-date information, please visit: www.startech.com Packaging Contents • 1 x DisplayPort Multi Monitor Adapter • 1 x Power Adapter • 1 x Instruction Manual System Requirements • DisplayPort enabled computer system/video card • DisplayPort enabled monitor/display device • Available AC electrical outlet • DisplayPort cables (male/male) SP123DP Triple Head DisplayPort Multi Monitor Adapter *actual product may vary from photos Installation 1. Make sure the computer system and monitors/display devices are powered off. 2. Using a standard DisplayPort cable, connect the Multi-Monitor Adapter to the DisplayPort connector on the Host computer system. 3. Connect the DisplayPort monitor/display device(s) into the numbered connectors on the Multi-Monitor Adapter. Make sure to connect the monitor/display device(s) in order from 1 to 3 (do not skip ports). 4. Connect the included power adapter to the Multi-Monitor Adapter. 5. Power on the monitor/display device(s). 6. Turn on the Host computer system. 7. The operating system will automatically detect the Multi-Monitor Adapter and either clone/mirror a single image on all displays, or span an image across all displays. 8. To change the display setting/mode, change the display resolution via the operating system’s display properties. To use Clone Mode, set the display resolution to equal or less than the maximum resolution of the smallest connected display. Set the display resolution higher, to use Span Mode. The SP123DP Triple Head (DisplayPort) Graphics Expansion Module is an external multi-monitor spanner/splitter that lets you add up to 3 displays to a desktop or laptop PC, from a single DisplayPort output. Output a single-mode DisplayPort signal to span across 3 monitors as a single panoramic display at resolutions up to 3840x1200 or clone (mirror) your primary display, using this device as a 3-port DisplayPort video splitter. Front View Rear View DisplayPort connector (input) DC Power connector DisplayPort connector (output)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection agains harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio o television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that al trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders. Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and acces our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty Information This product is backed by a two year warranty. In addition, StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned for repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from misuse, abuse, alteration, or normal wear and tear. Limitation of Liability In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidenta consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you. Specifications Video Signal DisplayPort 1.1a Number of Ports 3 External Connectors 4 x DisplayPort female 1 x DC Power LEDs 1 x Power Maximum Display Resolution One Display: 1920x1200 Two Displays: 3840x1200 Three Displays: 3840x1024 HDCP Compliant Yes Enclosure Material Metal Power Adapter 5V DC, 2000mA, center positive, type N plug Operating Temperature 0°C ~ 40°C (32°F ~ 104°F) Storage Temperature -20°C ~ 60°C (-4°F ~ 140°F) Humidity 0% ~ 90% RH Dimensions (LxWxH) 131.0mm x 65.0mm x 26.0mm Weight 270g *This product is for use with listed computers or ITE equipment. Supported Video Resolutions Two Monitors Three Monitors Computer Setting Each Monitor Computer Setting Each Monitor 3840 x 1200 1920 x 1200 3840 x 800 1280 x 800 2560 x 1024 1280 x 1024 3849 x 1024 1280 x 1024 2048 x 768 1024 x 768 3072 x 768 1024 x 768 3360 x 1050 1680 x 1050 2400 x 600 800 x 600 2880 x 900 1440 x 900 4080 x 768 1360 x 768 1600 x 600 800 x 600 3840 x 720 1280 x 720 1280 x 480 640 x 480 2160 x 480 720 x 480 2800 x 1050 1400 x 1050 3840 x 960 1280 x 960