StarTech.com 110VDSLEXT Instruction Manual
Text of the manual
VDSL Ethernet LAN Extender
10/100 VDSL Ethernet
LAN Extender Kit over Single
Pair Wire
110VDSLEXT
110VDSLEXTGB
110VDSLEXTEU
Instruction Manual
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide rea-
sonable protection against harmful interference in a residential installation. This equip-
ment generates, uses and can radiate radio frequency energy and, if
Table of Contents
Introduction ..................................................................... 1
Package Contents........................................................................1
Installation........................................................................ 1
Hardware Installation.........................................................
2 x 110VDSLEXT/GB/EU units
•
2 x RJ-45 to VDSL Cable
•
2 x Power Adapter
•
1 x Instruction Manual
•
Installation
Hardware Installation
Install one of the 110VDSLEXT / GB / EU units with all four of the
1.
DIP switches set to the upward (OFF) position. This places the unit
in CO mode.
Install the second 110VDSLEXT / G
LAN LED Display
VDSL LED Display
DIP Switch Settings
The 110VDSLEXT / GB / EU has a 4-position DIP switch for
configuration of Side, Channel, Rate Limit, and SNR.
Pin 1 - CO, CPE Switch
OFF: If Pin 1 is in the OFF position, the
110VDSLEXT / GB / EU will operate in
Central Office (CO) mode.
ON: If Pin 1 is in the ON position, the
110V
