Philips BTM177/12 Quick Start Manual

Step B Step A Enjoy Setup 1 Quick Start Guide What’s in the Box? You should find these items upon opening the box. FM antenna Quick Start Guide Pull out the insulation plastic sheet. 2 User Manual User manual Remote Control BTM177 BTM177_12_QSG_Eng 2/28/08, 13:57 1

For radio reception, connect the supplied FM antenna to the FM ANTENNA terminal. Connect the speaker wires to the SPEAKERS terminals. Connect the power cord of the system to the AC power outlet. In standby mode, press DISPLAY/CLOCK. Press ALBUM/PRESET +/- to select the hour. Press DISPLAY/CLOCK to confirm. Repeat steps 4-5 to set minute. 3 29 1 2 2 Press ALBUM/PRESET +/- to select between 12 hour and 24 hour display. Tips: – See the User Manual for how to connect other equipment to this system. – Use the supplied AC power adaptor only! Using any other power connection device may damage your main set! Speaker (right) Speaker (left) FM wire antenna Power adaptor Press DISPLAY/CLOCK again to confirm. 6 BTM177_12_QSG_Eng 2/28/08, 13:57 2

additional functions are described in the accompanied owner's manual. Step B Enjoy Playing a disc 1 2 Select FM source. Press PROG on the remote control for more than two seconds to program all available stations in order of waveband. Pressí/ ëon the set (ALBUM/PRESET +/- on the remote control ) until the desired preset station is displayed Programming and tuning to radio stations 3 Select CD source. Press OPEN/CLOSE on the top of the system to open the CD door. Insert a disc with the printed side facing up and press down on OPEN/CLOSE to close the CD door. PressÉÅto start playback. Press 9 to stop playback. Notes for the remote control: – First, select the source you wish to control by pressing one of the source select keys on the remote control (CDor AUX, for example). – Then select the desired function ( 2;, í, ë for example). BTM177_12_QSG_Eng 2/28/08, 13:57 3

All rights reserved. http://www.philips.com PDCC-JW-0809 Playing a USB mass storage device 1 2 3 4 5 Make sure that your BTM177 is being powered on. Press SOURCE repeatedly (or USB on the remote) to enter USB mode. The LCD display shows USB. Plug a compatible USB mass storage device to BTM177’s USB port marked . If needed, use a suitable USB cable to connect between the device and BTM177’s USB port. The device will automatically power on. PressÉÅon your BTM177 to start playback. Press 9 to stop playback. Tip: Refer to the user manual supplied for the description about compatibility of USB mass storage device, and playability of the files stored on the USB device. Operating a Bluetooth-enabled device via the system 1 2 3 4 5 Place a Bluetooth-enabled device for pairing within 10 meters from the system. Press SOURCE on the top of the system (or BLUETOOTH on the remote control) to select the Bluetooth source. Press and hold PAIRING on the top of the system or the remote control for more than 3 seconds. Set the Bluetooth-enabled device to search for other available Bluetooth devices until it recognizes “PHILIPS BTM177”. Select “PHILIPS BTM177” and wait until you hear a double beep from the system and the Bluetooth icon turns on. ➜Enter “0000” when prompted for a keyword. For a paired HFP and/or HSP mobile phone, you can receive, reject or hold a call via the system with the PAIRING , and 9 buttons respectively. ● For a paired A2DP device, you can enjoy music from it with the ÉÅ, ¡ / ™, S/T and 9 buttons via the system. 6 BTM177_12_QSG_Eng 2/28/08, 13:57 4