Philips DCB293/79 Operation & User’s Manual

7 Introduction 7 What’s in the box 7 Overview of the main unit 8 Overview of the remote control 9 3 Get started 11 Placement 11 Prepare the remote control 11 Connect power 11 Auto install radio stations 12 Set clock 12 Turn on 12 4 Play 13 Play a disc 13 Play from USB 13 Play iPod/iPhone 13 5 Listen to radio 15 Listen to Digital Audio Broadcasts (DAB+) 15 Listen to FM radio 17 6 Play options 18 Pause/resume play 18 Skip to a track 18 Search within a track 18 Select repeat/shuffle play options 18 Program tracks 18 Display time 18 Adjust volume level 18 Mute sound 19 Select a preset sound effect 19 Enhance bass 19 7 Other features 20 Set the alarm timer 20 Set the sleep timer 20 Play from an external device 20 Listen through headphone 20 8 Product information 21 Specifications 21 USB playability information 22 Supported MP3 disc formats 22 Maintenance 22 9 Troubleshooting 23

storms or when unused for long periods of time. m Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. n Battery usage CAUTION – To prevent battery leakage which may result in bodily injury, property damage, or damage to the unit: Install all batteries correctly, + and - • as marked on the unit. Do not mix batteries (old and new • or carbon and alkaline, etc.). Remove batteries when the unit is • not used for a long time. o Apparatus shall not be exposed to dripping or splashing. p Do not place any sources of danger on the apparatus (e.g. liquid filled objects, lighted candles). q Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. Warning Never remove the casing of this apparatus. • Never lubricate any part of this apparatus. • Never place this apparatus on other electrical • equipment. Keep this apparatus away from direct sunlight, • naked flames or heat. Never look into the laser beam inside this • apparatus. Ensure that you always have easy access to the • power cord, plug or adaptor to disconnect this apparatus from the power. 1 Important Safety Important Safety Instructions a Read these instructions. b Keep these instructions. c Heed all warnings. d Follow all instructions. e Do not use this apparatus near water. f Clean only with dry cloth. g Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. h Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. i Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. j Only use attachments/accessories specified by the manufacturer. k Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. EN

device that are not expressly approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment. This product complies with the radio interference requirements of the European Community. Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health. Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed with normal household waste.Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health. Hearing safety Listen at a moderate volume. Using headphones at a high volume can • impair your hearing. This product can produce sounds in decibel ranges that may cause hearing loss for a normal person, even for exposure less than a minute. The higher decibel ranges are offered for those that may have already experienced some hearing loss. Sound can be deceiving. Over time your • hearing ‘comfort level’ adapts to higher volumes of sound. So after prolonged listening, what sounds ‘normal’ can actually be loud and harmful to your hearing. To guard against this, set your volume to a safe level before your hearing adapts and leave it there. To establish a safe volume level: Set your volume control at a low setting. • Slowly increase the sound until you can • hear it comfortably and clearly, without distortion. Listen for reasonable periods of time: Prolonged exposure to sound, even • at normally ‘safe’ levels, can also cause hearing loss. Be sure to use your equipment • reasonably and take appropriate breaks. Be sure to observe the following guidelines when using your headphones. Listen at reasonable volumes for • reasonable periods of time. Be careful not to adjust the volume as • your hearing adapts. Do not turn up the volume so high that • you can’t hear what’s around you. You should use caution or temporarily • discontinue use in potentially hazardous situations. Do not use headphones while operating a motorized vehicle, cycling, skateboarding, etc.; it may create a traffic hazard and is illegal in many areas. English EN

We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.) Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment. The making of unauthorized copies of copy-protected material, including computer programs, files, broadcasts and sound recordings, may be an infringement of copyrights and constitute a criminal offence. This equipment should not be used for such purposes. Windows Media and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries. This apparatus includes this label: Note The type plate is located on the bottom of the • apparatus. EN

Check and identify the contents of your package: Main unit • Remote control • Power adaptor • 1 x MP3 link cable • Mounting kit (2 dowels and 2 screws) • Quick start guide • User manual • Wall mounting instructions • 2 Your Micro Hi- Fi System Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Introduction With this unit, you can enjoy audio from discs, USB devices, iPod players, iPhone and listen to tuner/Digital Audio Broadcasting (DAB) radio stations, or other external devices. The unit offers Digital Sound Control (DSC) and Dynamic Bass Boost (DBB) to enrich sound. The unit supports the following media formats: English EN

• standby mode, or switch to Eco Power standby. i Dock for iPod/iPhone IR Remote control sensor. • j Open/close the disc compartment. • k /MENU Stop play or erase a program. • Access and exit a menu. • l VOLUME + / - Adjust volume. • m /ENTER Start or pause play. • Confirm a selection. • Access the iPod menu. • In FM mode, switch between mono • and stereo signals. Overview of the main unit a Jack for a USB mass storage device. • b MP3 LINK Audio input jack (3.5mm) for an • external audio device. c SOURCE Select a source: CD, iPod, FM/DAB, • USB, or MP3 link. d / Skip to the previous/next track. • Search within a track. • Tune to a radio station. • Adjust hour/minute digits. • Select 12 hour or 24 hour format. • e Display panel Show current status. • f Disc compartment g Eco-power indicator b e f i g h c d a n m j l k EN

• d / Navigate in the iPod/DAB menu. • Skip to the previous/next album. • Skip to the previous/next radio • station. e / Navigate in the iPod/DAB menu. • Skip to the previous/next album. • Skip to the previous/next track. • Search within a track. • Tune to a radio station. • Adjust hour/minute digits. • Select 12 hour or 24 hour format. • f /ENTER Start or pause play. • Confirm a selection. • Access the iPod menu. • In FM mode, switch between mono • and stereo signals. g USB/MP3 LINK Select USB device source. • Select external audio device source. • h RDS/DISPLAY (RDS not available) Display time. • Display DAB information. • Select display information during play. • i Mute or restore volume. • j VOL +/- Adjust volume. • k Numeric keypad Select a track from a disc directly. • Select a preset radio station. • l PROG/CLOCK SET Program tracks. • Program radio stations. • Set the clock. • m SLEEP/TIMER Set the sleep timer. • Set the alarm timer. • n Jack for the headphone. • Overview of the remote control a Turn on the unit, or switch to • standby mode, or switch to Eco Power standby. b OPEN/CLOSE Open or close the disc • compartment. PRESET/ALBUM PROG/ CLOCK SET SLEEP/ TIMER DISPLAY MENU RDS DSC DBB USB TUNER CD VOL MODE/ SCAN 3 4 5 6 7 8 9 1 0 2 DAB OPEN/CLOSE MP3 LINK ENTER b a c e f d g h j i k l m n s r q p o English EN

• o DBB Turn on or off dynamic bass • enhancement. p MODE/SCAN Select repeat/shuffle play mode. • Scan FM/DAB radio stations. • q /MENU Stop play or erase a program. • Access and exit a menu. • r iPod/iPhone Select iPod/iPhone source. • s DAB/TUNER Select DAB/tuner source. • EN

• for a long time, remove the batteries. Do not use old and new or different types of • batteries in combination. Batteries contain chemical substances, so they • should be disposed of properly. Connect power Caution Risk of product damage! Ensure that the power • voltage corresponds to the voltage printed on the back or underside of the apparatus. Risk of electric shock! When you unplug the • AC adaptor, always pull the plug from the socket. Never pull the cord. Before connecting the AC adaptor, ensure you • have completed all other connections. 1 Connect the power adaptor to: the • DC IN jack on the main unit. the wall outlet. • 3 Get started Caution Use of controls or adjustments or • performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the rear of the apparatus. Write the numbers here: Model No. __________________________ Serial No. ___________________________ Placement You can place the unit on a flat surface or mount the unit on a wall. Mount on a wall To wall mount the unit, see the included separate sheet of wall mounting instructions. Prepare the remote control Caution Risk of explosion! Keep batteries away from • heat, sunshine or fire. Never discard batteries in fire. To insert the remote control battery: 1 Open the battery compartment. 2 Insert 2 AAA batteries (not supplied) with correct polarity (+/-) as indicated. 3 Close the battery compartment. English EN

The minute digits are displayed and » begin to blink. 8 Press / to set the minute. 9 Press PROG/CLOCK SET to confirm the clock setting. Turn on 1 Press . The unit switches to the last selected » source. Switch to standby 1 Press again to switch the unit to standby mode. The clock (if set) appears on the » display panel. To switch the unit to Eco Power Standby mode: 1 Press and hold for more than 2 seconds. The backlight on the display panel » turns off. Tip The unit switches to Eco Power Standby mode • after 15 minutes in standby mode. To switch between standby mode and Eco Standby Mode: 1 Press and hold for more than 2 seconds. Auto install radio stations When you connect power and no radio stations are stored, the unit automatically begins to store radio stations. 1 Connect the unit to the power supply. [ » AUTO INSTALL PRESS - PLAY KEY](auto install press - play key) is displayed. 2 Press on the main unit to start installation. The unit automatically stores radio » stations with sufficient signal strength. When all the available radio stations » are stored, the first preset radio station is broadcast automatically. Set clock Note You can set the clock in the standby mode • only. 1 Press and hold PROG/CLOCK SET to enter the clock setting mode. » [SET CLOCK] (set clock) scrolls on the screen. » [Synch On] (synch on) is displayed. 2 Press / to select [Y] or [N]. • [Y]: the unit reads the DAB/RDS time and sets the clock automatically. • [N]: the unit turns off the time synchronization. 3 Press PROG/CLOCK SET to confirm. 4 Press / repeatedly to select 12 hour or 24 hour format. 5 Press PROG/CLOCK SET to confirm. The hour digits are displayed and begin » to blink. 6 Press / to set the hour. EN

this Micro Hi-Fi system. Compatible iPod/iPhone Apple iPod and iPhone models with a 30-pin dock connector: iPod classic, iPod touch, iPod nano, iPod • 5th generation (video), iPod with color display, iPod mini iPhone, iPhone 3G, iPhone 3GS • Play an iPod/iPhone player Note When an iPod/iPhone player is loaded, the unit • switches to iPod source automatically. 1 Push to open the dock compartment. 2 Place the iPod/iPhone player in the dock. 4 Play Play a disc 1 Press CD to select the disc source. 2 Press to open the disc compartment. 3 Insert a disc with the printed side facing outward. 4 Press to close the disc compartment. Play starts automatically. If not, press » . Play from USB Note Ensure that the USB device contains playable • audio content. 1 Insert the USB device into the socket. 2 Press USB to select the USB source. Play starts automatically. If not, press » . To select a folder, press • / . To select an audio file, press • / . English EN

To pause/resume play, press • . To skip to a track, press • / . To search during play, press and • hold / , then release to resume normal play. Charge the iPod/iPhone When the unit is connected to power, the docked iPod/iPhone begins to charge. EN

stations. 5 Press ENTER to confirm. Program DAB+ radio stations manually You can program a maximum of 30 preset DAB+ radio stations. 1 Tune to a DAB+ radio station. 2 Press PRESET +/- to select a preset number. 3 Press and hold PROG/CLOCK SETfor two seconds. The preset number of the saved » station appears. Listen to a preset DAB+ radio station 1 Press SOURCErepeatedly to select [DAB+]. 2 Press PRESET +/- to select a preset number. 3 Press ENTER to confirm. Show DAB+ information 1 Tune to a DAB+ radio station. 2 Press repeatedly to scroll through the following information (if available): Dynamic label segment (DLS) » Program type (PTY) » Ensemble Name » Time » Channel and frequency » Bit rate and audio status » Signal error rate » Use DAB+ menu 1 In the DAB+ mode, press MENU to enter the DAB+ menu. 5 Listen to radio Listen to Digital Audio Broadcasts (DAB+) Digital Audio Broadcasting (DAB+), is a way of broadcasting radio digitally through a network of transmitters. It provides you with more choice, better sound quality and more information. 1 Press SOURCErepeatedly to select [DAB+]. When you enter the DAB+ mode for » the first time, the unit automatically scans DAB+ radio stations. The unit stores all available DAB+ radio stations and then broadcasts the first available station. The last selected DAB+ radio station » broadcasts automatically. Tip If no DAB+ service is available, • [NO DAB STATION] is displayed, and then [Station list] is displayed. Scan DAB+ radio stations automatically You can perform full scan to search for DAB+ radio stations. 1 In DAB+ mode, press MODE/SCAN. The unit scans all available DAB+ » radio stations and broadcasts the first available station. Tune to DAB+ radio station manually 1 Press DAB/TUNER repeatedly to select [DAB+]. 2 Press / to select [Manual Tune]. 3 Press ENTER to confirm. English EN

removes a degree of compensation for the differences in the dynamic range between radio stations. • [DRC off] (DRC is switched off.) • [DRC high] (DRC is switched on; the default setting recommended for noisy environment.) • [DRC low] (DRC is set to half normal level) Prune With this feature, you can clear all the invalid stations from the station list. 1 In the DAB+ mode, press MENU to enter the menu options. 2 Press / repeatedly until [Prune] is displayed. 3 Press ENTER to confirm the selection. » [Y] or [N] is displayed. 4 Press / to switch between [Y] and [N]. 5 Press ENTER to confirm. System With this feature, you can: • know the software version of the unit 1 In the DAB+ mode, press MENU to enter the menu options. 2 Press / repeatedly until [System] is displayed. 3 Press ENTER to confirm. » [SW version] is displayed. 4 Press ENTER again. The software version of the main unit » is displayed. • reset DAB/FM stations 1 In the DAB+ mode, press MENU to enter the menu options. 2 Press / repeatedly until [System] is displayed. 3 Press ENTER to confirm. » [SW version] is displayed. 2 Press / to scroll the menu options: • [Station list] • [Full scan] • [Manual tune] • [DRC] (dynamic range control) • [Prune] • [System] 3 To select an option, press ENTER. 4 Repeat step 2-3 if sub-option is available under one option. Full scan Full scan is used to perform a wide range of DAB+ radio search. 1 In the DAB+ mode, press MENU to enter the menu options. 2 Press / repeatedly until [Full scan] is displayed. 3 Press ENTER to confirm the selection. Full scan starts automatically. » Manual tune With this feature, you can tune to a specific channel/frequency manually. In addition to antenna orientation for better radio reception, the optimal reception can also be obtained with this feature. 1 In the DAB+ mode, press MENU to display the “Manual tune” option. 2 Press ENTER to confirm the selection. The display shows a channel and its » frequency. 3 Press / repeatedly until the desired channel/frequency appears. 4 Press ENTER to confirm the selection. Tip You may press • DISPLAY to change the service information on the display. You may adjust the position of the antenna to • obtain the optimal signal strength. Press • MENU to exit manual tune function. EN

program mode. 3 Press / to allocate a number to this radio station, then press and hold PROG/CLOCK SET to confirm. 4 Repeat the above steps to program other stations. Tip To overwrite a programmed station, store • another station in its place. Select a preset radio station 1 In tuner mode, press / to select a preset number. 2 Press /ENTER to confirm. You can also press the numeric buttons • to select a preset number directly. You can press • /ENTER to switch between mono and stereo signals. Tip Position the antenna as far as possible from • TV, VCR or other radiation source. For optimal reception, fully extend and adjust • the position of the antenna. 4 Press / to switch to [Tuner Reset]. 5 Press ENTER to confirm. 6 Press / to switch between [Y] and [N]. • [Y]: reset all DAB/FM radio stations. • [N]: preset radio stations remain unchanged. 7 Press ENTER to confirm. Listen to FM radio Tune to a radio station 1 Press TUNER to select FM. 2 Press / to tune to a specific frequency. Play starts automatically. » Tip You can press • MODE/SCAN to tune to the next station with strong reception automatically. Program radio stations automatically You can program a maximum of 30 preset radio stations (FM). 1 In the tuner mode, press and hold MODE/SCAN to activate automatic program mode. All available stations are programmed » in the order of waveband reception strength. The first programmed radio station is » broadcast automatically. Program radio stations manually You can program a maximum of 30 preset radio stations (FM). 1 Tune to a radio station. English EN

MODE/SCAN repeatedly until no option is displayed. Program tracks Note You can program tracks only when the play • stops. You can program a maximum of 40 tracks. 1 Press PROG/CLOCK SET to activate the program mode. [ » P] is displayed. 2 For MP3/WMA tracks, press / to select an album. 3 Press / to select a track, then press PROG/CLOCK SET to confirm. 4 Repeat steps 2 to 3 to program more tracks. 5 Press to play the programmed tracks. During play, [ » P] is displayed. To erase the program, in the stop • position, press . Display time 1 Press DISPLAY to display time. Tip In Eco Standby mode, time is displayed for 90 • seconds. Adjust volume level 1 During play, press VOL +/- to increase/ decrease the volume level. 6 Play options Pause/resume play 1 During play, press to pause/resume play. Skip to a track For CD: 1 Press / to select another track. To select a track directly, you can • also press a key on the numerical keypad. For MP3 disc and USB: 1 Press to select an album or a folder. 2 Press / to select a track or a file. Search within a track 1 During play, press and hold / . 2 Release to resume normal play. Select repeat/shuffle play options 1 During play, press MODE/SCAN repeatedly to select a repeat option or the shuffle play mode. • [ ]: the current track is played repeatedly. • [ ]: all tracks in the current album are played repeatedly. • [ ]: all tracks are played repeatedly. • [ ]: all tracks are played randomly. EN

sound. Select a preset sound effect 1 During play, press DSC repeatedly to select: [ • POP] (pop) [ • JAZZ] (jazz) [ • ROCK] (rock) [ • CLASSIC] (classic) [ • FLAT] (flat - all equalizers off) Enhance bass 1 During play, press DBB to turn on or off dynamic bass enhancement. If DBB is activated, [DBB] is displayed. » English EN

1 Press SLEEP/TIMER repeatedly until [OFF] (off) is displayed. When sleep timer is deactivated, » disappears on the display. Play from an external device You can also listen to an external audio device through this unit. 1 Press USB/MP3 LINK to select the MP3 link source. 2 Connect the supplied MP3 link cable to: the • MP3 LINK jack (3.5mm) on the unit. the headphone jack on an external • device. 3 Start to play the device (see the device user manual). Listen through headphone 1 Plug a headphone into the socket on the unit. 7 Other features Set the alarm timer This unit can be used as an alarm clock. The disc/radio/USB/iPod is activated to play at a preset time. Note Ensure that you have set the clock correctly. • 1 Press to switch to standby mode. 2 Press and hold SLEEP/TIMER for more than two seconds. A prompt to select the source is » displayed. 3 Press CD, iPod, TUNER, DAB, or USB to select a source. 4 Press SLEEP/TIMER to confirm. The clock digits are displayed. » The hour digits begin to blink. » 5 Press / to set the hour. 6 Press SLEEP/TIMER to confirm. The minute digits begin to blink. » 7 Press / to set the minute. The timer is set and activated. » » is displayed. Set the sleep timer This unit can switch to standby automatically after a set period of time. 1 When the unit is turned on, press SLEEP/TIMER repeatedly to select a set period of time (in minutes). When sleep timer is activated, » is displayed. EN

108MHz DAB: 174.92 - 239.20 MHz Tuning grid (FM) 50 KHz Sensitivity - Mono, 26dB S/N Ratio - Stereo, 46dB S/N Ratio < 22 dBf > 43 dBf Search Selectivity < 28 dBf Total Harmonic Distortion < 2% Signal to Noise Ratio >55 dB Number of presets 30 (FM) 30 (DAB) Speakers Speaker impedance 2 x 10 W, 4 General information AC power 100 - 240V~, 50/60Hz Operation Power Consumption 15 W Standby Power Consumption < 2 W Eco Power Standby Power Consumption < 1 W USB Direct Version 2.0/1.1 Dimensions - Main Unit (W x H x D) 565 x 245 x 104 mm Weight - Main Unit 2.7 kg 8 Product information Note Product information is subject to change • without prior notice. Specifications Amplifier Total output power 2 x 10 W RMS Frequency response 80 Hz - 16 kHz, ± 3 dB Signal to noise ratio > 60 dB MP3 link input 0.5 V RMS 20 k Disc Laser type Semiconductor Disc diameter 12 cm /8 cm Support disc CD-DA, CD-R, CD- RW, MP3-CD, WMA- CD Audio DAC 24 Bits / 44.1 kHz Total harmonic distortion < 1.5% Frequency response 60 Hz -16 kHz (44.1 kHz) Signal to noise ratio > 55 dBA English EN

• a cleaning cloth. Wipe the disc from the centre out. Do not use solvents such as benzene, • thinner, commercially available cleaners, or antistatic spray intended for analogue records. Clean the disc lens After prolonged use, dirt or dust may • accumulate at the disc lens. To ensure good play quality, clean the disc lens with Philips CD lens cleaner or any commercially available cleaner. Follow the instructions supplied with cleaner. USB playability information Compatible USB devices: USB flash memory (USB 2.0 or USB 1.1) • USB flash players (USB 2.0 or USB 1.1) • memory cards (requires an additional • card reader to work with this unit) Supported formats: USB or memory file format FAT12, • FAT16, FAT32 (sector size: 512 bytes) MP3 bit rate (data rate): 32-320 Kbps and • variable bit rate WMA v9 or earlier • Directory nesting up to a maximum of 8 • levels Number of albums/ folders: maximum 99 • Number of tracks/titles: maximum 999 • ID3 tag v2.0 to v2.3 • File name in Unicode UTF8 (maximum • length: 128 bytes) Supported MP3 disc formats ISO9660, Joliet • Maximum title number: 999 (depending • on file name length) Maximum album number: 99 • Supported sampling frequencies: 32 kHz, • 44.1kHz, 48 kHz Supported Bit-rates: 32-320 (kbps), • variable bit rates ID3 tag v2.0 to v2.3 • Directory nesting up to a maximum of 8 • levels Maintenance Clean the cabinet Use a soft cloth slightly moistened with • a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives. EN

Before pressing any function button, first • select the correct source with the remote control instead of the main unit. Reduce the distance between the remote • control and the unit. Insert the battery with its polarities (+/– • signs) aligned as indicated. Replace the battery. • Aim the remote control directly at the • sensor on the front of the unit. Cannot display some files in USB device The number of folders or files in the USB • device has exceeded a certain limit. This phenomenon is not a malfunction. The formats of these files are not • supported. USB device not supported The USB device is incompatible with the • unit. Try another one. Poor radio reception Increase the distance between the unit • and your TV or VCR. Fully extend the DAB/FM antenna. • Clock/timer setting erased Power has been interrupted or the power • cord has been disconnected. Reset the clock/timer. • Timer does not work Set the clock correctly. • Switch on the timer. • 9 Troubleshooting Warning Never remove the casing of this apparatus. • To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www. philips.com/welcome). When you contact Philips, ensure that the apparatus is nearby and the model number and serial number are available. No power Ensure that the AC power plug of the • unit is connected properly. Ensure that there is power at the AC • outlet. To save power, the unit switches to Eco • Standby mode automatically after 15 minutes in standby mode. No sound Adjust the volume. • No response from the unit Disconnect and reconnect the AC power • plug, then turn on the unit again. No disc detected Insert a disc. • Check if the disc is inserted with the print • side facing inward. Wait until the moisture condensation at • the lens has cleared. Replace or clean the disc. • Use a finalized CD or correct format disc. • English EN

Version 1.3: 1st July 2009 PHILIPS CONSUMER ELECTRONICS WARRANTY POLICY FOR AUSTRALIA Effective 1st July 2009 Philips provides its Consumer Electronics products with a 1 Year Manufacturers Warranty. The benefits given to the purchaser by this warranty are in addition to all other rights and remedies, which the purchaser has in respect of the product under the Trade Practices Act or other Commonwealth or State Law. The conditions contained in this warranty replace and override the provision of the Philips World-Wide Guarantee for products purchased in Australia and used in Australia. Please record the following information for your records and keep in a safe place. It is essential that you retain your original purchase receipt to make a warranty claim. Model number : ……………………………………………………… Serial number : ……………………………………………………… Date of purchase : ……………………………………………………… Retailer : ……………………………………………………… If you require assistance with the operation of the product, its features or specifications, you may call the Philips Technology Care Centre on 1300 363 391 where support is provided by our trained staff. If the product fails within 12 months from the date of purchase, please return the faulty product to the place of purchase. Conditions of Warranty a. All claims for warranty can only be made at the place of purchase and a copy of the purchase receipt is required for any warranty claim. b. The warranty period is valid from the original date of purchase of the product. c. This warranty extends only to defects in material or workmanship occurring under normal use of the product when operated in accordance with the instructions. d. Philips may, at its discretion choose to repair rather than replace this product. e. If a replacement product is supplied, it is warranted for the remainder of the warranty period, from the original date of purchase. f. This Manufacturers Warranty is limited to 3 months for products used in commercial applications. g. Product accessories are covered by the same warranty period. If an accessory is faulty, please contact the Philips Technology Care Centre on 1300 363 391. h. This Manufacturers Warranty is neither transferable nor valid in countries other than Australia. This Warranty does not cover: a. Service costs arising from failure to correctly adjust the controls of the product or to observe the instructions, or inspections that reveal that the product is in normal working order. b. Product failures caused by misuse, neglect, accidental breakage, transit damage, un-authorised repairs or modification by un-authorised persons, external fires, lightning strikes, floods, vermin infestation or liquid spillage. c. Reception problems, replacement of worn or used batteries or other consumables. d. Second hand products or refurbished products. e. Products failure, caused by other products.