Philips DCM276/37 Operation & User’s Manual

Need help fast? Read your Quick Start Guide and/or User Manual first for quick tips that make using your Philips product more enjoyable. If you have read your instructions and still need assistance, you may access our online help at www.philips.com/welcome or call 1-888-PHILIPS (744-5477) while with your product. Philips vous remercie de votre confiance. Besoin d'une aide rapide? Le Guide rapide de début et Manuel de l'utilisateur regorgent d'astuces destinées à simplifier l'utilisation de votre produit Philips. Toutefois, si vous ne parvenez pas à résoudre votre probléme, vous pouvez accéder à notre aide en ligne à l'adresse www.philips.com/welcome ou formez le 1-800-661-6162 (Francophone) 1-888-PHILIPS (744-5477) (English speaking) Veillez à avoir votre produit à portée de main. Gracias por escoger Philips Necesita ayuda inmediata? Lea primero la Guía rápida del comienzo o el Manual del usuario, en donde encontrará consejos que le ayudarán a disfrutar plenamente de su producto Philips. Si después de leerlo aún necesita ayuda, consulte nuestro servicio de asistencia en línea en www.philips.com/welcome o llame al teléfono 1-888-PHILIPS (744-5477) y tenga a mano el producto. (and Model / Serial number) (et model / serial nombre) (y número de model / serial) Register your product and get support at www.philips.com/welcome DCM276 EN User manual ES Manual del usuario FR Mode d’emploi

B limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications.This Class B digital apparatus complies with Canadian ICES-003. Français: Cet appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de Classe B prescrites dans le Règlement sur le Brouillage Radioélectrique édicté par le Ministère des Communications du Canada. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. The set complies with the FCC-Rules, Part 15 and with 21 CFR 1040.10. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. L’appareil est conforme à la réglementation FCC, section 15, et à la norme 21 CFR 1040.10. Son utilisation est soumise à deux conditions : 1. L’appareil ne doit pas provoquer d’interférences nuisibles, et 2. L’appareil doit supporter les interférences reçues, y compris les interférences empêchant son fonctionnement correct.

17 Set the sleep timer 17 Play from an external device 17 8 Adjust sound 18 Adjust volume level 18 Mute sound 18 Select a preset sound effect 18 Enhance bass 18 9 Product information 18 6SHFLÀFDWLRQV 18 USB playability information 19 Supported MP3 disc formats 19 Maintenance 19 10 Troubleshooting 20 Contents 1 Important 6 Safety 6 Notice 8 2 Your Micro Hi-Fi System 8 Introduction 8 What’s in the box 8 Overview of the main unit 9 Overview of the remote control 10 3 Get started 11 Placement 11 Prepare the remote control 11 Connect power 12 Auto install radio stations 12 Set clock 12 Turn on 13 4 Play 13 Play a disc 13 Play from USB 13 Play options 14 5 Play iPod 15 Compatible iPod 15 Play an iPod player 15 Charge the iPod 15 6 Listen to radio 16 Tune to a radio station 16 Program radio stations automatically 16 Program radio stations manually 16 Select a preset radio station 16

Install in accordance with the manufacturer’s instructions. h Do not install near any heat sources such as radiators, heat registers, stoves, RURWKHUDSSDUDWXVLQFOXGLQJDPSOLÀHUV that produce heat. i Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your VDIHW\,IWKHSURYLGHGSOXJGRHVQRWÀW into your outlet, consult an electrician for replacement of the obsolete outlet. j Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. k Only use attachments/accessories VSHFLÀHGE\WKHPDQXIDFWXUHU l Use only with the cart, stand, tripod, bracket, RUWDEOHVSHFLÀHGE\ the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip- over. m Unplug this apparatus during lightning storms or when unused for long periods of time. n 5HIHUDOOVHUYLFLQJWRTXDOLÀHGVHUYLFH personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, 1 Important Safety Know these safety symbols This ‘bolt of lightning’ indicates uninsulated material within your unit may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering. The ‘exclamation point’ calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems. :$51,1*7RUHGXFHWKHULVNRIÀUHRU electric shock, this apparatus should not be H[SRVHGWRUDLQRUPRLVWXUHDQGREMHFWVÀOOHG with liquids, such as vases, should not be placed on this apparatus. CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert. Important Safety Instructions a Read these instructions. b Keep these instructions. c Heed all warnings. d Follow all instructions. e Do not use this apparatus near water. f Clean only with dry cloth. EN

Using headphones at a high volume can ‡ impair your hearing. This product can produce sounds in decibel ranges that may cause hearing loss for a normal person, even for exposure less than a minute. The higher decibel ranges are offered for those that may have already experienced some hearing loss. Sound can be deceiving. Over time your ‡ hearing ‘comfort level’ adapts to higher volumes of sound. So after prolonged listening, what sounds ‘normal’ can actually be loud and harmful to your hearing. To guard against this, set your volume to a safe level before your hearing adapts and leave it there. To establish a safe volume level: Set your volume control at a low setting. ‡ Slowly increase the sound until you can ‡ hear it comfortably and clearly, without distortion. Listen for reasonable periods of time: Prolonged exposure to sound, even ‡ at normally ‘safe’ levels, can also cause hearing loss. Be sure to use your equipment ‡ reasonably and take appropriate breaks. Be sure to observe the following guidelines when using your headphones. Listen at reasonable volumes for ‡ reasonable periods of time. Be careful not to adjust the volume as ‡ your hearing adapts. Do not turn up the volume so high that ‡ you can’t hear what’s around you. You should use caution or temporarily ‡ discontinue use in potentially hazardous situations. Do not use headphones while operating a motorized vehicle, cycling, VNDWHERDUGLQJHWFLWPD\FUHDWHDWUDIÀF hazard and is illegal in many areas. the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. o Battery usage CAUTION – To prevent battery leakage which may result in bodily injury, property damage, or damage to the unit: Install all batteries correctly, + and ‡ - as marked on the unit. Do not mix batteries (old and new ‡ or carbon and alkaline, etc.). Remove batteries when the unit is ‡ not used for a long time. p Apparatus shall not be exposed to dripping or splashing. q Do not place any sources of danger on WKHDSSDUDWXVHJOLTXLGÀOOHGREMHFWV OLJKWHGFDQGOHV r This product may contain lead and mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance: www.eiae.org. Where the MAINS plug or an appliance ‡ coupler is used as the disconnect device, the disconnect device shall remain readily operable. Visible and invisible laser radiation when ‡ open. Avoid exposure to beam. Warning Never remove the casing of this apparatus. ‡ Never lubricate any part of this apparatus. ‡ Never place this apparatus on other electrical ‡ equipment. Keep this apparatus away from direct sunlight, ‡ QDNHGÁDPHVRUKHDW Never look into the laser beam inside this ‡ apparatus. Ensure that you always have easy access to the ‡ power cord, plug or adaptor to disconnect this apparatus from the power. English EN

Fi System Congratulations on your purchase, and ZHOFRPHWR3KLOLSV7RIXOO\EHQHÀWIURPWKH support that Philips offers, register your product at www.philips.com/welcome. Introduction With this unit, you can enjoy audio from discs, USB devices, iPod players and other external devices, or listen to radio stations. The unit offers Digital Sound Control (DSC) and Dynamic Bass Boost (DBB) to enrich sound. The unit supports the following media formats: What’s in the box Check and identify the contents of your package: Main unit ‡ Remote control ‡ 1 x MP3 link cable ‡ Mounting kit (2 dowels and 2 screws) ‡ Quick start guide ‡ User manual ‡ Wall mounting instructions ‡ Notice $Q\FKDQJHVRUPRGLÀFDWLRQVPDGHWRWKLV device that are not expressly approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment. Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.) Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment. This apparatus includes this label: Class II equipment symbol This symbol indicates that the apparatus has a double insulation system. Windows Media and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries. EN

Adjust volume. ‡ g Open/close the disc compartment. ‡ h Display panel Show current status. ‡ i Dock for iPod j Jack for the headphone. ‡ k MP3 LINK Audio input jack (3.5mm ) for an ‡ external audio device. l FM antenna Improve FM reception. ‡ m Remote sensor Overview of the main unit a Turn on the unit, or switch to ‡ standby mode, or switch to Eco Power standby. b SOURCE Select a source: CD, FM tuner, USB, ‡ iPod, or MP3 link. c / Skip to the previous/next track. ‡ Search within a track. ‡ Tune to a radio station. ‡ Select 12 hour or 24 hour format. ‡ d Start or pause play. ‡ e Stop play or erase a program. ‡ English EN

‡ c CD Select disc source. ‡ d / Navigate in the iPod menu. ‡ Skip to the previous/next album. ‡ / Skip to the previous/next track. ‡ Search within a track. ‡ Tune to a radio station. ‡ Select 12 hour or 24 hour format. ‡ Start or pause play. ‡ e USB/MP3 LINK Select USB device source. ‡ Select external audio device source. ‡ f RDS/DISPLAY Select display information during play. ‡ * RDS is not available. g Mute or restore volume. ‡ h VOL +/- Adjust volume. ‡ i Numeric keypad Select a track from a disc directly. ‡ j PROG/CLOCK SET Program tracks. ‡ Program radio stations. ‡ Set the clock. ‡ k SLEEP/TIMER Set the sleep timer. ‡ Set the alarm timer. ‡ l DSC Select a preset sound setting. ‡ m DBB Turn on or off dynamic bass ‡ enhancement. n AC cord o Jack for a USB mass storage device. ‡ Overview of the remote control a Turn on the unit, or switch to ‡ standby mode, or switch to Eco Power standby. EN

‡ performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the rear of the apparatus. Write the numbers here: Model No. __________________________ Serial No. ___________________________ Placement

When you connect power and no radio stations are stored, the unit automatically begins to store radio stations. 1 Connect the unit to the power supply. [AUTO INSTALL - PRESS PLAY » KEY] (auto install - press play key) is displayed. 2 Press on the main unit to start installation. The unit automatically stores radio » VWDWLRQVZLWKVXIÀFLHQWVLJQDOVWUHQJWK When all the available radio stations » DUHVWRUHGWKHÀUVWSUHVHWUDGLRVWDWLRQ is broadcast automatically. Set clock Note You can set the clock in the standby mode ‡ only. 1 Press PROG/CLOCK SET to enter the clock setting mode. [SET CLOCK] (set clock) scrolls on » the screen. 2 Press / repeatedly to select 12 hour or 24 hour format. 3 Press PROG/CLOCK SETWRFRQÀUP The hour digits are displayed and begin » to blink. 4 Press / to set the hour. 5 Press PROG/CLOCK SETWRFRQÀUP The minute digits are displayed and » begin to blink. 6 Press / to set the minute. 7 Press PROG/CLOCK SETWRFRQÀUPWKH clock setting. 1 Open the battery compartment. 2 Insert 2 AAA batteries with correct polarity (+/-) as indicated. 3 Close the battery compartment. Note If you are not going to use the remote control ‡ for a long time, remove the batteries. Do not use old and new or different types of ‡ batteries in combination. Batteries contain chemical substances, so they ‡ should be disposed of properly. Connect power Caution Risk of product damage! Ensure that the ‡ power supply voltage corresponds to the voltage printed on the bottom of the unit. Before connecting the AC cord, ensure you ‡ have completed all other connections. Note The type plate is located on the rear of the ‡ main unit. 1 Connect the AC cord to the AC outlet. EN

1 Press CD to select the disc source. 2 Press to open the disc compartment. 3 Insert a disc with the printed side facing outward. 4 Press to close the disc compartment. Play starts automatically. If not, press » . Play from USB Note Ensure that the USB device contains playable ‡ audio content. 1 Insert the USB device into the socket. Turn on 1 Press . The unit switches to the last selected » source. Switch to standby 1 Press again to switch the unit to standby mode. The clock (if set) appears on the » display panel. To switch the unit to Eco Power Standby mode: 1 In the standby mode, press and hold for more than 2 seconds. The backlight on the display panel » turns off. English EN

‡ stops. You can program a maximum of 40 tracks. 1 Press PROG/CLOCK SET to activate the program mode. [PROG] (program) is displayed. » 2 For MP3/WMA tracks, press / to select an album. 3 Press / to select a track, then press PROG/CLOCK SETWRFRQÀUP 4 Repeat steps 2 to 3 to program more tracks. 5 Press to play the programmed tracks. During play, [PROG] (program) is » displayed. To erase the program, in the stop ‡ position, press . 2 Press USB/MP3 LINK to select the USB source. Play starts automatically. If not, press » . To select a folder, press ‡ / . 7RVHOHFWDQDXGLRÀOHSUHVV ‡ / . Play options Pause/resume play 1 During play, press to pause/resume play. Skip to a track For CD: 1 Press / to select another track. To select a track directly, you can ‡ also press a key on the numerical keypad. For MP3 disc and USB: 1 Press to select an album or a folder. 2 Press / WRVHOHFWDWUDFNRUDÀOH Search within a track 1 During play, press and hold / . 2 Release to resume normal play. 6HOHFWUHSHDWVKXIÁHSOD\RSWLRQV 1 During play, press REPEAT/SHUFFLE repeatedly to select a repeat option or WKHVKXIÁHSOD\PRGH [ ‡ ]: the current track is played repeatedly. [ ‡ ]: all tracks are played repeatedly. [ ‡ ]: all tracks are played randomly. 2 To resume normal play, press REPEAT/ SHUFFLE repeatedly until no option is displayed. EN

The connected iPod plays automatically. » To pause/resume play, press ‡ . To skip to a track, press ‡ / . To search during play, press and ‡ hold / , then release to resume normal play. Charge the iPod When the unit is connected to power, the docked iPod begins to charge. 5 Play iPod You can enjoy audio from iPod through this Micro Hi-Fi system. Compatible iPod Apple iPod models with a 30-pin dock connector: iPod classic ‡ iPod touch ‡ iPod nano ‡ iPod 5th generation (video) ‡ iPod with color display ‡ iPod mini ‡ Play an iPod player 1 Place the iPod player in the dock. English EN

manually You can program a maximum of 20 preset radio stations (FM). 1 Tune to a radio station. 2 Press PROG/CLOCK SET to activate program mode. [PROG] (program) is displayed. » 3 Press / to allocate a number to this radio station, then press PROG/CLOCK SETWRFRQÀUP 4 Repeat the above steps to program other stations. Tip To overwrite a programmed station, store ‡ another station in its place. Select a preset radio station 1 In tuner mode, press / to select a preset number. Tip Position the antenna as far as possible from ‡ TV, VCR or other radiation source. For optimal reception, fully extend and adjust ‡ the position of the antenna. 6 Listen to radio Tune to a radio station 1 Press TUNER to select FM. 2 Press and hold / for more than 2 seconds. [SEARCH] (search) is displayed. » The radio tunes to a station with » strong reception automatically. 3 Repeat step 2 to tune to more stations. To tune to a weak station, press ‡ / UHSHDWHGO\XQWLO\RXÀQGRSWLPDO reception. Program radio stations automatically You can program a maximum of 20 preset radio stations (FM). 1 In the tuner mode, press and hold PROG/ CLOCK SET for more than 2 seconds to activate automatic program mode. [AUTO] (auto) is displayed. » All available stations are programmed » in the order of waveband reception strength. 7KHÀUVWSURJUDPPHGUDGLRVWDWLRQLV » broadcast automatically. EN

This unit can switch to standby automatically after a set period of time. 1 When the unit is turned on, press SLEEP/TIMER repeatedly to select a set period of time (in minutes). When sleep timer is activated, » is displayed. To deactivate sleep timer 1 Press SLEEP/TIMER repeatedly until [OFF] (off) is displayed. When sleep timer is deactivated, » disappears on the display. Play from an external device You can also listen to an external audio device through this unit. 1 Press USB/MP3 LINK to select the MP3 link source. 2 Connect the supplied MP3 link cable to: the ‡ MP3 LINK jack (3.5mm) on the unit. the headphone jack on an external ‡ device. 3 Start to play the device (see the device user manual). 7 Other features Set the alarm timer This unit can be used as an alarm clock. The disc/radio/USB/iPod is activated to play at a preset time. Note Ensure that you have set the clock correctly. ‡ 1 Press to switch to standby mode. 2 Press and hold SLEEP/TIMER for more than two seconds. A prompt to select the source is » displayed. 3 Press CD, TUNER, USB or iPod to select a source. 4 Press SLEEP/TIMERWRFRQÀUP The clock digits are displayed. » The hour digits begin to blink. » 5 Press / to set the hour. 6 Press SLEEP/TIMERWRFRQÀUP The minute digits begin to blink. » 7 Press / to set the minute. The timer is set and activated. » » is displayed. English EN

‡ without prior notice. 6SHFLÀFDWLRQV $PSOLÀHU Total output power 2 x 5 W RMS Frequency response 125 Hz - 16 kHz, ± 3 dB Signal to noise ratio > 60 dB MP3 link input 0.5 V RMS 20 k Disc Laser type Semiconductor Disc diameter 12 cm /8 cm Support disc CD-DA, CD-R, CD-RW, MP3-CD, WMA-CD Audio DAC 24 Bits / 44.1 kHz Total harmonic distortion < 1.5% Frequency response 60 Hz -16 kHz (44.1 kHz) Signal to noise ratio > 75 dBA Tuner Tuning range FM: 87.5 - 108 MHz Tuning grid 100 KHz Number of presets 20 Speakers Speaker driver 3” woofer Speaker impedance 5 W, 3 8 Adjust sound Adjust volume level 1 During play, press VOL +/- to increase/ decrease the volume level. Mute sound 1 During play, press to mute/unmute sound. Select a preset sound effect 1 During play, press DSC repeatedly to select: [POP] (pop) ‡ [JAZZ] (jazz) ‡ [ROCK] (rock) ‡ [CLASSIC] (classic) ‡ >)/$7@ÁDW ‡ Enhance bass 1 During play, press DBB to turn on or off dynamic bass enhancement. If DBB is activated, [DBB] is displayed. » EN

:0$ÀOHVLQ/RVVOHVVIRUPDW ‡ Supported MP3 disc formats ISO9660, Joliet ‡ Maximum title number: 999 (depending ‡ RQÀOHQDPHOHQJWK Maximum album number: 99 ‡ Supported sampling frequencies: 32 kHz, ‡ 44.1kHz, 48 kHz Supported Bit-rates: 32-320 (kbps), ‡ variable bit rates ID3 tag v2.0 or later ‡ Directory nesting up to a maximum of 8 ‡ levels Maintenance Clean the cabinet Use a soft cloth slightly moistened with ‡ a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives. Clean discs When a disc becomes ‡ dirty, clean it with a cleaning cloth. Wipe the disc from the centre out. Do not use solvents ‡ such as benzene, thinner, commercially available cleaners, or antistatic spray intended for analogue records. Clean the disc lens After prolonged use, dirt or dust may ‡ accumulate at the disc lens. To ensure good play quality, clean the disc lens with Philips CD lens cleaner or any commercially available cleaner. Follow the instructions supplied with cleaner. General information AC power 120 V~, 60 Hz Operation Power Consumption 15 W Standby Power Consumption < 2 W Eco Power Standby Power Consumption < 1 W USB Direct Version 2.0/1.1 Dimensions - Main Unit (W x H x D) 542 x 238 x 102 mm Weight - Main Unit 3.935 kg USB playability information Compatible USB devices: 86%ÁDVKPHPRU\86%RU86% ‡ 86%ÁDVKSOD\HUV86%RU86% ‡ memory cards (requires an additional ‡ card reader to work with this unit) Supported formats: 86%RUPHPRU\ÀOHIRUPDW)$7 ‡ FAT16, FAT32 (sector size: 512 bytes) MP3 bit rate (data rate): 32-320 Kbps and ‡ variable bit rate WMA v9 or earlier ‡ Directory nesting up to a maximum of 8 ‡ levels Number of albums/ folders: maximum 99 ‡ Number of tracks/titles: maximum 999 ‡ ID3 tag v2.0 or later ‡ File name in Unicode UTF8 (maximum ‡ length: 128 bytes) Unsupported formats: Empty albums: an empty album is an ‡ album that does not contain MP3/WMA ÀOHVDQGLVQRWEHVKRZQLQWKHGLVSOD\ 8QVXSSRUWHGÀOHIRUPDWVDUHVNLSSHG ‡ For example, Word documents (.doc) or 03ÀOHVZLWKH[WHQVLRQGOIDUHLJQRUHG and not played. English EN

‡ signs) aligned as indicated. Replace the battery. ‡ Aim the remote control directly at the ‡ sensor on the front of the unit. &DQQRWGLVSOD\VRPHÀOHVLQ86%GHYLFH 7KHQXPEHURIIROGHUVRUÀOHVLQWKH86% ‡ device has exceeded a certain limit. This phenomenon is not a malfunction. 7KHIRUPDWVRIWKHVHÀOHVDUHQRW ‡ supported. USB device not supported The USB device is incompatible with the ‡ unit. Try another one. Poor radio reception Increase the distance between the unit ‡ and your TV or VCR. Fully extend and adjust the FM antenna. ‡ Clock/timer setting erased Power has been interrupted or the power ‡ cord has been disconnected. Reset the clock/timer. ‡ Timer does not work Set the clock correctly. ‡ Switch on the timer. ‡ 10 Troubleshooting Warning Never remove the casing of this apparatus. ‡ To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site www. philips.com/welcome. When you contact Philips, ensure that the apparatus is nearby and the model number and serial number are available. No power Ensure that the AC power plug of the ‡ unit is connected properly. Ensure that there is power at the AC ‡ outlet. To save power, the unit switches to ‡ standby automatically 15 minutes after a play reaches the end and no control is operated. No sound Adjust the volume. ‡ No response from the unit Disconnect and reconnect the AC power ‡ plug, then turn on the unit again. No disc detected Insert a disc. ‡ Check if the disc is inserted with the print ‡ side facing inward. Wait until the moisture condensation at ‡ the lens has cleared. Replace or clean the disc. ‡ 8VHDÀQDOL]HG&'RUFRUUHFWIRUPDWGLVF ‡ Remote control does not work %HIRUHSUHVVLQJDQ\IXQFWLRQEXWWRQÀUVW ‡ select the correct source with the remote control instead of the main unit. Reduce the distance between the remote ‡ control and the unit. EN