Philips MCM108B/93 Operation & User’s Manual

TUNING iR 1 2 3 8 9 4 5 6 7 0 # @ ! M STANDBY-ON 1

( ALBUM 4 3 for MP3 disc......................selects an album. ) DBB – (Dynamic Bass Boost) enhances the bass. ¡ DSC – (Digital Sound Control) selects sound characteristics: JAZZ/POP/CLASSIC/ROCK. English Controls Controls on the system and remote control 1 BAND – for Tuner (on the set only) selects waveband. 2 SOURCE (CD/ TUNER/ AUX) – switches on the system. – selects the respective sound source for CD/ FM/ MW/ AUX. 3 STANDBY-ON / y – switches the system to standby/on. 4 PROG/CLOCK for CD ................. programs tracks and reviews the program. for clock .............. sets the clock function. 5 OPEN•CLOSE – opens/closes the CD door. 6 VOLUME – / + – adjusts volume level. 7 TUNING 0 – tunes to radio stations. 8 iR SENSOR – infrared sensor for remote control. 9 n – connect headphones. 0 ÉÅ for CD ................. starts or pauses CD playback. ! ¡1 / 2™ – skips to the beginning of a current track/ previous/ next track. – fast searches back and forward within a track/ CD. @ STOP 9 – stops CD playback or erase a CD program. # AUX IN – connects to external audio source. $ MUTE – switches playback sound off and on. % REPEAT – repeats a track/disc/all programmed tracks. ^ SHUFF (SHUFFLE) – plays CD/MP3 tracks in random order. & SLEEP – activates/deactivates or selects the sleeper time. Notes for remote control: – First select the source you wish to control by pressing one of the source select keys on the remote control (for example CD , TUNER). – Then select the desired function (for exampleÉ, í, ë). VOLUME ALBUM DBB DSC MUTE SLEEP TIMER REPEAT SHUFF AUX PROG CD TUNER 3 2 % & @ ! ) $ 4 ^ * 0 ( 6 ¡ 2

– remote control with 1 x CR2032 battery – MW loop antenna Environmental Information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet). Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment. Safety Information ●Before operating the system, check that the operating voltage indicated on the typeplate (or the voltage indication beside the voltage selector) of your system is identical with the voltage of your local power supply. If not, please consult your dealer. ●Place the system on a flat, hard and stable surface. ●Where the MAINS plug or an appliance coupler is used as the disconnet device, the disconnet device shall remain readily operable. ●Install the unit near the AC outlet and where the AC power plug can be easily reached. ●The apparatus shall not be exposed to dripping or splashing. ●Place the system in a location with adequate ventilation to prevent internal heat build-up in your system. Allow at least 10 cm (4 inches) clearance from the rear and the top of the unit and 5 cm (2 inches) from each side. ●The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc. ●Do not expose the system, batteries or discs to excessive moisture, rain, sand or heat sources caused by heating equipment or direct sunlight. ●No naked flame sources, such as lighted candles, should be placed on the apparatus. ●No objects filled with liquids, such as vases, shall be placed on the apparatus. ●If the system is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lens of the disc unit inside the system. Should this occur, the CD player would not operate normally. Leave the power on for about one hour with no disc in the system until normal playback is possible. ●The mechanical parts of the set contain self- lubricating bearings and must not be oiled or lubricated. ●When the system is switched to Standby mode, it is still consuming some power. To disconnect the system from the power supply completely, remove the AC power plug from the wall socket. 3

system. A A A A A Power – Before connecting the AC power cord to the wall outlet, ensure that all other connections have been made. WARNING! – For optimal performance, use only the original power cable. – Never make or change any connections with the power switched on. B B B B B Antennas Connection MW antenna 1 Unfold the loop antenna and if necessary, use screws (not supplied)to fix it to a flat, hard and stable place: 2 Fit the plug of the loop antenna to MW ANTENNA as shown above. 3 Adjust the antenna for optimal reception FM Antenna It is unnecessary to connect the FM pigtail antenna since it is fixed to the main unit. ●Position the antenna as far as possible from a TV, VCR or other radiation source. 4 AC power cord FM wire antenna Speaker (right) Speaker (left) MW loop antenna 1 2

Front Speakers Connect the speaker wires to the SPEAKERS terminals, right speaker to "RIGHT" and left speaker to "LEFT", the wire (marked red) to "+" and the wire (marked black) to "-". ●Fully insert the stripped portion of the speaker wire into the terminal as shown. Notes: – For optimal sound performance, use the supplied speakers. – Do not connect more than one speaker to any one pair of +/- speaker terminals. – Do not connect speakers with an impedance lower than the speakers supplied. Please refer to the SPECIFICATIONS section of this manual. Before using the remote control 1 Pull out the plastic protective sheet. 2 Select the source you wish to control by pressing one of the source select keys on the remote control (for example CD, TUNER). 3 Then select the desired function (for example É, í, ë). Replacing battery (lithium CR2032) into the remote control 1 Pull out the knob A slightly to the left. 2 Pull out the battery compartment B . 3 Replace a new battery and fully insert the battery compartment back to the original position. CAUTION! Batteries contain chemical substances, so they should be disposed off properly. B A 5

the preparation procedures. Switching the system on ● Press STANDBY-ON (y on the remote control). ➜The system will switch to the last selected source. ● Press SOURCE (CD, TUNER or AUX on the remote control). ➜The system will switch to the selected source. To switch the system to standby mode ● Press STANDBY-ON (y on the remote control). ➜The clock is displayed. Power-saving automatic standby The power-saving feature automatically switches to standby 15 minutes after a CD playback has ended and no control is operated. Adjusting volume and sound 1 Press VOLUME – / + to increase or decrease volume. ➜Display shows the volume level and a number from 0-32. 2 Press DSC repeatedly to select the desired sound effect: JAZZ / POP / CLASSIC / ROCK. 3 Press DBB (on the remote control) to switch bass enhancement on or off. ➜Display shows: if the DBB is activated. 4 Press MUTE on the remote control to stop sound play-back instantly. ➜Playback will continue without sound and the display shows MUTE . ●To start sound playback you can: – press MUTE again; – adjust the volume controls; – change source. VOLUME DBB DSC DBB SOURCE VOLUME - + BAND O P E N / C L O S E PROG/CLOCK TUNING STANDBY-ON 6

touched. Loading a disc This CD player plays Audio Discs including CD- Recordables, CD-Rewritables and MP3 CD. ●CD-ROM, CD-I, CDV, VCD, DVD or computer CDs, however, are not possible. 1 Select CD source. 2 Press OPEN/CLOSE3 on the top of the system to open the CD compartment. ➜OPEN is displayed when you open the CD compartment. 3 Insert a disc with the printed side facing up and press down on OPEN/CLOSE3 to close the CD door. ➜READ is displayed as the CD player scans the contents of a disc, and then the total number of tracks and playing time (or the total number of albums and tracks for MP3 disc) are shown. Basic playback controls To play a disc ●Press 2; to start playback. ➜The current track number and elapsed playing time of the track are displayed during disc playback. To select a different track ●Press ¡1 2™ once or repeatedly until the desired track number appears in the display. To find a passage within a track 1 Press and hold down on ¡1 2™. ➜The disc is played at high speed and low volume. 2 When you recognise the passage you want, release ¡1 2™. ➜Normal playback continues. To interrupt playback ●Press 2; during playback. ➜The display freezes and the elapsed playing time flashes when playback is interrupted. ➜To resume, press 2; again. To stop playback ●Press 9. Notes: CD play will also stop when; – the CD door is opened. – the disc has reached the end. – you select another source: TUNER or AUX. – you select standby Playing an MP3 disc 1 Load an MP3 disc. ➜The disc reading time may exceed 10 seconds due to the large number of songs compiled into one disc. ➜"XXX YY" is displayed. XXX is the current track number and YY is the current album number. 2 Press ALBUM 4 3 to select a desired album.. CD REP MP3 ALL PROG POP TRK DBB M I C R O S Y S T E M iR M C M 1 0 8 AUX-IN VOLUME - + O P E N / C L O S E PROG/CLOCK TUNING 7

➜The album number will change accordingly as you reach the first track of an album by pressing ¡1 or the last track of an album by pressing 2™ . 4 Press 2; to start playback. ● During playback, press once ALBUM 4 3 to show the current album number. Supported MP3 disc formats: – ISO9660, Joliet, UDF 1.5 – Maximum title number: 512 (depending on filename length) – Maximum album number: 99 – Supported sampling frequencies: 32 kHz, 44.1kHz, 48 kHz – Supported Bit-rates: 32~256 (kbps), variable bitrates Different play modes: SHUFFLE and REPEAT You can select and change the various play modes before or during playback. The REPEAT modes can also be combined with PROGRAMME. SHUFFLE .........tracks of the entire disc are played in random order REPEAT ALL ...repeats the entire disc/ programme REPEAT............plays the current track continuously REPEAT ALB ....repeats all tracks in the current (for MP3 only) album 1 To select your play mode, press the SHUFF or REPEAT on the remote control before or during playback until the display shows the desired function. 2 Press 2; to start playback if in the STOP position. ➜If you have selected SHUFFLE, playback starts automatically. 3 To return to normal playback, press SHUFF or REPEAT on the remote control until the various SHUFFLE/ REPEAT modes are no longer displayed. ● You can also press 9 to cancel your play mode. Notes: – The SHUFFLE and REPEAT functions cannot be used simultaneously. – SHUFFLE play is not available in the programe mode. Programming track numbers Programme in the STOP position to select and store your disc tracks in the desired sequence. If you like, store any track more than once. Up to 20 (10 for MP3 disc) tracks can be stored in the memory. 1 In the stop position, use the ¡1 2™ to select your desired track number. ●For MP3, you may press ALBUM 4 3 to select a desired album, then press ¡1 2™ to select your desired track. 2 Press PROG (or PROG/CLOCK on the set) to store. ➜Display: PROG flashes, and is displayed briefly, then the selected track number (and the selected album number for MP3). 3 Repeat steps 1-2 to select and store all desired tracks. ➜FULL is displayed if you attempt to programme more than 20 (10 for MP3 disc) tracks. 4 To start playback of your disc programme, press 2;. Reviewing the programme ●Stop playback and press PROG (or PROG/ CLOCK on the set) repeatedly. ➜Display first shows a programme sequence, then the stored track number (and the album number for MP3). ●To exit review mode, pressÇ. Erasing the programme You can erase the programme by: ●pressing 9 once in the STOP mode; ●pressing 9 twice during playback; ●opening the CD compartment; ●Select another sound source. ➜PROG disappears from the display. CD/MP3 Operation 8

1 Select TUNER source. ➜ is displayed. 2 Press BAND (TUNER on the remote control) once or more to select your waveband. 3 Turn TUNING 0 to tune to a station. ➜Display shows: the frequency of the tuned station. Helpful hints: To improve radio reception: – For FM, extend coil antenna at the back of the unit fully for optimum reception. Listening to an external source You can listen to the sound of the connected external device through your system’s speakers. 1 Select AUX source. 2 Use a line-in cable (not supplied) to connect MCM 108’s AUX-IN jack (3.5 mm ) to an AUDIO OUT or headphone jack on an external equipment (such as CD player, or VCR). Maintenance Cleaning the Cabinet ●Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives. Cleaning Discs ●When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the centre out. ●Do not use solvents such as benzene, thinner, commercially available cleaners, or antistatic spray intended for analogue records. Cleaning the disc lens ● After prolonged use, dirt or dust may accumulate at the disc lens. To ensure good playback quality, clean the disc lens with Philips CD Lens Cleaner or any commercially available cleaner. Follow the instructions supplied with cleaner. TUNER SOURCE VOLUME - + BAND O P E N / C L O S E PROG/CLOCK TUNING STANDBY-ON 9

1 In Standby mode, press PROG/CLOCK button. ➜The clock digits for the hours flash. 2 Press ¡1 / 2™to set the hours. 3 Press PROG/CLOCK again. ➜The clock digits for the minutes flash. 4 Press ¡1 / 2™to set the minutes. 5 Press PROG/CLOCK to confirm the time. Note: – If the clock has not been set, -- --:-- -- will be displayed. Setting the timer ● The system can be used as an alarm clock. CD or TUNER can be set to switch on at a preset time. The clock time needs to be set first before the timer can be used. ● If no button is pressed within 90 seconds during timer setup, the system will exit timer setting mode automatically. 1 In any mode, press TIMER on the remote control for more than 2 seconds. 2 Press ¡1 / 2™(or CD / TUNER on the remote control) to select sound source. 3 Press TIMER to confirm your desired source. ➜The clock digits for the hours flash. 4 Press ¡1 / 2™ to set the hours. 5 Press TIMER again. ➜The clock digits for the minutes flash. 6 Press ¡1 / 2™to set the minutes. 7 Press TIMER to confirm the time. ➜The timer is now set and actiated. Note: - If source CD is selected and no disc is in the CD tray or the disc has an error, TUNER will be selected automatically. To activate and deactivate timer ●In standby or during playback, press TIMER once. ➜Display shows if activated, and disappears if deactivated. Activating and deactivating SLEEP The sleep timer enables the system to switch off by itself after a set period of time. The clock time needs to be set first before the sleep timer can be used. ●Press SLEEP on the remote control repeatly to select desired time before system shuts off. ➜Display shows SLEEP and series of time options for selection: , , , , , ... ●To deactivate, press SLEEP on the remote control once or more until “ “ is shown, or press STANDBY ON y on the system or remote control. AUX-IN M C M I C R O S Y S T E M iR 1 0 8 M SLEEP TIMER 10

warranty. Do not open the system as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or service centre. Problem Solution CD OPERATION “NO cd” is displayed. – Insert a disc. – Check if the disc is inserted upside down. – Wait until the moisture condensation at the lens has cleared. – Replace or clean the disc, see “Maintenance”. – Use a finalised CD-RW or CD-R, or a correct MP3-CD format disc. RADIO RECEPTION Radio reception is poor. – If the signal is too weak, adjust the antenna or connect an external antenna for better reception. – Increase the distance between the Micro HiFi System and your TV or VCR. GENERAL The system does not react when buttons – Remove and reconnect the AC power plug and are pressed. switch on the system again. Sound cannot be heard or is of poor – Adjust the volume. quality. – Disconnect the headphones. – Check that the speakers are connected correctly. – Check if the stripped speaker wire is clamped. – Make sure the MP3-CD was recorded within 32-256 kbps bit rate with sampling frequencies at 48 kHz, 44.1 kHz or 32 kHz. The left and right sound outputs are – Check the speaker connections and location. reversed. The remote control does not function – Select the source (CD or TUNER, for example) properly. before pressing the function button (É,í,ë). – Reduce the distance between the remote control and the system. – Insert the batteries with their polarities (+/– signs) aligned as indicated. – Replace the batteries. – Point the remote control directly toward IR sensor on the front of the system. The timer is not working. – Set the clock correctly. – PressTIMER to switch on the timer. The Clock/Timer setting is erased. – Power has been interrupted or the power cord has been disconnected. Reset the clock/timer. Troubleshooting 11

Signal-to-noise ratio .......................... * 62 dBA (IEC) Frequency response .........60 – 16000 Hz, ± 3 dB Impedance loudspeakers ......................................... 8 1 Impedance headphones ................. 32 1 – 1000 1 CD PLAYER Frequency range .................................. 20 – 20000 Hz Signal-to-noise ratio ............................................ 75 dBA TUNER FM wave range ................................... 87.5 – 108 MHz MW wave range ................................ 531 – 1602 kHz Sensitivity at 75 1 – mono, 26 dB signal-to-noise ratio ............ 2.8 μV – stereo, 46 dB signal-to-noise ratio ........ 61.4 μV Selectivity ................................................................. * 28 dB Total harmonic distortion..................................... ) 5% Frequency response ..... 63 – 12500 Hz (± 3 dB) Signal-to-noise-ratio .......................................... * 50 dB SPEAKERS Bass reflex system Dimensions (w x h x d) .150 x 150 x 200 (mm) GENERAL INFORMATION AC Power.............................................220V-240V 50Hz, Dimensions (w x h x d) .. 150 x 150 x 220 (mm) Weight (with/without speakers) .................................. ............................................................... approx. 4.9 / 2.3 kg Standby power consumption .......................... < 3 W Subject to modification 12

MCM108 MCM108B MCM108C Meet Philips at the Internet http://www.philips.com English PDCC-JH-J.W.Wang-0716 CLASS 1 LASER PRODUCT