Summit FS407LBI Owner's Manual

producing appliances or heating ducts and out of direct sunlight. : • Let hot foods cool to room temperature before placing in the freezer. Over- loading the unit forces the compressor to run longer. Foods that freeze too slowly may lose quality or spoil. • Be sure to wrap foods properly and wipe containers dry before placing them in the freezer. This cuts down on frost build-up inside the unit. • Freezer storage drawers should not be lined with aluminum foil, wax paper or paper toweli ...

producing appliances or heating ducts and out of direct sunlight. : • Let hot foods cool to room temperature before placing in the freezer. Over- loading the unit forces the compressor to run longer. Foods that freeze too slowly may lose quality or spoil. • Be sure to wrap foods properly and wipe containers dry before placing them in the freezer. This cuts down on frost build-up inside the unit. • Freezer storage drawers should not be lined with aluminum foil, wax paper or paper toweli ...

cord is damaged, have it replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. • Avoid locating the unit in moist areas. Too much moisture in the air will cause frost to form quickly on the evaporator, requiring more frequent defrosting of the freezer. • Plug the unit into an exclusive, properly installed and grounded wall outlet. Do not under any circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning p ...

cord is damaged, have it replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. • Avoid locating the unit in moist areas. Too much moisture in the air will cause frost to form quickly on the evaporator, requiring more frequent defrosting of the freezer. • Plug the unit into an exclusive, properly installed and grounded wall outlet. Do not under any circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning p ...

cord is damaged, have it replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. • Avoid locating the unit in moist areas. Too much moisture in the air will cause frost to form quickly on the evaporator, requiring more frequent defrosting of the freezer. • Plug the unit into an exclusive, properly installed and grounded wall outlet. Do not under any circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning p ...

However, when placing your unit, you should allow the following clearances to ensure proper ventilation for optimal performance: 1/4” on both sides, 2” at the rear and 1/16” at the top. Be sure that airflow beneath the unit is not restricted. • Use two or more people to move and install the freezer. Failure to do so can result in back or other injury. • To ensure proper ventilation for your freezer, the front of the unit must be completely unobstructed. Choose a well-ventilated area with temperatur ...

2.8 cu. ft. Electrical Input 115V AC/60Hz 115V AC/60Hz Rated Current 1.6A 1.6A Power Input 90W 90W Refrigerant R134a, 3.0 oz. R134a, 3.0 oz. Installation Built-in Built-in Unit Weight 64 lbs. 64 lbs. Unit Dimensions (W x D x H*) 19⅞" x 23¼" x 33¼" to 34½" 19⅞" x 23¼" x 33¼" to 34½" *For models with suffix ADA, height is modified to 32” for use under lower counters Installation Instructions Before Using Your Freezer • Remove the exterior and interior packing. : • Check to be sure you have ...