Honeywell CHRONOTHERM III T8611M Owner's Manual

69-1400—1 10 OPERATING THE DELUXE PROGRAMMABLE THERMOSTAT Setting Temporary Temperatures Changing Temperature Setting Until the Next Program Period Press increase s or decrease t key until the desired temperature setpoint is displayed. NOTE: If s or t appear under the temperature display, it means that both the heating and cooling setpoints are being adjusted. Tapping the key will change both the heat and cool setpoints by one degree. Press after the desired set- point is reached to check the setpoints. NOTE: The temporary temperature setting is displayed for ...

69-1400—1 10 OPERATING THE DELUXE PROGRAMMABLE THERMOSTAT Setting Temporary Temperatures Changing Temperature Setting Until the Next Program Period Press increase s or decrease t key until the desired temperature setpoint is displayed. NOTE: If s or t appear under the temperature display, it means that both the heating and cooling setpoints are being adjusted. Tapping the key will change both the heat and cool setpoints by one degree. Press after the desired set- point is reached to check the setpoints. NOTE: The temporary temperature setting is displayed for ...

69-1400—1 10 OPERATING THE DELUXE PROGRAMMABLE THERMOSTAT Setting Temporary Temperatures Changing Temperature Setting Until the Next Program Period Press increase s or decrease t key until the desired temperature setpoint is displayed. NOTE: If s or t appear under the temperature display, it means that both the heating and cooling setpoints are being adjusted. Tapping the key will change both the heat and cool setpoints by one degree. Press after the desired set- point is reached to check the setpoints. NOTE: The temporary temperature setting is displayed for ...

11 69-1400—1 4. Press increase s or decrease t key to adjust temperature settings. NOTE: The display changes from the setpoint to the room temperature after approximately 3 seconds. 5. Press Run Program to cancel the Hold and to return to the program. Changing Temperature Setting Until a Designated Day and Period 1. Press Hold Temp twice. 2. Press Time s or Time t until the desired number of days is displayed (1 to 255 days). (Example: 18 = Hold will override the daily programs for 18 days) 3. Press Wake, Leave, Return or Sleep to select the period the program ...

7 69-1400—1 5. Press Heat/Cool Settings to switch to other system temperature setpoint. NOTE: The program times are the same for both heating and cooling. 6. Press increase s or decrease t key until the desired temperature setpoint is dis- played. 7. Press Leave, Return or Sleep and repeat steps 3, 4, 5 and 6 for programming the rest of the day. The first day is now programmed. IMPORTANT Repeat steps 1 through 7 for each day of the week that has a different pro- gram than the first day. Refer to Copying a Day section to copy any program day to another. 8. Press ...

5 69-1400—1 Setting the Current Day and Time IMPORTANT Always press the keys with your fingertip or similar blunt tool. Sharp instru- ments like pens and pencil points can damage the keyboard. 1. Press Set Current Day/Time. NOTE: On initial power up or after an extended power loss, 1:00 pm flashes on the display until a key is pressed. 2. Press Day until the current day is displayed. NOTE: Sun = Sunday, Mon = Monday, Tue = Tuesday, Wed = Wednesday, Thu = Thursday, Fri = Friday, Sat = Saturday. 3. Press Time s or Time t until the current time is displayed. NOTE: ...