Philips PET741V Quick Start Manual

built-in lithium battery to supply power to the player when you are on travel. 1 Slide the POWER switch to the OFF position (charging of the DVD player only possible in the power-off mode). 2 Connect the supplied power adaptor cord (or the car adaptor) to the player and AC mains (or the car cigarette lighter outlet) to start charging. ➜The CHG indicator turns red . ➜When the battery is fully charged, the indicator turns off. 3 Disconnect the power adaptor cord (or the car adaptor) when the CHG indicator turns off. Note: – You can also connect the supplied power adaptor cord (or the car adaptor) to the player and AC mains (or the car cigarette lighter outlet) directly wherever possible. Charge your battery 1Quick start guide Philips Portable DVD Player PET741/PET741B/PET741C/PET741N/PET741R/PET741V/PET741W 1 Open the lid of the player. 2 Slide the POWER switch to ON to switch on the DVD player. ➜The indicator turns on. 3 Slide OPEN on the player. 4 Remove the protective card (if any) and load a disc with the label side facing up. 5 Close the disc door. ➜Playback will start automatically. If not, press 2;. 6 To stop playback, press 9. 2 Enjoy (Disc operation) Note: During play, you can: – Press OPTION to select some play options: audio, subtitle, repeat, and time display. – Press directly to adjust brightness of screen backlight to match lighting conditions. 2 Enjoy (AV OUT) Connecting additional equipment (TV for example) 1 Connect the AV OUT socket on the set to the video and audio sockets on a TV as shown directly. 2 Switch on the TV and set to the correct video- in channel. ➜You can consult the owner's manual of your TV. (If your TV does not have Audio and Video inputs, you will need to purchase a RF modulator. Please consult your dealer.) Printed in China QSG_37_V2. White Red Yellow Not supplied PET741-Eng_QSG.qxd 9/10/09 15:50 Page 1