Philips 43PP8420 Directions For Use Manual

Product Highlights . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Installing the TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Using the TV keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Using the Remote Control Keys . . . . . . . . . . . . . . . .6–7 Operation Using the Menus Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Install . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8–13 Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14–17 Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19–22 Using Program List . . . . . . . . . . . . . . . . . . . . . . . . . . .23 Using Smart Surf . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 Using Smart Picture and Smart Sound . . . . . . . . . . . . .24 Using the Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . .25 Using PIP (Picture-in-Picture) . . . . . . . . . . . . . . . . . . . .26 Using Teletext (if provided) . . . . . . . . . . . . . . . . . . .27–28 Peripheral Equipment Connecting Peripheral Equipment . . . . . . . . . . . . .29–37 Selecting Connected Equipment for Viewing . . . . . . . .38 General Information Care, Cleaning, and Tips . . . . . . . . . . . . . . . . . . . . . . . .39 Before Calling Service . . . . . . . . . . . . . . . . . . . . . . . . .40 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42 International Guarantee Conditions . . . . . . . . . . . . . . .43 Consumer Information Centres . . . . . . . . . . . . . . .44–47 SAFETY INFORMATION Disconnect mains plug when : • the red light below the TV screen is flashing continuously • a bright white line is displayed across the screen • cleaning the TV screen (never use abrasive cleaning agents; use a slightly damp chamois leather or soft cloth) • a lightning storm is occurring • the set is left unattended for a prolonged period. Never attempt to repair a defective TV yourself. Always consult a skilled service person. Battery Usage CAUTION : To prevent battery leakage which may result in bodily injury or damage to the remote : • Install ALL batteries correctly, + and – as marked on the remote control. • Do not mix batteries : (OLD and NEW or CARBON and ALKALINE, etc.). • Remove batteries when the remote is not used for a long time. Thank you for purchasing this television set. You are now the proud owner of a Philips TV, which promises full value to you as a customer. Please read this manual carefully and thoroughly for help with installation and operation.

registered trademark of Philips Consumer Electronics North America. Copyright 2002 Philips Consumer Electronics. *Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Philips HD Pix optics system answers the demand for extreme resolution HD with cutting-edge processing and display tech- nology, including microphosphor CRTs, hybrid projection lenses, first-surface mirrors, fine-pitched lenticular screens, and Philips wideband amplifier. Auto IntelliSense® Focus Automatically adjusts the picture convergence at the push of a key. After reviewing a special test pat- tern, optical sensors send position information to the controller, which then corrects the picture. Auto IntelliSense® Focus responds to the natural and man-made magnetic field conditions where the projection TV is located, so you always enjoy the best possible pic- ture. 100Hz Digital Scan eliminates picture flickering and line jitter, offering a stable picture for relaxed viewing (no eye strain). The 100Hz digital scan option can be selected in the onscreen menu. Progressive Scan doubles the number of visible picture lines per field by displaying all picture frame lines at once. This mini- mizes the visibility of the scan lines. The progressive scan option can be selected in the onscreen menu. High-definition Inputs allow you to connect digital equipment with 1080i and 480p signals for 60Hz and 576p signals for 50Hz. The AV4 sockets are for YPbPr or RGB+HV sync connections, plus audio. The AV5 sockets are for RGB (or YPbPr with adaptor) DB15 con- nections, plus audio. Component Video Inputs support advanced video input—such as DVD video—for superb colour performance. Active Control™continuously measures and corrects all incoming signals with automatic digital noise reduction and auto sharp- ness to provide the best possible picture. Automatic Phosphor Aging Compensation (APAC™) functions like a screen saver for your TV. Nonmoving images can be bad for a television screen. If a video image remains stationary, it can eventually leave a permanent after-image. Video games and the stationary black bars around some movies are examples of sources of concern. Philips APAC technology addresses this prob- lem. Periodically, APAC automatically shifts your television picture in increments that are very small and yet large enough to blur image retention that can lead to screen burn. Coupled with the Philips Auto Screen Format feature, APAC helps provide you protec- tion from the dreaded screen burn. Protective Screen Filter (if provided; availability varies) gives the best possible picture while still protecting your investment. Specifically formulated by Philips for HD displays, this protective screen filter helps prevent accidental damage to the delicate front lenticu- lar screen. Dolby*Virtual Surround uses two speakers to simulate the surround effect produced by a multichannel system. Digital Comb Filter makes the finest colour details purer and sharper. It eliminates disturbing cross-colour (Moiré) effects between different colours that you normally see with striped clothing worn on camera. The digital comb filter works by electronical- ly separating the chroma (colour) and luminance (black and white) components of the TV signal, preventing cross-colour interfer- ence. Dual-window,Two-tuner Picture-in-picture (PIP) allows you to watch two shows, side by side. No video recorder is necessary for tuning PIP pictures. Your set’s two separate tuners let you select two shows and display both in windows of equal proportion. Supporting Features • Digital Colour Transient Improvement (CTI) • Digital Histogram • Picture Freeze • Auto Aspect Ratio Adaptation (and 16:9 compress, expand 4:3) • Incredible Surround™ • Automatic Volume Leveler (AVL) • Independent Headphone Volume Control • Easy Tune™ (Auto Search,Auto Tune, and Auto Install) • Alternate Channel • Smart Surf • Low-power standby (<1 W)

15 cm Do not place the TV in direct sunlight or near a heat- ing appliance. Mains Power Switch Standby 1 The major benefit of this projection tel- evision is its large viewing screen. To see the large screen at its best, test vari- ous locations in the room to find the optimal spot for viewing. Be sure to allow a minimum of 15 cm of space around the TV. To avoid cabinet warping, cabinet color changes, and increased chance of set failure, do not place the TV where tem- peratures can become excessively hot—for example, in direct sunlight or near a heating appliance. Magnetic fields, such as those of exter- nal speakers, may cause the picture to distort if the speakers are placed too close to the television. Move the mag- netic field source away from the TV until there is no picture distortion. 2 Insert the aerial plug firmly into the ANTENNA IN 75Ωsocket at the rear of the set. 3 Insert the mains plug in the wall sock- et. Refer to the back of the TV set for the correct operation voltage. Consult your local dealer if your main supply is different. To prevent damaging the mains (AC) cord, which could cause hazard, do not place the TV on the cord. 4 Remove the cover of the battery com- partment on the remote control. Insert the two batteries supplied (Type R6-1.5V). The batteries supplied do not contain the heavy metals mercury and cadmi- um. Nevertheless, in many countries exhausted batteries may not be dis- posed of with your household waste. Please check on how to dispose of exhausted batteries according to local regulations. See the battery caution statement on page 2. Note : This remote control functions with TVs that use the RC5 signalling standard. 5 Switch the TV on : Press the mains power switch on the front of the TV. If the Standby key is lighted, press the CH +/– keys, digit keys, or the Standby key on the remote control. Or press the Standby or CH keys on the front of the TV. 15 cm 15 cm ANTENNA IN 75Ω Socket on the rear of the TV

MAINS POWER KEY Switches the mains power on or off. REMOTE SENSOR Receives infrared commands to acti- vate controls when the remote-control handset is aimed at it and remote keys are pushed. VOL -A +A / MENU The -A key adjusts the sound volume softer. The +A key adjusts the sound volume louder. Pressing -A and +A simultaneously displays the onscreen TV menu. With a menu item selected, pressing the -A or +A key allows entry to activate the item. Pressing -A and +A simultaneously and repeated- ly exits the onscreen menu. CH %fi The fikey selects channels in descending order. The % key selects channels in ascending order. When the onscreen menu is displayed, pressing fior % selects the next item in the menu. Also, use either of these keys to switch the TV on from Standby mode. IntelliSense When pressed, automatically adjusts the set’s picture convergence using the Auto IntelliSense® focus feature. STANDBY Switches the TV on or activates standby mode.

ly switch to standby mode. Choose 15, 30, 45, 60, 90, 120, 180, or 240 minutes. See page 25. A/CH (Alternate Channel) Allows you to alternate between the last viewed channel and the pres- ent channel. PICTURE-IN-PICTURE (PIP) Allows you to access the Picture-in-Picture and Dual-window features (if provided). See page 26. FORMAT Each press selects another picture format. For AV1, CVI, AV2, or AV3, the options are 4:3, Auto, and Expand 4:3. For AV4 and AV5 1080i signal sources, the options are 4:3, Auto, and Compress 16:9. For AV4 and AV5 480p signal sources, no screen format options are avail- able through the TV. Control the format at the source (DVD player or digi- tal set-top box). DIGIT (0–9) Allows you to select a channel. Note : For a two-digit number, the sec- ond digit must be entered before the “–” sign disappears. SMART SOUND Allows you to select from three predefined optimal settings—Voice, Music, and Theatre—and a Personal setting based on your own selec- tions through the onscreen Sound menu. Press the key repeatedly to select a setting. See page 24. MENU Displays the main menu. Also allows you to go backwards in the menu system. CURSOR LEFT Allows you to access the menus and adjust the settings. CURSOR UP Allows you to select the next or previous item in the menu and to select a screen format. See page 22. VOLUME +/– Increases or decreases volume. AV Allows you to select the different signal sources connected to the TV. i+ (STATUS/EXIT) • Displays the channel number, sound and colour transmission modes, status of the sleep timer, channel name (if the channel has been named), and the current time (if the time has been set). • Allows you to navigate or make adjustments in multipoint-conver- gence mode. • Allows you to switch the menu off. DOLBY V (with Dolby* Surround Signals) Allows you to select various factory surround-sound listening modes : Dolby Virtual (Virtual Dolby Surround) Dolby Virtual uses two speakers to simulate the surround effect pro- duced by a multichannel system. Incredible Surround™ • In Stereo sound mode—when switched on, the Incredible Surround™fea- ture provides the feeling that the speakers are farther apart to enhance the home-cinema effect. • In Mono sound mode—when switched on, the Incredible Surround feature enables you to hear a spatial sound effect. *Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. USING THE REMOTE CONTROL KEYS

indicator lights up when the set is in standby mode.) • To switch the set on from standby mode, press the Standby, Channel +/–, or Digit (0–9) keys. FREEZE Allows you to freeze the main picture when PIP is off. SMART PICTURE Allows you to select from four predefined optimal settings—Rich, Natural, Soft, and Multimedia—and a Personal setting based on choices you make through the onscreen Picture menu. See page 24. SURF Allows you to select up to 10 channels and quickly view them. See page 23. CURSOR RIGHT Allows you to access the menus and adjust the settings. CURSOR DOWN Allows you to select the next or previous item in the menu or to select a screen format. See page 22. CHANNEL +/– Allows you to select channels in ascending and descending order. MUTE Allows you to mute the sound. To restore the sound, press the key again. TIMER Allows you to access the onscreen Timer menu, through which you can set the TV’s clock and the Timer. The Timer can be set to switch to another channel at a specified time while you are watching another channel or when the set is in standby mode. I–II Allows you to switch from stereo to mono sound during stereo trans- mission or to choose between language I or language II during dual sound transmission. TELETEXT Allows you to access Teletext information (if provided). See pages 27–28. PROGRAM LIST Allows you to navigate through a list of installed programmes for a quick overview of the channels and to activate the channel you have selected. See page 23. ACTIVE CONTROL™ Allows you to switch the Active Control™feature on or off. When Active Control™is on, it measures and corrects all incoming signals to provide the best picture-quality settings, controlling Sharpness and Noise Reduction continuously and automatically. The onscreen Active Control™display items cannot be selected. See page 22. USING THE REMOTE CONTROL KEYS

2 Use the cursor in the up/down directions to select a menu item. Note : Sometimes not all the menu items are visible on the screen; press the cursor up/down until you can see the item you desire. 3 Use the cursor in the left/right directions to display the menu and adjust the settings. 4 Press the MENU key to return. 5 Press the m key to switch the menu off. Note : If no action is executed, the menu automatically dis- appears after about 20 seconds. 8 USING THE MENUS : OVERVIEW Selecting the Menu Language Note : The menu languages available vary by model. 1 Press the MENU key. 2 Select INSTALL with the cursor down. 3 Press the cursor right to select LANGUAGE. 4 Press the cursor right again. 5 Select your language with the cursor up/down. From this point on, all onscreen displays will appear in the language that you have chosen. Now you can search for and store the TV channels in two different ways : with Auto Store or Manual Store (tuning in channel by channel). USING THE MENUS : INSTALL • PICTURE BRIGHTNESS • SOUND COLOUR • FEATURES CONTRAST • INSTALL SHARPNESS COLOUR TEMP • PICTURE LANGUAGE • SOUND AUTO STORE • FEATURES MANUAL STORE • INSTALL SORT CHANNEL EDIT INSTALL LANGUAGE • ENGLISH • AUTO STORE B.MELAYU • MANUAL STORE • SORT • CHANNEL EDIT • INSTALL LANGUAGE • ENGLISH • AUTO STORE B.MELAYU • MANUAL STORE • SORT • CHANNEL EDIT • Select menu item Return Switch menu off

1 Select AUTO STORE in the INSTALL menu. 2 Press the cursor right to start the searching. All the TV channels are searched for and stored automatically. 3 When the tuning is completed, press the MENU key to return to the INSTALL menu or press the m key to switch the menu off. Note : Channel numbers will always be written in Latin characters, even when a language that uses other characters has been selected. USING THE MENUS : INSTALL Tuning Channels Manually Manual tuning allows you to store channel by channel. You must go through every step of the manual store menu. 1 Select MANUAL STORE in the INSTALL menu. 2 Press the cursor right to enter the menu. 3 Select COLOUR SYSTEM and press the cursor right. If AUTO is selected, the respective colour system will be automatically selected according to the transmission system. Note : If reception is poor, select another colour system with the cursor up/down. 4 Press the MENU key or the cursor left. 5 Select SOUND SYSTEM and press the cursor right. If AUTO is selected, the respective sound system will be automatically selected according to the transmission system. Note : If the reception is poor, select another sound system with the cursor up/down. 6 Press the MENU key or the cursor left. 7 Select SEARCH and press the cursor left or right to start the searching. Searching stops once a transmitting channel is found. Note : If the reception is poor, select another colour and/or sound system. Continue to the next page. INSTALL • LANGUAGE • AUTO STORE • SEARCH • MANUAL STORE • SORT • CHANNEL EDIT • INSTALL LANGUAGE • AUTO STORE • SEARCHING • MANUAL STORE PLEASE WAIT • SORT CHAN.FOUND 8 • CHANNEL EDIT 048 31 MHZ • • PICTURE BRIGHTNESS • SOUND COLOUR • FEATURES CONTRAST • INSTALL SHARPNESS COLOUR TEMP • PICTURE LANGUAGE • SOUND AUTO STORE • FEATURES MANUAL STORE • INSTALL SORT CHANNEL EDIT INSTALL • LANGUAGE COLOUR SYSTEM • AUTO STORE SOUND SYSTEM • MANUAL STORE SEARCH • SORT CHANNEL • CHANNEL EDIT FINE TUNE • INSTALL MANUAL STORE • COLOUR SYSTEM • SOUND SYSTEM SEARCH • 196.25MHZ • CHANNEL • STORE • INSTALL MANUAL STORE • COLOUR SYSTEM • SOUND SYSTEM SEARCH • 048.31MHZ • CHANNEL • STORE •• •

with the cursor left/right. 10 Press the cursor down. In case of poor reception, you can improve the reception by adjusting the frequency using FINE TUNE. 11 Select FINE TUNE and press the cursor left/right to adjust. 12 In rare cases, certain TV channels may reproduce distorted or unstable pictures. Select PLL (Phase Locked Loop) to switch to the setting 2 with the cursor left/right to restore the picture for the respec- tive transmission. 13 Select STORE. 14 Press the cursor right. The message STORED appears and the search menu item is highlighted again. 15 Now repeat steps 7–14 to continue searching for another transmitting channel. 16 Press the MENU key to return to the INSTALL menu or press the m key to switch the menu off. 10 USING THE MENUS : INSTALL INSTALL MANUAL STORE • COLOUR SYSTEM • SOUND SYSTEM • SEARCH CHANNEL • 18 • STORE • INSTALL MANUAL STORE • SOUND SYSTEM • SEARCH • CHANNEL • STORE G FINE TUNE F • • INSTALL MANUAL STORE • COLOUR SYSTEM • SOUND SYSTEM • SEARCH • CHANNEL G STORE • ‰ • INSTALL MANUAL STORE • COLOUR SYSTEM • SOUND SYSTEM • SEARCH • CHANNEL G STORE • ‰STORED • • • • INSTALL MANUAL STORE • SEARCH • CHANNEL • STORE • FINE TUNE G PLL • 2 ••

TV channels. 1 Select SORT in the INSTALL menu. 2 Press the cursor right to enter the menu. 3 Key in the channel number in the FROM column you want to swap from. Use the digit keys or the cursor left/right. 4 Press the cursor down and select TO. 5 Key in the channel number in the TO column you want to swap to. 6 Press the cursor down and select EXCHANGE. 7 Press the cursor right. The message EXCHANGED appears and the selected channels are exchanged. 8 Repeat steps 3–7 until all TV channels are allocated as you like. 9 Press the MENU key to return to the INSTALL menu or press the m key to switch the menu off. USING THE MENUS : INSTALL INSTALL • LANGUAGE FROM • AUTO STORE TO • MANUAL STORE EXCHANGE • FSORT • CHANNEL EDIT • G G INSTALL SORT G FROM • ‰8 • TO • EXCHANGE INSTALL SORT • FROM G TO • ‰6 • EXCHANGE INSTALL SORT • FROM • TO G EXCHANGE • ‰EXCHANGED INSTALL SORT • FROM • TO G EXCHANGE • ‰

that have bad or weak signals or channels that you do not watch often. Note : Once a channel is skipped, you cannot select it with the CH – or + key. You can only access the channel with the digit keys. 1 Select CHANNEL EDIT in the INSTALL menu. 2 Press the cursor right to enter the channel list. 3 Select the channel you want to skip with the cursor up/down. 4 Press the cursor right to skip the selected channel. The message SKIPPED is displayed. 5 Press the cursor up/down to select another channel and repeat step 4. 6 Press the cursor left or the MENU key to return to the INSTALL menu or the m key to switch the menu off. Note : To add back channels to the list, repeat steps 1–4 and press the m key to switch the menu off. USING THE MENUS : INSTALL INSTALL • LANGUAGE 3 • AUTO STORE 4 • MANUAL STORE 5 • SORT 6 • FCHANNEL EDIT • ‰7 • G G G G INSTALL • LANGUAGE 3 • AUTO STORE 4 • MANUAL STORE 5 • SORT 6 G CHANNEL EDIT • F7 • G G INSTALL • LANGUAGE 3 • AUTO STORE 4 • MANUAL STORE 5 • SORT 6 G CHANNEL EDIT • F7 SKIPPED •

you to enter a name or modify an existing name of a channel, includ- ing peripherals. Note : Even when you have selected another language in the LANGUAGE menu, only the English language character set is offered to enter names to the TV channels stored. 1 Select a TV channel or peripheral you want to assign a name or modify the existing name. 2 Select NAME in the INSTALL menu. 3 Press the cursor right to enter the menu. 4 Key in the selected character with the cursor up/down. 5 Move to the next character with the cursor right and key in the next character. You can key in up to a maximum of five characters. 6 Press the MENU key to store the named channel. USING THE MENUS : INSTALL INSTALL • AUTO STORE • MANUAL STORE • SORT • CHANNEL EDIT G NAME • ‰PERSONAL G G • INSTALL • AUTO STORE • MANUAL STORE • SORT • CHANNEL EDIT G NAME • ‰PERSONAL G G • INSTALL • AUTO STORE • MANUAL STORE • SORT • CHANNEL EDIT G NAME • ‰- G G • INSTALL • AUTO STORE • MANUAL STORE • SORT • CHANNEL EDIT G NAME • ‰CNN G G • INSTALL • AUTO STORE • MANUAL STORE • SORT • CHANNEL EDIT G NAME • ‰PERSONAL G G •

Accessing the Menu 1 Press the MENU key to display the main menu. 2 Select PICTURE. 3 Press the cursor right to access the PICTURE submenu. 4 Use the cursor in the up/down directions to select an item. 5 Use the cursor in the left/right directions to make adjust- ments or settings. 6 Press the MENU key to return or press the m key to switch the menu off. • FPICTURE BRIGHTNESS • SOUND COLOUR • FEATURES CONTRAST • INSTALL SHARPNESS EDIT COLOUR TEMP G G PICTURE G BRIGHTNESS F30 • COLOUR • CONTRAST • SHARPNESS • COLOUR TEMP G G •• PICTURE • COLOUR TEMP CONVERGE RED • DIGITAL OPTIONS CONVERGE BLUE • DYNAMIC CONTRAST MULTIPOINT RED • INTELLISENSE MULTIPOINT BLUE • FMANUAL CONVERGE SAVE MULTIPOINT G •• Select menu item Return Switch menu off Picture Menu Items Brightness Allows you to adjust the brightness levels of the picture. Colour Allows you to adjust the colour saturation of the picture. Contrast Allows you to adjust the contrast levels of the picture. Sharpness Allows you to adjust the edge definition of the picture to improve details. Hue (only with NTSC signals) Allows you to adjust the colour mix of the picture. Colour Temperature Offers the options Normal, Warm, and Cool. Make your selection with the cursor left/right. Normal keeps whites white. Warm makes whites reddish. Cool makes whites bluish. Digital Options Digital Scan eliminates picture flickering and line jitter, offering a stable picture for relaxed viewing (no eye strain). Progressive doubles the number of visible picture lines per field by displaying all picture frame lines at once. This minimizes the visibility of the scan lines. Auto detects the input signal and provides the appropriate mode for the best picture performance. Choose Digital Scan for PAL 50Hz signals and Progressive Scan for NTSC 60Hz signals. Dynamic Contrast Automatically makes the contrast in the darker and the brighter picture areas more noticeable as the image on screen changes. Normally, select MED. In certain circumstances it may be preferable to select MIN, MAX, or OFF. IntelliSense When activated, automatically adjusts picture convergence in 20 seconds or less. Manual Converge Allows you to make additional picture convergence adjustments to suit per- sonal preferences to to further fine-tune the picture. Note : The picture settings Brightness, Colour, Contrast, Sharpness (Hue), and Colour Temperature are stored separately for channels 0–11 and for the external sources. 14

Using Manual Converge : Converge Red/Blue Using the Auto IntelliSense® feature, you can automatically adjust con- vergence in 20 seconds or less (see the previous page). Also, if you desire, you can use the Manual Converge controls to make additional convergence adjustments to suit your personal preferences or to further fine-tune the picture. Note : Allow the TV to warm up for 20 minutes before adjusting conver- gence. 1 Select MANUAL CONVERGE in the PICTURE menu. 2 Press the cursor down and select either CONVERGE RED or CONVERGE BLUE. Note : If various images in the picture have red outlines, select CONVERGE RED. If various images in the picture have blue outlines, select CONVERGE BLUE. 3 Use the cursor right, left, up, or down to adjust the cross hair until the color outline is gone. The adjustment is auto- matically saved in the TV’s memory when you exit the adjust mode. 4 Press the MENU key to return or the m key to switch the menu off. Check the TV picture. If any color outlines remain around the images, use the MULTIPOINT RED (for red outlines) or MULTIPOINT BLUE (for blue outlines) control. See the next section for instructions for using those controls. Converge Red Converge Red PICTURE MANUAL CONVERGE G CONVERGE RED • ‰ • CONVERGE BLUE • MULTIPOINT RED • MULTIPOINT BLUE • SAVE MULTIPOINT ••

Using Manual Converge : Multipoint Red/Blue The Multipoint Red/Blue convergence controls allow you to adjust picture convergence at specific points on the TV screen. Note : Allow the TV to warm up for 20 minutes before adjusting convergence. Adjust Converge Red or Converge Blue before using the Multipoint Red/Blue controls. See the previous page. 1 Select MULTIPOINT RED or MULTIPOINT BLUE in the MANUAL CONVERGE menu. 2 Press the cursor right to enter navigate mode. 3 Use the cursor left, right, up, or down to move to a cross hair that has a color outline. 4 Press the m (Status/Exit) key to enter adjust mode. 5 Use the cursor left, right, up, or down to adjust the cross hair until the color outline is gone. 6 Press the m key to return to navigate mode. 7 Repeat steps 3–6 until all misaligned cross hairs have been adjusted. Then press the MENU key. 8 For your multipoint adjustments to be stored in the TV’s memory, you must activate SAVE MULTIPOINT. Note : If you are not satisfied with the adjustments you just made and want to start over, you can use the UNDO MULTIPOINT control. This control allows you to undo the adjustments, but only if you use it before saving. To save your multipoint adjustments : Select SAVE MULTIPOINT and press the cursor left or right. To undo your multipoint adjustments : Select UNDO MULTIPOINT and press the cursor left or right. To restore the TV’s picture convergence to factory settings, select RESTORE FACTORY and press the cursor left or right. 9 Press the MENU key to return or the m key to switch the menu off. to Navigate EXIT to Adjust SAVE MULTIPOINT UNDO MULTIPOINT OR RESTORE FACTORY PICTURE MANUAL CONVERGE • CONVERGE RED • CONVERGE BLUE G MULTIPOINT RED • ‰ • MULTIPOINT BLUE • SAVE MULTIPOINT •• to Adjust EXIT to Navigate to Navigate EXIT to Adjust to Adjust EXIT to Navigate to Navigate EXIT to Adjust to Adjust EXIT to Navigate PICTURE MANUAL CONVERGE • CONVERGE RED • CONVERGE BLUE G MULTIPOINT RED • ‰ • MULTIPOINT BLUE • SAVE MULTIPOINT •• PICTURE MANUAL CONVERGE • CONVERGE RED • CONVERGE BLUE • MULTIPOINT RED • MULTIPOINT BLUE G SAVE MULTIPOINT • ‰ •• PICTURE MANUAL CONVERGE • CONVERGE RED • CONVERGE BLUE • MULTIPOINT RED • MULTIPOINT BLUE G SAVE MULTIPOINT • ‰ STORED •• PICTURE MANUAL CONVERGE • CONVERGE BLUE • MULTIPOINT RED • MULTIPOINT BLUE • SAVE MULTIPOINT G UNDO MULTIPOINT • ‰ • • PICTURE MANUAL CONVERGE • CONVERGE BLUE • MULTIPOINT RED • MULTIPOINT BLUE • SAVE MULTIPOINT G UNDO MULTIPOINT • ‰ RESTORED • • PICTURE MANUAL CONVERGE • MULTIPOINT RED • MULTIPOINT BLUE • SAVE MULTIPOINT • UNDO MULTIPOINT G RESTORE FACTORY • ‰ •• PICTURE MANUAL CONVERGE • MULTIPOINT RED • MULTIPOINT BLUE • SAVE MULTIPOINT • UNDO MULTIPOINT G RESTORE FACTORY • ‰ RESTORED •• OR

Sound Menu Items Treble Attenuates or amplifies the high-frequency response of the audio out- put signal. Bass Attenuates or amplifies the low-frequency response of the audio out- put signal. Balance Adjusts the balance of the right and left speaker’s sound output. AVL (Automatic Volume Leveller) Automatically controls the volume level to avoid excessive level dif- ferences, especially when switching to another channel or during commercial breaks. Headphone Allows you to adjust the volume and balance of the headphone. 1 Select HEADPHONE. 2 Press the cursor right. 3 Select VOLUME or BALANCE with the cursor up/down. 4 Press the cursor left/right to adjust. 5 Press the MENU key to return. Accessing the Menu 1 Press the MENU key to display the main menu. 2 Select SOUND with the cursor down. 3 Press the cursor right to access the SOUND submenu. 4 Use the cursor in the up/down directions to select an item. 5 Use the cursor in the left/right directions to make adjust- ments or settings. 6 Press the MENU key to return or press the m key to switch the menu off. • FPICTURE BRIGHTNESS • SOUND COLOUR • FEATURES CONTRAST • INSTALL SHARPNESS EDIT COLOUR TEMP G G • PICTURE TREBLE • FSOUND BASS • FEATURES BALANCE • INSTALL AVL EDIT HEADPHONE G G SOUND G TREBLE F 59 • BASS • BALANCE • AVL • HEADPHONE • G G SOUND • BASS • BALANCE • AVL • HEADPHONE G BASS BOOST • F OFF G G • Select menu item Return Switch menu off

Accessing the Menu 1 Press the MENU key to display the main menu. 2 Select FEATURES with the cursor down. 3 Press the cursor right to access the FEATURES submenu. 4 Use the cursor in the up/down directions to select an item. 5 Use the cursor in the left/right directions to make settings. 6 Press the MENU key to return or press the m key to switch the menu off. Activating the Timer The Timer feature allows you to set the timer to switch to another channel at a specified time while you are watching a channel or when the TV is in standby mode. You can also set the TV to switch off automatically at a specific time by setting a Stop Time. 1 Select TIMER in the FEATURES menu. 2 Press the cursor right to enter the Timer. Setting the Timer 1 Press the cursor right again to enter TIME mode. 2 Key in the current time with the digit keys. You must use 24-hour, or military, time. For example : 2:15 p.m. is 14:15. If you entered an incorrect digit : Complete the actual time with arbitrary numbers, then start again. 3 Press the cursor left to exit TIME mode. Continue to the next page. • FPICTURE BRIGHTNESS • SOUND COLOUR • FEATURES CONTRAST • INSTALL SHARPNESS EDIT COLOUR TEMP G G • PICTURE TIMER • SOUND CHILD LOCK • FFEATURES PIP • INSTALL FORMAT EDIT ACTIVE CTRL G G G FEATURES • TIMER • CHILD LOCK • PIP • FORMAT G ACTIVE CTRL • ‰ ON EDIT FEATURES • FTIMER TIME • CHILD LOCK START TIME • PIP STOP TIME • FORMAT CHANNEL E• ACTIVE CTRLDIACTIVATE G FEATURES TIMER G TIME • ‰ --:-- • START TIME • STOP TIME • CHANNEL • ACTIVATE • G G FEATURES TIMER G TIME • ‰ 14:15 • START TIME • STOP TIME • CHANNEL • ACTIVATE • G Select menu item Return Switch menu off

1 Select START TIME with the cursor down. 2 Press the cursor right to enter the START TIME mode. 3 Key in the time you want the programme to be switched on. 4 Press the cursor left to exit START TIME mode. Setting Stop Time 1 Select STOP TIME with the cursor down. 2 Press the cursor right to enter the STOP TIME mode. 3 Key in the time you want the programme to be switched off. 4 Press the cursor left to exit STOP TIME mode. Selecting the Channel 1 Select CHANNEL with the cursor down. 2 Select the channel you want to switch to. Activating the Timer 1 Select ACTIVATE with the cursor down. 2 Press the cursor right to enter the ACTIVATE mode to acti- vate the timer. 3 Using the cursor right, select ONCE or DAILY, according to if you want to activate the timer on the selected channel and the selected time every day or only once. Displaying the Time 1 Select DISPLAY with the cursor down. 2 Press the cursor right to select ON or OFF, according to if you want to display the current time on the TV screen or not. 3 Press the MENU key to return or the m key to switch the menu off. USING THE MENUS : FEATURES FEATURES TIMER • TIME G START TIME • ‰ --:-- • STOP TIME • CHANNEL • ACTIVATE • G G FEATURES TIMER • TIME • ‰ 12:30 G START TIME • ‰ 16:00 • STOP TIME • CHANNEL • ACTIVATE • G FEATURES TIMER • TIME • ‰ 12:30 • START TIME • ‰ 13:30 G STOP TIME • ‰ 18:00 • CHANNEL • ACTIVATE • G FEATURES TIMER • TIME • START TIME G STOP TIME • ‰ --:-- • CHANNEL • ACTIVATE • G G FEATURES TIMER • TIME • START TIME • STOP TIME G CHANNEL • ‰ 3 • ACTIVATE • FEATURES TIMER • TIME • START TIME • STOP TIME G CHANNEL • ‰ 8 • ACTIVATE • FEATURES TIMER • TIME • START TIME • STOP TIME • CHANNEL G ACTIVATE • ‰ OFF • G ACTIVATE • ‰ ONCE OR G ACTIVATE • ‰ DAILY OR FEATURES TIMER • START TIME • STOP TIME • CHANNEL • ACTIVATE G DISPLAY • ‰ ON •

The Child Lock feature allows you to lock channels to prevent chil- dren from watching certain programmes. Entering the Access Code 1 Select CHILD LOCK in the FEATURES menu. 2 Press the cursor right to enter the ACCESS CODE. 3 Key in the access code 0711 (the default access code). A message INCORRECT will appear. 4 Key in access code 0711 a second time. The message CORRECT will appear and make the Child Lock menu accessible. Changing the Access Code 1 Select CHANGE CODE to enter an access code of your choice. 2 Press the cursor right to enter the CHANGE CODE mode. 3 Key in the access code of your choice and confirm it again. The message CORRECT will appear. Activating the Child Lock 1 Select LOCK CHANNEL in the CHILD LOCK menu. Note : Enter the access code if requested. See above. 2 Press the cursor right to enter the LOCK CHANNEL mode. 3 Use the cursor up/down to select the channel you want to lock. 4 Press the cursor right to lock the channel. A keylock symbol will appear beside the locked channel. From now on the locked channel(s) can be accessed only via the remote control. 5 Repeat steps 1–4 to unlock a locked channel. To clear all locked channels at once, select CLEAR ALL in the CHILD LOCK menu and press the cursor right. The message CLEARED will appear. 6 Press the MENU key to return or the m key to switch the menu off. 21 USING THE MENUS : FEATURES FEATURES • TIMER ACCESS CODE • CHILD LOCK - - - - • PIP • FORMAT • ACTIVE CTRL EDIT G G FEATURES • TIMER ACCESS CODE G CHILD LOCK X X X X • PIP INCORRECT • FORMAT • ACTIVE CTRL EDIT G FEATURES • TIMER ACCESS CODE G CHILD LOCK X X X X • PIP CORRECT • FORMAT • ACTIVE CTRL EDIT FEATURES CHILD LOCK • LOCK CHANNEL ENTER G CHANGE CODE • F NEW CODE • CLEAR ALL X X X X FEATURES CHILD LOCK • LOCK CHANNEL CONFIRM G CHANGE CODE • F CODE • CLEAR ALL X X X X FEATURES CHILD LOCK • LOCK CHANNEL CONFIRM G CHANGE CODE • F CODE • CLEAR ALL X X X X CORRECT G FEATURES CHILD LOCK • LOCK CHANNEL ENTER G CHANGE CODE • F NEW CODE • CLEAR ALL - - - - G FEATURES CHILD LOCK G LOCK CHANNEL • F 2 • CHANGE CODE 3 • CLEAR ALL 4 5 6 G FEATURES CHILD LOCK G LOCK CHANNEL • F 3 Ç • CHANGE CODE 4 • CLEAR ALL 5 6 7 G FEATURES CHILD LOCK • LOCK CHANNEL • CHANGE CODE G CLEAR ALL • F 6 G FEATURES CHILD LOCK • LOCK CHANNEL • CHANGE CODE G CLEAR ALL • F CLEARED 6

Should your remote control be lost or broken, you can still change some of the basic picture and sound settings with the keys on the front of the TV. 1 Press the VOL -A and +A keys simultaneously to display/cancel the main menu. 2 Press the CH %fikeys to select a menu item. 3 Press the VOL -A or +A key to display the submenu and adjust the settings. 4 Press the VOL -A and +A keys simultaneously and repeated- ly to return to the main menu or to back out of the menu. When the menu is not being displayed, the CH %fikeys enable you to select TV channels, and the VOL -A and +A keys allow you to adjust the volume. 22 USING THE MENUS : FEATURES Selecting the Screen Format The TV’s Screen Format options allow you flexibility in viewing video sources. Select a screen format using the v or cursor up/down keys or the onscreen menu. To use the onscreen menu : 1 Select FORMAT in the FEATURES menu. 2 Press the cursor right repeatedly to cycle through the differ- ent screen formats and select your desired format. The options vary by input source (see specifics to the right) : • 4:3 format displays the 4:3 picture using the full surface of the screen. • AUTO format make the picture fill the screen as much as possible. • EXPAND 4:3 format expands movie images recorded in the letterbox format. The black bars at the top and bottom of the screen are expanded, thus filling the entire TV screen. • COMPRESS 16:9 allows you to show widescreen, high- definition video sources as they were intended for a more natural picture. Black bars are displayed at the top and bottom of the screen. Switching Active Control™ on Turn Active Control™on using the key or the onscreen menu. To use the onscreen menu : 1 Select ACTIVE CTRL in the FEATURES menu. 2 Press the cursor right to select ON to activate automatic con- trol of Sharpness and Noise Reduction. 3 Press the m key to switch the menu off. G FORMAT • ‰ 4:3 G FORMAT • ‰ AUTO OR G FORMAT • ‰ COMPRESS 16:9 OR OR G FORMAT • ‰ AUTO G FORMAT • ‰ EXPAND 4:3 OR G G FEATURES • TIMER • CHILD LOCK • PIP G FORMAT • ‰ 4:3 • • ACTIVE CTRL For AV1, CVI,AV2, or AV3 Sources : For AV4 and AV5 1080i Sources : For AV4 and AV5 480p Sources : No picture format options are available through the TV. Control the screen format at the source (DVD player or digital set-top box). OR G ACTIVE CTRL • ‰ OFF G G FEATURES • TIMER • CHILD LOCK • PIP • FORMAT G ACTIVE CTRL • ‰ ON EDIT

USING SMART SURF The Program List feature allows you to navigate a list of installed channels, receive a quick overview of those available, and activate the channel you desire. 1 Press the PROGRAM LIST b key. 2 Cursor down to cycle through the list of installed channels and highlight the channel number you want to activate. The appearance of lock symbol means that a channel is blocked by the Child Lock feature. See page 21. 3 Cursor right to activate the channel you have selected. 4 Press the m key to switch the menu off. Adding Channels to the Surf List You can select a list or series of previously viewed channels with the SURF key. This feature allows you to switch between different TV programmes that currently interest you. You can have up to 10 chan- nels in the SURF list. Five channels are shown in the list at one time. Cursor down/up as necessary to see all the channels in the list. 1 Select a channel you want to add to the Surf list. 2 Press the SURF key. 3 Cursor right to add the selected channel to the Surf list. 4 Repeat steps 1–3 to add more channels to the Surf list. 5 Press the m key to switch the menu off. 6 Press the SURF key repeatedly to cycle through channels. Deleting Channels to the Surf List 1 Press the SURF key. 2 Press the SURF key again as many times as necessary to select the channel you want to delete from the Surf list. 3 Cursor right to delete the channel from the list. 4 To delete more channels, repeat the steps above. PROGRAM LIST 7 ACTIO 8 DRAMA 9 VIOLE Ç • ‰10 ROMAN 11 - - - - - 7 SURF • F12 ADD? SURF LIST EMPTY 12 24 SURF • F12 DELETE? SURF 12 • F24 ADD? SURF 12 • F24 DELETE? SURF 8 11 15 4 • F7 DELETE? 24 12

The Smart Picture feature offers you a choice of five picture settings : Personal, Rich, Natural, Soft, and Multimedia. Smart Sound offers you a choice of four sound settings : Personal, Voice, Music, and Theatre. Press the SMART ` Picture or SMART ± Sound key on the remote control repeatedly to cycle through the settings and select your desired mode. Smart Picture ` Options Personal Picture settings are based on your preference. Rich Emphasizes very vibrant colours. This option is desirable for AV mode in a brightly lighted room. Soft Emphasizes “warm” colours. This option is desirable for a dimly lighted room and gives a cinema-like effect when the light is switched off. Multimedia Emphasizes “soft” colours. This option is desirable for playing com- puter games. Smart Sound ± Options Personal Sound settings are based on your preferences. Voice Brings voices to the forefront, emphasizing them. Moves music to the background. Music Emphasizes music over voices. Theatre Provides a balance between voices and music. Note : The PERSONAL settings are the ones that you make using the PICTURE or SOUND menus. These are the only Smart Picture and Smart Sound settings that can be changed. All others are set at the factory. PERSONAL BRIGHTNESS 50 COLOUR 50 CONTRAST 50 SHARPNESS 84 RICH BRIGHTNESS 34 COLOUR 34 CONTRAST 89 SHARPNESS 84 NATURAL BRIGHTNESS 34 COLOUR 34 CONTRAST 78 SHARPNESS 28 SOFT BRIGHTNESS 34 COLOUR 34 CONTRAST 53 SHARPNESS 28 MULTIMEDIA BRIGHTNESS 50 COLOUR 40 CONTRAST 40 SHARPNESS 70 PERSONAL TREBLE 59 BASS 72 VOICE TREBLE 56 BASS 47 MUSIC TREBLE 62 BASS 69 THEATRE TREBLE 59 BASS 72

Have you ever fallen asleep in front of the TV? Using the Sleep Timer, you can program your TV to turn off while you sleep. This feature allows you to set your TV to turn off within a certain amount of time : 15, 30, 45, 60, 90, 120, 180, or 240 minutes. Press the Sleep Timer key on the remote control. The Sleep Timer onscreen display will appear on screen. Then within five seconds, press the Sleep Timer key again as many times as necessary to select the amount of time you want to pass before the TV will turn itself off. An onscreen countdown will appear during the last minute before the TV switches off. Ten seconds before the Sleep Timer switches the TV off, GOOD BYE will be displayed on the TV screen. Notes : • To see how many minutes remain before the TV shuts itself off, press the m key. • Changing the channel or volume during the last minute of a Sleep Timer setting will cancel Sleep. SLEEP OFF SLEEP OFF SLEEP 15 TV SWITCHING OFF 59 TV SWITCHING OFF 9 GOOD BYE The options are 15, 30, 45, 60, 90, 120, 180, or 240 minutes. During the last minute of a Sleep Timer setting, a count- down will be displayed on screen. During the last 10 seconds of a Sleep Timer setting, “GOOD BYE” will be dis- played on screen.

The Picture-in-Picture (PIP) feature allows you to call up a subscreen within your main screen to watch two channels or a channel and a peripheral at the same time. The Dual-window feature allows you to divide the main screen into two subscreens so that two channels or a channel and an external source can be watched simultaneously. 1 Press the n key on the remote control to switch PIP on. 2 Press the n key a second time to change the normal-size PIP screen to a smaller size. 3 Press the n key a third time to switch to the Dual-window screen. 4 To switch PIP off, press the n key a fourth time. Moving the PIP screen Press the o key. Each time you press this key, the PIP window moves to another corner of the main screen. Freezing the PIP screen Press the r key. The picture in the PIP window stands still. Press the r key again to unfreeze the PIP screen. Switching Screens Press the p key. The main screen and the PIP window exchange places. Selecting PIP Channels and External Sources Press the keys PIP CH UP/DN to select a PIP TV channel or external source in ascending or descending order. Selecting Dual Window Channels 1 Press the CH +/– key to cycle through the TV channels in the left picture. 2 Press the PIP CH UP/DN keys to cycle through the chan- nels in the right picture. Adjusting the PIP Hue Setting 1 Select PIP in the FEATURES menu. 2 Press the cursor right to enter the PIP menu. 3 Press the cursor left/right to adjust the HUE setting. 4 Press the MENU key to return or the m key to switch the menu off.

Many TV channels broadcast information via teletext. Each channel that broadcasts teletext transmits a page with information on how to use its teletext system. Look for the teletext page with the main index (usually p. 100). Depending on the TV channel, teletext is transmitted in different sys- tems. The colours used in the options line correspond with the colour keys of your remote control. About Teletext Easy Text considerably reduces the waiting time (on condition that the teletext broadcast of the particular TV channel is received for at least half a minute) by : • a direct selection of previous and following pages that are in trans- mission and of the pages referred to in the options line at the bot- tom of the teletext screen; • a habit watcher list : frequently used pages are put automatically in a list of preferred pages so that they are immediately available; • the precapturing of the page numbers referred to in the displayed page; and • the precapturing of all the subpages. Switching Teletext on and off 1 Press the b key to switch the teletext on. The main index page appears on the screen together with two information lines at the top and one option line at the bottom of the screen. 2 Press the b key again to overlay the teletext page on the TV programme. 3 Press the b key once again to switch the teletext off. Selecting a Teletext Page With the digit keys Enter the desired page number with the digit keys. The page counter seeks the page or the page appears immedi- ately when the page number has been stored in the memory. A message appears when you have entered a nonexistent or incorrect page number. Page numbers beginning with 0 or 9 do not exist. Choose another number. With the option line Use the colour keys—which correspond to the coloured options at the bottom of the screen—to select the desired subject. If the option line is not on the screen, press the selected colour key TWICE. Continue to the next page. Colour keys to select

Quickly Running Through the Teletext Pages Press the cursor up/down or the CH +/– keys to run through the previous or the following pages. Selecting the Index Teletext Page Press the m key to return to the main index (usually p. 100). Selecting Subpages When a selected teletext page consists of different subpages, one of the subpages appears on the screen. Arrows in front of the page number indicate that other sub- pages are available. The other subpages can be selected in two ways : With the cursor left/right The other subpage numbers appear in white as soon as the transmission has found them. They are stored in the memory so that they are available while the teletext page is on screen. Use the cursor left/right to select the previous or the follow- ing subpage. With the y Key • Enter the subpage number yourself : Press y. Enter the desired subpage with the digit keys : for example, 3 for the third page of seven subpages. The TV searches for the selected subpage. • To rotate subpages automatically : Press y again to cancel the entered digit key for the sub- page. Now the subpages rotate automatically. Press y again to select the subpages with the cursor left/right again. Using Special Teletext Functions Enlarge Press h repeatedly to display the upper part and the lower part, and then to return to the normal page size. When the upper part is displayed, you can scroll the text, line by line using the cursor up/down. Reveal Press e to reveal/conceal the hidden information, such as solutions to riddles and puzzles. For future use Cursor to select pages To select pages

VIDEO S-VIDEO L Pb Pr VIDEO S-VIDEO L AUDIO L R AUDIO L R G/Y R/Pr B/Pb V H SYNC L R AUDIO L R AUDIO AV4-480p/1080i-60Hz, 576p-50Hz AV5-RGB, 480p/1080i-60Hz, 576p-50Hz INPUT-AV 2 SUBWOOFER MONITOR OUT INPUT-AV 1 Y AMP SWITCH CENTER CHANNEL AMP INPUT ANTENNA IN 75Ω EXT INT + _ 1 7 3 3 5 5 2 7 4 4 6 REAR OF TV SIDE OF TV G 4 8 5 3 Note : The side panel is AV3. You can connect a wide range of video and audio equipment to your TV in various ways. This page and the next one provide an overview of sig- nal compatibilities and the types of equipment you can connect to the sockets. Connection examples follow on subsequent pages. As necessary, also refer to the handbook for peripheral equipment. Overview : Standard Inputs/Outputs 1 ANTENNA IN 75Ωsocket—compatible with the broadcast stan- dard in your area. Use to connect radio-frequency (RF) signals from VHF/UHF antennas or a cable system. 2 YPbPr (component video input [CVI] sockets)—compatible with 480i and 576i signals. Use to connect equipment having com- ponent video outputs, such as DVD players, laser-disc players, video-game players, satellite receivers, or other equipment. Use the INPUT-AV 1 L(eft) and R(ight) AUDIO sockets for sound connec- tions. 3 S-VIDEO (super video) sockets—compatible with 480i and 576i signals. Use to connect peripherals having Super VHS (S-VHS) outputs, such as VCRs, DVD players, laser-disc players, video- game players, satellite receivers, or other equipment. 4 VIDEO (composite) sockets (INPUT-AV 1, INPUT-AV 2, and TV’s side socket panel [AV3])—compatible with 480i and 576i signals. Use to connect peripherals having composite video outputs, such as VCRs, video- game players, or other equipment. 5 AUDIO inputs (INPUT-AV 1, INPUT-AV 2, and TV’s side socket panel [AV3])—use to connect from the audio output sock- ets on VCRs, DVDs, or other peripherals. 6 MONITOR OUT (VIDEO/AUDIO)—use to connect to a VCR to record programmes from the TV. Or use the AUDIO outputs to connect to an audio hi-fi system. 7 AMP SWITCH, CENTER CHANNELAMP INPUT, and SUBWOOFER Output—use to make optional surround-sound connections. 8 n Headphone socket (stereo, 3.5 mm)—use to connect head- phones for personal listening. The headphone impedance must be between 8 and 4000 Ohms.

VIDEO S-VIDEO L Pb Pr VIDEO S-VIDEO L AUDIO L R AUDIO L R G/Y R/Pr B/Pb V H SYNC L R AUDIO L R AUDIO AV4-480p/1080i-60Hz, 576p-50Hz AV5-RGB, 480p/1080i-60Hz, 576p-50Hz INPUT-AV 2 SUBWOOFER MONITOR OUT INPUT-AV 1 Y AMP SWITCH CENTER CHANNEL AMP INPUT ANTENNA IN 75Ω EXT INT + _ 2 1 REAR OF TV The AV4 and AV5 sockets allow you to connect digital equipment with 1080i/480p (60Hz) or 576p (50Hz) signal output. Overview : High-definition Inputs 1 AV4—use to connect digital equipment with a 1080i/480p (60Hz) or 576p (50Hz) signal output, such as digital set-top boxes or DVD players with progressive-scan capability. You can connect equipment with YPbPr component video or RGB outputs to the AV4 sockets. H and V Sync connections may or may not be required for RGB connections. Use the AV4 L(eft) and R(ight) AUDIO sockets for sound connections. See the handbook for the digital equipment you are connecting. 2 AV5—use to connect digital equipment with a 1080i/480p (60Hz) or 576p (50Hz) signal output, such as digital set-top boxes or DVD players. The AV5 socket accepts a DB15 con- nector. Note, however, that adaptors can also be used to connect from component video output to this DB15 socket. Use the AV5 L(eft) and R(ight) sockets for sound connections. See the handbook for the digital equipment you are connecting.

VIDEO S-VIDEO L Pb Pr VIDEO S-VIDEO L AUDIO L R AUDIO L R G/Y R/Pr B/Pb V H SYNC L R AUDIO L R AUDIO AV4-480p/1080i-60Hz, 576p-50Hz AV5-RGB, 480p/1080i-60Hz, 576p-50Hz INPUT-AV 2 SUBWOOFER MONITOR OUT INPUT-AV 1 Y REAR OF TV AMP SWITCH CENTER CHANNEL AMP INPUT ANTENNA IN 75Ω EXT INT + _ VIDEO S-VIDEO L Pb Pr VIDEO S-VIDEO L AUDIO L R AUDIO L R G/Y R/Pr B/Pb V H SYNC L R AUDIO L R AUDIO AV4-480p/1080i-60Hz, 576p-50Hz AV5-RGB, 480p/1080i-60Hz, 576p-50Hz INPUT-AV 2 SUBWOOFER MONITOR OUT INPUT-AV 1 Y AMP SWITCH CENTER CHANNEL AMP INPUT ANTENNA IN 75Ω EXT INT + _ 2 3 1 VIDEO RECORDER CABLE A/V OUT RF IN RF OUT Video Recorder : Playback 1 Connect the RF cable to the RF socket on your video recorder. 2 Connect another RF cable from the output of your video recorder to the ANTENNA IN 75Ωsocket on your TV. 3 Better playback quality can be obtained if you also connect the Video, Audio Left and Right (only for stereo equipment) cables to the VIDEO and AUDIO L (mono) and R inputs of INPUT-AV 2. Note : In case of mono equipment, only the left loudspeaker reproduces sound. Use a mono-to-stereo adaptor (not supplied) for sound reproduction via the internal loudspeakers. The MONITOR OUT connectors can be used for daisy chain- ing or recording programmes from your TV. See page 32. S-VHS-Video quality with an S-VHS video recorder is obtained by connecting the S-VHS-Video cable with the S-VIDEO input instead of connecting the video recorder to the VIDEO input. See the handbook for the video recorder. If You Do Not Make the Video and Audio Connections in Step 3 Above : Search for and store the test signal of the video recorder. 1 Unplug the RF cable from the RF socket of your video recorder. 2 Switch on your TV and put the video recorder on the test signal or play a prerecorded tape. See the handbook for your video recorder. 3 Search for the test signal of your video recorder in the same way you searched for and stored the TV signals. See pages 9 and 10. 4 Store the test signal under programme number 0 or between 90 and 99. 5 Replace the RF cable in the RF socket of your video recorder after you have stored the test signal.

To record S-VHS quality, connect an S-VHS peripheral directly to the video recorder. Recording a TV Programme 1 Select the channel number on your video recorder. 2 Set your video recorder to record. See the handbook for your video recorder. Switching channel numbers on your TV does not disturb recording. Recording a Programme on Your Video Recorder Connected to MONITOR OUT from Audio/Video Equipment Connected to AV1,AV2, or to the Sockets on the Side of the TV (AV3) 1 Switch on the equipment. 2 Select the correct external source on your TV and on your video recorder. 3 Set your video recorder to record. You record what you are watching on the screen. Do not switch channel numbers and do not switch off your TV when you are recording. CONNECTING PERIPHERAL EQUIPMENT

VIDEO S-VIDEO L Pb Pr VIDEO S-VIDEO L AUDIO L R AUDIO L R G/Y R/Pr B/Pb V H SYNC L R AUDIO L R AUDIO AV4-480p/1080i-60Hz, 576p-50Hz AV5-RGB, 480p/1080i-60Hz, 576p-50Hz INPUT-AV 2 SUBWOOFER MONITOR OUT INPUT-AV 1 Y REAR OF TV AMP SWITCH CENTER CHANNEL AMP INPUT ANTENNA IN 75Ω EXT INT + _ 4 1 VIDEO RECORDER CABLE A/V IN A/V OUT 3 RF OUT RF IN 2 VIDEO S-VIDEO L Pb Pr VIDEO S-VIDEO L AUDIO L R AUDIO L R G/Y R/Pr B/Pb V H SYNC L R AUDIO L R AUDIO AV4-480p/1080i-60Hz, 576p-50Hz AV5-RGB, 480p/1080i-60Hz, 576p-50Hz INPUT-AV 2 SUBWOOFER MONITOR OUT INPUT-AV 1 Y AMP SWITCH CENTER CHANNEL AMP INPUT ANTENNA IN 75Ω EXT INT + _ 5 A/V PERIPHERAL RF IN RF OUT VIDEO S-VIDEO L Pb Pr VIDEO S-VIDEO L AUDIO L R AUDIO L R G/Y R/Pr B/Pb V H SYNC L R AUDIO L R AUDIO AV4-480p/1080i-60Hz, 576p-50Hz AV5-RGB, 480p/1080i-60Hz, 576p-50Hz INPUT-AV 2 SUBWOOFER MONITOR OUT INPUT-AV 1 Y AMP SWITCH CENTER CHANNEL AMP INPUT ANTENNA IN 75Ω EXT INT + _ VIDEO S-VIDEO L Pb Pr VIDEO S-VIDEO L AUDIO L R AUDIO L R G/Y R/Pr B/Pb V H SYNC L R AUDIO L R AUDIO AV4-480p/1080i-60Hz, 576p-50Hz AV5-RGB, 480p/1080i-60Hz, 576p-50Hz INPUT-AV 2 SUBWOOFER MONITOR OUT INPUT-AV 1 Y AMP SWITCH CENTER CHANNEL AMP INPUT ANTENNA IN 75Ω EXT INT + _ 2 1 DVD PLAYER COMPONENT VIDEO OUT A/V OUT REAR OF TV Video Recorder and Other A/V Peripherals 1 Connect the RF cable to the RF socket on your A/V peripheral equipment. 2 To obtain better picture quality, also connect the Video and Audio left and Audio right (only for stereo equipment) cables to the VIDEO and AUDIO L (mono) and AUDIO R input of the INPUT-AV 2 sockets. Note : In case of mono equipment, only the left loudspeaker reproduces sound. Use a mono-to-stereo adaptor (not supplied) for sound reproduction via the internal loudspeakers. 3 Connect the RF output of the A/V peripheral equipment to the RF input on the video recorder. 4 When a video recorder is not connected to MONITOR OUT on your TV, you can record a programme only from the aerial or from the cable system. Only when a video recorder is connected to MONITOR OUT is it possible to record a programme from other equipment con- nected to the TV. See page 32. Connect Video and Audio left (mono) and Audio right cables from the video recorder A/V inputs to the VIDEO and AUDIO L (mono) and AUDIO R sockets of the MONITOR OUT on your TV. 5 Connect from the RF output on the video recorder to the ANTENNA IN 75Ωsocket on your TV. DVD Player Note : Progressive-scan DVD players can be connected to the AV4 or AV5 inputs only. 1 Connect the cables of your DVD player with component video output to the Y-Pb-Pr INPUT-AV 1 sockets on your TV. 2 Connect the cables from the Video and Audio (L and R) outputs on the DVD player to the INPUT-AV 1 VIDEO and AUDIO L (mono) and R inputs on your TV. See the handbook for your DVD player. Note : The names of the component video sockets may differ depending on the DVD player or digital source equipment used. For example, besides YPbPr, you may see R-Y/B-Y/Y or CrCbY. Although abbreviations and terms may vary, the letters B and R stand for the blue and red color component signal con- nectors, respectively. The Y indicates the luminance signal. If necessary, see the handbook for the digital equipment for more information.

VIDEO S-VIDEO L Pb Pr VIDEO S-VIDEO L AUDIO L R AUDIO L R G/Y R/Pr B/Pb V H SYNC L R AUDIO L R AUDIO AV4-480p/1080i-60Hz, 576p-50Hz AV5-RGB, 480p/1080i-60Hz, 576p-50Hz INPUT-AV 2 SUBWOOFER MONITOR OUT INPUT-AV 1 Y AMP SWITCH CENTER CHANNEL AMP INPUT ANTENNA IN 75Ω EXT INT + _ 2 1 DVD PLAYER VIDEO S-VIDEO L Pb Pr VIDEO S-VIDEO L AUDIO L R AUDIO L R G/Y R/Pr B/Pb V H SYNC L R AUDIO L R AUDIO AV4-480p/1080i-60Hz, 576p-50Hz AV5-RGB, 480p/1080i-60Hz, 576p-50Hz INPUT-AV 2 SUBWOOFER MONITOR OUT INPUT-AV 1 Y AMP SWITCH CENTER CHANNEL AMP INPUT ANTENNA IN 75Ω EXT INT + _ S-VIDEO OUT AUDIO OUT REAR OF TV G/Y R/Pr B/Pb V H SYNC L R AUDIO AV4-480p/1080i-60Hz, 576p-50Hz VIDEO S-VIDEO L Pb Pr VIDEO S-VIDEO L AUDIO L R AUDIO L R G/Y R/Pr B/Pb V H SYNC L R AUDIO L R AUDIO AV4-480p/1080i-60Hz, 576p-50Hz AV5-RGB, 480p/1080i-60Hz, 576p-50Hz INPUT-AV 2 SUBWOOFER MONITOR OUT INPUT-AV 1 Y AMP SWITCH CENTER CHANNEL AMP INPUT ANTENNA IN 75Ω EXT INT + _ REAR OF TV L R AUDIO AV5-RGB, 480p/1080i-60Hz, 576p-50Hz VIDEO S-VIDEO L Pb Pr VIDEO S-VIDEO L AUDIO L R AUDIO L R G/Y R/Pr B/Pb V H SYNC L R AUDIO L R AUDIO AV4-480p/1080i-60Hz, 576p-50Hz AV5-RGB, 480p/1080i-60Hz, 576p-50Hz INPUT-AV 2 SUBWOOFER MONITOR OUT INPUT-AV 1 Y AMP SWITCH CENTER CHANNEL AMP INPUT ANTENNA IN 75Ω EXT INT + _ REAR OF TV S-Video Equipment Note : Progressive-scan DVD players can be connected to the AV4 or AV5 inputs only. 1 Connect an S-VIDEO cable to the INPUT-AV 2 S-VIDEO input. 2 Connect the audio cables to the equipment’s AUDIO L (mono) and AUDIO R sockets and to the INPUT-AV 2 AUDIO L (mono) and AUDIO R sockets on your TV. AV4 and AV5 Digital High-definition Inputs When you have digital equipment with 1080i or 480p signal output (60Hz) or 576p signal output (50Hz), connect it to the AV4 or AV5 inputs on your TV. Examples of such equipment are digital set-top boxes and progressive-scan DVD players. Connecting to AV4 Connect digital equipment with component video output (usually labeled Y-Pb-Pr) or with RGB output (phono-type connectors) to the AV4 inputs for video and audio left and right. Also connect to the H and V SYNC inputs on the TV if required for your digital equipment. Note : The AV4 sockets are compatible with some digital equipment hav- ing RGB outputs with “sync on green” or RGB with “separate H and V sync.” Output standards for digital equipment, however, may vary by manufacturer. No industry standards have been established for HD televi- sion RGB signal systems, timing, synchronization, and signal strengths. If the digital equipment you want to connect to your TV offers both compo- nent video and RGB outputs, component video is the suggested connec- tion to use. See the handbook for the digital equipment. Connecting to AV5 Connect digital equipment with RGB or Y-Pb-Pr output to the AV5 inputs for video and audio left and right. A DB15 cable or adaptor cable with a DB15 connector is required. Note : The AV5 input cannot be used to connect a computer or any other VGA device. Notes regarding connecting to either AV4 or AV5 : • For connections to either AV4 or AV5, be sure the TV’s color-space setting matches the output (Y-Pb-Pr or RGB) of the digital equipment you have connected to the AV4 or AV5 inputs. See instructions for setting the TV’s color space on page 37. • See the handbook for the high-definition equipment. • If you notice scrolling images, wrong colors or no color, no picture or even combinations of these on your screen, check to see if the connec- tions have been done properly.

If you would like to hear TV programmes through your audio hi-fi system, your TV offers this capability. 1 Connect the audio cables to the AUDIO L and R input sockets of your amplifier and to the AUDIO L (mono) and R MONITOR OUT sockets of the TV. 2 Turn the TV and audio system on. 3 Control the volume of the hi-fi system at the hi-system’s ampli- fier. Volume adjustments made to the TV do not affect the volume of the hi-fi system. CONNECTING PERIPHERAL EQUIPMENT Camera and Camcorder Connect your camera or camcorder to sockets at the side of your TV. 1 Connect the equipment to the VIDEO or S-VIDEO socket. Note : S-VHS quality with an S-VHS camcorder is obtained by connecting an S-VIDEO cable with the S-VIDEO socket instead of making a connection to the VIDEO socket. 2 Connect the equipment to the AUDIO L socket for mono or both the AUDIO L and R for stereo. Headphone 1 Insert the plug into the headphone socket ; at the right side of the TV. 2 Press H on the remote control to switch off the internal loud- speakers of the TV. Notes : • The headphone impedance must be between 8 and 4000 Ohms. • The headphone socket has a 3.5 mm socket. • In the SOUND menu, select HEADPHONE to adjust the head- phone volume and balance. G TYPICAL CAMCORDER VIDEO S-VIDEO AUDIO L R 1 1 or 2 SIDE OF TV G VIDEO S-VIDEO AUDIO L R 1 SIDE OF TV VIDEO S-VIDEO L Pb Pr VIDEO S-VIDEO L AUDIO L R AUDIO L R G/Y R/Pr B/Pb V H SYNC L R AUDIO L R AUDIO AV4-480p/1080i-60Hz, 576p-50Hz AV5-RGB, 480p/1080i-60Hz, 576p-50Hz INPUT-AV 2 SUBWOOFER MONITOR OUT INPUT-AV 1 Y AMP SWITCH CENTER CHANNEL AMP INPUT ANTENNA IN 75Ω EXT INT + _ VIDEO S-VIDEO L Pb Pr VIDEO S-VIDEO L AUDIO L R AUDIO L R G/Y R/Pr B/Pb V H SYNC L R AUDIO L R AUDIO AV4-480p/1080i-60Hz, 576p-50Hz AV5-RGB, 480p/1080i-60Hz, 576p-50Hz INPUT-AV 2 SUBWOOFER MONITOR OUT INPUT-AV 1 Y AMP SWITCH CENTER CHANNEL AMP INPUT ANTENNA IN 75Ω EXT INT + _ 1 HI-FI AMPLIFIER REAR OF TV

Additional Audio Connections : Surround Sound Your TV has extra sockets that allow you to connect to an external audio amplifier system and powered subwoofer. This connection will provide a surround-sound experience similar to a movie theatre or concert hall. 1 Connect speaker wires from the Center Speakers Output of the surround-sound amplifier to the corresponding (+, –) CENTER CHANNEL AMP INPUT sockets on the TV. 2 Connect audio cables from the AUDIO L and R MONITOR OUT sockets of the TV to the AUDIO L and R inputs sockets on the surround-sound amplifier. 3 Connect speaker wires from the surround-sound amplifier’s front and surround-sound speaker sockets to the front and sur- round-sound speakers. 4 Connect an audio cable from the SUBWOOFER output of the TV to the Low Level Input sockets on the powered subwoofer. 5 Adjust volume for the surround-sound amplifier and powered subwoofer at those pieces of equipment. VIDEO S-VIDEO L Pb Pr VIDEO S-VIDEO L AUDIO L R AUDIO L R G/Y R/Pr B/Pb V H SYNC L R AUDIO L R AUDIO AV4-480p/1080i-60Hz, 576p-50Hz AV5-RGB, 480p/1080i-60Hz, 576p-50Hz INPUT-AV 2 SUBWOOFER MONITOR OUT INPUT-AV 1 Y AMP SWITCH CENTER CHANNEL AMP INPUT ANTENNA IN 75Ω EXT INT + _ VIDEO S-VIDEO L Pb Pr VIDEO S-VIDEO L AUDIO L R AUDIO L R G/Y R/Pr B/Pb V H SYNC L R AUDIO L R AUDIO AV4-480p/1080i-60Hz, 576p-50Hz AV5-RGB, 480p/1080i-60Hz, 576p-50Hz INPUT-AV 2 SUBWOOFER MONITOR OUT INPUT-AV 1 Y AMP SWITCH CENTER CHANNEL AMP INPUT ANTENNA IN 75Ω EXT INT + _ 1 3 3 4 AMPLIFIER POWERED SUBWOOFER 2 REAR OF TV TV (Center Speakers) Front Speaker Front Speaker Powered Subwoofer Rear Speaker Rear Speaker Note: The gray circle indicates the primary viewing area.

Setting the AV4 and AV5 Color Space The term colour space refers to how colours are defined and appear on your TV. When making connections to the AV4 or AV5 sockets, you will need to be sure the TV’s color space is set to match the out- put of the peripheral you have connected. 1 Press the AV key on the remote control as many times as neces- sary to select the high-definition input you desire, AV4 or AV5. 2 Press the MENU key to display the menu. 3 Press the cursor right to enter the INSTALL menu. 4 Cursor down until the high-definition input (AV4 or AV5) is selected. 5 The current colour-space setting appears to the right of AV4 or AV5. To change the setting cursor left or right. 6 Press the m key to switch the menu off. 2 1 AV4 AV5 • PICTURE LANGUAGE • SOUND AUTO STORE • FEATURES MANUAL STORE • ‰INSTALL SORT CHANNEL EDIT G AV4 • ‰RGB OR OR INSTALL • AUTO STORE • MANUAL STORE • SORT • CHANNEL EDIT G AV4 • ‰YPbPr • For AV4: G AV5 • ‰YPbPr OR INSTALL • AUTO STORE • MANUAL STORE • SORT • CHANNEL EDIT G AV5 • ‰RGB • For AV5: 6 3 4 5

Equipment Connected with an Aerial Cable Only Select the channel number under which you have stored the test signal with the digit keys. Equipment Connected to the back or to the side of the TV (AV3) Press the AV key repeatedly to select AV1, CVI, AV2, AV3, AV4, or AV5, according to where you connected your equipment at the back or the side of your TV. Select CVI to view the playback of DVD discs if you used the INPUT- AV 1 component video input sockets (Y-Pb-Pr and AUDIO L [mono] and R inputs). TV Channels Enter the channel number of the TV channel you want to watch with the digit or CH +/– keys.

Do not leave stationary or “letterbox” images on screen for extended periods of time.This can cause uneven picture-tube aging. Normal use of the TV should involve the showing of pictures that contain constantly moving and changing images that fill the screen. Be careful not to leave nonmoving images on screen for extended periods of time or to display the same images on screen too frequently, because subtle ghost images can be left on the picture tubes. Avoid showing the same stationary images more than 15 percent of your total viewing in any one week. Sources of stationary images may be DVD discs, laser discs, video games, CD-i discs, videotapes, digital television boxes, broadcast channels, cable channels, satellite channels, and others. Here are some exam- ples of stationary images (this is not an all-inclusive list; you may encounter others in your viewing) : • DVD menus—listings of DVD disc content • “Letterbox” black borders—black bars shown along the edges of the picture when a widescreen (16:9) movie is played on TV • Video-game images and scoreboards • Television station logos—present a problem if they are bright and stationary; moving or low-contrast graphics are less likely to cause uneven aging of the picture tube • Stock-market tickers—presented at the bottom of the TV screen • Shopping channel logos and pricing displays—bright and shown constantly or repeatedly in the same location on the TV screen. All picture tubes age with use, with their light output diminishing over time. But by maintaining normal use—mixing television picture types—you will create conditions for the tubes to age at an even rate. The result will be a TV picture that is evenly bright over the entire screen. PLACEMENT OF THE TV • See page 4. CLEANING • To avoid possible shock hazard, be sure the TV is unplugged from the electrical outlet before cleaning. • Regularly dust the TV with a dry, nonscratching duster to keep the TV clean. • When cleaning the TV, take care not to scratch or damage the screen surface. Avoid wearing jewelry or using anything abrasive. Do not use household cleaners. Wipe the front screen with a clean cloth dampened with water. Use even, easy, vertical strokes when cleaning. • Gently wipe the cabinet surfaces with a clean cloth or sponge dampened in a solution of cool, clear water and a mild soap or detergent. Use a clean, dry cloth to dry the wiped surfaces. • Occasionally vacuum the ventilation holes or slots in the back cover of the set. • Never use thinners, insecticide sprays, or other chemicals on or near the cabinet, as they might cause permanent marring of the cabinet finish. TIPS • Do not leave your set on standby mode for a prolonged period of time. Switch the set off to allow it to be demagnetised. A demagnetised set supports good picture quality. • Do not shift or move the set around when it is switched on. Unevenness in colour in some parts of the screen may occur. END-OF-LIFE DISPOSAL OF THE TV Philips is paying much attention to making its products environmentally friendly. Your new TV contains materials that can be recy- cled and reused. Specialised companies can dismantle your discarded TV at the end of its life, concentrating on the reusable materi- als and minimising the amount of materials to be disposed. Please be sure to dispose of your old TV according to local regulations. DISPOSAL OF EXHAUSTED BATTERIES The batteries supplied do not contain the heavy metals mercury and cadmium. Nevertheless, in many countries exhausted batteries may not be disposed of with your household waste. Please ensure you dispose of exhausted batteries according to local regulations. CARE, CLEANING, AND TIPS

m o t p m y S o d o t t a h W TV remote control does not work • Check that the batteries are installed correctly. • Replace the batteries, if necessary. • Clean the remote control and the remote-sensor window on the TV. • Be no farther than 6 meters from the TV when using the remote control and aim the remote toward the TV’s remote-sensor window. • If the remote still will not work, use the keys on the TV. No power • Check that the TV’s power cord is plugged into the mains socket. If there is still no power, discon- nect the plug. Wait for 60 seconds and reinsert the plug and then switch on the TV again. • See if the outlet is controlled by a wall switch. • If you are using an AC power strip, be sure the fuse on the power strip is not blown. No picture • Check the antenna connection at the rear of the TV to see if it is properly connected to the TV input terminal. • The broadcast station may be experiencing difficulty. Try another channel. • Adjust the contrast and brightness settings or select another picture setting with the Smart Picture key on the remote control. • If using peripheral equipment through the A/V inputs, be sure it is properly connected. • Be sure you have selected the correct signal source for viewing. • If you are attempting to view a picture from a progressive-scan-capable DVD player connected to the AV4 or AV5 sockets, be sure you have switched the DVD player to progressive-scan mode. • If you are using an HD receiver, be sure its output is set correctly (to HD or SD), based on the connection to the TV you have made. Snowish picture and noise • Check the antenna connection. Colour patch (unevenness) • Switch off the TV by the mains power key. Wait for 20 minutes before switching on again. • Be sure you have made connections correctly. • If you have connected digital equipment to the AV4 or AV5 sockets, check the colour-space setting on the equipment or TV and change the setting on either if necessary. • Check to be sure the TV is not placed too near speakers or magnetic objects. • Adjust the TV’s convergence. Horizontal dotted lines • This may be caused by electrical interference from appliances such as hair dryers or vacuum cleaners or other sources such as neon lights. Turn off the appliance or move the TV. One white line across the screen • Switch the TV off immediately and consult a qualified service person. Good picture but no sound • Increase the volume. • Check that the TV is not muted; press the H key on the remote control. • When no signal is detected, the TV automatically switches off the sound. This is proper operation and does not indicate a malfunction. • Check the transmission system’s sound settings on the set. Good sound but poor colour or no picture • Adjust the contrast and brightness setting or select another picture setting with the Smart Picture key on the remote control. • Check the transmission system’s colour settings on this set. Poor picture • Poor picture quality sometimes occurs when an S-VHS camera or camcorder has been connected to the side panel (AV3) of the TV when another peripheral is connected to AV1 or AV2 simultane- ously. In this case, switch off one of the other peripherals. Double images or “ghost” images • High-rise building or hills may be obstructing reception. Try using a highly directional antenna to improve the picture. NICAM sound distortion (crackling noise) • This could be due to antenna siting or reflected signal. • Switch over to “MONO” by pressing the I-II key on the remote control. If your problem is not solved, switch the TV off and then back on again once. Never attempt to repair a defective TV yourself. Check with your dealer or call a TV technician.

automatic tuning of channels, 9 b bilingual broadcast (I-II key), 7 c camcorder, 35 child lock, 21 d dolby* virtual, 6 dual window, 26 DVD, 33–34 dynamic contrast, 14 e editing channels, 12 f freeze, 7, 26 frequency, 10 h headphone, 35 hue, 14 i information on screen (i+ key), 6 interrupt the sound (mute key), 7 m manual installation, 9–10 menu language, 8 n naming channels, 13 p picture adjustments, 14 picture-in-picture (pip), 26 pip position, 26 r recording, 32–33 s screen format, 22 sleeptimer, 25 smart picture and smart sound, 24 sorting channels, 11 sound adjustments, 18 stereo (I-II key), 7 storing TV channels, 9–10 S-VHS, 32, 35 Switching the TV on, 4 t teletext, 27–28 troubleshooting (before calling service), 40 v video recorder, 31–33 volume, 6 *Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

Picture • Picture screen diameter : 109 cm (43 in.) • Visible screen size : 109 cm (43 in.) • 100Hz digital scan* • Progressive scan* • Digital comb filter • Dynamic contrast • Colour enhancements : green/blue stretch • Digital colour transient improvement (CTI) • Digital histogram • Active Control™ – Auto Sharpness – Auto Dynamic Noise Reduction • Digital Noise Reduction (DNR) • Tint control (three modes) Sound • Dolby** Virtual Surround processing • Incredible Surround™ • Speakers : 5 cm x 5 cm (2 in. x 2 in.) tweeter 5 cm x 12.7 cm (2 in. x 5 in.) woofer • Smart Sound (four modes) :Theatre,Voice, Music, Personal • Stereo : digital NICAM • Sound output : 2 x 15 W, 50Hz–10 kHz at 5% THD (flat response) 8-ohm load • Bass Boost • Center channel input • Subwoofer out Ease of Use • Smart Picture (five modes) • Smart Sound (four modes) • Multi-language onscreen display and menu control • Sleeptimer and Timer • Childlock • 100 presets • Favorite Programme List • Remote control Connectivity • Rear : Monitor OUTPUT—CVBS and audio L/R INPUT-AV 1—CVBS, S-Video and audio L/R Component video input (CVI)—YPbPr and audio L/R INPUT-AV 2—CVBS, S-Video, and audio L/R AV 4—YPbPr (or RGB+HV) accepting 1080i and 480p (60Hz), 576p (50Hz); and audio L/R AV 5—RGB (or YPbPr with adaptor) DB15 accepting 1080i and 480p (60Hz), 576p (50Hz); and audio L/R ANTENNA IN 75Ω—coaxial CENTER CHANNEL AMP INPUT and AMP SWITCH SUBWOOFER output • Side :AV3—CVBS, S-Video, and Audio L/R; stereo headphone out (3.5 mm socket) Reception • Tuning system : PLL • Color transmission system (off-air) : PAL B/G/I/D/K, SECAM B/G/D/K, NTSC M • A/V connections : NTSC 3.58/4.43, PAL60 • Stereo sound transmissions systems (off-air) : NICAM B/G/I/D/K, 2CS B/G/D/K • Channel selections :VHF, UHF, S-channels, hyperband Miscellaneous • Ambient temperature : +5/+45ºC • Operation voltage, frequency : refer to the specification at the back of the TV set • Power consumption : refer to the specification at the back of the TV set • Product dimensions : 96.1 cm (W) x 53.1 cm (D) x 114.6 cm (H) • Product weight : 57 kg (125 lb) • Carton dimensions : 106 cm (W) x 62 cm (D) x 125 cm (H) • Carton weight : 8 kg (181 lb) These technical specifications are subject to change without notice. *The options of Auto, Progressive, Digital Scan, or 100Hz can be selected in the TV’s onscreen Picture menu through the Digital Options item. **Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

This product is guaranteed by Philips for a period of one year after the date of purchase against defects due to faulty workmanship or materials.The guarantee covers both parts and labour. Service under guarantee is only provided upon presentation of reasonable evidence (e.g., completed guarantee card or purchase receipts) that the date of the claim is within the guarantee period. The guarantee is not valid if the defect is due to accidental damage (including in transport), misuse or neglect and in case of alter- ations or repair carried out by unauthorised persons. The guarantee may not apply if the product requires modifications or adaptation to enable it to operate in any country other than the country for which it was designed, manufactured, approved and/or authorised or if any damage results from these modifica- tions. Service (during and after guarantee) is available in all countries where this product is officially distributed by Philips. In countries where Philips does not distribute the product, the local Philips Service organisation will also provide service, although there may be a delay if the appropriate spare parts and technical manual are not readily available. These statements do not affect your statutory rights as a consumer. In the event of difficulty, please contact the Philips Information Centre in any country (see enclosed addresses). CONDICIONES DE GARANTIAS INTERNATIONALES Philips garantiza este producto durante 1 año, a partir de la fecha de adquisición, contra defectos debidos a una imper- fecta fabricación o malos materiales. Esta garantía cubre tanto las piezas de recambio como la mano de obra. Las reparaciónes que pudieran producírse durante el período de vigencia de la presente garantía se efectuarán solo si presenta una razonable evidencia (por ejemplo, mediante la presente garantía, debidamente cumplimentada, o la factura de compra), de que la fecha de la queja está dentro del período de garantía. Esta garantía no tendrá validez si el defecto es debido a un deterioro accidental; un uso inadecuado o un mal trato y en el caso de modificaciónes o reparaciónes efectuadas por personal no autorizado. El servicio (durante y despues de la garantía) está disponible en todos los países donde el producto es ofícialmente distribuido por Philips. En países donde Philips no distribuya el producto, la organización local de Servicio Philips dará también el servicio necesario, aunque puede producirse una demora si los adecuados recambios no están fácilmente disponibles. En todo caso, el titular de la garantía tiene todos los derechos mínimos reconocidos por la Ley. En el caso de cualquier dificultad, por favor dirijase al : Centro de Information al Consumidor (vease lista adjunta).

Triesterstrasze 64 A-1100 Wien Phone (01) 0660/6201 Fax (01) 60101 1312 BELGIUM Philips Consumer Products Léon Grosjeanlaan 2 B-1140 Brussel Phone (02) 702 03 03 Fax (02) 702 02 60 GERMANY Philips Infocenter Consumer Electronics Alexanderstraße 1 D-20099 Hamburg Phone (0180) 535 6767 Fax (040) 2852 2310 Datex J*32400# DENMARK Philips Konsument Elektronik A/S Philips Kundecenter Prags Boulevard 80 DK-2300 København. S. Phone 3288 3200 Fax 3288 3908 FINLAND Philipsin Asiakaspalvelu Sinikalliontie 3 P.O. Box 75 SF-02630 Espoo Phone (90) 61580 230 Fax (90) 61580 910 FRANCE Service Consommateurs Philips Rue des Vieilles Vignes Croissy Beaubourg B.P. 49 F-77423 Marne la Vallée, Cedex 2 Phone (01) 64805454 Fax (01) 64613348 GREECE Philips S.A. Hellenique 25th March Street 15 P.O. Box 3153 G-10210 Athens Phone (01) 4894301 880 Fax (01) 4894344 IRELAND Philips Electronics Ireland Ltd Newstead Clonskeagh Dublin 14 Phone (01) 7640000 Fax (01) 7640175 ITALY Philips S.P.A. Servicio Consumatori Philips Piazza IV Novembre, 3 I-20124 Milano Phone 167 820026 (linea verde) Fax (02) 67522660 LUXEMBURG Philips Luxemburg S.A. 19-21, rte. d’Arlon L-8001 Strassen Phone 44 38 38 1 Fax 45 39 88 the NETHERLANDS Philips Consumenten Belangen Antwoordnummer 500 NL-5600VB Eindhoven Phone 06 8406 Fax (040) 2785187 NORWAY Norsk A/S Philips Philips Kundetjenste Sandstuveien 70 Postboks 1 Manglerud N-0680 Oslo 6 Phone (022) 748250 Fax (022) 748511 PORTUGAL Centro de Informação aos Consumidores Estrada da Outurela 118 P-2795 Carnaxide Lisboa Phone (01) 416 30 63 / 416 69 61 Fax (01) 416 30 73 SPAIN Philips Servicio Atención al Cliente Bernardino Obregón, 26 E-28012 Madrid Phone (91) 5300777 Fax (91) 4678925 SWEDEN Philips Kundtjänst Kottbygatan 7.Kista S-16485 Stockholm Phone (08) 632 2250 Fax (08) 632 2771 SWITZERLAND Philips Info Centre c/o SERLOG Servizio + Logistica S.A. Fegistrasze 5 CH-8957 Spreitenbach Phone (056) 4177270 Fax (056) 4177575 CONSUMER INFORMATION CENTRES

UNITED KINGDOM Philips Consumer Helpdesk P.O. Box 298 420 London Road Croydon-Surrey CR9 3QR Phone (0181) 665 6350 Fax (0181) 6894312 EASTERN EUROPE CZECH REPUBLIC Philips Service V Mezihorí 2 180 00 Prage Phone (02) 6831581 Fax (02) 66310852 HUNGARY Philips Markaszerviz Kinizsi U 30-36 Budapest 1092 Phone (01) 2164428 Fax (01) 2187885 POLAND Philips Polska CE UL. Marszalkowska 45/49 00-648 Warszawa Phone (02) 6286070 Fax (02) 6288228 RUSSIA Philips Representation Office UI. Usacheva 35A 119048 Moscow Phone (095) 247 9125 Fax (095) 247 9134 TURKEY Türk Philips Ticaret A.S. Talatpasa Caddesi No 5 80640-Gültepe/Istanbul Phone (0800) 211 40 36 Fax (0212) 281 18 09 LATIN AMERICA ANTILLES Philips Antillana N.V. Kaminda A.J.E. Kusters 4 Zeelandia P.O. Box 3523-3051 Willemstad, Curacao Phone (09) 612799 Fax (09) 612772 ARGENTINA Philips Argentina S.A. Centro de Información al Usarío Vedia 3892 1430-Buenos Aires Phone (01) 5442047 Fax (01) 5452928 BRASIL Philips da Amazona Indústria Electrônica Ltda. Rua Jacerú, 151-Brooklin 04705-000 Sao Paulo-SP. Phone 800123123 Fax (011- 5315973 CHILI Philips Chilena S.A. Avenida Santa Maria 0760 P.O. Box 2687 Santiago de Chile Phone (02) 730 2000 Fax (02)777 6730 COLOMBIA Industrias Philips de Colombia S.A. Division de Servicio Calle 13, No 51-39 Apartado 4282, Bogota Phone (01) 2600600 9800 18971 (toll free) Fax (01) 2616308 MEXICO Consumer Information Centre Norte 45 No. 669 Col. Industrial Vallejo C.P. 02300-Mexico, D.F. Phone (05) 3687788/9180050462 Fax (05) 7284272 PARAGUAY Philips del Paraguya S.A. Avenida Artigas 1519 Casilla de Correos 605 Asuncion Phone (021) 211666 Fax (021) 213007 PERU Philips Peruana S.A. Customer Desk Comandante Espinar 719 Casilla 1841 Lima. 18 Phone (014) 479783 Fax (014) 468949 URUGUAY Ind. Philips del Uruguay S.A. Avenida Uruguay 1287 Customer Help Desk 11100 Montevideo Phone (02) 923392 Fax (02) 920752

Apartado Postal 1167 Caracas 1010-A Phone (02) 2377575 Fax (02) 2376420 NORTH AMERICA CANADA Consumer Service Division 4977 Levy Street Ville St. Laurent Quebec H4R2N9 Phone (514) 9560120 Fax (514) 9560828 USA Philips Consumer Electronics P.O. Box 520890 Miami, FL 33152 Phone : (402) 536-4171 PACIFIC AUSTRALIA Philips Consumer Service Customer Information Centre 3 Figtree Drive Homebush Bay NSW 2140 Phone (02) 131124 Fax (02) 7467970 NEW ZEALAND Philips New Zealand Ltd. Consumer Help Desk 2 Wagener Place Mt.Albert P.O. Box 1041 Auckland Phone 0800 658 224 (toll free) Fax (09) 849 7858 ASIA BANGLADESH Philips Service Centre 100 Kazi Nazrul Islam Avenue Kawran Bazar C/A Dhaka-1215 Phone (02) 812909 Fax (02) 813062 CHINA Philips Service Logistic Centre 385 Hong Cao Road Shanghai 200233 Phone (021) 4726839 Fax (021) 4726843 Philips Authorized Service Centre 801 Dong Feng Road East Guangzhou 510080 Phone (020) 7766990 Fax (020) 7766990 Philips Authorized Service Centre Bejing Jing Pu Elec. Service Station 6/F Guo Hu Department Store Xan Wu Men West Street Bejing 100053 Phone (01) 3021589 Fax (01) 3021589 Philips Authorized Service Centre 148 Fu Jian Road M. Shanghai 200001 Phone (021) 3281005/38275 Fax (021) 3281005 HONG KONG Philips Electronics Hong Kong Limited Consumer Service 10/F., Flat A, Park Sun Building 103-107 Wo Yi Hop Road Kwai Chung, N.T. Phone 2619-9663 Fax 2485-3574 INDIA Philips India Consumer Relation Centre Bandbox House 254-D Dr.A. Besant Road Worli Bombay 400 025 Phone (022) 4926611 Fax (022) 4941698 Consumer Relation Centre 7 Justice Chandra Madhab Road Calcutta 700 020 Phone (033) 747333 Fax (033) 4753839 INDONESIA P.T. Philips Development Corporation Consumer Electronics Service Philips House 5th floor, JI. HR. Rasuna Said Kav. 3-4 Jakarta 12950 Phone (021) 5201122 Fax (021) 5205190 CONSUMER INFORMATION CENTRES

JAPAN Philips Consumer Electronics 1-11-9, Ebisuminami Shibuya-Ku Tokyo 150 Phone (03) 3719 2235 Fax (03) 3715 9992 KOREA Philips Korea Ltd. - Philips House C.P.O. Box 3680 260-199 Itaewon-Dong Yongsan-Ku Seoul 140-202 Phone (02) 5961195/1196 (02) 5967632/76325 Fax (02) 5959688 MALAYSIA Philips Malaysia Sdn. Berhad Service Dept. No.51, sect. 13 Jalan University 4620 Petaling Jaya, Selangor P.O. Box 12163 50768 Kuala Lumpur Phone (03) 7562144 Fax (03) 7560761 PAKISTAN Philips Electr. Ind. of Pakistan Ltd. Service Centre Mubarak Manzil 39 Garden Road Karachi-3 Phone (021) 7737411 16 Fax (021) 7726504 Philips Consumer Service Centre 168-F Adamjee Road Rawalpindi Cantt. Phone (051) 580902 3 Fax (051) 584944 PHILIPPINES Philips Electronics and Lighting Inc. 106 Valero St. Salcedo-Village Makati, Metro Manilla Phone (02) 8100161 Fax (02) 8173474 SINGAPORE Philips Singapore Private Ltd. Consumer Service Dept. Lorong 1,Toa Payoh P.O. Box 340 Singapore 319762 Phone 3502000 Fax 2508037 TAIWAN Philips Taiwan Ltd. Consumer Products Division 4F-1, 5, Lane 768, Pateh Rd, Sec 4 P.O. Box 22978 Taipei Phone (02) 7882856 Fax (02) 7882851 THAILAND Philips Electronics (Thailand) Ltd. Philips Service Centre 209/2 Sanpavut Road Bangna Bangkok 10260 Phone (02) 3980141/3980790 Fax (02) 3983319 AFRICA MOROCCO Philips Electronique Maroc. 304, BD Mohamed V. Casablanca Phone (02) 302992 Fax (02) 303446 SOUTH AFRICA South Africa Philips S.V. Div. 195 Main R.D. Martindale Johannesburg P.O. Box 58088 Newville 2114 Phone (011) 4705911 Fax (011) 4705250 MIDDLE EAST Philips Export B.V. P.O. Box 17078 Jebel Ali Dubai United Arab Emirates Phone (04) 313377 Fax (04) 836128