Philips DTR2530 Operation & User’s Manual

1 Important 4 2 Your Digital Terrestrial Receiver 6 2.1 What’s in the box? 6 2.2 What you also need 7 2.3 Digital Terrestrial Receiver overview 7 2.4 Main menu overview 8 2.5 How to read this manual 8 3 Getting started 8 3.1 Prepare 8 3.2 Connect 9 3.3 Install 10 4 Using your Digital Terrestrial Receiver 11 4.1 Watching live TV 11 4.2 Using options 13 4.3 Settings 13 4.4 Video Settings 13 4.5 Language Settings 15 4.6 Menu Settings 15 4.7 Miscellaneous Settings 16 4.8 Restore Factory Settings 16 5 Use more of your Digital Terrestrial Receiver 17 5.1 Digital Terrestrial Receiver full overview 17 5.2 Remote control full overview 18 5.3 Using channel list 19 5.4 Creating and Editing channel list 19 5.5 Extended installation 21 5.6 EPG 22 5.7 Timer 23 5.8 Miscellaneous functions 24 5.9 Radio 25 5.10 Security 25 6 Maintenance 26 6.1 Cleaning 26 6.2 Replacement 26 6.3 Disposal 26 7 Accessories and connections 27 7.1 Recorder connection 27 7.2 Audio connection 27 8 Guarantee and service 28 9 Technical data 29 10 Frequently asked questions 30 Contact information 31 Trademarks and partner logos 31

It contains important information and notes regarding how to operate it. Disposal of your old product Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product or its packaging, it means the product is covered by European Directive 2002/96/EC. Please inform yourself about the local separate collection process for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. The correct disposal of your old product will help prevent potential negative consequences for the environment and human health. The “Material recyclability symbol” affi xed on package cardboard and user manual means these parts are recyclable. So do not dispose of them with your normal household waste. The “Material recyclability symbol” affi xed on plastic packaging parts means these parts are recyclable. So do not dispose of them with your normal household waste. The “Green Dot” affi xed on cardboard means PHILIPS pays a fi nancial duty to the “Avoidance and Recovery of Packaging Waste” organization.

manufactured to meet the appropriate safety standards, but the instructions below must be followed to operate it safely. These instructions must be kept for future reference. Danger The Digital Terrestrial Receiver and AC adaptor do not contain any user-serviceable parts. Do not • attempt to open them. All maintenance work must be carried out by qualifi ed services centres. Make sure that children do not place any foreign objects in any of the openings. • Warnings Before connecting the AC adaptor to the mains, check that the mains supply voltage corresponds • to the voltage printed on it. If the mains voltage is different, consult your dealer. The AC adaptor has been designed for indoor use only. • Is it recommended to unplug the AC adaptor from the mains during lightning storms. • Periodically inspect the AC adaptor for damage. Do not use if damage is found. Always refer to • qualifi ed services centres. To prevent fi re or shock hazard, do not expose the Digital Terrestrial Receiver to rain or moisture. • The Digital Terrestrial Receiver should be placed on a fi rm surface, and the ventilation openings • must not be covered with items, such as newspapers, table clothes, curtains, etc. Do not install the Digital Terrestrial Receiver near heat sources such as radiators, stoves or other • apparatus that produce heat. Protect it from direct sunlight. When installing the Digital Terrestrial Receiver, ensure there is a gap of approximately 5 cm • around the Digital Terrestrial Receiver to enable air to circulate freely and prevent overheating. Leave accessible the AC adaptor in case emergency shutdown is required. • Do not place any combustible objects on the Digital Terrestrial Receiver (candles, etc.). • No objects fi lled with liquids, such as vases, shall be placed on the unit. The Digital Terrestrial • Receiver shall not be exposed to dripping or splashing. Should this happen, disconnect the AC adaptor from the mains and consult qualifi ed services centres. Refer also to the cautions throughout this manual.

6 SCART cable AC Adaptor Leafl et Smart card Caution Plastic bags can be dangerous. To avoid suffocation keep the bag away from babies and children. Your Digital Terrestrial 2 Receiver Thank you for purchasing this product which has been designed and manufactured to give you many years of trouble-free service. What’s in the box? 2.1 Digital Terrestrial Receiver User manual Remote control and 2 batteries

ENGLISH What you also need 2.2 Coaxial cable Digital Terrestrial Receiver overview 2.3 Main Unit Main unit backside Remote control unit Main unit A IR Receiver B Status led C Smart Card slot Main unit backside A TV* B VCR* C SPDIF* (optical) D L/R AUDIO OUT* (analogue) E RF IN* F RF OUT* G Power* * Safety extra low voltage Remote control unit A Standby B Navigation keys C Volume/channel control D Alphanumeric keypad A C B A B C D E F G A B C D

2.4 Press the MENU key to access the main menu. Use the arrow keys / to navigate through the different options. Press OK to validate your choice. Note For menu full overview, see chapter 5. How to read this manual 2.5 This User Manual contains all informations you need to: Set up all the available channels • Use correctly your Digital Terrestrial • Receiver Each symbol below has a specifi c meaning. Danger Describes situations of injury or loss of life. Warning Describes actions that may cause damage to the product. Caution Describes the actions required to avoid dangerous or illegal situations. Note Additional information. Tip Information that is useful to know but not essential to the task. For example, information about alternative use. Getting started 3 In this chapter, the basic steps to get you started are described. Prepare 3.1 Prepare the remote control Open the battery compartment. Insert the two batteries supplied according to the indications (+/-) inside the compartment.

Make sure all the devices are disconnected from the mains before making any connections. SCART connection Connect the aerial cable from the wall socket to the RF IN socket at the rear of the Digital Terrestrial Receiver. Connect the RF OUT socket at the rear of the Digital Terrestrial Receiver to the RF input of your TV set using a coaxial cable. Connect the supplied scart cable to the scart input of the TV set and to the TV scart socket at the rear of the Digital Terrestrial Receiver. Plug your Digital Terrestrial Receiver to the mains using the supplied power adaptor. Close the battery compartment. Note Point the remote control directly at the remote sensor on the front panel and select the desired function. Caution Do not mix batteries or keep them in the remote control for long periods of time without use. Batteries must not be disposed of with your household waste but to a local separate battery collection system. Do not dispose of batteries in a fi re. Insert the Smart card To insert the smart card: Open the smart card door on the right • side of the front panel. Insert the smart card into the smart card • slot as far as it will go. The end of the card will be visible from outside the slot. Warning Insert the Smart card with the chip facing down.

seconds to switch the receiver on. The receiver is on: the LED is green. The receiver is in standby mode: the LED is red. During a software loading: the LED is blinking. At the fi rst installation, the First Time Installation window appears: Highlight the Country fi eld using the arrow key . Select the desired language using the arrow key or . Note Read the information messages displayed on the screen. They will help you to set the correct values. Highlight Postcode using the arrow key . Press OK and enter your postcode. Then successively set the desired values. In doing so, observe the following: By using the arrow key • or , you switch between the individual setting possibilities. By using the arrow key • or , you change the displayed values. • Then highlight the OK fi eld using the arrow key , and press OK. The Automatic Search window is displayed: If desired, change the values for the Start and End Frequency using the arrow key or . Note The displayed values for the Start and End Frequency can normally be maintained. Using the arrow key or , you defi ne the channels to be searched for: All channels or channels that are Free to air only. Then highlight the OK fi eld using the arrow key , and press OK to start the channel search. The window displayed provides information on the progress of the channel search. Note: By pressing EXIT, you can stop the scan mode at any time.

ENGLISH Using your Digital 4 Terrestrial Receiver Once you have connected your Digital Terrestrial Receiver, use the remote control to operate the basic, frequently-used functions, such as switching on and off, changing channels and altering the volume. Watching live TV 4.1 Digital Terrestrial Receiver wake-up To wake up your Digital Terrestrial Receiver from standby, press one of the following keys and wait a few seconds: • on the remote control P+/P- • on the remote control Any numerical key of the remote control • Note In order to reduce power consumption, switch your Digital Terrestrial Receiver to standby mode whenever you are not using it. For maximum energy saving we recommend you to switch off the Digital Terrestrial Receiver by unplugging the AC adaptor of the Digital Terrestrial Receiver if you are not using it for a long time. Channel selection To change channels, use P+/P- or the numerical keys of the remote control. Press P

12 Volume Control To decrease or increase the volume level, use the volume keys VOL +/-. A change of volume is shown on-screen using a bar graph. To mute the sound, press the key. The icon in the bar graph indicates audio mute. This icon disappears after a few seconds. To restore the sound, press the key again or the volume keys VOL +/-. Note The volume level is controlled from your TV set. It can also be controlled using your TV remote control. Displaying information banner Every time you change channels, the information banner is displayed. To display the banner anytime, press INFO. To exit it, press EXIT. The information banner displays the selected channel memory number and the channel name. In addition, the time is displayed on the lower left edge of the information banner. The display bar on the right next to the time graphically indicates the programme time that has already elapsed. The lower menu line displays the current and the next programme including its broadcasting time. After a few seconds, the information banner is automatically hidden. Note You can defi ne the display time of the information banner for yourself or completely prevent the automatic display. To do so, see the Menu settings chapter. Extended information banner While the information banner is displayed on the lower screen edge, you can call up the extended information banner by pressing the INFO key again. The extended information banner supplies further details with regard to the current programme. Notes If the text is more extensive, it is • distributed to several pages. By repeatedly pressing the OK key, you browse the next pages (arrow keys and are also possible). If you press the • INFO or arrow key , information on the next programme is displayed. By pressing the arrow key , you return to the information on the current programme. Note The extended information banner is not automatically closed. Press the EXIT key in order to close the extended information banner.

ENGLISH Highlight the desired option using or . Press OK. Notes In any case, observe the information text • displayed on the bottom of the screen. It will help you to select the correct settings. Selecting and altering the settings is • respectively effected by means of the arrow keys / and / . A pop-up window can be closed by • pressing the EXIT key Video Settings 4.4 The video displayed on the TV depends on: Screen format • Digital Terrestrial Receiver setting • Broadcast content format setting • Screen Format You can select screen format according to the TV you have: 16:9 / Widescreen TV format • 4:3 format • Using options 4.2 Some channels occasionally provide sound, subtitle and/or text options. If a channel provides one or more of these options, the respective symbol is displayed in the right corner of the information banner when calling up the channel. • for sound options • for subtitle options INFO for text options • It means that a sound, subtitle or text selection is available. How to use the options: Call up the desired channel. Press the key for audio selection, the key for subtitle selection or the INFO key for text selection. Settings 4.3 Press the MENU key to open the main menu. The menu item Box Settings is highlighted by default. Press OK.

14 Letterbox 16:9 Reduces fi lms in 16:9 mode for 4:3 format TV to scale, and for this purpose inserts two black bars above and below on the screen Pan & Scan / CCO Presents fi lms in the 16:9 format in a screen-fi lling manner. With regard to 4:3 TV, the left and right picture borders are cut off. Letterbox 14:9 This represents a compromise between the other two settings. Small black bars are inserted and only a bit of the left and right picture borders is cut off. Picture Scaling This option allows you to determine the scaling of the picture. The effect of a selected option is visible in the background instantly. If you have chosen 16:9 format, the next three picture scaling are available. Pillarbox Reduces the picture in 4:3 mode for 16:9 format TV to scale, and for this purpose inserts two black bars left and right on the screen. Zoom Presents the images in the 4:3 format in a screen-fi lling manner. Therefore, the top and bottom picture border is cut off. Automatic The scaling is automatic. If you have chosen 4:3 format, the next three picture scaling are available.

ENGLISH Note If the desired programme is not broadcast in the main audio language, the language used will be the second audio language. Subtitle Language Select a language for the subtitles. Subtitle Language #2 Select an additional subtitle language for the subtitles. Note If the desired programme is not available in the main subtitle language, the language used will be the second subtitle language. Subtitles Automatic Set this option to On if you want to automatically show broadcast subtitles in the selected caption language (by default, this option is set to Off). Menu Settings 4.6 Info Banner Duration With this option you defi ne for how long the information banner is displayed when you switch to another channel. If you never want the information banner to appear when changing channels, select None. If you want it to appear all the time, select Permanent. TV Output Format For the video output TV, the formats RGB, Video (CVBS) and S-Video (Y/C) are provided. Here RGB is the correct selection in most cases. VCR Output Format Here you can choose between Video (CVBS) and S-Video (Y/C). AFD Automatic The broadcast picture format may deviate from the picture format to be displayed. AFD recognizes and corrects the presentation if you choose On. Restore Default settings With this function, you reset the confi guration for the picture settings to predefi ned default values. In most cases they allow for an acceptable image and language reproduction. Language Settings 4.5 With this option, you set the language of the on-screen display (OSD). Audio Language Select the language broadcast for the programmes. Audio Language #2 Select an additional language broadcast for the programmes.

16 Notes If the Time Zone Adjustment is set • to Automatic, the Time zone and the Summertime / DST are defi ned automatically and thus not available. The Digital Terrestrial Receiver obtains the • information regarding summer time for the currently selected channel. Postcode Select your postcode. Audio Format This option provides mono and stereo formats for the audio output. Dolby Digital Automatic This option enables automatic detection of Dolby Digital audio channels. Two options are available: Off • if you only have connected a recorder device; On • if you have connected a Dolby Digital Home entertainment system. Sorting This option modifi es the appearance and behaviour of the channel lists. Restore Factory Settings 4.8 You can reset the device to default settings. Your Digital Terrestrial Receiver will have all its settings initialized like they were at fi rst installation. Info Banner Automatic When a new programme begins, the information banner is automatically shown as a default. If you want to remove this option, select Off. Note This option is only available if the value set under Info Banner Duration is at least 4 seconds. Menu Transparency With this option you set the transparency of the OSD. If you have diffi culties to read the OSD with transparent setting, select None. Miscellaneous Settings 4.7 Time Zone Adjustment With this option you can select whether the local time offset with regard to Greenwich mean time is to be set automatically, or if you want to specify it yourself. Time zone (GMT) Select the entry GMT +01:00 for Germany and Central Europe for example (time difference with regard to the Greenwich mean time). Summertime / DST Set the menu item summer time to Off if it is not summer time at the moment.

ENGLISH Main unit backside A TV scart* - Output to connect your TV set B VCR scart* - Output to connect your video recorder C Optical digital audio output* D L/R audio* - Left/Right analogue audio outputs E RF IN* - Input to connect your aerial cable from the wall socket F RF OUT* - Output to connect your receiver to a VCR/TV set/another receiver G Power supply* - Output to connect the AC adaptor * Safety extra low voltage Use more of your Digital 5 Terrestrial Receiver This chapter gives a complete description of the functionalities of your Digital Terrestrial Receiver. Digital Terrestrial Receiver full 5.1 overview Main unit Main unit backside Main unit A IR Receiver B Status led Green: the receiver is on Red: standby mode Blinking: software update in progress C Smart Card slot A C B A C D E F G B

18 5.2 Remote control full overview Remote control unit Remote control unit A - Switch on or to standby mode B c - Subtitle C TEXT (not applicable) / k Page up D l Page down E EPG - Open / Close the Programme Guide F Navigation keys - Move up/down, left/right OK: confi rm the selection G P

ENGLISH Notes The programme of the selected channel is • displayed in the background. The channel list remains opened for several seconds. During this time, you can select another channel by using the arrow keys, or press the OK key in order to close the channel list immediately. If the device is switched to radio mode, • you can also carry out the previously described actions in the same manner for the stored radio channels. Creating and Editing channel list 5.4 Sometimes the channel list may appear too complex or may contain channels that you are not interested to watch anymore. Via the main menu, you can edit and create your own favourite list. Press the MENU key. Select the third menu item Sort Channels using the arrow key or and then press OK. Select one of the Favourite lists using the arrow key or and then press OK. 5.3 Using channel list Press LIST/FAV to call up the channel list. Note If no other window on the screen is opened, you can also call up the channel list by pressing the OK key. This list contains all TV channels the device has found and stored during automatic channel scan. Note Press the LIST/FAV key again, the favourite list is displayed. This individual channel list only contains the channels you have chosen to be as your favourite channels. For further information on this, refer to chapter Defi ning channels as your Favourites. Favourites are marked with a star in the channel list. Observe the following to navigate through the channels Use • or to highlight the next or the previous channel in the list. Use • or to skip eight positions in the channel list respectively backwards or forwards. Use the • Page up / Page down keys to skip eight positions in the channel list respectively backwards or forwards. Press the OK key after you have selected the desired channel.

20 Note The previously described functions are also provided to you with regard to the radio channel list. Press the RADIO key to call up the overview of the radio channels. You can return to the TV channel list by pressing the RADIO key again. Shifting channels in the favourite list You can individually set the sequence of the channels within the channel list. Press the arrow key to highlight and edit the favourite list. Highlight the channel you want to shift using the arrow key or . Press the OK key to confi rm the channel to be shifted. Shift the highlighted channel to the desired position using the arrow key or . Press the OK key to store the channel at the desired position. Press the EXIT key to save. Press the OK key to save the changes. Deleting channels in the favourite list Press the arrow key to highlight and edit the favourite list. Highlight the channel you want to delete using the arrow key or . Press the red-coloured key Delete. To delete all the channels in the favourite list, press the yellow-coloured key Delete all. Press the EXIT key to save. Press the OK key to save the changes. Press the yellow key to access the fi lter options. You may fi lter the channel list by criteria such as free or scrambled broadcasts or by network / provider. You may sort the list by numbers or alphabetically. Use the arrow keys to navigate inside the Filter channels screen. Press the green key to lock a channel. A padlock appears next to the channel name. Note To be able to lock a channel, the Channel lock setting has to be active. Refer to chapter Security. Defi ning channels as your favourites The favourite list contains all channels you have defi ned as favourites. From this list, you can create a personalized channel list. Select the channel you want to indicate as a favourite using the arrow key or . Press the OK key to add the channel to the favourite list. A star indicates that the channel is in a favourite list. Repeat this process with all channels you want to indicate as favourites. After you have carried out the desired settings, press the EXIT key in order to close the window. Save the changes by pressing the OK key.

ENGLISH Press the OK key to start the automatic scan mode. Using or , choose whether: The channels found are to be added to the • old list (standard setting), The old channel list is to be overwritten, • The new found channels are to be • discarded. Press the OK key. Manual Search This type of scan mode enables the specifi c search for an individual channel. This is particularly interesting if you only want to include one individual channel into your channel list and you know the accurate information on the channel and frequency. Highlight Manual Search and then press OK. Extended installation 5.5 Press the MENU key. Highlight the second menu item Search for Channels using the arrow key or and then press OK. After the fi rst installation (refer to chapter Install), it may be required to search for channels again or to add specifi c channels that are additionally broadcast. Note In order to carry out an extended installation, you have to reset the device to its default settings. Refer to chapter Restoring Factory Settings. Two options are available. Automatic Search This scan mode is usually the appropriate one, because normally all channels are found automatically. Highlight Automatic Search and then press OK.

22 Notes Not all channels offer an extensive • EPG. Many broadcasting services broadcast the • current day programme but do not offer detailed descriptions. There are broadcasting services that do • not offer any EPG information. Due to the progressive technical • development, more and more broadcasting services will extend this offer in the future. Select the desired channel. Press the EPG key to call up the electronic programme guide. Close the EPG by pressing the EXIT key. EPG offers the following functions: If you require more information on a • programme, highlight it using the arrow key or and then press INFO. You can select programmes earlier or later • in the day using the arrow key or . Change to the programme of another • day using the green (next day) or the red button (previous day). If you want to adopt a programme into the • timer list, highlight it and press the TIMER key. Confi rm the request by selecting Yes and pressing the OK key. Note Detailed information on the Timer can be found in the next paragraph. Successively select the adjustable values using the arrow key or . The desired • Frequency is set with the arrow key or . The frequency in • MHz is entered via the numerical keys of the remote control. Choose whether All channels or channels that are Free to air only are to be searched for. Then highlight OK and press the OK key to start the manual scan mode. If some channels were found, the same • message as the one in the automatic scan mode will be displayed. Refer to previous paragraph. If no channel was found, a message will be • displayed. Press the OK key. EPG 5.6 The electronic programme guide (EPG) offers you an overview of all programmes to be broadcast in the coming week on the current channel.

ENGLISH Editing timer list During the normal programme replay, press the TIMER key to open the timer list. Deleting (a) programme(s) from the timer list Select the desired programme. Press the respective coloured key: Red: the selected programme is deleted • Yellow: all programmes are deleted. • Choose Yes using the arrow key . Press OK to confi rm the request. Timer editing In the Timer list, select the desired programme and press OK. Change the displayed settings by using the arrow and numerical keys. Then you can: Change the date (month and day) • Set the time (starting and end time) • The cycle (interesting for series and • regularly recurring programmes) Then highlight OK, and press the OK key. Timer 5.7 By means of the timer setting, you can switch your Digital Terrestrial Receiver on and off at a specifi c time. For example, it can allow a recording with a recorder device. The device then automatically switches on in the standby mode. If the device is already switched on, the device automatically switches to the selected programme. Note Remember to program your recorder device to the respective time. Adding a programme to timer list The timer function is included into the timer list via the EPG. Refer to previous paragraph. Open the EPG and highlight the desired programme. Press the TIMER key. By default, the answer to the confi rmation question is Yes. Press the OK key. The window is closed and the selected programme is stored in the timer list.

24 Carry out an initial installation. Refer to chapter Install. Displaying channel and system information / adjusting the antenna This function solely serves to supply information on one channel. However, you can use it for adjusting your antenna and for improving the television reception. Press the MENU key to access the main menu. Highlight the fourth menu item Technical Information using the arrow key or , and then press OK. By default, Channel Information is highlighted. Press OK. Adjust your antenna so that the two specifi cations Signal Strength and Signal Quality display a preferably high value. Note: Depending on your antenna, you can possibly carry out settings on your antenna. Press the EXIT key. Highlight System Information using the arrow key or and then press OK. Here you fi nd technical information on your device. This information normally is only relevant with regard to support. Press the EXIT key three times to return to the TV programme. Switching off current timer functions Note During a timer programme, no key is activated. To switch off the timer function: Press the Standby key . A programme message is displayed. Press the OK key. A message telling that the Timer is deleted appears. Miscellaneous functions 5.8 Restoring default settings You can reset the device to default settings. Your Digital Terrestrial Receiver will have all its settings initialized like there were at the fi rst installation. For example, all the favourite lists created will be deleted. Press the MENU key. By default, the item Box Settings is highlighted Press the OK key. Highlight the item Restore Factory Settings using the arrow key or , and then press OK. Set Yes by using and then press OK. The device carries out a reboot. It switches off, and shortly afterwards switches on again.

ENGLISH In order to view the TV programme again, press the RADIO key again. Security 5.10 Press the MENU key. Highlight the sixth menu item Security using the arrow key or and then press OK. Enter the PIN code. Notes The PIN code is set to 0000 at the • factory. Take into account the displayed information. It will help you to select the correct settings. Selecting and altering the settings is carried • out by means of the arrow keys. A displayed window can be closed by • pressing the EXIT key. Carrying out software update Note For this purpose, your Digital Terrestrial Receiver has to be set to standby mode. Every night between 1 am and 5 am, your Digital Terrestrial Receiver checks whether a software update is available. If a new software is available, you will receive a message, at the next switch on of your Digital Terrestrial Receiver to accept the update. Then the software update starts. You can also start the search process manually. Press the MENU key. Highlight Technical Information using the arrow key or and then press OK. Highlight System Information using the arrow key or and then press OK. Press OK to start the software update. Use the arrow key or to select Yes. Press OK to start the update. Radio 5.9 Note Digital radio programmes are not broadcast in all countries. In this case, a message indicating that the radio list is empty appears. If a digital radio programme is broadcast in your country, press the RADIO key to receive it.

Never use any abrasive cloth and aerosol cleaners. Replacement 6.2 The Digital Terrestrial Receiver does not contain any user-serviceable parts. Do not attempt to open it. All maintenance work must be carried out by qualifi ed service centres. Disposal 6.3 Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. Please inform yourself about the local separate collection process for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. The correct disposal of your old product will help prevent potential negative consequences for the environment and human health. Receiver Lock Set this option to On if you want to protect your complete device against unauthorized access. So, at the next switch on, the PIN code will be requested (the PIN code is set to 0000 at the factory). Menu lock Set this option to On if you want to protect your menus against unauthorized access. For the next activation of the menu, the PIN code will be requested (the PIN code is set to 0000 at the factory). Channel lock Set this option to On if you want to be able to lock a channel. These channels are PIN- protected. You can only watch them after entering the right PIN code. Refer to chapter Creating and Editing channel list. Change PIN This option allows you to specify your personal PIN code. Press the OK key. For this purpose, enter the Current PIN code and confi rm by pressing the OK key. Then, enter your New PIN code and then press OK. To confi rm your new PIN code, enter it again and then press OK. A confi rmation message is displayed. Press OK

ENGLISH Audio connection 7.2 Analogue connection Connect the L/R audio outputs of the Digital Terrestrial Receiver to the relevant input of your audio equipment using a double CINCH cable (not supplied). Consult the user manual of your audio equipment to choose the proper analogue audio inputs. Digital connection Connect the SPDIF output of the Digital Terrestrial Receiver to the relevant input of your audio equipment using a single CINCH cable (not supplied). Consult the user manual of your audio equipment to choose the proper digital audio input. Accessories and 7 connections Recorder connection 7.1 Connect the supplied scart cable to the VCR scart socket at the rear of the Digital Terrestrial Receiver and to the scart input EXT1 of the recorder. Connect the aerial cable from the wall socket to the RF IN socket at the rear of the Digital Terrestrial Receiver. Connect the RF OUT socket at the rear of the Digital Terrestrial Receiver to the ANT IN socket at the rear of the recorder using a coaxial cable. Connect the ANT OUT socket at the rear of your recorder to the RF input of your TV set using a coaxial cable. Connect a scart cable to the scart input of the TV set and to the TV scart socket at the rear of the Digital Terrestrial Receiver. Plug your Digital Terrestrial Receiver to the mains using the supplied power adaptor. Warning To be able to record digital television, you must make sure the Digital Terrestrial Receiver is on.

28 Guarantee and service 8 English Dear Customer, Thank you for purchasing this Philips product. For the Philips warranty applicable to this product, we refer you to the Philips website www.philips.com/guarantee. In the event you do not have an Internet connection, please contact your local Philips Consumer Care Centre. Contact details are given in the Consumer Care Centres list hereafter.

•Power consumption: 7 W •Standby power consumption: 5W Dimensions •Product dimensions (W x H x D): 240 x 44 x 145 mm •Carton dimensions (WxDxH): 305x245x65mm •Weight: 0.98 kg •Weight incl. Packaging: 1.78 kg Accessories •Included Accessories: Mains cord, Remote Control, User Manual, SCART cable •Batteries: 2 size AAA Tuner/Reception/Transmission •Demodulation type: COFDM 2K/8K, MPEG-2 DVB compliant, Network: MFN/SFN, QAM, QPSK •DVB: Terrestrial •Input frequency range: 474-862 MH Technical data 9 The product complies with the following European council Directive: 2006/95/CE. Specifi cations Connectivity •Terrestrial antenna interface: RF in, IEC 169-2, RF out, (bypass) IEC 169-2 •Audio Output - Digital: Optical (TOSLINK) •TV scart out: CVBS, RGB, Audio L/R •VCR scart out: Audio L/R, CVBS Convenience •Ease of Installation: Autoinstall •Parental control: Lock with PIN code, Child timer •Programmable Events: 8 •User Interface: Automatic program list update, Multiple subtitles supported, On Screen Display on TV, Software upgrade over the air, TV and Radio mode, Now & Next ESG, 7 day Electronic program Guide System Specifi cations •Flash memory size: 2 MB •Ram size: 16 MB SDRAM Video Decoding •Aspect Ratio: 16:9, 4:3 Letterbox, 4:3 Pan Scan •Compression Format: MPEG-2 MP@ML (std defi nition) •Conditional access system: Mediaguad(card not supplied), Subscription needed for pay-TV •Resolution: up to 720 x 576 interlaced •De-scrambling: Smart Card reader Audio Decoding •Compression format: MPEG layer I/II •Sound system: Dolby Digital Bitstream out, Mono, Stereo

30 Some radio stations cannot be received from time to time These services are not transmitted 24 hours a day and can sometimes be unavailable. This is not a fault. You have forgotten your PIN Code When prompted for your PIN Code, enter the Master PIN Code. This will allow you to proceed as well as reset the current PIN Code to its default value (default is 0000). The Master PIN Code is 8111. Keep this code secret to prevent others from using it. Installation No sound or picture but the front panel LED is lit in green Check the connections at the wall socket • and Digital Terrestrial Receiver Press • B on the remote control twice or press P+/P-. The picture on some channels seems to have been stretched or squashed. Check the Digital Terrestrial Receiver TV shape setting, following the information in paragraph Video Settings. If you have a wide screen TV, you may also need to check the settings on your TV. The display format being managed by the Digital Terrestrial Receiver, set your TV to “full screen” or to the similar equivalent setting (refer to the user manual of your TV set). The order of the channels has changed. Refer to chapter Miscellaneous Settings to change the order again. If none of the above suggestions seems to work, try unplugging your Set Top Box and then plugging it in again. If this does not work, contact either your supplier or a qualifi ed repair technician. Never attempt to repair your set top box yourself. Frequently asked 10 questions This chapter gives the most frequently asked questions and answers about your Digital Terrestrial Receiver. Connection On-screen display working but there is no reception Check the installation Intermittent reception Check all connections and cables The picture is not sharp and on-screen text is diffi cult to read Change the • TV scart output setting to RGB from the System settings screen Refer to your TV user manual • Use the scart cable supplied with the Digital • Terrestrial Receiver Set-up The LED on the front panel does not light up. Check that the AC adaptor is correctly • connected. Disconnect this cord and reconnect it to ensure it is in place Check that power is available at the wall • socket The remote control does not operate the Digital Terrestrial Receiver Make sure the Digital Terrestrial Receiver is • on Make sure you are pointing your remote • control at the front panel of the Digital Terrestrial Receiver Check the batteries in your remote control • You cannot fi nd all the channels you think should be available. Try re-tuning the device, following the relevant steps in chapter Install. If you are still missing channels, call your customer service adviser.

Surrey Phone: 0870 900 9070 (ps tn) Trademarks and partner logos Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. 100% recycled paper 100% papier recyclé

All rights reserved. Document order number: 3111 176 54421