ERNITEC Orion/2 Installation And User Instructions Manual

to revise and improve its products. All specifications are subject to change without notice. Notice To work with the High Speed Dome Cameras, any installer or technician must have the following minimum qualifications: • A basic knowledge of CCTV systems and components • A basic knowledge of electrical wiring and low-voltage electrical hookups • Have read this manual completely Copyright Under copyright laws, the contents of this user manual may not be copied, photocopied, translated, reproduced or reduced to any electronic medium or machine-readable format, in whole or in part, without prior written permission of the company. Important Information Before proceeding, please read and observe all instructions and warnings in this manual. Retain this manual with the original bill of sale for future reference and, if necessary, warranty service. When unpacking your unit, check for missing or damaged items. If any item is missing, or if damage is evident, DO NOT INSTALL OR OPERATE THIS PRODUCT. Contact your dealer for assistance. Regulation This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Do not abuse the camera. Avoid striking, shaking, etc. The camera could be damaged by improper handing or storage. • Do not disassemble the camera To prevent electric shock, do not remove screws or covers. There are no user serviceable parts inside. Ask a qualified service person for servicing. • Do not block cooling holes on the bracket This camera has a cooling fan inside. Blocking the cooling holes leads to build up of heat the camera and may cause malfunction. • Do not operate the camera beyond the specified temperature, humidity or power source ratings Use the camera under conditions where temperature is between -50°C ~ 50°C (-58°F ~ 122°F), and humidity is below 90%. • Do not use strong or abrasive detergents when cleaning the camera body Use a dry cloth to clean the camera when dirty. In case the dirt is hard to remove, use a mild detergent and wipe gently. • Never face the camera towards the sun Do not aim the camera at bright objects. Whether the camera is in use or not, never aim it at the sun or other extremely bright objects. Otherwise, the camera may be smeared or damaged.

1.1 Product Features............................................................................................................. 7 2. Connecting the High Speed Dome .......................................................................................... 8 2.1 Package Content............................................................................................................. 8 2.2 Switch Definition.............................................................................................................. 9 2.3 Communication Switch Setting........................................................................................ 9 2.4 Dome ID Setting............................................................................................................ 10 2.5 Dome Control Protocol.................................................................................................. 10 2.6 22-Pin Connector Definition ...........................................................................................11 2.7 Alarm Pin Definition....................................................................................................... 13 2.8 RS-485 Connector......................................................................................................... 13 3. Operation and Configuration ................................................................................................. 14 3.1 OSD Display Format ..................................................................................................... 14 3.2 OSD Menu Tree ............................................................................................................ 15 3.2.1 26x Model........................................................................................................ 15 3.2.2 22x / 23x Model ............................................................................................... 17 3.3 Configuration Menu....................................................................................................... 20 3.3.1 DEFAULT CAMERA ........................................................................................ 20 3.3.2 BACKLIGHT .................................................................................................... 21 3.3.3 FOCUS............................................................................................................ 21 3.3.4 APERTURE ..................................................................................................... 22 3.3.5 AE MODE........................................................................................................ 23 3.3.6 WBC MODE .................................................................................................... 24 3.3.7 ID DISPLAY ..................................................................................................... 25 3.3.8 SETUP MENU ................................................................................................. 26 FLIP (IMAGE/ME/OFF)............................................................................ 26 ZOOM SPEED......................................................................................... 27 SPEED BY ZOOM ................................................................................... 27 AUTO CALIBRATION .............................................................................. 27 DIGITAL ZOOM ....................................................................................... 27 SLOW SHUTTER .................................................................................... 28 ANGLE ADJUSTER................................................................................. 28 RESET..................................................................................................... 28 EXIT......................................................................................................... 28 3.3.9 SETUP MENU2 (26x Model Only)................................................................... 29 APERTURE ............................................................................................. 29 MASK DISPLAY....................................................................................... 29 3.3.10 TITLE DISPLAY............................................................................................... 29

3.3.12 ALARM SETTING............................................................................................ 30 3.3.13 HOME SETTING ............................................................................................. 32 3.3.14 SEQUENCE .................................................................................................... 33 3.3.15 AUTOPAN........................................................................................................ 35 3.3.16 CRUISE........................................................................................................... 36 3.3.17 IR FUNCTION (Removable IR Cut)................................................................. 37 3.3.18 ALARM DETECT (26x Model Only)................................................................. 38 3.3.19 WDR Setting (23x Model Only) ....................................................................... 39 3.3.20 PRIVACY ......................................................................................................... 40 3.3.21 TIME FUNCTION ............................................................................................ 43 3.3.22 SCHEDULE FUNCTION ................................................................................. 43 3.3.23 EXIT OSD........................................................................................................ 44 Appendix A: Technical Specification .......................................................................................... 45 Appendix B: Ernitec ERNA .......................................................................................................... 46 Using System X Keyboards Series K111....................................................................... 46 Using System 1000M Keyboards 1501M/1503M/1504M or 1505M.............................. 46 Operation....................................................................................................................... 47 Appendix C: Protocol-Pelco ........................................................................................................ 48 Appendix D: Philips Allegiant ...................................................................................................... 50 OSD Menu Notes........................................................................................................................... 51 26x Model...................................................................................................................... 51 22/23x Models............................................................................................................... 53

deliver superb performance and durability with an intelligent and stylish housing that is suitable in any security and surveillance installation. Orion/2 series dome cameras support one cabling for easy installation, and can be integrated with CCTV products, such as DVRs, Control Keyboards, and CCTV accessories for a total surveillance solution. The Integrated High Speed Dome Camera provides 3 models of new generation advanced DSP color camera, with the following camera options: 26× optical zoom with additional digital zoom 23× optical zoom with additional digital zoom 22× optical zoom with additional digital zoom The dome delivers the power of up to 312x zoom to allow dome cameras to capture clear image in the distance. Continuous Auto Focus, Back Light Compensation, Auto Exposure, Digital Slow Shutter functions are provided for clear and high quality image. IR cut filter removable ensures 24 hours operation; more Privacy Masks are specially designed to avoid any intrusive monitoring at specific region. Wide Dynamic Range function, are some of the features incorporated to fit your needs. The Home function allows user to specify a preset position as the ‘home position’ or functions (Sequence/Auto-pan/Cruise), dome camera can come back to home position or functions when the user stops to control the camera for a user defined period of time. Additionally, the unique Scheduling feature, enables users to program a preset point or function (Sequence/Auto-pan/Cruise) automatically actions in certain period of time. The dome provides variable pan/tilt speeds ranging from a fast patrol of 400° per second to a slow ramble of 5° per second with 0.225° pan accuracy for fast and accurate tracking ability. The 360° endless rotation and -10°~190° tilt travel makes tracking the object passing directly beneath the dome. Maximum 256 preset points can be programmed for precise location of target areas, and you can also define 8 tours, 4 auto-pan and 1 cruise routes for the camera to operate automatically. RS-485 communication port is available for remote control purposes. The Integrated High Speed Dome Camera provides 8 alarm inputs and 2 alarm output, and the smart alarm management mechanism can be programmed through OSD setup menu; certain function (Preset/Sequence/Auto-Pan/Cruise) can be activated when an alarm is triggered.

built-in protocols include Ernitec, Pelco, VCL, Philips, AD-422 (Manchester), etc, which allow the Orion/2 High Speed Dome Camera series to be integrated with a wide range of surveillance systems. 1.1 Product Features Precise and Accurate Tracking • Auto Calibration • Scheduling Functions • Pan driver accuracy of 0.225° • Preset speed up to 400°/sec. • Pan & Tilt proportional to Zoom Ratio • 256 Preset Position/8 Sequence /4 Auto-Pan /1 Cruise Day/Night Features • Removable IR Cut Filter (23x and 26x Model) Low-Light Applications • Minimum illumination 0.01 Lux with Slow Shutter • Digital Slow Shutter • Electronic Shutter Perfect Contrast Solution for High Image Quality • Wide Dynamic Range (23x Model) • Auto White Balance • Auto Gain Control • Backlight Compensation • Auto Iris Control Multiple Built-in Protocols Enhanced High Compatibility • Ernitec • Pelco D & P • VCL • Philips • AD/AD-422 • Chiper Privacy Mask for Privacy Protection • Up to 24 privacy zones of camera view programmable Dynamic Dome Configuration • Flexible In/Outdoor mountings • Compact lightweight design for easy installation • Weather resistant housing for temperature, sun ray, and rain

Please refer to the following sections to connect, set and operate the dome camera. In order to control the integrated high speed dome, basically a control keyboard or other control device is required. 2.1 Package Content Before proceeding, please check the box contains the items listed here. If any item is missing, or if damage is evident, DO NOT install or operate the product and contact your dealer for assistance. 50-cm Data Cable for power supply, video and telemetry Lubricant Dome Body 50-cm, 13-pin Alarm Cable Screws Optical Cover Water-proof rubber User’s Manual and Quick Guide

connecting the dome camera to other devices. The switches used for configuring these settings are located on the bottom of the dome camera. Outdoor Dome A Reserved B Communication Switch C Dome ID Switch D Dome Control Protocol Switch E RJ-45 Connector (Reserved) F 22-Pin Connector 2.3 Communication Switch Setting The table below shows the function of each pin within the Communication Switch. Communication Switch Pin 1 Pin 2 RS-485 Setting Pin 3 Termination Pin 4 Line Lock Pin 5 System Initialization (for upgrade) Pin 6 Reserved

for this reason, the RS-485 setup of the dome and the control device must be the same. The RS-485 default setting is half-duplex (see the diagram as follows). Please do not change the default setting without qualified specialist or supplier’s notice. As for the Pin 3 and Pin 4, they are used for termination and Line Lock adjustment respectively. The Pin 5 is mainly used after firmware upgrade. RS-485 Setting Half-duplex Full-duplex 2.4 Dome ID Setting Use the switch to change your speed dome ID by turning the arrow to the desired number respectively. For instance, if the dome ID is 123, the ID switch should be set as below. NOTE: No two domes should be given the same ID, or communication conflict may occur. centesimal decimal single digit NOTE: The number “0” should locate upwards as shown in above diagram for correct switch definition. 2.5 Dome Control Protocol Protocol is a specific set of rules, procedures used for data communications. Basing on the devices of your surveillance system and define the protocol you are going to use. Generally, use one protocol even the devices are provided from different manufacturers. Use the switch to set your dome control protocol and the baud rate. Refer to below table and turn the arrow to choose a protocol for your speed dome.

Select protocol: Pelco D, for instance, the ID switch should be set as below. decimal single digit 2.6 22-Pin Connector Definition A 50-cm data cable (shown as the figure below) is shipped with the integrated high speed dome for quick installation for demo or testing usage. Additionaly, the section will also provide the definition of each pin within the 22-pin connector on the data cable.

No. Pin Cable 1 AC24-1 20AWG 2 Alarm Pin (Not wired) 3 AC24-2 20AWG 4 Alarm Pin (Not wired) 5 FG 20AWG 6 Alarm Pin (Not wired) 7 Tx+ 8 Rx- 9 Tx- 10 Rx+ 24AWG 11~20 Alarm Pin (Not wired) 21 VGND 22 Video 24AWG

The alarm pins are serviceable for connecting alarm in- and output devices. Following lists the definition of alarm pin on the 22-pin connector located on the bottom of the dome camera. A 50-cm alarm cable is delivered with outdoor dome ZH811 for connecting alarm in- and output devices. Refer to section 2.1 Package Content. Pin Definition Pin Definition 2 ALM NO 15 ALM-4 4 ALM NC 16 ALM-5 6 ALM COM 17 ALM-6 11 ISOG 18 ALM-7 12 ALM-1 19 ALM-8 13 ALM-3 20 ALM GND 14 ALM-2 2.8 RS-485 Connector RS-485 is the interface that communicates the dome camera and its control device. Please connect control keyboard to speed dome through the terminal block. The recommended cables for RS-485 communication are CAT 5 cables; maximum cable length for over 24-gauge wire is 4000 feet (1219 meters). If the total cable length is over 4000 feet, using a repeater to enlarge the signals is recommended. Pin Corresponding Pins (22-Pin Connector) Definition 1 7,10 Tx+, Rx+ (D+) 2 Reserved 3 Reserved 4 Reservied 5 8,9 Tx-, Rx- (D-) For connection to Ernitec equipment, use Rx+ and Rx-

3.1 OSD Display Format The information shown on the screen are described in terms of OSD display, position and function description in the table below. 1 2 3 4 5 6 Position Function OSD Display Description A Auto Focus Mode 1 Focus Modes M Manual Focus Mode X Back Light Compensation OFF 2 Backlight B Back Light Compensation ON 3 Alarm ALARM Alarm Message 4 Zoom Ratio ×1 Present Zoom Ratio (Optical ZoomÆDigital Zoom) 5 Title • Maximum 20 characters for each title. • 16 sets of title are available. 6 Camera ID Show the camera ID

The OSD setup menu structure of E/F/U and R/K model are listed seperately in the following section. Ths star symbol indicates the factory default. For detailed function description, please see section 3.3 Configuration Menu. 3.2.1 26x Model Item Layer 1 Layer 2 Layer 3 Default DEFAULT CAMERA , ON BACKLIGHT , OFF AUTO AF Mode , , Normal FOCUS MANUAL Focus Manual Speed <01>~<08> AUTO Exposure Comp. , <1>~<15> OFF BRIGHT Bright <0> ~ <31> SHUTTER Shutter Speed <1> ~ <1/10000> Sec. GAIN Gain <-3> ~ <28>dB AE MODE IRIS Iris , ~ AUTO (Auto White Balance) ☆ INDOOR OUTDOOR ATW (Auto-tracing WBC) R Gain <000> ~ <128> WBC MODE MANUAL B Gain <000> ~ <128> ID DISPLAY , ON FLIP , , OFF ZOOM SPEED <1> ~ <8> 8 SPEED BY ZOOM , OFF AUTO CALI. , OFF DIGITAL ZOOM , ON SLOW SHUTTER , OFF ADJUST MIN ANGLE 00 ADJUST MAX ANGLE 90 ANGLE ADJUSTER RESET RESET SETUP MENU 1 EXIT APERTURE <01> ~ <16> 01 SETUP MENU 2 MASK DISPLAY , First TITLE DISPLAY , OFF TITLE SETTING <01> ~ <16> 01 ALARM PIN <1> ~ <8> 1 ALARM SWITCH , OFF ALARM TYPE (Normal Open), (Normal Close) N.C. PRESET ☆ SEQUENCE AUTOPAN ALARM ACTION CRUISE PRESET POINT SEQUENCE LINE AUTOPAN LINE CRUISE LINE <001> ~ <256> <1> ~ <8> <1> ~ <4> <1> 001 DWELL TIME <001> ~ <127> Sec., ALWAYS ALARM SETTNG EXIT YES

<1> ~ <8> <1> ~ <4> <1> 001 RETURN TIME <001> ~ <128> Min. 001 GO ENTER HOME SETTING EXIT SEQUENCE LINE <1> ~ <8> 1 SEQUENCE POINT <01> ~ <32> 01 PRESET POS. <001> ~ <256> 001 SPEED <01> ~ <15> 01 DWELL TIME <000> ~ <127> Sec. 000 RUN SEQUNECE SEQUENCE EXIT AUTOPAN LINE <1> ~ <4> 1 START POINT , END POINT , DIRECTION , Right SPEED <01> ~ <04> 01 RUN AUTOPAN AUTOPAN EXIT RECORD START RECORD END RUN CRUISE CRUISE EXIT IR FUNCTION , Auto DETECT SWITCH , OFF DETECT MODE , , , Int. Focus ALARM DETECT EXIT PRIVACY SWITCH , OFF TRANSPARENCY , OFF COLOR , , , , , , , , , Black H CENTER , V CENTER , H SIZE <00> ~ <80> SET MASK <01> ~ <24> V SIZE <00> ~ <60> PRIVACY EXIT YES TIME DISPLAY , OFF SET YEAR SET MONTH SET DAY SET HOUR SET MINUTE TIME EXIT+SAVE SCHEDULE SW. , OFF SCHEDULE POINT <01> ~ <32> 01 SCHEDULE HOUR 00 SCHEDULE MIN 00 NONE ☆ PRESET SCHEDULE SCHEDULE MODE SEQUENCE